| /* |
| * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC |
| * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC |
| * |
| * Copyright (C) 2013 Atmel, |
| * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> |
| * |
| * Licensed under GPLv2 or later. |
| */ |
| |
| #include "skeleton.dtsi" |
| #include <dt-bindings/dma/at91.h> |
| #include <dt-bindings/pinctrl/at91.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/clock/at91.h> |
| |
| / { |
| model = "Atmel SAMA5D3 family SoC"; |
| compatible = "atmel,sama5d3", "atmel,sama5"; |
| interrupt-parent = <&aic>; |
| |
| aliases { |
| serial0 = &dbgu; |
| serial1 = &usart0; |
| serial2 = &usart1; |
| serial3 = &usart2; |
| serial4 = &usart3; |
| serial5 = &uart0; |
| gpio0 = &pioA; |
| gpio1 = &pioB; |
| gpio2 = &pioC; |
| gpio3 = &pioD; |
| gpio4 = &pioE; |
| tcb0 = &tcb0; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| ssc0 = &ssc0; |
| ssc1 = &ssc1; |
| pwm0 = &pwm0; |
| }; |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a5"; |
| reg = <0x0>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a5-pmu"; |
| interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>; |
| }; |
| |
| memory { |
| reg = <0x20000000 0x8000000>; |
| }; |
| |
| clocks { |
| slow_xtal: slow_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| |
| main_xtal: main_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| |
| adc_op_clk: adc_op_clk{ |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <1000000>; |
| }; |
| }; |
| |
| sram: sram@00300000 { |
| compatible = "mmio-sram"; |
| reg = <0x00300000 0x20000>; |
| }; |
| |
| ahb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| u-boot,dm-pre-reloc; |
| |
| apb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| u-boot,dm-pre-reloc; |
| |
| mmc0: mmc@f0000000 { |
| compatible = "atmel,hsmci"; |
| reg = <0xf0000000 0x600>; |
| interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>; |
| dma-names = "rxtx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&mci0_clk>; |
| clock-names = "mci_clk"; |
| }; |
| |
| spi0: spi@f0004000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0xf0004000 0x100>; |
| interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; |
| dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>, |
| <&dma0 2 AT91_DMA_CFG_PER_ID(2)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spi0>; |
| clocks = <&spi0_clk>; |
| clock-names = "spi_clk"; |
| status = "disabled"; |
| }; |
| |
| ssc0: ssc@f0008000 { |
| compatible = "atmel,at91sam9g45-ssc"; |
| reg = <0xf0008000 0x4000>; |
| interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; |
| dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>, |
| <&dma0 2 AT91_DMA_CFG_PER_ID(14)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; |
| clocks = <&ssc0_clk>; |
| clock-names = "pclk"; |
| status = "disabled"; |
| }; |
| |
| tcb0: timer@f0010000 { |
| compatible = "atmel,at91sam9x5-tcb"; |
| reg = <0xf0010000 0x100>; |
| interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&tcb0_clk>, <&clk32k>; |
| clock-names = "t0_clk", "slow_clk"; |
| }; |
| |
| i2c0: i2c@f0014000 { |
| compatible = "atmel,at91sam9x5-i2c"; |
| reg = <0xf0014000 0x4000>; |
| interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>; |
| dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>, |
| <&dma0 2 AT91_DMA_CFG_PER_ID(8)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&twi0_clk>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@f0018000 { |
| compatible = "atmel,at91sam9x5-i2c"; |
| reg = <0xf0018000 0x4000>; |
| interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>; |
| dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>, |
| <&dma0 2 AT91_DMA_CFG_PER_ID(10)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&twi1_clk>; |
| status = "disabled"; |
| }; |
| |
| usart0: serial@f001c000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf001c000 0x100>; |
| interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; |
| dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, |
| <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usart0>; |
| clocks = <&usart0_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| usart1: serial@f0020000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf0020000 0x100>; |
| interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; |
| dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>, |
| <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usart1>; |
| clocks = <&usart1_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@f0024000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf0024000 0x100>; |
| interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart0>; |
| clocks = <&uart0_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@f002c000 { |
| compatible = "atmel,sama5d3-pwm"; |
| reg = <0xf002c000 0x300>; |
| interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>; |
| #pwm-cells = <3>; |
| clocks = <&pwm_clk>; |
| status = "disabled"; |
| }; |
| |
| isi: isi@f0034000 { |
| compatible = "atmel,at91sam9g45-isi"; |
| reg = <0xf0034000 0x4000>; |
| interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_isi_data_0_7>; |
| clocks = <&isi_clk>; |
| clock-names = "isi_clk"; |
| status = "disabled"; |
| }; |
| |
| sfr: sfr@f0038000 { |
| compatible = "atmel,sama5d3-sfr", "syscon"; |
| reg = <0xf0038000 0x60>; |
| }; |
| |
| mmc1: mmc@f8000000 { |
| compatible = "atmel,hsmci"; |
| reg = <0xf8000000 0x600>; |
| interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>; |
| dma-names = "rxtx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&mci1_clk>; |
| clock-names = "mci_clk"; |
| }; |
| |
| spi1: spi@f8008000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0xf8008000 0x100>; |
| interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; |
| dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>, |
| <&dma1 2 AT91_DMA_CFG_PER_ID(16)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spi1>; |
| clocks = <&spi1_clk>; |
| clock-names = "spi_clk"; |
| status = "disabled"; |
| }; |
| |
| ssc1: ssc@f800c000 { |
| compatible = "atmel,at91sam9g45-ssc"; |
| reg = <0xf800c000 0x4000>; |
| interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; |
| dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>, |
| <&dma1 2 AT91_DMA_CFG_PER_ID(4)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; |
| clocks = <&ssc1_clk>; |
| clock-names = "pclk"; |
| status = "disabled"; |
| }; |
| |
| adc0: adc@f8018000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "atmel,at91sam9x5-adc"; |
| reg = <0xf8018000 0x100>; |
| interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; |
| pinctrl-names = "default"; |
| pinctrl-0 = < |
| &pinctrl_adc0_adtrg |
| &pinctrl_adc0_ad0 |
| &pinctrl_adc0_ad1 |
| &pinctrl_adc0_ad2 |
| &pinctrl_adc0_ad3 |
| &pinctrl_adc0_ad4 |
| &pinctrl_adc0_ad5 |
| &pinctrl_adc0_ad6 |
| &pinctrl_adc0_ad7 |
| &pinctrl_adc0_ad8 |
| &pinctrl_adc0_ad9 |
| &pinctrl_adc0_ad10 |
| &pinctrl_adc0_ad11 |
| >; |
| clocks = <&adc_clk>, |
| <&adc_op_clk>; |
| clock-names = "adc_clk", "adc_op_clk"; |
| atmel,adc-channels-used = <0xfff>; |
| atmel,adc-startup-time = <40>; |
| atmel,adc-use-external-triggers; |
| atmel,adc-vref = <3000>; |
| atmel,adc-res = <10 12>; |
| atmel,adc-sample-hold-time = <11>; |
| atmel,adc-res-names = "lowres", "highres"; |
| status = "disabled"; |
| |
| trigger@0 { |
| reg = <0>; |
| trigger-name = "external-rising"; |
| trigger-value = <0x1>; |
| trigger-external; |
| }; |
| trigger@1 { |
| reg = <1>; |
| trigger-name = "external-falling"; |
| trigger-value = <0x2>; |
| trigger-external; |
| }; |
| trigger@2 { |
| reg = <2>; |
| trigger-name = "external-any"; |
| trigger-value = <0x3>; |
| trigger-external; |
| }; |
| trigger@3 { |
| reg = <3>; |
| trigger-name = "continuous"; |
| trigger-value = <0x6>; |
| }; |
| }; |
| |
| i2c2: i2c@f801c000 { |
| compatible = "atmel,at91sam9x5-i2c"; |
| reg = <0xf801c000 0x4000>; |
| interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>; |
| dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, |
| <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&twi2_clk>; |
| status = "disabled"; |
| }; |
| |
| usart2: serial@f8020000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf8020000 0x100>; |
| interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; |
| dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>, |
| <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usart2>; |
| clocks = <&usart2_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| usart3: serial@f8024000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf8024000 0x100>; |
| interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; |
| dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>, |
| <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usart3>; |
| clocks = <&usart3_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| sha@f8034000 { |
| compatible = "atmel,at91sam9g46-sha"; |
| reg = <0xf8034000 0x100>; |
| interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; |
| dma-names = "tx"; |
| clocks = <&sha_clk>; |
| clock-names = "sha_clk"; |
| }; |
| |
| aes@f8038000 { |
| compatible = "atmel,at91sam9g46-aes"; |
| reg = <0xf8038000 0x100>; |
| interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, |
| <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; |
| dma-names = "tx", "rx"; |
| clocks = <&aes_clk>; |
| clock-names = "aes_clk"; |
| }; |
| |
| tdes@f803c000 { |
| compatible = "atmel,at91sam9g46-tdes"; |
| reg = <0xf803c000 0x100>; |
| interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, |
| <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; |
| dma-names = "tx", "rx"; |
| clocks = <&tdes_clk>; |
| clock-names = "tdes_clk"; |
| }; |
| |
| trng@f8040000 { |
| compatible = "atmel,at91sam9g45-trng"; |
| reg = <0xf8040000 0x100>; |
| interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&trng_clk>; |
| }; |
| |
| dma0: dma-controller@ffffe600 { |
| compatible = "atmel,at91sam9g45-dma"; |
| reg = <0xffffe600 0x200>; |
| interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; |
| #dma-cells = <2>; |
| clocks = <&dma0_clk>; |
| clock-names = "dma_clk"; |
| }; |
| |
| dma1: dma-controller@ffffe800 { |
| compatible = "atmel,at91sam9g45-dma"; |
| reg = <0xffffe800 0x200>; |
| interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; |
| #dma-cells = <2>; |
| clocks = <&dma1_clk>; |
| clock-names = "dma_clk"; |
| }; |
| |
| ramc0: ramc@ffffea00 { |
| compatible = "atmel,sama5d3-ddramc"; |
| reg = <0xffffea00 0x200>; |
| clocks = <&ddrck>, <&mpddr_clk>; |
| clock-names = "ddrck", "mpddr"; |
| }; |
| |
| dbgu: serial@ffffee00 { |
| compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; |
| reg = <0xffffee00 0x200>; |
| interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, |
| <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_dbgu>; |
| clocks = <&dbgu_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| aic: interrupt-controller@fffff000 { |
| #interrupt-cells = <3>; |
| compatible = "atmel,sama5d3-aic"; |
| interrupt-controller; |
| reg = <0xfffff000 0x200>; |
| atmel,external-irqs = <47>; |
| }; |
| |
| pinctrl@fffff200 { |
| u-boot,dm-pre-reloc; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; |
| ranges = <0xfffff200 0xfffff200 0xa00>; |
| atmel,mux-mask = < |
| /* A B C */ |
| 0xffffffff 0xc0fc0000 0xc0ff0000 /* pioA */ |
| 0xffffffff 0x0ff8ffff 0x00000000 /* pioB */ |
| 0xffffffff 0xbc00f1ff 0x7c00fc00 /* pioC */ |
| 0xffffffff 0xc001c0e0 0x0001c1e0 /* pioD */ |
| 0xffffffff 0xbf9f8000 0x18000000 /* pioE */ |
| >; |
| reg = <0xfffff200 0x100 /* pioA */ |
| 0xfffff400 0x100 /* pioB */ |
| 0xfffff600 0x100 /* pioC */ |
| 0xfffff800 0x100 /* pioD */ |
| 0xfffffa00 0x100 /* pioE */ |
| >; |
| |
| /* shared pinctrl settings */ |
| adc0 { |
| pinctrl_adc0_adtrg: adc0_adtrg { |
| atmel,pins = |
| <AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD19 periph A ADTRG */ |
| }; |
| pinctrl_adc0_ad0: adc0_ad0 { |
| atmel,pins = |
| <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD20 periph A AD0 */ |
| }; |
| pinctrl_adc0_ad1: adc0_ad1 { |
| atmel,pins = |
| <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A AD1 */ |
| }; |
| pinctrl_adc0_ad2: adc0_ad2 { |
| atmel,pins = |
| <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD22 periph A AD2 */ |
| }; |
| pinctrl_adc0_ad3: adc0_ad3 { |
| atmel,pins = |
| <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD23 periph A AD3 */ |
| }; |
| pinctrl_adc0_ad4: adc0_ad4 { |
| atmel,pins = |
| <AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD24 periph A AD4 */ |
| }; |
| pinctrl_adc0_ad5: adc0_ad5 { |
| atmel,pins = |
| <AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD25 periph A AD5 */ |
| }; |
| pinctrl_adc0_ad6: adc0_ad6 { |
| atmel,pins = |
| <AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD26 periph A AD6 */ |
| }; |
| pinctrl_adc0_ad7: adc0_ad7 { |
| atmel,pins = |
| <AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD27 periph A AD7 */ |
| }; |
| pinctrl_adc0_ad8: adc0_ad8 { |
| atmel,pins = |
| <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD28 periph A AD8 */ |
| }; |
| pinctrl_adc0_ad9: adc0_ad9 { |
| atmel,pins = |
| <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD29 periph A AD9 */ |
| }; |
| pinctrl_adc0_ad10: adc0_ad10 { |
| atmel,pins = |
| <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */ |
| }; |
| pinctrl_adc0_ad11: adc0_ad11 { |
| atmel,pins = |
| <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */ |
| }; |
| }; |
| |
| dbgu { |
| u-boot,dm-pre-reloc; |
| pinctrl_dbgu: dbgu-0 { |
| u-boot,dm-pre-reloc; |
| atmel,pins = |
| <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A */ |
| AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB31 periph A with pullup */ |
| }; |
| }; |
| |
| i2c0 { |
| pinctrl_i2c0: i2c0-0 { |
| atmel,pins = |
| <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ |
| AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ |
| }; |
| }; |
| |
| i2c1 { |
| pinctrl_i2c1: i2c1-0 { |
| atmel,pins = |
| <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ |
| AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ |
| }; |
| }; |
| |
| i2c2 { |
| pinctrl_i2c2: i2c2-0 { |
| atmel,pins = |
| <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */ |
| AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ |
| }; |
| }; |
| |
| isi { |
| pinctrl_isi_data_0_7: isi-0-data-0-7 { |
| atmel,pins = |
| <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ |
| AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ |
| AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ |
| AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ |
| AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ |
| AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ |
| AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ |
| AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ |
| AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ |
| AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ |
| AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ |
| }; |
| |
| pinctrl_isi_data_8_9: isi-0-data-8-9 { |
| atmel,pins = |
| <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ |
| AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ |
| }; |
| |
| pinctrl_isi_data_10_11: isi-0-data-10-11 { |
| atmel,pins = |
| <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */ |
| AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */ |
| }; |
| }; |
| |
| mmc0 { |
| u-boot,dm-pre-reloc; |
| pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { |
| u-boot,dm-pre-reloc; |
| atmel,pins = |
| <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A MCI0_CK */ |
| AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A MCI0_CDA with pullup */ |
| AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD1 periph A MCI0_DA0 with pullup */ |
| }; |
| pinctrl_mmc0_dat1_3: mmc0_dat1_3 { |
| u-boot,dm-pre-reloc; |
| atmel,pins = |
| <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A MCI0_DA1 with pullup */ |
| AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A MCI0_DA2 with pullup */ |
| AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD4 periph A MCI0_DA3 with pullup */ |
| }; |
| pinctrl_mmc0_dat4_7: mmc0_dat4_7 { |
| u-boot,dm-pre-reloc; |
| atmel,pins = |
| <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ |
| AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ |
| AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ |
| AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ |
| }; |
| }; |
| |
| mmc1 { |
| u-boot,dm-pre-reloc; |
| pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { |
| u-boot,dm-pre-reloc; |
| atmel,pins = |
| <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A MCI1_CK, conflicts with GRX5 */ |
| AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ |
| AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ |
| }; |
| pinctrl_mmc1_dat1_3: mmc1_dat1_3 { |
| u-boot,dm-pre-reloc; |
| atmel,pins = |
| <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ |
| AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ |
| AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ |
| }; |
| }; |
| |
| nand0 { |
| pinctrl_nand0_ale_cle: nand0_ale_cle-0 { |
| atmel,pins = |
| <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PE21 periph A with pullup */ |
| AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PE22 periph A with pullup */ |
| }; |
| }; |
| |
| pwm0 { |
| pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 { |
| atmel,pins = |
| <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D4 and LCDDAT20 */ |
| }; |
| pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 { |
| atmel,pins = |
| <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX0 */ |
| }; |
| pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 { |
| atmel,pins = |
| <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D5 and LCDDAT21 */ |
| }; |
| pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 { |
| atmel,pins = |
| <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX1 */ |
| }; |
| |
| pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 { |
| atmel,pins = |
| <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D6 and LCDDAT22 */ |
| }; |
| pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 { |
| atmel,pins = |
| <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX0 */ |
| }; |
| pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 { |
| atmel,pins = |
| <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with G125CKO and RTS1 */ |
| }; |
| pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 { |
| atmel,pins = |
| <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D7 and LCDDAT23 */ |
| }; |
| pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 { |
| atmel,pins = |
| <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX1 */ |
| }; |
| pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 { |
| atmel,pins = |
| <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with IRQ */ |
| }; |
| |
| pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 { |
| atmel,pins = |
| <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXCK */ |
| }; |
| pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 { |
| atmel,pins = |
| <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA4 and TIOA0 */ |
| }; |
| pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 { |
| atmel,pins = |
| <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXEN */ |
| }; |
| pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 { |
| atmel,pins = |
| <AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA5 and TIOB0 */ |
| }; |
| |
| pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 { |
| atmel,pins = |
| <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXDV */ |
| }; |
| pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 { |
| atmel,pins = |
| <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA6 and TCLK0 */ |
| }; |
| pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 { |
| atmel,pins = |
| <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXER */ |
| }; |
| pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 { |
| atmel,pins = |
| <AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA7 */ |
| }; |
| }; |
| |
| spi0 { |
| u-boot,dm-pre-reloc; |
| pinctrl_spi0: spi0-0 { |
| u-boot,dm-pre-reloc; |
| atmel,pins = |
| <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A SPI0_MISO pin */ |
| AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A SPI0_MOSI pin */ |
| AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A SPI0_SPCK pin */ |
| }; |
| }; |
| |
| spi1 { |
| u-boot,dm-pre-reloc; |
| pinctrl_spi1: spi1-0 { |
| u-boot,dm-pre-reloc; |
| atmel,pins = |
| <AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A SPI1_MISO pin */ |
| AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A SPI1_MOSI pin */ |
| AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC24 periph A SPI1_SPCK pin */ |
| }; |
| }; |
| |
| ssc0 { |
| pinctrl_ssc0_tx: ssc0_tx { |
| atmel,pins = |
| <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A TK0 */ |
| AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC17 periph A TF0 */ |
| AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC18 periph A TD0 */ |
| }; |
| |
| pinctrl_ssc0_rx: ssc0_rx { |
| atmel,pins = |
| <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A RK0 */ |
| AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC20 periph A RF0 */ |
| AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC21 periph A RD0 */ |
| }; |
| }; |
| |
| ssc1 { |
| pinctrl_ssc1_tx: ssc1_tx { |
| atmel,pins = |
| <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB2 periph B TK1, conflicts with GTX2 */ |
| AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B TF1, conflicts with GTX3 */ |
| AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB6 periph B TD1, conflicts with TD1 */ |
| }; |
| |
| pinctrl_ssc1_rx: ssc1_rx { |
| atmel,pins = |
| <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB7 periph B RK1, conflicts with EREFCK */ |
| AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB10 periph B RF1, conflicts with GTXER */ |
| AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB11 periph B RD1, conflicts with GRXCK */ |
| }; |
| }; |
| |
| uart0 { |
| pinctrl_uart0: uart0-0 { |
| atmel,pins = |
| <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* conflicts with PWMFI2, ISI_D8 */ |
| AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with ISI_PCK */ |
| }; |
| }; |
| |
| uart1 { |
| pinctrl_uart1: uart1-0 { |
| atmel,pins = |
| <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* conflicts with TWD0, ISI_VSYNC */ |
| AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* conflicts with TWCK0, ISI_HSYNC */ |
| }; |
| }; |
| |
| usart0 { |
| pinctrl_usart0: usart0-0 { |
| atmel,pins = |
| <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A */ |
| AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD18 periph A with pullup */ |
| }; |
| |
| pinctrl_usart0_rts_cts: usart0_rts_cts-0 { |
| atmel,pins = |
| <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ |
| AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ |
| }; |
| }; |
| |
| usart1 { |
| pinctrl_usart1: usart1-0 { |
| atmel,pins = |
| <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB28 periph A */ |
| AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB29 periph A with pullup */ |
| }; |
| |
| pinctrl_usart1_rts_cts: usart1_rts_cts-0 { |
| atmel,pins = |
| <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB26 periph A, conflicts with GRX7 */ |
| AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A, conflicts with G125CKO */ |
| }; |
| }; |
| |
| usart2 { |
| pinctrl_usart2: usart2-0 { |
| atmel,pins = |
| <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE25 periph B, conflicts with A25 */ |
| AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE26 periph B with pullup, conflicts NCS0 */ |
| }; |
| |
| pinctrl_usart2_rts_cts: usart2_rts_cts-0 { |
| atmel,pins = |
| <AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE23 periph B, conflicts with A23 */ |
| AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE24 periph B, conflicts with A24 */ |
| }; |
| }; |
| |
| usart3 { |
| pinctrl_usart3: usart3-0 { |
| atmel,pins = |
| <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE18 periph B, conflicts with A18 */ |
| AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE19 periph B with pullup, conflicts with A19 */ |
| }; |
| |
| pinctrl_usart3_rts_cts: usart3_rts_cts-0 { |
| atmel,pins = |
| <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE16 periph B, conflicts with A16 */ |
| AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE17 periph B, conflicts with A17 */ |
| }; |
| }; |
| }; |
| |
| pioA: gpio@fffff200 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffff200 0x100>; |
| interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pioA_clk>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| pioB: gpio@fffff400 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffff400 0x100>; |
| interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pioB_clk>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| pioC: gpio@fffff600 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffff600 0x100>; |
| interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pioC_clk>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| pioD: gpio@fffff800 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffff800 0x100>; |
| interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pioD_clk>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| pioE: gpio@fffffa00 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffffa00 0x100>; |
| interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pioE_clk>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| pmc: pmc@fffffc00 { |
| compatible = "atmel,sama5d3-pmc", "syscon"; |
| reg = <0xfffffc00 0x120>; |
| interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| interrupt-controller; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| u-boot,dm-pre-reloc; |
| |
| main_rc_osc: main_rc_osc { |
| compatible = "atmel,at91sam9x5-clk-main-rc-osc"; |
| #clock-cells = <0>; |
| interrupt-parent = <&pmc>; |
| interrupts = <AT91_PMC_MOSCRCS>; |
| clock-frequency = <12000000>; |
| clock-accuracy = <50000000>; |
| }; |
| |
| main_osc: main_osc { |
| compatible = "atmel,at91rm9200-clk-main-osc"; |
| #clock-cells = <0>; |
| interrupt-parent = <&pmc>; |
| interrupts = <AT91_PMC_MOSCS>; |
| clocks = <&main_xtal>; |
| }; |
| |
| main: mainck { |
| compatible = "atmel,at91sam9x5-clk-main"; |
| #clock-cells = <0>; |
| interrupt-parent = <&pmc>; |
| interrupts = <AT91_PMC_MOSCSELS>; |
| clocks = <&main_rc_osc &main_osc>; |
| }; |
| |
| plla: pllack@0 { |
| compatible = "atmel,sama5d3-clk-pll"; |
| #clock-cells = <0>; |
| interrupt-parent = <&pmc>; |
| interrupts = <AT91_PMC_LOCKA>; |
| clocks = <&main>; |
| reg = <0>; |
| atmel,clk-input-range = <8000000 50000000>; |
| #atmel,pll-clk-output-range-cells = <4>; |
| atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>; |
| }; |
| |
| plladiv: plladivck { |
| compatible = "atmel,at91sam9x5-clk-plldiv"; |
| #clock-cells = <0>; |
| clocks = <&plla>; |
| }; |
| |
| utmi: utmick { |
| compatible = "atmel,at91sam9x5-clk-utmi"; |
| #clock-cells = <0>; |
| interrupt-parent = <&pmc>; |
| interrupts = <AT91_PMC_LOCKU>; |
| clocks = <&main>; |
| regmap-sfr = <&sfr>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| mck: masterck { |
| compatible = "atmel,at91sam9x5-clk-master"; |
| #clock-cells = <0>; |
| interrupt-parent = <&pmc>; |
| interrupts = <AT91_PMC_MCKRDY>; |
| clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; |
| atmel,clk-output-range = <0 166000000>; |
| atmel,clk-divisors = <1 2 4 3>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| usb: usbck { |
| compatible = "atmel,at91sam9x5-clk-usb"; |
| #clock-cells = <0>; |
| clocks = <&plladiv>, <&utmi>; |
| }; |
| |
| prog: progck { |
| compatible = "atmel,at91sam9x5-clk-programmable"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <&pmc>; |
| clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; |
| |
| prog0: progck@0 { |
| #clock-cells = <0>; |
| reg = <0>; |
| interrupts = <AT91_PMC_PCKRDY(0)>; |
| }; |
| |
| prog1: progck@1 { |
| #clock-cells = <0>; |
| reg = <1>; |
| interrupts = <AT91_PMC_PCKRDY(1)>; |
| }; |
| |
| prog2: progck@2 { |
| #clock-cells = <0>; |
| reg = <2>; |
| interrupts = <AT91_PMC_PCKRDY(2)>; |
| }; |
| }; |
| |
| smd: smdclk { |
| compatible = "atmel,at91sam9x5-clk-smd"; |
| #clock-cells = <0>; |
| clocks = <&plladiv>, <&utmi>; |
| }; |
| |
| systemck { |
| compatible = "atmel,at91rm9200-clk-system"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ddrck: ddrck@2 { |
| #clock-cells = <0>; |
| reg = <2>; |
| clocks = <&mck>; |
| }; |
| |
| smdck: smdck@4 { |
| #clock-cells = <0>; |
| reg = <4>; |
| clocks = <&smd>; |
| }; |
| |
| uhpck: uhpck@6 { |
| #clock-cells = <0>; |
| reg = <6>; |
| clocks = <&usb>; |
| }; |
| |
| udpck: udpck@7 { |
| #clock-cells = <0>; |
| reg = <7>; |
| clocks = <&usb>; |
| }; |
| |
| pck0: pck@8 { |
| #clock-cells = <0>; |
| reg = <8>; |
| clocks = <&prog0>; |
| }; |
| |
| pck1: pck@9 { |
| #clock-cells = <0>; |
| reg = <9>; |
| clocks = <&prog1>; |
| }; |
| |
| pck2: pck@10 { |
| #clock-cells = <0>; |
| reg = <10>; |
| clocks = <&prog2>; |
| }; |
| }; |
| |
| periphck { |
| compatible = "atmel,at91sam9x5-clk-peripheral"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&mck>; |
| u-boot,dm-pre-reloc; |
| |
| dbgu_clk: dbgu_clk@2 { |
| u-boot,dm-pre-reloc; |
| #clock-cells = <0>; |
| reg = <2>; |
| }; |
| |
| hsmc_clk: hsmc_clk@5 { |
| #clock-cells = <0>; |
| reg = <5>; |
| }; |
| |
| pioA_clk: pioA_clk@6 { |
| u-boot,dm-pre-reloc; |
| #clock-cells = <0>; |
| reg = <6>; |
| }; |
| |
| pioB_clk: pioB_clk@7 { |
| u-boot,dm-pre-reloc; |
| #clock-cells = <0>; |
| reg = <7>; |
| }; |
| |
| pioC_clk: pioC_clk@8 { |
| u-boot,dm-pre-reloc; |
| #clock-cells = <0>; |
| reg = <8>; |
| }; |
| |
| pioD_clk: pioD_clk@9 { |
| u-boot,dm-pre-reloc; |
| #clock-cells = <0>; |
| reg = <9>; |
| }; |
| |
| pioE_clk: pioE_clk@10 { |
| u-boot,dm-pre-reloc; |
| #clock-cells = <0>; |
| reg = <10>; |
| }; |
| |
| usart0_clk: usart0_clk@12 { |
| #clock-cells = <0>; |
| reg = <12>; |
| atmel,clk-output-range = <0 66000000>; |
| }; |
| |
| usart1_clk: usart1_clk@13 { |
| #clock-cells = <0>; |
| reg = <13>; |
| atmel,clk-output-range = <0 66000000>; |
| }; |
| |
| usart2_clk: usart2_clk@14 { |
| #clock-cells = <0>; |
| reg = <14>; |
| atmel,clk-output-range = <0 66000000>; |
| }; |
| |
| usart3_clk: usart3_clk@15 { |
| #clock-cells = <0>; |
| reg = <15>; |
| atmel,clk-output-range = <0 66000000>; |
| }; |
| |
| uart0_clk: uart0_clk@16 { |
| #clock-cells = <0>; |
| reg = <16>; |
| atmel,clk-output-range = <0 66000000>; |
| }; |
| |
| twi0_clk: twi0_clk@18 { |
| reg = <18>; |
| #clock-cells = <0>; |
| atmel,clk-output-range = <0 16625000>; |
| }; |
| |
| twi1_clk: twi1_clk@19 { |
| #clock-cells = <0>; |
| reg = <19>; |
| atmel,clk-output-range = <0 16625000>; |
| }; |
| |
| twi2_clk: twi2_clk@20 { |
| #clock-cells = <0>; |
| reg = <20>; |
| atmel,clk-output-range = <0 16625000>; |
| }; |
| |
| mci0_clk: mci0_clk@21 { |
| u-boot,dm-pre-reloc; |
| #clock-cells = <0>; |
| reg = <21>; |
| }; |
| |
| mci1_clk: mci1_clk@22 { |
| u-boot,dm-pre-reloc; |
| #clock-cells = <0>; |
| reg = <22>; |
| }; |
| |
| spi0_clk: spi0_clk@24 { |
| u-boot,dm-pre-reloc; |
| #clock-cells = <0>; |
| reg = <24>; |
| atmel,clk-output-range = <0 133000000>; |
| }; |
| |
| spi1_clk: spi1_clk@25 { |
| u-boot,dm-pre-reloc; |
| #clock-cells = <0>; |
| reg = <25>; |
| atmel,clk-output-range = <0 133000000>; |
| }; |
| |
| tcb0_clk: tcb0_clk@26 { |
| #clock-cells = <0>; |
| reg = <26>; |
| atmel,clk-output-range = <0 133000000>; |
| }; |
| |
| pwm_clk: pwm_clk@28 { |
| #clock-cells = <0>; |
| reg = <28>; |
| }; |
| |
| adc_clk: adc_clk@29 { |
| #clock-cells = <0>; |
| reg = <29>; |
| atmel,clk-output-range = <0 66000000>; |
| }; |
| |
| dma0_clk: dma0_clk@30 { |
| #clock-cells = <0>; |
| reg = <30>; |
| }; |
| |
| dma1_clk: dma1_clk@31 { |
| #clock-cells = <0>; |
| reg = <31>; |
| }; |
| |
| uhphs_clk: uhphs_clk@32 { |
| #clock-cells = <0>; |
| reg = <32>; |
| }; |
| |
| udphs_clk: udphs_clk@33 { |
| #clock-cells = <0>; |
| reg = <33>; |
| }; |
| |
| isi_clk: isi_clk@37 { |
| #clock-cells = <0>; |
| reg = <37>; |
| }; |
| |
| ssc0_clk: ssc0_clk@38 { |
| #clock-cells = <0>; |
| reg = <38>; |
| atmel,clk-output-range = <0 66000000>; |
| }; |
| |
| ssc1_clk: ssc1_clk@39 { |
| #clock-cells = <0>; |
| reg = <39>; |
| atmel,clk-output-range = <0 66000000>; |
| }; |
| |
| sha_clk: sha_clk@42 { |
| #clock-cells = <0>; |
| reg = <42>; |
| }; |
| |
| aes_clk: aes_clk@43 { |
| #clock-cells = <0>; |
| reg = <43>; |
| }; |
| |
| tdes_clk: tdes_clk@44 { |
| #clock-cells = <0>; |
| reg = <44>; |
| }; |
| |
| trng_clk: trng_clk@45 { |
| #clock-cells = <0>; |
| reg = <45>; |
| }; |
| |
| fuse_clk: fuse_clk@48 { |
| #clock-cells = <0>; |
| reg = <48>; |
| }; |
| |
| mpddr_clk: mpddr_clk@49 { |
| #clock-cells = <0>; |
| reg = <49>; |
| }; |
| }; |
| }; |
| |
| rstc@fffffe00 { |
| compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; |
| reg = <0xfffffe00 0x10>; |
| clocks = <&clk32k>; |
| }; |
| |
| shutdown-controller@fffffe10 { |
| compatible = "atmel,at91sam9x5-shdwc"; |
| reg = <0xfffffe10 0x10>; |
| clocks = <&clk32k>; |
| }; |
| |
| pit: timer@fffffe30 { |
| compatible = "atmel,at91sam9260-pit"; |
| reg = <0xfffffe30 0xf>; |
| interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; |
| clocks = <&mck>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| watchdog@fffffe40 { |
| compatible = "atmel,at91sam9260-wdt"; |
| reg = <0xfffffe40 0x10>; |
| interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&clk32k>; |
| atmel,watchdog-type = "hardware"; |
| atmel,reset-type = "all"; |
| atmel,dbg-halt; |
| status = "disabled"; |
| }; |
| |
| sckc@fffffe50 { |
| compatible = "atmel,at91sam9x5-sckc"; |
| reg = <0xfffffe50 0x4>; |
| |
| slow_rc_osc: slow_rc_osc { |
| compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-accuracy = <50000000>; |
| atmel,startup-time-usec = <75>; |
| }; |
| |
| slow_osc: slow_osc { |
| compatible = "atmel,at91sam9x5-clk-slow-osc"; |
| #clock-cells = <0>; |
| clocks = <&slow_xtal>; |
| atmel,startup-time-usec = <1200000>; |
| }; |
| |
| clk32k: slowck { |
| compatible = "atmel,at91sam9x5-clk-slow"; |
| #clock-cells = <0>; |
| clocks = <&slow_rc_osc &slow_osc>; |
| }; |
| }; |
| |
| rtc@fffffeb0 { |
| compatible = "atmel,at91rm9200-rtc"; |
| reg = <0xfffffeb0 0x30>; |
| interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&clk32k>; |
| }; |
| }; |
| |
| usb0: gadget@00500000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "atmel,sama5d3-udc"; |
| reg = <0x00500000 0x100000 |
| 0xf8030000 0x4000>; |
| interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; |
| clocks = <&udphs_clk>, <&utmi>; |
| clock-names = "pclk", "hclk"; |
| status = "disabled"; |
| |
| ep0: endpoint@0 { |
| reg = <0>; |
| atmel,fifo-size = <64>; |
| atmel,nb-banks = <1>; |
| }; |
| |
| ep1: endpoint@1 { |
| reg = <1>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <3>; |
| atmel,can-dma; |
| atmel,can-isoc; |
| }; |
| |
| ep2: endpoint@2 { |
| reg = <2>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <3>; |
| atmel,can-dma; |
| atmel,can-isoc; |
| }; |
| |
| ep3: endpoint@3 { |
| reg = <3>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| atmel,can-dma; |
| }; |
| |
| ep4: endpoint@4 { |
| reg = <4>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| atmel,can-dma; |
| }; |
| |
| ep5: endpoint@5 { |
| reg = <5>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| atmel,can-dma; |
| }; |
| |
| ep6: endpoint@6 { |
| reg = <6>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| atmel,can-dma; |
| }; |
| |
| ep7i: endpoint@7 { |
| reg = <7>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| atmel,can-dma; |
| }; |
| |
| ep8: endpoint@8 { |
| reg = <8>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| }; |
| |
| ep9: endpoint@9 { |
| reg = <9>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| }; |
| |
| ep10: endpoint@a { |
| reg = <10>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| }; |
| |
| ep11: endpoint@b { |
| reg = <11>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| }; |
| |
| ep12: endpoint@c { |
| reg = <12>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| }; |
| |
| ep13: endpoint@d { |
| reg = <13>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| }; |
| |
| ep14: endpoint@e { |
| reg = <14>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| }; |
| |
| ep15: endpoint@f { |
| reg = <15>; |
| atmel,fifo-size = <1024>; |
| atmel,nb-banks = <2>; |
| }; |
| }; |
| |
| usb1: ohci@00600000 { |
| compatible = "atmel,at91rm9200-ohci", "usb-ohci"; |
| reg = <0x00600000 0x100000>; |
| interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; |
| clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; |
| clock-names = "ohci_clk", "hclk", "uhpck"; |
| status = "disabled"; |
| }; |
| |
| usb2: ehci@00700000 { |
| compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; |
| reg = <0x00700000 0x100000>; |
| interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; |
| clocks = <&utmi>, <&uhphs_clk>; |
| clock-names = "usb_clk", "ehci_clk"; |
| status = "disabled"; |
| }; |
| |
| nand0: nand@60000000 { |
| compatible = "atmel,at91rm9200-nand"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| reg = < 0x60000000 0x01000000 /* EBI CS3 */ |
| 0xffffc070 0x00000490 /* SMC PMECC regs */ |
| 0xffffc500 0x00000100 /* SMC PMECC Error Location regs */ |
| 0x00110000 0x00018000 /* ROM code */ |
| >; |
| interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; |
| atmel,nand-addr-offset = <21>; |
| atmel,nand-cmd-offset = <22>; |
| atmel,nand-has-dma; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_nand0_ale_cle>; |
| atmel,pmecc-lookup-table-offset = <0x0 0x8000>; |
| status = "disabled"; |
| |
| nfc@70000000 { |
| compatible = "atmel,sama5d3-nfc"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = < |
| 0x70000000 0x08000000 /* NFC Command Registers */ |
| 0xffffc000 0x00000070 /* NFC HSMC regs */ |
| 0x00200000 0x00100000 /* NFC SRAM banks */ |
| >; |
| clocks = <&hsmc_clk>; |
| }; |
| }; |
| }; |
| |
| onewire_tm: onewire { |
| compatible = "w1-gpio"; |
| status = "disabled"; |
| }; |
| }; |