| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for the Condor board |
| * |
| * Copyright (C) 2018 Renesas Electronics Corp. |
| * Copyright (C) 2018 Cogent Embedded, Inc. |
| */ |
| |
| /dts-v1/; |
| #include "r8a77980.dtsi" |
| |
| / { |
| model = "Renesas Condor board based on r8a77980"; |
| compatible = "renesas,condor", "renesas,r8a77980"; |
| |
| aliases { |
| serial0 = &scif0; |
| ethernet0 = &gether; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| d1_8v: regulator-2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "D1.8V"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| d3_3v: regulator-0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "D3.3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| hdmi-out { |
| compatible = "hdmi-connector"; |
| type = "a"; |
| |
| port { |
| hdmi_con: endpoint { |
| remote-endpoint = <&adv7511_out>; |
| }; |
| }; |
| }; |
| |
| lvds-decoder { |
| compatible = "thine,thc63lvd1024"; |
| vcc-supply = <&d3_3v>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| thc63lvd1024_in: endpoint { |
| remote-endpoint = <&lvds0_out>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| thc63lvd1024_out: endpoint { |
| remote-endpoint = <&adv7511_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| memory@48000000 { |
| device_type = "memory"; |
| /* first 128MB is reserved for secure area. */ |
| reg = <0 0x48000000 0 0x78000000>; |
| }; |
| |
| vddq_vin01: regulator-1 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDQ_VIN01"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| x1_clk: x1-clock { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <148500000>; |
| }; |
| }; |
| |
| &canfd { |
| pinctrl-0 = <&canfd0_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| channel0 { |
| status = "okay"; |
| }; |
| }; |
| |
| &du { |
| clocks = <&cpg CPG_MOD 724>, |
| <&x1_clk>; |
| clock-names = "du.0", "dclkin.0"; |
| status = "okay"; |
| }; |
| |
| &extal_clk { |
| clock-frequency = <16666666>; |
| }; |
| |
| &extalr_clk { |
| clock-frequency = <32768>; |
| }; |
| |
| &gether { |
| pinctrl-0 = <&gether_pins>; |
| pinctrl-names = "default"; |
| |
| phy-mode = "rgmii-id"; |
| phy-handle = <&phy0>; |
| renesas,no-ether-link; |
| status = "okay"; |
| |
| phy0: ethernet-phy@0 { |
| rxc-skew-ps = <1500>; |
| reg = <0>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <23 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| |
| &i2c0 { |
| pinctrl-0 = <&i2c0_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| io_expander0: gpio@20 { |
| compatible = "onnn,pca9654"; |
| reg = <0x20>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| io_expander1: gpio@21 { |
| compatible = "onnn,pca9654"; |
| reg = <0x21>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| hdmi@39 { |
| compatible = "adi,adv7511w"; |
| reg = <0x39>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <20 IRQ_TYPE_LEVEL_LOW>; |
| avdd-supply = <&d1_8v>; |
| dvdd-supply = <&d1_8v>; |
| pvdd-supply = <&d1_8v>; |
| bgvdd-supply = <&d1_8v>; |
| dvdd-3v-supply = <&d3_3v>; |
| |
| adi,input-depth = <8>; |
| adi,input-colorspace = "rgb"; |
| adi,input-clock = "1x"; |
| adi,input-style = <1>; |
| adi,input-justification = "evenly"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| adv7511_in: endpoint { |
| remote-endpoint = <&thc63lvd1024_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| adv7511_out: endpoint { |
| remote-endpoint = <&hdmi_con>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &lvds0 { |
| status = "okay"; |
| |
| ports { |
| port@1 { |
| lvds0_out: endpoint { |
| remote-endpoint = <&thc63lvd1024_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &mmc0 { |
| pinctrl-0 = <&mmc_pins>; |
| pinctrl-1 = <&mmc_pins_uhs>; |
| pinctrl-names = "default", "state_uhs"; |
| |
| vmmc-supply = <&d3_3v>; |
| vqmmc-supply = <&vddq_vin01>; |
| mmc-hs200-1_8v; |
| bus-width = <8>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &pciec { |
| status = "okay"; |
| }; |
| |
| &pcie_bus_clk { |
| clock-frequency = <100000000>; |
| }; |
| |
| &pcie_phy { |
| status = "okay"; |
| }; |
| |
| &pfc { |
| canfd0_pins: canfd0 { |
| groups = "canfd0_data_a"; |
| function = "canfd0"; |
| }; |
| |
| gether_pins: gether { |
| groups = "gether_mdio_a", "gether_rgmii", |
| "gether_txcrefclk", "gether_txcrefclk_mega"; |
| function = "gether"; |
| }; |
| |
| i2c0_pins: i2c0 { |
| groups = "i2c0"; |
| function = "i2c0"; |
| }; |
| |
| mmc_pins: mmc { |
| groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; |
| function = "mmc"; |
| power-source = <3300>; |
| }; |
| |
| mmc_pins_uhs: mmc_uhs { |
| groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; |
| function = "mmc"; |
| power-source = <1800>; |
| }; |
| |
| scif0_pins: scif0 { |
| groups = "scif0_data"; |
| function = "scif0"; |
| }; |
| |
| scif_clk_pins: scif_clk { |
| groups = "scif_clk_b"; |
| function = "scif_clk"; |
| }; |
| }; |
| |
| &rwdt { |
| timeout-sec = <60>; |
| status = "okay"; |
| }; |
| |
| &scif0 { |
| pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| }; |
| |
| &scif_clk { |
| clock-frequency = <14745600>; |
| }; |