| /* |
| * (C) Copyright 2002 |
| * John W. Linville, linville@tuxdriver.com |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include "i8259.h" |
| |
| #undef IRQ_DEBUG |
| |
| #ifdef IRQ_DEBUG |
| #define PRINTF(fmt,args...) printf (fmt ,##args) |
| #else |
| #define PRINTF(fmt,args...) |
| #endif |
| |
| static inline unsigned char read_byte(volatile unsigned char* from) |
| { |
| int x; |
| asm volatile ("lbz %0,%1\n eieio" : "=r" (x) : "m" (*from)); |
| return (unsigned char)x; |
| } |
| |
| static inline void write_byte(volatile unsigned char *to, int x) |
| { |
| asm volatile ("stb %1,%0\n eieio" : "=m" (*to) : "r" (x)); |
| } |
| |
| static inline unsigned long read_long_little(volatile unsigned long *from) |
| { |
| unsigned long x; |
| asm volatile ("lwbrx %0,0,%1\n eieio\n sync" : "=r" (x) : "r" (from), "m"(*from)); |
| return (unsigned long)x; |
| } |
| |
| #ifdef out8 |
| #undef out8 |
| #endif |
| |
| #ifdef in8 |
| #undef in8 |
| #endif |
| |
| #define out8(addr, byte) write_byte(0xFE000000 | addr, byte) |
| #define in8(addr) read_byte(0xFE000000 | addr) |
| |
| /* |
| * This contains the irq mask for both 8259A irq controllers, |
| */ |
| static char cached_imr[2] = {0xff, 0xff}; |
| |
| #define cached_imr1 (cached_imr[0]) |
| #define cached_imr2 (cached_imr[1]) |
| |
| void i8259_init(void) |
| { |
| char dummy; |
| PRINTF("Initializing Interrupt controller\n"); |
| /* init master interrupt controller */ |
| out8(0x20, 0x11); /* 0x19); /###* Start init sequence */ |
| out8(0x21, 0x00); /* Vector base */ |
| out8(0x21, 0x04); /* edge tiggered, Cascade (slave) on IRQ2 */ |
| out8(0x21, 0x11); /* was: 0x01); /###* Select 8086 mode */ |
| |
| /* init slave interrupt controller */ |
| out8(0xA0, 0x11); /* 0x19); /###* Start init sequence */ |
| out8(0xA1, 0x08); /* Vector base */ |
| out8(0xA1, 0x02); /* edge triggered, Cascade (slave) on IRQ2 */ |
| out8(0xA1, 0x11); /* was: 0x01); /###* Select 8086 mode */ |
| |
| /* always read ISR */ |
| out8(0x20, 0x0B); |
| dummy = in8(ISR_1); |
| out8(0xA0, 0x0B); |
| dummy = in8(ISR_2); |
| |
| /* out8(0x43, 0x30); */ |
| /* out8(0x40, 0); */ |
| /* out8(0x40, 0); */ |
| /* out8(0x43, 0x70); */ |
| /* out8(0x41, 0); */ |
| /* out8(0x41, 0); */ |
| /* out8(0x43, 0xb0); */ |
| /* out8(0x42, 0); */ |
| /* out8(0x42, 0); */ |
| |
| /* Mask all interrupts */ |
| out8(IMR_2, cached_imr2); |
| out8(IMR_1, cached_imr1); |
| |
| i8259_unmask_irq(2); |
| #if 0 |
| { |
| int i; |
| for (i=0; i<16; i++) |
| { |
| i8259_unmask_irq(i); |
| } |
| } |
| #endif |
| } |
| |
| static volatile char *pci_intack = (void *)0xFEF00000; |
| |
| int i8259_irq(void) |
| { |
| int irq; |
| |
| irq = read_long_little(pci_intack) & 0xff; |
| if (irq==7) { |
| /* |
| * This may be a spurious interrupt. |
| * |
| * Read the interrupt status register (ISR). If the most |
| * significant bit is not set then there is no valid |
| * interrupt. |
| */ |
| if(~in8(0x20)&0x80) { |
| irq = -1; |
| } |
| } |
| |
| return irq; |
| } |
| int i8259_get_irq(struct pt_regs *regs) |
| { |
| unsigned char irq; |
| |
| /* |
| * Perform an interrupt acknowledge cycle on controller 1 |
| */ |
| out8(OCW3_1, 0x0C); /* prepare for poll */ |
| irq = in8(IPL_1) & 7; |
| if (irq == 2) { |
| /* |
| * Interrupt is cascaded so perform interrupt |
| * acknowledge on controller 2 |
| */ |
| out8(OCW3_2, 0x0C); /* prepare for poll */ |
| irq = (in8(IPL_2) & 7) + 8; |
| if (irq == 15) { |
| /* |
| * This may be a spurious interrupt |
| * |
| * Read the interrupt status register. If the most |
| * significant bit is not set then there is no valid |
| * interrupt |
| */ |
| out8(OCW3_2, 0x0b); |
| if (~(in8(ISR_2) & 0x80)) { |
| return -1; |
| } |
| } |
| } else if (irq == 7) { |
| /* |
| * This may be a spurious interrupt |
| * |
| * Read the interrupt status register. If the most |
| * significant bit is not set then there is no valid |
| * interrupt |
| */ |
| out8(OCW3_1, 0x0b); |
| if (~(in8(ISR_1) & 0x80)) { |
| return -1; |
| } |
| } |
| return irq; |
| } |
| |
| /* |
| * Careful! The 8259A is a fragile beast, it pretty |
| * much _has_ to be done exactly like this (mask it |
| * first, _then_ send the EOI, and the order of EOI |
| * to the two 8259s is important! |
| */ |
| void i8259_mask_and_ack(int irq) |
| { |
| if (irq > 7) { |
| cached_imr2 |= (1 << (irq - 8)); |
| in8(IMR_2); /* DUMMY */ |
| out8(IMR_2, cached_imr2); |
| out8(OCW2_2, 0x20); /* Non-specific EOI */ |
| out8(OCW2_1, 0x20); /* Non-specific EOI to cascade */ |
| } else { |
| cached_imr1 |= (1 << irq); |
| in8(IMR_1); /* DUMMY */ |
| out8(IMR_1, cached_imr1); |
| out8(OCW2_1, 0x20); /* Non-specific EOI */ |
| } |
| } |
| |
| void i8259_mask_irq(int irq) |
| { |
| if (irq & 8) { |
| cached_imr2 |= (1 << (irq & 7)); |
| out8(IMR_2, cached_imr2); |
| } else { |
| cached_imr1 |= (1 << irq); |
| out8(IMR_1, cached_imr1); |
| } |
| } |
| |
| void i8259_unmask_irq(int irq) |
| { |
| if (irq & 8) { |
| cached_imr2 &= ~(1 << (irq & 7)); |
| out8(IMR_2, cached_imr2); |
| } else { |
| cached_imr1 &= ~(1 << irq); |
| out8(IMR_1, cached_imr1); |
| } |
| } |