| /* |
| * (C) Copyright 2001 |
| * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #if defined(VXWORKS) |
| #include <stdio.h> |
| #include <string.h> |
| #define CONFIG_SYS_DEF_EEPROM_ADDR 0xa0 |
| extern char iicReadByte(char, char); |
| extern ulong_t crc32(unsigned char *, unsigned long); |
| #else |
| #include <common.h> |
| #endif |
| |
| #include "vpd.h" |
| |
| /* |
| * vpd_reader() - reads VPD data from I2C EEPROMS. |
| * returns pointer to buffer or NULL. |
| */ |
| static unsigned char *vpd_reader(unsigned char *buf, unsigned dev_addr, |
| unsigned off, unsigned count) |
| { |
| unsigned offset = off; /* Calculated offset */ |
| |
| /* |
| * The main board EEPROM contains |
| * SDRAM SPD in the first 128 bytes, |
| * so skew the offset. |
| */ |
| if (dev_addr == CONFIG_SYS_DEF_EEPROM_ADDR) |
| offset += SDRAM_SPD_DATA_SIZE; |
| |
| /* Try to read the I2C EEPROM */ |
| #if defined(VXWORKS) |
| { |
| int i; |
| |
| for (i = 0; i < count; ++i) |
| buf[i] = iicReadByte(dev_addr, offset + i); |
| } |
| #else |
| if (eeprom_read(dev_addr, offset, buf, count)) { |
| printf("Failed to read %d bytes from VPD EEPROM 0x%x @ 0x%x\n", |
| count, dev_addr, offset); |
| return NULL; |
| } |
| #endif |
| |
| return buf; |
| } |
| |
| |
| /* |
| * vpd_get_packet() - returns next VPD packet or NULL. |
| */ |
| static vpd_packet_t *vpd_get_packet(vpd_packet_t * vpd_packet) |
| { |
| vpd_packet_t *packet = vpd_packet; |
| |
| if (packet != NULL) { |
| if (packet->identifier == VPD_PID_TERM) |
| return NULL; |
| else |
| packet = (vpd_packet_t *) ((char *) packet + |
| packet->size + 2); |
| } |
| |
| return packet; |
| } |
| |
| |
| /* |
| * vpd_find_packet() - Locates and returns the specified |
| * VPD packet or NULL on error. |
| */ |
| static vpd_packet_t *vpd_find_packet(vpd_t * vpd, unsigned char ident) |
| { |
| vpd_packet_t *packet = (vpd_packet_t *) &vpd->packets; |
| |
| /* Guaranteed illegal */ |
| if (ident == VPD_PID_GI) |
| return NULL; |
| |
| /* Scan tuples looking for a match */ |
| while ((packet->identifier != ident) && |
| (packet->identifier != VPD_PID_TERM)) |
| packet = vpd_get_packet(packet); |
| |
| /* Did we find it? */ |
| if ((packet->identifier) && (packet->identifier != ident)) |
| return NULL; |
| return packet; |
| } |
| |
| |
| /* |
| * vpd_is_valid() - Validates contents of VPD data |
| * in I2C EEPROM. Returns 1 for |
| * success or 0 for failure. |
| */ |
| static int vpd_is_valid(unsigned dev_addr, unsigned char *buf) |
| { |
| unsigned num_bytes; |
| vpd_packet_t *packet; |
| vpd_t *vpd = (vpd_t *) buf; |
| unsigned short stored_crc16, calc_crc16 = 0xffff; |
| |
| /* Check Eyecatcher */ |
| if (strncmp |
| ((char *) (vpd->header.eyecatcher), VPD_EYECATCHER, |
| VPD_EYE_SIZE) != 0) { |
| unsigned offset = 0; |
| |
| if (dev_addr == CONFIG_SYS_DEF_EEPROM_ADDR) |
| offset += SDRAM_SPD_DATA_SIZE; |
| printf("Error: VPD EEPROM 0x%x corrupt @ 0x%x\n", dev_addr, |
| offset); |
| |
| return 0; |
| } |
| |
| /* Check Length */ |
| if (vpd->header.size > VPD_MAX_EEPROM_SIZE) { |
| printf("Error: VPD EEPROM 0x%x contains bad size 0x%x\n", |
| dev_addr, vpd->header.size); |
| return 0; |
| } |
| |
| /* Now find the termination packet */ |
| packet = vpd_find_packet(vpd, VPD_PID_TERM); |
| if (packet == NULL) { |
| printf("Error: VPD EEPROM 0x%x missing termination packet\n", |
| dev_addr); |
| return 0; |
| } |
| |
| /* Calculate data size */ |
| num_bytes = (unsigned long) ((unsigned char *) packet - |
| (unsigned char *) vpd + |
| sizeof(vpd_packet_t)); |
| |
| /* Find stored CRC and clear it */ |
| packet = vpd_find_packet(vpd, VPD_PID_CRC); |
| if (packet == NULL) { |
| printf("Error: VPD EEPROM 0x%x missing CRC\n", dev_addr); |
| return 0; |
| } |
| stored_crc16 = *((ushort *) packet->data); |
| *(ushort *) packet->data = 0; |
| |
| /* OK, lets calculate the CRC and check it */ |
| #if defined(VXWORKS) |
| calc_crc16 = (0xffff & crc32(buf, num_bytes)); |
| #else |
| calc_crc16 = (0xffff & crc32(0, buf, num_bytes)); |
| #endif |
| /* Now restore the CRC */ |
| *(ushort *) packet->data = stored_crc16; |
| if (stored_crc16 != calc_crc16) { |
| printf("Error: VPD EEPROM 0x%x has bad CRC 0x%x\n", |
| dev_addr, stored_crc16); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| |
| /* |
| * size_ok() - Check to see if packet size matches |
| * size of data we want. Returns 1 for |
| * good match or 0 for failure. |
| */ |
| static int size_ok(vpd_packet_t *packet, unsigned long size) |
| { |
| if (packet->size != size) { |
| printf("VPD Packet 0x%x corrupt.\n", packet->identifier); |
| return 0; |
| } |
| return 1; |
| } |
| |
| |
| /* |
| * strlen_ok() - Check to see if packet size matches |
| * strlen of the string we want to populate. |
| * Returns 1 for valid length or 0 for failure. |
| */ |
| static int strlen_ok(vpd_packet_t *packet, unsigned long length) |
| { |
| if (packet->size >= length) { |
| printf("VPD Packet 0x%x corrupt.\n", packet->identifier); |
| return 0; |
| } |
| return 1; |
| } |
| |
| |
| /* |
| * get_vpd_data() - populates the passed VPD structure 'vpdInfo' |
| * with data obtained from the specified |
| * I2C EEPROM 'dev_addr'. Returns 0 for |
| * success or 1 for failure. |
| */ |
| int vpd_get_data(unsigned char dev_addr, VPD *vpdInfo) |
| { |
| unsigned char buf[VPD_EEPROM_SIZE]; |
| vpd_t *vpd = (vpd_t *) buf; |
| vpd_packet_t *packet; |
| |
| if (vpdInfo == NULL) |
| return 1; |
| |
| /* |
| * Fill vpdInfo with 0s to blank out |
| * unused fields, fill vpdInfo->ethAddrs |
| * with all 0xffs so that other's code can |
| * determine how many real Ethernet addresses |
| * there are. OUIs starting with 0xff are |
| * broadcast addresses, and would never be |
| * permantely stored. |
| */ |
| memset((void *) vpdInfo, 0, sizeof(VPD)); |
| memset((void *) &vpdInfo->ethAddrs, 0xff, sizeof(vpdInfo->ethAddrs)); |
| vpdInfo->_devAddr = dev_addr; |
| |
| /* Read the minimum size first */ |
| if (vpd_reader(buf, dev_addr, 0, VPD_EEPROM_SIZE) == NULL) |
| return 1; |
| |
| /* Check validity of VPD data */ |
| if (!vpd_is_valid(dev_addr, buf)) { |
| printf("VPD Data is INVALID!\n"); |
| return 1; |
| } |
| |
| /* |
| * Walk all the packets and populate |
| * the VPD info structure. |
| */ |
| packet = (vpd_packet_t *) &vpd->packets; |
| do { |
| switch (packet->identifier) { |
| case VPD_PID_GI: |
| printf("Error: Illegal VPD value\n"); |
| break; |
| case VPD_PID_PID: |
| if (strlen_ok(packet, MAX_PROD_ID)) { |
| strncpy(vpdInfo->productId, |
| (char *) (packet->data), |
| packet->size); |
| } |
| break; |
| case VPD_PID_REV: |
| if (size_ok(packet, sizeof(char))) |
| vpdInfo->revisionId = *packet->data; |
| break; |
| case VPD_PID_SN: |
| if (size_ok(packet, sizeof(unsigned long))) { |
| vpdInfo->serialNum = |
| *(unsigned long *) packet->data; |
| } |
| break; |
| case VPD_PID_MANID: |
| if (size_ok(packet, sizeof(unsigned char))) |
| vpdInfo->manuID = *packet->data; |
| break; |
| case VPD_PID_PCO: |
| if (size_ok(packet, sizeof(unsigned long))) { |
| vpdInfo->configOpt = |
| *(unsigned long *) packet->data; |
| } |
| break; |
| case VPD_PID_SYSCLK: |
| if (size_ok(packet, sizeof(unsigned long))) |
| vpdInfo->sysClk = |
| *(unsigned long *) packet->data; |
| break; |
| case VPD_PID_SERCLK: |
| if (size_ok(packet, sizeof(unsigned long))) |
| vpdInfo->serClk = |
| *(unsigned long *) packet->data; |
| break; |
| case VPD_PID_FLASH: |
| if (size_ok(packet, 9)) { /* XXX - hardcoded, |
| padding in struct */ |
| memcpy(&vpdInfo->flashCfg, packet->data, 9); |
| } |
| break; |
| case VPD_PID_ETHADDR: |
| memcpy(vpdInfo->ethAddrs, packet->data, packet->size); |
| break; |
| case VPD_PID_POTS: |
| if (size_ok(packet, sizeof(char))) |
| vpdInfo->numPOTS = (unsigned) *packet->data; |
| break; |
| case VPD_PID_DS1: |
| if (size_ok(packet, sizeof(char))) |
| vpdInfo->numDS1 = (unsigned) *packet->data; |
| case VPD_PID_GAL: |
| case VPD_PID_CRC: |
| case VPD_PID_TERM: |
| break; |
| default: |
| printf("Warning: Found unknown VPD packet ID 0x%x\n", |
| packet->identifier); |
| break; |
| } |
| } while ((packet = vpd_get_packet(packet))); |
| |
| return 0; |
| } |
| |
| |
| /* |
| * vpd_init() - Initialize default VPD environment |
| */ |
| int vpd_init(unsigned char dev_addr) |
| { |
| return 0; |
| } |
| |
| |
| /* |
| * vpd_print() - Pretty print the VPD data. |
| */ |
| void vpd_print(VPD *vpdInfo) |
| { |
| const char *const sp = ""; |
| const char *const sfmt = "%4s%-20s: \"%s\"\n"; |
| const char *const cfmt = "%4s%-20s: '%c'\n"; |
| const char *const dfmt = "%4s%-20s: %ld\n"; |
| const char *const hfmt = "%4s%-20s: %08lX\n"; |
| const char *const dsfmt = "%4s%-20s: %d\n"; |
| const char *const hsfmt = "%4s%-20s: %04X\n"; |
| const char *const dhfmt = "%4s%-20s: %ld (%lX)\n"; |
| |
| printf("VPD read from I2C device: %02X\n", vpdInfo->_devAddr); |
| |
| if (vpdInfo->productId[0]) |
| printf(sfmt, sp, "Product ID", vpdInfo->productId); |
| else |
| printf(sfmt, sp, "Product ID", "UNKNOWN"); |
| |
| if (vpdInfo->revisionId) |
| printf(cfmt, sp, "Revision ID", vpdInfo->revisionId); |
| |
| if (vpdInfo->serialNum) |
| printf(dfmt, sp, "Serial Number", vpdInfo->serialNum); |
| |
| if (vpdInfo->manuID) |
| printf(dfmt, sp, "Manufacture ID", (long) vpdInfo->manuID); |
| |
| if (vpdInfo->configOpt) |
| printf(hfmt, sp, "Configuration", vpdInfo->configOpt); |
| |
| if (vpdInfo->sysClk) |
| printf(dhfmt, sp, "System Clock", vpdInfo->sysClk, |
| vpdInfo->sysClk); |
| |
| if (vpdInfo->serClk) |
| printf(dhfmt, sp, "Serial Clock", vpdInfo->serClk, |
| vpdInfo->serClk); |
| |
| if (vpdInfo->numPOTS) |
| printf(dfmt, sp, "Number of POTS lines", vpdInfo->numPOTS); |
| |
| if (vpdInfo->numDS1) |
| printf(dfmt, sp, "Number of DS1s", vpdInfo->numDS1); |
| |
| /* Print Ethernet Addresses */ |
| if (vpdInfo->ethAddrs[0][0] != 0xff) { |
| int i, j; |
| |
| printf("%4sEtherNet Address(es): ", sp); |
| for (i = 0; i < MAX_ETH_ADDRS; i++) { |
| if (vpdInfo->ethAddrs[i][0] != 0xff) { |
| for (j = 0; j < 6; j++) { |
| printf("%02X", |
| vpdInfo->ethAddrs[i][j]); |
| if (((j + 1) % 6) != 0) |
| printf(":"); |
| else |
| printf(" "); |
| } |
| if (((i + 1) % 3) == 0) |
| printf("\n%24s: ", sp); |
| } |
| } |
| printf("\n"); |
| } |
| |
| if (vpdInfo->flashCfg.mfg && vpdInfo->flashCfg.dev) { |
| printf("Main Flash Configuration:\n"); |
| printf(hsfmt, sp, "Manufacture ID", vpdInfo->flashCfg.mfg); |
| printf(hsfmt, sp, "Device ID", vpdInfo->flashCfg.dev); |
| printf(dsfmt, sp, "Device Width", vpdInfo->flashCfg.devWidth); |
| printf(dsfmt, sp, "Num. Devices", vpdInfo->flashCfg.numDevs); |
| printf(dsfmt, sp, "Num. Columns", vpdInfo->flashCfg.numCols); |
| printf(dsfmt, sp, "Column Width", vpdInfo->flashCfg.colWidth); |
| printf(dsfmt, sp, "WE Data Width", |
| vpdInfo->flashCfg.weDataWidth); |
| } |
| } |