| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2008-2011 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <env.h> |
| #include <log.h> |
| #include <asm/global_data.h> |
| #include <asm/processor.h> |
| #include <env.h> |
| #include <ioports.h> |
| #include <lmb.h> |
| #include <asm/io.h> |
| #include <asm/mmu.h> |
| #include <asm/fsl_law.h> |
| #include <fsl_ddr_sdram.h> |
| #include <linux/delay.h> |
| #include "mp.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| u32 fsl_ddr_get_intl3r(void); |
| |
| extern u32 __spin_table[]; |
| |
| u32 get_my_id() |
| { |
| return mfspr(SPRN_PIR); |
| } |
| |
| /* |
| * Determine if U-Boot should keep secondary cores in reset, or let them out |
| * of reset and hold them in a spinloop |
| */ |
| int hold_cores_in_reset(int verbose) |
| { |
| /* Default to no, overridden by 'y', 'yes', 'Y', 'Yes', or '1' */ |
| if (env_get_yesno("mp_holdoff") == 1) { |
| if (verbose) { |
| puts("Secondary cores are being held in reset.\n"); |
| puts("See 'mp_holdoff' environment variable\n"); |
| } |
| |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| int cpu_reset(u32 nr) |
| { |
| volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR); |
| out_be32(&pic->pir, 1 << nr); |
| /* the dummy read works around an errata on early 85xx MP PICs */ |
| (void)in_be32(&pic->pir); |
| out_be32(&pic->pir, 0x0); |
| |
| return 0; |
| } |
| |
| int cpu_status(u32 nr) |
| { |
| u32 *table, id = get_my_id(); |
| |
| if (hold_cores_in_reset(1)) |
| return 0; |
| |
| if (nr == id) { |
| table = (u32 *)&__spin_table; |
| printf("table base @ 0x%p\n", table); |
| } else if (is_core_disabled(nr)) { |
| puts("Disabled\n"); |
| } else { |
| table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY; |
| printf("Running on cpu %d\n", id); |
| printf("\n"); |
| printf("table @ 0x%p\n", table); |
| printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]); |
| printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]); |
| printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_FSL_CORENET |
| int cpu_disable(u32 nr) |
| { |
| volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| |
| setbits_be32(&gur->coredisrl, 1 << nr); |
| |
| return 0; |
| } |
| |
| int is_core_disabled(int nr) { |
| ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| u32 coredisrl = in_be32(&gur->coredisrl); |
| |
| return (coredisrl & (1 << nr)); |
| } |
| #else |
| int cpu_disable(u32 nr) |
| { |
| volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| |
| switch (nr) { |
| case 0: |
| setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU0); |
| break; |
| case 1: |
| setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU1); |
| break; |
| default: |
| printf("Invalid cpu number for disable %d\n", nr); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| int is_core_disabled(int nr) { |
| ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| u32 devdisr = in_be32(&gur->devdisr); |
| |
| switch (nr) { |
| case 0: |
| return (devdisr & MPC85xx_DEVDISR_CPU0); |
| case 1: |
| return (devdisr & MPC85xx_DEVDISR_CPU1); |
| default: |
| printf("Invalid cpu number for disable %d\n", nr); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static u8 boot_entry_map[4] = { |
| 0, |
| BOOT_ENTRY_PIR, |
| BOOT_ENTRY_R3_LOWER, |
| }; |
| |
| int cpu_release(u32 nr, int argc, char *const argv[]) |
| { |
| u32 i, val, *table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY; |
| u64 boot_addr; |
| |
| if (hold_cores_in_reset(1)) |
| return 0; |
| |
| if (nr == get_my_id()) { |
| printf("Invalid to release the boot core.\n\n"); |
| return 1; |
| } |
| |
| if (argc != 4) { |
| printf("Invalid number of arguments to release.\n\n"); |
| return 1; |
| } |
| |
| boot_addr = simple_strtoull(argv[0], NULL, 16); |
| |
| /* handle pir, r3 */ |
| for (i = 1; i < 3; i++) { |
| if (argv[i][0] != '-') { |
| u8 entry = boot_entry_map[i]; |
| val = simple_strtoul(argv[i], NULL, 16); |
| table[entry] = val; |
| } |
| } |
| |
| table[BOOT_ENTRY_ADDR_UPPER] = (u32)(boot_addr >> 32); |
| |
| /* ensure all table updates complete before final address write */ |
| eieio(); |
| |
| table[BOOT_ENTRY_ADDR_LOWER] = (u32)(boot_addr & 0xffffffff); |
| |
| return 0; |
| } |
| |
| u32 determine_mp_bootpg(unsigned int *pagesize) |
| { |
| u32 bootpg; |
| #ifdef CONFIG_SYS_FSL_ERRATUM_A004468 |
| u32 svr = get_svr(); |
| u32 granule_size, check; |
| struct law_entry e; |
| #endif |
| |
| |
| /* use last 4K of mapped memory */ |
| bootpg = ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? |
| CONFIG_MAX_MEM_MAPPED : gd->ram_size) + |
| CONFIG_SYS_SDRAM_BASE - 4096; |
| if (pagesize) |
| *pagesize = 4096; |
| |
| #ifdef CONFIG_SYS_FSL_ERRATUM_A004468 |
| /* |
| * Erratum A004468 has two parts. The 3-way interleaving applies to T4240, |
| * to be fixed in rev 2.0. The 2-way interleaving applies to many SoCs. But |
| * the way boot page chosen in u-boot avoids hitting this erratum. So only |
| * thw workaround for 3-way interleaving is needed. |
| * |
| * To make sure boot page translation works with 3-Way DDR interleaving |
| * enforce a check for the following constrains |
| * 8K granule size requires BRSIZE=8K and |
| * bootpg >> log2(BRSIZE) %3 == 1 |
| * 4K and 1K granule size requires BRSIZE=4K and |
| * bootpg >> log2(BRSIZE) %3 == 0 |
| */ |
| if (SVR_SOC_VER(svr) == SVR_T4240 && SVR_MAJ(svr) < 2) { |
| e = find_law(bootpg); |
| switch (e.trgt_id) { |
| case LAW_TRGT_IF_DDR_INTLV_123: |
| granule_size = fsl_ddr_get_intl3r() & 0x1f; |
| if (granule_size == FSL_DDR_3WAY_8KB_INTERLEAVING) { |
| if (pagesize) |
| *pagesize = 8192; |
| bootpg &= 0xffffe000; /* align to 8KB */ |
| check = bootpg >> 13; |
| while ((check % 3) != 1) |
| check--; |
| bootpg = check << 13; |
| debug("Boot page (8K) at 0x%08x\n", bootpg); |
| break; |
| } else { |
| bootpg &= 0xfffff000; /* align to 4KB */ |
| check = bootpg >> 12; |
| while ((check % 3) != 0) |
| check--; |
| bootpg = check << 12; |
| debug("Boot page (4K) at 0x%08x\n", bootpg); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| #endif /* CONFIG_SYS_FSL_ERRATUM_A004468 */ |
| |
| return bootpg; |
| } |
| |
| phys_addr_t get_spin_phys_addr(void) |
| { |
| return virt_to_phys(&__spin_table); |
| } |
| |
| #ifdef CONFIG_FSL_CORENET |
| static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) |
| { |
| u32 cpu_up_mask, whoami, brsize = LAW_SIZE_4K; |
| u32 *table = (u32 *)&__spin_table; |
| volatile ccsr_gur_t *gur; |
| volatile ccsr_local_t *ccm; |
| volatile ccsr_rcpm_t *rcpm; |
| volatile ccsr_pic_t *pic; |
| int timeout = 10; |
| u32 mask = cpu_mask(); |
| struct law_entry e; |
| |
| gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR); |
| rcpm = (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR); |
| pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR); |
| |
| whoami = in_be32(&pic->whoami); |
| cpu_up_mask = 1 << whoami; |
| out_be32(&ccm->bstrl, bootpg); |
| |
| e = find_law(bootpg); |
| /* pagesize is only 4K or 8K */ |
| if (pagesize == 8192) |
| brsize = LAW_SIZE_8K; |
| out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | brsize); |
| debug("BRSIZE is 0x%x\n", brsize); |
| |
| /* readback to sync write */ |
| in_be32(&ccm->bstrar); |
| |
| /* disable time base at the platform */ |
| out_be32(&rcpm->ctbenrl, cpu_up_mask); |
| |
| out_be32(&gur->brrl, mask); |
| |
| /* wait for everyone */ |
| while (timeout) { |
| unsigned int i, cpu, nr_cpus = cpu_numcores(); |
| |
| for_each_cpu(i, cpu, nr_cpus, mask) { |
| if (table[cpu * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER]) |
| cpu_up_mask |= (1 << cpu); |
| } |
| |
| if ((cpu_up_mask & mask) == mask) |
| break; |
| |
| udelay(100); |
| timeout--; |
| } |
| |
| if (timeout == 0) |
| printf("CPU up timeout. CPU up mask is %x should be %x\n", |
| cpu_up_mask, mask); |
| |
| /* enable time base at the platform */ |
| out_be32(&rcpm->ctbenrl, 0); |
| |
| /* readback to sync write */ |
| in_be32(&rcpm->ctbenrl); |
| |
| mtspr(SPRN_TBWU, 0); |
| mtspr(SPRN_TBWL, 0); |
| |
| out_be32(&rcpm->ctbenrl, mask); |
| |
| #ifdef CONFIG_MPC8xxx_DISABLE_BPTR |
| /* |
| * Disabling Boot Page Translation allows the memory region 0xfffff000 |
| * to 0xffffffff to be used normally. Leaving Boot Page Translation |
| * enabled remaps 0xfffff000 to SDRAM which makes that memory region |
| * unusable for normal operation but it does allow OSes to easily |
| * reset a processor core to put it back into U-Boot's spinloop. |
| */ |
| clrbits_be32(&ccm->bstrar, LAW_EN); |
| #endif |
| } |
| #else |
| static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) |
| { |
| u32 up, cpu_up_mask, whoami; |
| u32 *table = (u32 *)&__spin_table; |
| volatile u32 bpcr; |
| volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); |
| volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR); |
| u32 devdisr; |
| int timeout = 10; |
| |
| whoami = in_be32(&pic->whoami); |
| out_be32(&ecm->bptr, 0x80000000 | (bootpg >> 12)); |
| |
| /* disable time base at the platform */ |
| devdisr = in_be32(&gur->devdisr); |
| if (whoami) |
| devdisr |= MPC85xx_DEVDISR_TB0; |
| else |
| devdisr |= MPC85xx_DEVDISR_TB1; |
| out_be32(&gur->devdisr, devdisr); |
| |
| /* release the hounds */ |
| up = ((1 << cpu_numcores()) - 1); |
| bpcr = in_be32(&ecm->eebpcr); |
| bpcr |= (up << 24); |
| out_be32(&ecm->eebpcr, bpcr); |
| asm("sync; isync; msync"); |
| |
| cpu_up_mask = 1 << whoami; |
| /* wait for everyone */ |
| while (timeout) { |
| int i; |
| for (i = 0; i < cpu_numcores(); i++) { |
| if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER]) |
| cpu_up_mask |= (1 << i); |
| }; |
| |
| if ((cpu_up_mask & up) == up) |
| break; |
| |
| udelay(100); |
| timeout--; |
| } |
| |
| if (timeout == 0) |
| printf("CPU up timeout. CPU up mask is %x should be %x\n", |
| cpu_up_mask, up); |
| |
| /* enable time base at the platform */ |
| if (whoami) |
| devdisr |= MPC85xx_DEVDISR_TB1; |
| else |
| devdisr |= MPC85xx_DEVDISR_TB0; |
| out_be32(&gur->devdisr, devdisr); |
| |
| /* readback to sync write */ |
| in_be32(&gur->devdisr); |
| |
| mtspr(SPRN_TBWU, 0); |
| mtspr(SPRN_TBWL, 0); |
| |
| devdisr &= ~(MPC85xx_DEVDISR_TB0 | MPC85xx_DEVDISR_TB1); |
| out_be32(&gur->devdisr, devdisr); |
| |
| #ifdef CONFIG_MPC8xxx_DISABLE_BPTR |
| /* |
| * Disabling Boot Page Translation allows the memory region 0xfffff000 |
| * to 0xffffffff to be used normally. Leaving Boot Page Translation |
| * enabled remaps 0xfffff000 to SDRAM which makes that memory region |
| * unusable for normal operation but it does allow OSes to easily |
| * reset a processor core to put it back into U-Boot's spinloop. |
| */ |
| clrbits_be32(&ecm->bptr, 0x80000000); |
| #endif |
| } |
| #endif |
| |
| void cpu_mp_lmb_reserve(struct lmb *lmb) |
| { |
| u32 bootpg = determine_mp_bootpg(NULL); |
| |
| lmb_reserve(lmb, bootpg, 4096); |
| } |
| |
| void setup_mp(void) |
| { |
| extern u32 __secondary_start_page; |
| extern u32 __bootpg_addr, __spin_table_addr, __second_half_boot_page; |
| |
| int i; |
| ulong fixup = (u32)&__secondary_start_page; |
| u32 bootpg, bootpg_map, pagesize; |
| |
| bootpg = determine_mp_bootpg(&pagesize); |
| |
| /* |
| * pagesize is only 4K or 8K |
| * we only use the last 4K of boot page |
| * bootpg_map saves the address for the boot page |
| * 8K is used for the workaround of 3-way DDR interleaving |
| */ |
| |
| bootpg_map = bootpg; |
| |
| if (pagesize == 8192) |
| bootpg += 4096; /* use 2nd half */ |
| |
| /* Some OSes expect secondary cores to be held in reset */ |
| if (hold_cores_in_reset(0)) |
| return; |
| |
| /* |
| * Store the bootpg's cache-able half address for use by secondary |
| * CPU cores to continue to boot |
| */ |
| __bootpg_addr = (u32)virt_to_phys(&__second_half_boot_page); |
| |
| /* Store spin table's physical address for use by secondary cores */ |
| __spin_table_addr = (u32)get_spin_phys_addr(); |
| |
| /* flush bootpg it before copying invalidate any staled cacheline */ |
| flush_cache(bootpg, 4096); |
| |
| /* look for the tlb covering the reset page, there better be one */ |
| i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1); |
| |
| /* we found a match */ |
| if (i != -1) { |
| /* map reset page to bootpg so we can copy code there */ |
| disable_tlb(i); |
| |
| set_tlb(1, CONFIG_BPTR_VIRT_ADDR, bootpg, /* tlb, epn, rpn */ |
| MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ |
| 0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */ |
| |
| memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096); |
| |
| plat_mp_up(bootpg_map, pagesize); |
| } else { |
| puts("WARNING: No reset page TLB. " |
| "Skipping secondary core setup\n"); |
| } |
| } |