| # SPDX-License-Identifier: GPL-2.0+ |
| |
| VERSION = 2020 |
| PATCHLEVEL = 04 |
| SUBLEVEL = |
| EXTRAVERSION = -rc4 |
| NAME = |
| |
| # *DOCUMENTATION* |
| # To see a list of typical targets execute "make help" |
| # More info can be located in ./README |
| # Comments in this file are targeted only to the developer, do not |
| # expect to learn how to build the kernel reading this file. |
| |
| # o Do not use make's built-in rules and variables |
| # (this increases performance and avoids hard-to-debug behaviour); |
| # o Look for make include files relative to root of kernel src |
| MAKEFLAGS += -rR --include-dir=$(CURDIR) |
| |
| # Determine host architecture |
| include include/host_arch.h |
| MK_ARCH="${shell uname -m}" |
| unexport HOST_ARCH |
| ifeq ("x86_64", $(MK_ARCH)) |
| export HOST_ARCH=$(HOST_ARCH_X86_64) |
| else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686")) |
| export HOST_ARCH=$(HOST_ARCH_X86) |
| else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l")) |
| export HOST_ARCH=$(HOST_ARCH_AARCH64) |
| else ifeq ("armv7l", $(MK_ARCH)) |
| export HOST_ARCH=$(HOST_ARCH_ARM) |
| else ifeq ("riscv32", $(MK_ARCH)) |
| export HOST_ARCH=$(HOST_ARCH_RISCV32) |
| else ifeq ("riscv64", $(MK_ARCH)) |
| export HOST_ARCH=$(HOST_ARCH_RISCV64) |
| endif |
| undefine MK_ARCH |
| |
| # Avoid funny character set dependencies |
| unexport LC_ALL |
| LC_COLLATE=C |
| LC_NUMERIC=C |
| export LC_COLLATE LC_NUMERIC |
| |
| # Avoid interference with shell env settings |
| unexport GREP_OPTIONS |
| |
| # We are using a recursive build, so we need to do a little thinking |
| # to get the ordering right. |
| # |
| # Most importantly: sub-Makefiles should only ever modify files in |
| # their own directory. If in some directory we have a dependency on |
| # a file in another dir (which doesn't happen often, but it's often |
| # unavoidable when linking the built-in.o targets which finally |
| # turn into vmlinux), we will call a sub make in that other dir, and |
| # after that we are sure that everything which is in that other dir |
| # is now up to date. |
| # |
| # The only cases where we need to modify files which have global |
| # effects are thus separated out and done before the recursive |
| # descending is started. They are now explicitly listed as the |
| # prepare rule. |
| |
| # Beautify output |
| # --------------------------------------------------------------------------- |
| # |
| # Normally, we echo the whole command before executing it. By making |
| # that echo $($(quiet)$(cmd)), we now have the possibility to set |
| # $(quiet) to choose other forms of output instead, e.g. |
| # |
| # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ |
| # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< |
| # |
| # If $(quiet) is empty, the whole command will be printed. |
| # If it is set to "quiet_", only the short version will be printed. |
| # If it is set to "silent_", nothing will be printed at all, since |
| # the variable $(silent_cmd_cc_o_c) doesn't exist. |
| # |
| # A simple variant is to prefix commands with $(Q) - that's useful |
| # for commands that shall be hidden in non-verbose mode. |
| # |
| # $(Q)ln $@ :< |
| # |
| # If KBUILD_VERBOSE equals 0 then the above command will be hidden. |
| # If KBUILD_VERBOSE equals 1 then the above command is displayed. |
| # |
| # To put more focus on warnings, be less verbose as default |
| # Use 'make V=1' to see the full commands |
| |
| ifeq ("$(origin V)", "command line") |
| KBUILD_VERBOSE = $(V) |
| endif |
| ifndef KBUILD_VERBOSE |
| KBUILD_VERBOSE = 0 |
| endif |
| |
| ifeq ($(KBUILD_VERBOSE),1) |
| quiet = |
| Q = |
| else |
| quiet=quiet_ |
| Q = @ |
| endif |
| |
| # If the user is running make -s (silent mode), suppress echoing of |
| # commands |
| |
| ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 |
| ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) |
| quiet=silent_ |
| endif |
| else # make-3.8x |
| ifneq ($(filter s% -s%,$(MAKEFLAGS)),) |
| quiet=silent_ |
| endif |
| endif |
| |
| export quiet Q KBUILD_VERBOSE |
| |
| # kbuild supports saving output files in a separate directory. |
| # To locate output files in a separate directory two syntaxes are supported. |
| # In both cases the working directory must be the root of the kernel src. |
| # 1) O= |
| # Use "make O=dir/to/store/output/files/" |
| # |
| # 2) Set KBUILD_OUTPUT |
| # Set the environment variable KBUILD_OUTPUT to point to the directory |
| # where the output files shall be placed. |
| # export KBUILD_OUTPUT=dir/to/store/output/files/ |
| # make |
| # |
| # The O= assignment takes precedence over the KBUILD_OUTPUT environment |
| # variable. |
| |
| # KBUILD_SRC is set on invocation of make in OBJ directory |
| # KBUILD_SRC is not intended to be used by the regular user (for now) |
| ifeq ($(KBUILD_SRC),) |
| |
| # OK, Make called in directory where kernel src resides |
| # Do we want to locate output files in a separate directory? |
| ifeq ("$(origin O)", "command line") |
| KBUILD_OUTPUT := $(O) |
| endif |
| |
| # That's our default target when none is given on the command line |
| PHONY := _all |
| _all: |
| |
| # Cancel implicit rules on top Makefile |
| $(CURDIR)/Makefile Makefile: ; |
| |
| ifneq ($(KBUILD_OUTPUT),) |
| # Invoke a second make in the output directory, passing relevant variables |
| # check that the output directory actually exists |
| saved-output := $(KBUILD_OUTPUT) |
| KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \ |
| && /bin/pwd) |
| $(if $(KBUILD_OUTPUT),, \ |
| $(error failed to create output directory "$(saved-output)")) |
| |
| PHONY += $(MAKECMDGOALS) sub-make |
| |
| $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make |
| @: |
| |
| sub-make: FORCE |
| $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ |
| -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) |
| |
| # Leave processing to above invocation of make |
| skip-makefile := 1 |
| endif # ifneq ($(KBUILD_OUTPUT),) |
| endif # ifeq ($(KBUILD_SRC),) |
| |
| # We process the rest of the Makefile if this is the final invocation of make |
| ifeq ($(skip-makefile),) |
| |
| # Do not print "Entering directory ...", |
| # but we want to display it when entering to the output directory |
| # so that IDEs/editors are able to understand relative filenames. |
| MAKEFLAGS += --no-print-directory |
| |
| # Call a source code checker (by default, "sparse") as part of the |
| # C compilation. |
| # |
| # Use 'make C=1' to enable checking of only re-compiled files. |
| # Use 'make C=2' to enable checking of *all* source files, regardless |
| # of whether they are re-compiled or not. |
| # |
| # See the file "doc/sparse.txt" for more details, including |
| # where to get the "sparse" utility. |
| |
| ifeq ("$(origin C)", "command line") |
| KBUILD_CHECKSRC = $(C) |
| endif |
| ifndef KBUILD_CHECKSRC |
| KBUILD_CHECKSRC = 0 |
| endif |
| |
| # Use make M=dir to specify directory of external module to build |
| # Old syntax make ... SUBDIRS=$PWD is still supported |
| # Setting the environment variable KBUILD_EXTMOD take precedence |
| ifdef SUBDIRS |
| KBUILD_EXTMOD ?= $(SUBDIRS) |
| endif |
| |
| ifeq ("$(origin M)", "command line") |
| KBUILD_EXTMOD := $(M) |
| endif |
| |
| # If building an external module we do not care about the all: rule |
| # but instead _all depend on modules |
| PHONY += all |
| ifeq ($(KBUILD_EXTMOD),) |
| _all: all |
| else |
| _all: modules |
| endif |
| |
| ifeq ($(KBUILD_SRC),) |
| # building in the source tree |
| srctree := . |
| else |
| ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) |
| # building in a subdirectory of the source tree |
| srctree := .. |
| else |
| srctree := $(KBUILD_SRC) |
| endif |
| endif |
| objtree := . |
| src := $(srctree) |
| obj := $(objtree) |
| |
| VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) |
| |
| export srctree objtree VPATH |
| |
| # Make sure CDPATH settings don't interfere |
| unexport CDPATH |
| |
| ######################################################################### |
| |
| HOSTARCH := $(shell uname -m | \ |
| sed -e s/i.86/x86/ \ |
| -e s/sun4u/sparc64/ \ |
| -e s/arm.*/arm/ \ |
| -e s/sa110/arm/ \ |
| -e s/ppc64/powerpc/ \ |
| -e s/ppc/powerpc/ \ |
| -e s/macppc/powerpc/\ |
| -e s/sh.*/sh/) |
| |
| HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ |
| sed -e 's/\(cygwin\).*/cygwin/') |
| |
| export HOSTARCH HOSTOS |
| |
| ######################################################################### |
| |
| # set default to nothing for native builds |
| ifeq ($(HOSTARCH),$(ARCH)) |
| CROSS_COMPILE ?= |
| endif |
| |
| KCONFIG_CONFIG ?= .config |
| export KCONFIG_CONFIG |
| |
| # SHELL used by kbuild |
| CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ |
| else if [ -x /bin/bash ]; then echo /bin/bash; \ |
| else echo sh; fi ; fi) |
| |
| HOSTCC = cc |
| HOSTCXX = c++ |
| HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \ |
| $(if $(CONFIG_TOOLS_DEBUG),-g) |
| HOSTCXXFLAGS = -O2 |
| |
| # With the move to GCC 6, we have implicitly upgraded our language |
| # standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html). |
| # Some Linux distributions (including RHEL7, SLES13, Debian 8) still |
| # have older compilers as their default, so we make it explicit for |
| # these that our host tools are GNU11 (i.e. C11 w/ GNU extensions). |
| CSTD_FLAG := -std=gnu11 |
| ifeq ($(HOSTOS),linux) |
| HOSTCFLAGS += $(CSTD_FLAG) |
| endif |
| |
| ifeq ($(HOSTOS),cygwin) |
| HOSTCFLAGS += -ansi |
| endif |
| |
| # Mac OS X / Darwin's C preprocessor is Apple specific. It |
| # generates numerous errors and warnings. We want to bypass it |
| # and use GNU C's cpp. To do this we pass the -traditional-cpp |
| # option to the compiler. Note that the -traditional-cpp flag |
| # DOES NOT have the same semantics as GNU C's flag, all it does |
| # is invoke the GNU preprocessor in stock ANSI/ISO C fashion. |
| # |
| # Apple's linker is similar, thanks to the new 2 stage linking |
| # multiple symbol definitions are treated as errors, hence the |
| # -multiply_defined suppress option to turn off this error. |
| # |
| ifeq ($(HOSTOS),darwin) |
| # get major and minor product version (e.g. '10' and '6' for Snow Leopard) |
| DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.') |
| DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.') |
| |
| os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \ |
| $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;) |
| |
| os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \ |
| $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;) |
| |
| # Snow Leopards build environment has no longer restrictions as described above |
| HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc") |
| HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp") |
| HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress") |
| |
| # since Lion (10.7) ASLR is on by default, but we use linker generated lists |
| # in some host tools which is a problem then ... so disable ASLR for these |
| # tools |
| HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie") |
| |
| # macOS Mojave (10.14.X) |
| # Undefined symbols for architecture x86_64: "_PyArg_ParseTuple" |
| HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "") |
| endif |
| |
| # Decide whether to build built-in, modular, or both. |
| # Normally, just do built-in. |
| |
| KBUILD_MODULES := |
| KBUILD_BUILTIN := 1 |
| |
| # If we have only "make modules", don't compile built-in objects. |
| # When we're building modules with modversions, we need to consider |
| # the built-in objects during the descend as well, in order to |
| # make sure the checksums are up to date before we record them. |
| |
| ifeq ($(MAKECMDGOALS),modules) |
| KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) |
| endif |
| |
| # If we have "make <whatever> modules", compile modules |
| # in addition to whatever we do anyway. |
| # Just "make" or "make all" shall build modules as well |
| |
| # U-Boot does not need modules |
| #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) |
| # KBUILD_MODULES := 1 |
| #endif |
| |
| #ifeq ($(MAKECMDGOALS),) |
| # KBUILD_MODULES := 1 |
| #endif |
| |
| # Check ths size of a binary: |
| # Args: |
| # $1: File to check |
| # #2: Size limit in bytes (decimal or 0xhex) |
| define size_check |
| actual=$$( wc -c $1 | awk '{print $$1}'); \ |
| limit=$$( printf "%d" $2 ); \ |
| if test $$actual -gt $$limit; then \ |
| echo "$1 exceeds file size limit:" >&2; \ |
| echo " limit: $$(printf %#x $$limit) bytes" >&2; \ |
| echo " actual: $$(printf %#x $$actual) bytes" >&2; \ |
| echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\ |
| exit 1; \ |
| fi |
| endef |
| export size_check |
| |
| export KBUILD_MODULES KBUILD_BUILTIN |
| export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD |
| |
| # We need some generic definitions (do not try to remake the file). |
| scripts/Kbuild.include: ; |
| include scripts/Kbuild.include |
| |
| # Make variables (CC, etc...) |
| |
| AS = $(CROSS_COMPILE)as |
| # Always use GNU ld |
| ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),) |
| LD = $(CROSS_COMPILE)ld.bfd |
| else |
| LD = $(CROSS_COMPILE)ld |
| endif |
| CC = $(CROSS_COMPILE)gcc |
| CPP = $(CC) -E |
| AR = $(CROSS_COMPILE)ar |
| NM = $(CROSS_COMPILE)nm |
| LDR = $(CROSS_COMPILE)ldr |
| STRIP = $(CROSS_COMPILE)strip |
| OBJCOPY = $(CROSS_COMPILE)objcopy |
| OBJDUMP = $(CROSS_COMPILE)objdump |
| LEX = flex |
| YACC = bison |
| AWK = awk |
| PERL = perl |
| PYTHON ?= python |
| PYTHON2 = python2 |
| PYTHON3 = python3 |
| DTC ?= $(objtree)/scripts/dtc/dtc |
| CHECK = sparse |
| |
| CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ |
| -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF) |
| |
| KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__ |
| |
| KBUILD_CFLAGS := -Wall -Wstrict-prototypes \ |
| -Wno-format-security \ |
| -fno-builtin -ffreestanding $(CSTD_FLAG) |
| KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing |
| KBUILD_AFLAGS := -D__ASSEMBLY__ |
| |
| # Don't generate position independent code |
| KBUILD_CFLAGS += $(call cc-option,-fno-PIE) |
| KBUILD_AFLAGS += $(call cc-option,-fno-PIE) |
| |
| # Read UBOOTRELEASE from include/config/uboot.release (if it exists) |
| UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null) |
| UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) |
| |
| export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION |
| export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR |
| export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC |
| export CPP AR NM LDR STRIP OBJCOPY OBJDUMP |
| export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3 |
| export HOSTCXX HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS |
| |
| export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS |
| export KBUILD_CFLAGS KBUILD_AFLAGS |
| |
| export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1) |
| |
| # When compiling out-of-tree modules, put MODVERDIR in the module |
| # tree rather than in the kernel tree. The kernel tree might |
| # even be read-only. |
| export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions |
| |
| # Files to ignore in find ... statements |
| |
| export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ |
| -name CVS -o -name .pc -o -name .hg -o -name .git \) \ |
| -prune -o |
| export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ |
| --exclude CVS --exclude .pc --exclude .hg --exclude .git |
| |
| # =========================================================================== |
| # Rules shared between *config targets and build targets |
| |
| # Basic helpers built in scripts/ |
| PHONY += scripts_basic |
| scripts_basic: |
| $(Q)$(MAKE) $(build)=scripts/basic |
| $(Q)rm -f .tmp_quiet_recordmcount |
| |
| # To avoid any implicit rule to kick in, define an empty command. |
| scripts/basic/%: scripts_basic ; |
| |
| PHONY += outputmakefile |
| # outputmakefile generates a Makefile in the output directory, if using a |
| # separate output directory. This allows convenient use of make in the |
| # output directory. |
| outputmakefile: |
| ifneq ($(KBUILD_SRC),) |
| $(Q)ln -fsn $(srctree) source |
| $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ |
| $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) |
| endif |
| |
| # To make sure we do not include .config for any of the *config targets |
| # catch them early, and hand them over to scripts/kconfig/Makefile |
| # It is allowed to specify more targets when calling make, including |
| # mixing *config targets and build targets. |
| # For example 'make oldconfig all'. |
| # Detect when mixed targets is specified, and make a second invocation |
| # of make so .config is not included in this case either (for *config). |
| |
| version_h := include/generated/version_autogenerated.h |
| timestamp_h := include/generated/timestamp_autogenerated.h |
| defaultenv_h := include/generated/defaultenv_autogenerated.h |
| dt_h := include/generated/dt.h |
| |
| no-dot-config-targets := clean clobber mrproper distclean \ |
| help %docs check% coccicheck \ |
| ubootversion backup tests check qcheck |
| |
| config-targets := 0 |
| mixed-targets := 0 |
| dot-config := 1 |
| |
| ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) |
| ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) |
| dot-config := 0 |
| endif |
| endif |
| |
| ifeq ($(KBUILD_EXTMOD),) |
| ifneq ($(filter config %config,$(MAKECMDGOALS)),) |
| config-targets := 1 |
| ifneq ($(words $(MAKECMDGOALS)),1) |
| mixed-targets := 1 |
| endif |
| endif |
| endif |
| |
| ifeq ($(mixed-targets),1) |
| # =========================================================================== |
| # We're called with mixed targets (*config and build targets). |
| # Handle them one by one. |
| |
| PHONY += $(MAKECMDGOALS) __build_one_by_one |
| |
| $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one |
| @: |
| |
| __build_one_by_one: |
| $(Q)set -e; \ |
| for i in $(MAKECMDGOALS); do \ |
| $(MAKE) -f $(srctree)/Makefile $$i; \ |
| done |
| |
| else |
| ifeq ($(config-targets),1) |
| # =========================================================================== |
| # *config targets only - make sure prerequisites are updated, and descend |
| # in scripts/kconfig to make the *config target |
| |
| KBUILD_DEFCONFIG := sandbox_defconfig |
| export KBUILD_DEFCONFIG KBUILD_KCONFIG |
| |
| config: scripts_basic outputmakefile FORCE |
| $(Q)$(MAKE) $(build)=scripts/kconfig $@ |
| |
| %config: scripts_basic outputmakefile FORCE |
| $(Q)$(MAKE) $(build)=scripts/kconfig $@ |
| |
| else |
| # =========================================================================== |
| # Build targets only - this includes vmlinux, arch specific targets, clean |
| # targets and others. In general all targets except *config targets. |
| |
| # Additional helpers built in scripts/ |
| # Carefully list dependencies so we do not try to build scripts twice |
| # in parallel |
| PHONY += scripts |
| scripts: scripts_basic include/config/auto.conf |
| $(Q)$(MAKE) $(build)=$(@) |
| |
| ifeq ($(dot-config),1) |
| # Read in config |
| -include include/config/auto.conf |
| |
| # Read in dependencies to all Kconfig* files, make sure to run |
| # oldconfig if changes are detected. |
| -include include/config/auto.conf.cmd |
| |
| # To avoid any implicit rule to kick in, define an empty command |
| $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; |
| |
| # If .config is newer than include/config/auto.conf, someone tinkered |
| # with it and forgot to run make oldconfig. |
| # if auto.conf.cmd is missing then we are probably in a cleaned tree so |
| # we execute the config step to be sure to catch updated Kconfig files |
| include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd |
| $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig |
| @# If the following part fails, include/config/auto.conf should be |
| @# deleted so "make silentoldconfig" will be re-run on the next build. |
| $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \ |
| { rm -f include/config/auto.conf; false; } |
| @# include/config.h has been updated after "make silentoldconfig". |
| @# We need to touch include/config/auto.conf so it gets newer |
| @# than include/config.h. |
| @# Otherwise, 'make silentoldconfig' would be invoked twice. |
| $(Q)touch include/config/auto.conf |
| |
| u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg: |
| $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@) |
| |
| -include include/autoconf.mk |
| -include include/autoconf.mk.dep |
| |
| # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf |
| # is up-to-date. When we switch to a different board configuration, old CONFIG |
| # macros are still remaining in include/config/auto.conf. Without the following |
| # gimmick, wrong config.mk would be included leading nasty warnings/errors. |
| ifneq ($(wildcard $(KCONFIG_CONFIG)),) |
| ifneq ($(wildcard include/config/auto.conf),) |
| autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \ |
| include/config/auto.conf) |
| ifeq ($(autoconf_is_old),) |
| include config.mk |
| include arch/$(ARCH)/Makefile |
| endif |
| endif |
| endif |
| |
| # These are set by the arch-specific config.mk. Make sure they are exported |
| # so they can be used when building an EFI application. |
| export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib |
| export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib |
| export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib |
| export CFLAGS_EFI # Compiler flags to add when building EFI app |
| export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app |
| export EFI_TARGET # binutils target if EFI is natively supported |
| |
| # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use |
| # that (or fail if absent). Otherwise, search for a linker script in a |
| # standard location. |
| |
| ifndef LDSCRIPT |
| #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug |
| ifdef CONFIG_SYS_LDSCRIPT |
| # need to strip off double quotes |
| LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%) |
| endif |
| endif |
| |
| # If there is no specified link script, we look in a number of places for it |
| ifndef LDSCRIPT |
| ifeq ($(wildcard $(LDSCRIPT)),) |
| LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds |
| endif |
| ifeq ($(wildcard $(LDSCRIPT)),) |
| LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds |
| endif |
| ifeq ($(wildcard $(LDSCRIPT)),) |
| LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds |
| endif |
| endif |
| |
| else |
| # Dummy target needed, because used as prerequisite |
| include/config/auto.conf: ; |
| endif # $(dot-config) |
| |
| # |
| # Xtensa linker script cannot be preprocessed with -ansi because of |
| # preprocessor operations on strings that don't make C identifiers. |
| # |
| ifeq ($(CONFIG_XTENSA),) |
| LDPPFLAGS += -ansi |
| endif |
| |
| ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE |
| KBUILD_CFLAGS += -Os |
| else |
| KBUILD_CFLAGS += -O2 |
| endif |
| |
| KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) |
| KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks) |
| |
| # change __FILE__ to the relative path from the srctree |
| KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=) |
| |
| KBUILD_CFLAGS += -g |
| # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format> |
| # option to the assembler. |
| KBUILD_AFLAGS += -g |
| |
| # Report stack usage if supported |
| # ARC tools based on GCC 7.1 has an issue with stack usage |
| # with naked functions, see commit message for more details |
| ifndef CONFIG_ARC |
| ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y) |
| KBUILD_CFLAGS += -fstack-usage |
| endif |
| endif |
| |
| KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral) |
| KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) |
| |
| ifeq ($(cc-name),clang) |
| KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,) |
| KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier) |
| KBUILD_CFLAGS += $(call cc-disable-warning, gnu) |
| KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior) |
| endif |
| |
| # turn jbsr into jsr for m68k |
| ifeq ($(ARCH),m68k) |
| ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4) |
| KBUILD_AFLAGS += -Wa,-gstabs,-S |
| endif |
| endif |
| |
| # Prohibit date/time macros, which would make the build non-deterministic |
| KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) |
| |
| include scripts/Makefile.extrawarn |
| |
| # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments |
| KBUILD_CPPFLAGS += $(KCPPFLAGS) |
| KBUILD_AFLAGS += $(KAFLAGS) |
| KBUILD_CFLAGS += $(KCFLAGS) |
| |
| # Use UBOOTINCLUDE when you must reference the include/ directory. |
| # Needed to be compatible with the O= option |
| UBOOTINCLUDE := \ |
| -Iinclude \ |
| $(if $(KBUILD_SRC), -I$(srctree)/include) \ |
| $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \ |
| $(if $(CONFIG_HAS_THUMB2),, \ |
| -I$(srctree)/arch/$(ARCH)/thumb1/include),) \ |
| -I$(srctree)/arch/$(ARCH)/include \ |
| -include $(srctree)/include/linux/kconfig.h |
| |
| NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) |
| |
| # FIX ME |
| cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ |
| $(NOSTDINC_FLAGS) |
| c_flags := $(KBUILD_CFLAGS) $(cpp_flags) |
| |
| ######################################################################### |
| # U-Boot objects....order is important (i.e. start must be first) |
| |
| HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) |
| |
| libs-y += lib/ |
| libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ |
| libs-$(CONFIG_OF_EMBED) += dts/ |
| libs-y += fs/ |
| libs-y += net/ |
| libs-y += disk/ |
| libs-y += drivers/ |
| libs-y += drivers/dma/ |
| libs-y += drivers/gpio/ |
| libs-y += drivers/i2c/ |
| libs-y += drivers/net/ |
| libs-y += drivers/net/phy/ |
| libs-y += drivers/power/ \ |
| drivers/power/domain/ \ |
| drivers/power/fuel_gauge/ \ |
| drivers/power/mfd/ \ |
| drivers/power/pmic/ \ |
| drivers/power/battery/ \ |
| drivers/power/regulator/ |
| libs-y += drivers/spi/ |
| libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/ |
| libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ |
| libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/ |
| libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/ |
| libs-y += drivers/serial/ |
| libs-y += drivers/usb/cdns3/ |
| libs-y += drivers/usb/dwc3/ |
| libs-y += drivers/usb/common/ |
| libs-y += drivers/usb/emul/ |
| libs-y += drivers/usb/eth/ |
| libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/ |
| libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/ |
| libs-y += drivers/usb/host/ |
| libs-y += drivers/usb/musb/ |
| libs-y += drivers/usb/musb-new/ |
| libs-y += drivers/usb/phy/ |
| libs-y += drivers/usb/ulpi/ |
| libs-y += cmd/ |
| libs-y += common/ |
| libs-y += env/ |
| libs-$(CONFIG_API) += api/ |
| ifdef CONFIG_POST |
| libs-y += post/ |
| endif |
| libs-$(CONFIG_UNIT_TEST) += test/ test/dm/ |
| libs-$(CONFIG_UT_ENV) += test/env/ |
| libs-$(CONFIG_UT_OPTEE) += test/optee/ |
| libs-$(CONFIG_UT_OVERLAY) += test/overlay/ |
| |
| libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) |
| |
| libs-y := $(sort $(libs-y)) |
| |
| u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples |
| |
| u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-)))) |
| |
| libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) |
| |
| u-boot-init := $(head-y) |
| u-boot-main := $(libs-y) |
| |
| |
| # Add GCC lib |
| ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) |
| PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a |
| else |
| PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc |
| endif |
| PLATFORM_LIBS += $(PLATFORM_LIBGCC) |
| |
| ifdef CONFIG_CC_COVERAGE |
| KBUILD_CFLAGS += --coverage |
| PLATFORM_LIBGCC += -lgcov |
| endif |
| |
| export PLATFORM_LIBS |
| export PLATFORM_LIBGCC |
| |
| # Special flags for CPP when processing the linker script. |
| # Pass the version down so we can handle backwards compatibility |
| # on the fly. |
| LDPPFLAGS += \ |
| -include $(srctree)/include/u-boot/u-boot.lds.h \ |
| -DCPUDIR=$(CPUDIR) \ |
| $(shell $(LD) --version | \ |
| sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') |
| |
| ######################################################################### |
| ######################################################################### |
| |
| ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) |
| BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT)) |
| else |
| BOARD_SIZE_CHECK = |
| endif |
| |
| ifneq ($(CONFIG_SPL_SIZE_LIMIT),0) |
| SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit)) |
| else |
| SPL_SIZE_CHECK = |
| endif |
| |
| ifneq ($(CONFIG_TPL_SIZE_LIMIT),0) |
| TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT)) |
| else |
| TPL_SIZE_CHECK = |
| endif |
| |
| # Statically apply RELA-style relocations (currently arm64 only) |
| # This is useful for arm64 where static relocation needs to be performed on |
| # the raw binary, but certain simulators only accept an ELF file (but don't |
| # do the relocation). |
| ifneq ($(CONFIG_STATIC_RELA),) |
| # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base |
| DO_STATIC_RELA = \ |
| start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \ |
| end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \ |
| tools/relocate-rela $(2) $(3) $$start $$end |
| else |
| DO_STATIC_RELA = |
| endif |
| |
| # Always append ALL so that arch config.mk's can add custom ones |
| ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check |
| |
| ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin |
| ifeq ($(CONFIG_SPL_FSL_PBL),y) |
| ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin |
| else |
| ifneq ($(CONFIG_SECURE_BOOT), y) |
| # For Secure Boot The Image needs to be signed and Header must also |
| # be included. So The image has to be built explicitly |
| ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl |
| endif |
| endif |
| ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin |
| ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy) |
| ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img |
| else |
| ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy) |
| ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img |
| else |
| ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img |
| endif |
| endif |
| ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin |
| ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb |
| ifeq ($(CONFIG_SPL_FRAMEWORK),y) |
| ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img |
| endif |
| ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb |
| ifneq ($(CONFIG_SPL_TARGET),) |
| ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%) |
| endif |
| ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf |
| ALL-$(CONFIG_EFI_APP) += u-boot-app.efi |
| ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi |
| |
| ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),) |
| ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom |
| endif |
| |
| # Build a combined spl + u-boot image for sunxi |
| ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy) |
| ALL-y += u-boot-sunxi-with-spl.bin |
| endif |
| |
| # enable combined SPL/u-boot/dtb rules for tegra |
| ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy) |
| ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin |
| ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin |
| endif |
| |
| ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin |
| |
| # Add optional build target if defined in board/cpu/soc headers |
| ifneq ($(CONFIG_BUILD_TARGET),) |
| ALL-y += $(CONFIG_BUILD_TARGET:"%"=%) |
| endif |
| |
| ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy) |
| ALL-y += init_sp_bss_offset_check |
| endif |
| |
| ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) |
| ALL-y += u-boot-with-dtb.bin |
| endif |
| |
| ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy) |
| ALL-y += u-boot-rockchip.bin |
| endif |
| |
| LDFLAGS_u-boot += $(LDFLAGS_FINAL) |
| |
| # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards. |
| LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker) |
| |
| ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),) |
| LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) |
| endif |
| |
| # insure the checker run with the right endianness |
| CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian) |
| |
| # the checker needs the correct machine size |
| CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32) |
| |
| # Normally we fill empty space with 0xff |
| quiet_cmd_objcopy = OBJCOPY $@ |
| cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \ |
| $(OBJCOPYFLAGS_$(@F)) $< $@ |
| |
| # Provide a version which does not do this, for use by EFI |
| quiet_cmd_zobjcopy = OBJCOPY $@ |
| cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ |
| |
| quiet_cmd_efipayload = OBJCOPY $@ |
| cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@ |
| |
| MKIMAGEOUTPUT ?= /dev/null |
| |
| quiet_cmd_mkimage = MKIMAGE $@ |
| cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ |
| >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT)) |
| |
| quiet_cmd_mkfitimage = MKIMAGE $@ |
| cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\ |
| >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT)) |
| |
| quiet_cmd_cat = CAT $@ |
| cmd_cat = cat $(filter-out $(PHONY), $^) > $@ |
| |
| append = cat $(filter-out $< $(PHONY), $^) >> $@ |
| |
| quiet_cmd_pad_cat = CAT $@ |
| cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ |
| |
| cfg: u-boot.cfg |
| |
| quiet_cmd_cfgcheck = CFGCHK $2 |
| cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \ |
| $(srctree)/scripts/config_whitelist.txt $(srctree) |
| |
| all: $(ALL-y) |
| ifeq ($(CONFIG_DEPRECATED),y) |
| $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.") |
| ifeq ($(CONFIG_SPI),y) |
| ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy) |
| $(warning "The relevant config item with associated code will remove in v2019.07 release.") |
| endif |
| endif |
| endif |
| ifneq ($(CONFIG_DM),y) |
| @echo >&2 "===================== WARNING ======================" |
| @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be" |
| @echo >&2 "compulsory starting with the v2020.01 release." |
| @echo >&2 "Failure to update may result in board removal." |
| @echo >&2 "See doc/driver-model/migration.rst for more info." |
| @echo >&2 "====================================================" |
| endif |
| ifeq ($(CONFIG_MMC),y) |
| ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy) |
| @echo >&2 "===================== WARNING ======================" |
| @echo >&2 "This board does not use CONFIG_DM_MMC. Please update" |
| @echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release." |
| @echo >&2 "Failure to update by the deadline may result in board removal." |
| @echo >&2 "See doc/driver-model/migration.rst for more info." |
| @echo >&2 "====================================================" |
| endif |
| endif |
| ifeq ($(CONFIG_USB),y) |
| ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy) |
| @echo >&2 "===================== WARNING ======================" |
| @echo >&2 "This board does not use CONFIG_DM_USB. Please update" |
| @echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release." |
| @echo >&2 "Failure to update by the deadline may result in board removal." |
| @echo >&2 "See doc/driver-model/migration.rst for more info." |
| @echo >&2 "====================================================" |
| endif |
| endif |
| ifeq ($(CONFIG_MVSATA_IDE),y) |
| @echo >&2 "===================== WARNING ======================" |
| @echo >&2 "This board does use CONFIG_MVSATA_IDE which is not" |
| @echo >&2 "ported to driver-model (DM) yet. Please update the storage" |
| @echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07" |
| @echo >&2 "release." |
| @echo >&2 "Failure to update by the deadline may result in board removal." |
| @echo >&2 "See doc/driver-model/migration.rst for more info." |
| @echo >&2 "====================================================" |
| endif |
| ifeq ($(CONFIG_LIBATA),y) |
| ifneq ($(CONFIG_AHCI),y) |
| @echo >&2 "===================== WARNING ======================" |
| @echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not" |
| @echo >&2 "enabled. Please update the storage controller driver to use" |
| @echo >&2 "CONFIG_AHCI before the v2019.07 release." |
| @echo >&2 "Failure to update by the deadline may result in board removal." |
| @echo >&2 "See doc/driver-model/migration.rst for more info." |
| @echo >&2 "====================================================" |
| endif |
| endif |
| ifeq ($(CONFIG_PCI),y) |
| ifneq ($(CONFIG_DM_PCI),y) |
| @echo >&2 "===================== WARNING ======================" |
| @echo >&2 "This board does not use CONFIG_DM_PCI Please update" |
| @echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release." |
| @echo >&2 "Failure to update by the deadline may result in board removal." |
| @echo >&2 "See doc/driver-model/migration.rst for more info." |
| @echo >&2 "====================================================" |
| endif |
| endif |
| ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),) |
| ifneq ($(CONFIG_DM_VIDEO),y) |
| @echo >&2 "===================== WARNING ======================" |
| @echo >&2 "This board does not use CONFIG_DM_VIDEO Please update" |
| @echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release." |
| @echo >&2 "Failure to update by the deadline may result in board removal." |
| @echo >&2 "See doc/driver-model/migration.rst for more info." |
| @echo >&2 "====================================================" |
| endif |
| endif |
| ifeq ($(CONFIG_OF_EMBED),y) |
| @echo >&2 "===================== WARNING ======================" |
| @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only" |
| @echo >&2 "be used for debugging purposes. Please use" |
| @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline." |
| @echo >&2 "See doc/README.fdt-control for more info." |
| @echo >&2 "====================================================" |
| endif |
| ifeq ($(CONFIG_SPI_FLASH),y) |
| ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy) |
| @echo >&2 "===================== WARNING ======================" |
| @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update" |
| @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release." |
| @echo >&2 "Failure to update by the deadline may result in board removal." |
| @echo >&2 "See doc/driver-model/migration.rst for more info." |
| @echo >&2 "====================================================" |
| endif |
| endif |
| ifneq ($(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG),) |
| ifneq ($(CONFIG_WDT),y) |
| @echo >&2 "===================== WARNING ======================" |
| @echo >&2 "This board does not use CONFIG_WDT (DM watchdog support)." |
| @echo >&2 "Please update the board to use CONFIG_WDT before the" |
| @echo >&2 "v2019.10 release." |
| @echo >&2 "Failure to update by the deadline may result in board removal." |
| @echo >&2 "See doc/driver-model/migration.rst for more info." |
| @echo >&2 "====================================================" |
| endif |
| endif |
| ifneq ($(CONFIG_NET),) |
| ifneq ($(CONFIG_DM_ETH),y) |
| @echo >&2 "===================== WARNING ======================" |
| @echo >&2 "This board does not use CONFIG_DM_ETH (Driver Model" |
| @echo >&2 "for Ethernet drivers). Please update the board to use" |
| @echo >&2 "CONFIG_DM_ETH before the v2020.07 release. Failure to" |
| @echo >&2 "update by the deadline may result in board removal." |
| @echo >&2 "See doc/driver-model/migration.rst for more info." |
| @echo >&2 "====================================================" |
| endif |
| endif |
| @# Check that this build does not use CONFIG options that we do not |
| @# know about unless they are in Kconfig. All the existing CONFIG |
| @# options are whitelisted, so new ones should not be added. |
| $(call cmd,cfgcheck,u-boot.cfg) |
| |
| PHONY += dtbs |
| dtbs: dts/dt.dtb |
| @: |
| dts/dt.dtb: u-boot |
| $(Q)$(MAKE) $(build)=dts dtbs |
| |
| quiet_cmd_copy = COPY $@ |
| cmd_copy = cp $< $@ |
| |
| ifeq ($(CONFIG_MULTI_DTB_FIT),y) |
| |
| ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y) |
| FINAL_DTB_CONTAINER = fit-dtb.blob.lzo |
| else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y) |
| FINAL_DTB_CONTAINER = fit-dtb.blob.gz |
| else |
| FINAL_DTB_CONTAINER = fit-dtb.blob |
| endif |
| |
| fit-dtb.blob.gz: fit-dtb.blob |
| @gzip -kf9 $< > $@ |
| |
| fit-dtb.blob.lzo: fit-dtb.blob |
| @lzop -f9 $< > $@ |
| |
| fit-dtb.blob: dts/dt.dtb FORCE |
| $(call if_changed,mkimage) |
| ifneq ($(SOURCE_DATE_EPOCH),) |
| touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob |
| chmod 0600 fit-dtb.blob |
| endif |
| |
| MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ |
| -a 0 -e 0 -E \ |
| $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null |
| |
| ifneq ($(EXT_DTB),) |
| u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB) |
| $(call if_changed,cat) |
| else |
| u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER) |
| $(call if_changed,cat) |
| endif |
| |
| u-boot.bin: u-boot-fit-dtb.bin FORCE |
| $(call if_changed,copy) |
| |
| u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE |
| $(call if_changed,cat) |
| |
| else ifeq ($(CONFIG_OF_SEPARATE),y) |
| u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE |
| $(call if_changed,cat) |
| |
| u-boot.bin: u-boot-dtb.bin FORCE |
| $(call if_changed,copy) |
| else |
| u-boot.bin: u-boot-nodtb.bin FORCE |
| $(call if_changed,copy) |
| endif |
| |
| # we call Makefile in arch/arm/mach-imx which |
| # has targets which are dependent on targets defined |
| # here. make could not resolve them and we must ensure |
| # that they are finished before calling imx targets |
| ifeq ($(CONFIG_MULTI_DTB_FIT),y) |
| IMX_DEPS = u-boot-fit-dtb.bin |
| endif |
| |
| %.imx: $(IMX_DEPS) %.bin |
| $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ |
| $(BOARD_SIZE_CHECK) |
| |
| %.vyb: %.imx |
| $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@ |
| |
| quiet_cmd_copy = COPY $@ |
| cmd_copy = cp $< $@ |
| |
| u-boot.dtb: dts/dt.dtb |
| $(call cmd,copy) |
| |
| OBJCOPYFLAGS_u-boot.hex := -O ihex |
| |
| OBJCOPYFLAGS_u-boot.srec := -O srec |
| |
| u-boot.hex u-boot.srec: u-boot FORCE |
| $(call if_changed,objcopy) |
| |
| OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec) |
| |
| u-boot-elf.srec: u-boot.elf FORCE |
| $(call if_changed,objcopy) |
| |
| OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec) |
| |
| spl/u-boot-spl.srec: spl/u-boot-spl FORCE |
| $(call if_changed,objcopy) |
| |
| %.scif: %.srec |
| $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@ |
| |
| OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \ |
| $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \ |
| $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec) |
| |
| OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex) |
| |
| spl/u-boot-spl.hex: spl/u-boot-spl FORCE |
| $(call if_changed,objcopy) |
| |
| binary_size_check: u-boot-nodtb.bin FORCE |
| @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \ |
| map_size=$(shell cat u-boot.map | \ |
| awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \ |
| | sed 's/0X//g' \ |
| | bc); \ |
| if [ "" != "$$map_size" ]; then \ |
| if test $$map_size -ne $$file_size; then \ |
| echo "u-boot.map shows a binary size of $$map_size" >&2 ; \ |
| echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \ |
| exit 1; \ |
| fi \ |
| fi |
| |
| ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy) |
| ifneq ($(CONFIG_SYS_MALLOC_F_LEN),) |
| subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN))) |
| else |
| subtract_sys_malloc_f_len = true |
| endif |
| # The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is |
| # so low that the DTB could probably use 90%+ of the available space, for |
| # current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be |
| # safe for now and tweak this later if space becomes tight. |
| # A rejected alternative would be to check that some absolute minimum stack |
| # space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is |
| # deliberately build-specific, to take account of build-to-build stack usage |
| # differences due to different feature sets, there is no common absolute value |
| # to check against. |
| init_sp_bss_offset_check: u-boot.dtb FORCE |
| @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \ |
| space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \ |
| $(subtract_sys_malloc_f_len) ; \ |
| quarter_space=$$(($${space} / 4)) ; \ |
| if [ $${dtb_size} -gt $${quarter_space} ]; then \ |
| echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \ |
| echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \ |
| exit 1 ; \ |
| fi |
| endif |
| |
| u-boot-nodtb.bin: u-boot FORCE |
| $(call if_changed,objcopy) |
| $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE)) |
| $(BOARD_SIZE_CHECK) |
| |
| u-boot.ldr: u-boot |
| $(CREATE_LDR_ENV) |
| $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS) |
| $(BOARD_SIZE_CHECK) |
| |
| # binman |
| # --------------------------------------------------------------------------- |
| # Use 'make BINMAN_DEBUG=1' to enable debugging |
| quiet_cmd_binman = BINMAN $@ |
| cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \ |
| --toolpath $(objtree)/tools \ |
| $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \ |
| build -u -d u-boot.dtb -O . -m \ |
| -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \ |
| $(BINMAN_$(@F)) |
| |
| OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex |
| |
| OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec |
| |
| u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE |
| $(call if_changed,objcopy) |
| |
| # |
| # U-Boot entry point, needed for booting of full-blown U-Boot |
| # from the SPL U-Boot version. |
| # |
| ifndef CONFIG_SYS_UBOOT_START |
| CONFIG_SYS_UBOOT_START := $(CONFIG_SYS_TEXT_BASE) |
| endif |
| |
| # Boards with more complex image requirements can provide an .its source file |
| # or a generator script |
| ifneq ($(CONFIG_SPL_FIT_SOURCE),"") |
| U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE)) |
| else |
| ifneq ($(CONFIG_SPL_FIT_GENERATOR),"") |
| U_BOOT_ITS := u-boot.its |
| ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh") |
| U_BOOT_ITS_DEPS += u-boot-nodtb.bin |
| endif |
| ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py") |
| U_BOOT_ITS_DEPS += u-boot |
| endif |
| $(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE |
| $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \ |
| $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@ |
| endif |
| endif |
| |
| ifdef CONFIG_SPL_LOAD_FIT |
| MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ |
| -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ |
| -p $(CONFIG_FIT_EXTERNAL_OFFSET) \ |
| -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ |
| $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \ |
| $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST))) |
| else |
| MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \ |
| -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ |
| -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" |
| MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \ |
| -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ |
| -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" |
| u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log |
| endif |
| |
| MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img) |
| |
| # Some boards have the kwbimage.cfg file written in advance, while some |
| # other boards generate it on the fly during the build in the build tree. |
| # Let's check if the file exists in the build tree first, otherwise we |
| # fall back to use the one in the source tree. |
| KWD_CONFIG_FILE = $(shell \ |
| if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \ |
| echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \ |
| else \ |
| echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \ |
| fi) |
| |
| MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \ |
| -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) |
| |
| MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \ |
| -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \ |
| $(if $(KEYDIR),-k $(KEYDIR)) |
| |
| MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ |
| -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage |
| |
| ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) |
| UBOOT_BIN := u-boot-with-dtb.bin |
| else |
| UBOOT_BIN := u-boot.bin |
| endif |
| |
| u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \ |
| $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \ |
| $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \ |
| ,$(UBOOT_BIN)) FORCE |
| $(call if_changed,mkimage) |
| $(BOARD_SIZE_CHECK) |
| |
| ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y) |
| MKIMAGEFLAGS_u-boot.itb = |
| else |
| MKIMAGEFLAGS_u-boot.itb = -E |
| endif |
| |
| u-boot.itb: u-boot-nodtb.bin \ |
| $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \ |
| $(U_BOOT_ITS) FORCE |
| $(call if_changed,mkfitimage) |
| $(BOARD_SIZE_CHECK) |
| |
| u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE |
| $(call if_changed,mkimage) |
| |
| u-boot.sha1: u-boot.bin |
| tools/ubsha1 u-boot.bin |
| |
| u-boot.dis: u-boot |
| $(OBJDUMP) -d $< > $@ |
| |
| ifneq ($(CONFIG_SPL_PAYLOAD),) |
| SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%) |
| else |
| SPL_PAYLOAD := u-boot.bin |
| endif |
| |
| SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%) |
| |
| OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ |
| --pad-to=$(CONFIG_SPL_PAD_TO) |
| u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE |
| $(call if_changed,pad_cat) |
| |
| ifeq ($(CONFIG_ARCH_ROCKCHIP),y) |
| |
| # rockchip image type |
| ifeq ($(CONFIG_SPL_SPI_LOAD),y) |
| ROCKCHIP_IMG_TYPE := rkspi |
| else |
| ROCKCHIP_IMG_TYPE := rksd |
| endif |
| |
| # TPL + SPL |
| ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy) |
| MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) |
| tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE |
| $(call if_changed,mkimage) |
| idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE |
| $(call if_changed,cat) |
| else |
| MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) |
| idbloader.img: spl/u-boot-spl.bin FORCE |
| $(call if_changed,mkimage) |
| endif |
| |
| ifeq ($(CONFIG_ARM64),) |
| u-boot-rockchip.bin: idbloader.img u-boot.img FORCE |
| $(call if_changed,binman) |
| else |
| OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \ |
| --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff |
| u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE |
| $(call if_changed,pad_cat) |
| endif # CONFIG_ARM64 |
| |
| endif # CONFIG_ARCH_ROCKCHIP |
| |
| ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy) |
| MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE) |
| |
| lpc32xx-spl.img: spl/u-boot-spl.bin FORCE |
| $(call if_changed,mkimage) |
| |
| OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) |
| |
| lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE |
| $(call if_changed,objcopy) |
| |
| OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) |
| |
| lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE |
| $(call if_changed,objcopy) |
| |
| lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE |
| $(call if_changed,cat) |
| |
| endif |
| |
| OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \ |
| --pad-to=$(CONFIG_TPL_PAD_TO) |
| tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE |
| $(call if_changed,pad_cat) |
| |
| SPL: spl/u-boot-spl.bin FORCE |
| $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ |
| |
| ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y) |
| ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y) |
| u-boot.cnt: u-boot.bin FORCE |
| $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ |
| |
| flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE |
| $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ |
| else |
| flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE |
| $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ |
| endif |
| endif |
| |
| u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE |
| $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ |
| |
| MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE) |
| |
| u-boot.ubl: u-boot-with-spl.bin FORCE |
| $(call if_changed,mkimage) |
| |
| MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \ |
| $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \ |
| -T aisimage -e $(CONFIG_SPL_TEXT_BASE) |
| spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE |
| $(call if_changed,mkimage) |
| |
| OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) |
| u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE |
| $(call if_changed,pad_cat) |
| |
| u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin |
| $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb |
| u-boot.sb: u-boot.bin spl/u-boot-spl.bin |
| $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb |
| |
| # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. |
| # Both images are created using mkimage (crc etc), so that the ROM |
| # bootloader can check its integrity. Padding needs to be done to the |
| # SPL image (with mkimage header) and not the binary. Otherwise the resulting image |
| # which is loaded/copied by the ROM bootloader to SRAM doesn't fit. |
| # The resulting image containing both U-Boot images is called u-boot.spr |
| MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \ |
| -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER |
| spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE |
| $(call if_changed,mkimage) |
| |
| OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ |
| --gap-fill=0xff |
| u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE |
| $(call if_changed,pad_cat) |
| |
| ifneq ($(CONFIG_ARCH_SOCFPGA),) |
| quiet_cmd_socboot = SOCBOOT $@ |
| cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \ |
| spl/u-boot-spl.sfp spl/u-boot-spl.sfp \ |
| u-boot.img > $@ || rm -f $@ |
| u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE |
| $(call if_changed,socboot) |
| |
| quiet_cmd_socnandboot = SOCNANDBOOT $@ |
| cmd_socnandboot = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \ |
| cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \ |
| spl/u-boot-spl.sfp spl/u-boot-spl.pad \ |
| spl/u-boot-spl.sfp spl/u-boot-spl.pad \ |
| spl/u-boot-spl.sfp spl/u-boot-spl.pad \ |
| u-boot.img > $@ || rm -f $@ spl/u-boot-spl.pad |
| u-boot-with-nand-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE |
| $(call if_changed,socnandboot) |
| |
| endif |
| |
| ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) |
| u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \ |
| $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE |
| $(call if_changed,binman) |
| |
| ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y) |
| OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec |
| u-boot-br.bin: u-boot FORCE |
| $(call if_changed,objcopy) |
| endif |
| endif |
| |
| # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including |
| # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in |
| # the middle. This is handled by binman based on an image description in the |
| # board's device tree. |
| ifneq ($(CONFIG_X86_RESET_VECTOR),) |
| rom: u-boot.rom FORCE |
| |
| refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE |
| $(call if_changed,copy) |
| |
| quiet_cmd_ldr = LD $@ |
| cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \ |
| $(filter-out FORCE,$^) -o $@ |
| |
| u-boot.rom: u-boot-x86-start16.bin u-boot-x86-reset16.bin u-boot.bin \ |
| $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \ |
| $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \ |
| $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE |
| $(call if_changed,binman) |
| |
| OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16 |
| u-boot-x86-start16.bin: u-boot FORCE |
| $(call if_changed,objcopy) |
| |
| OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec |
| u-boot-x86-reset16.bin: u-boot FORCE |
| $(call if_changed,objcopy) |
| endif |
| |
| ifneq ($(CONFIG_ARCH_SUNXI),) |
| ifeq ($(CONFIG_ARM64),) |
| u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE |
| $(call if_changed,binman) |
| else |
| u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE |
| $(call if_changed,cat) |
| endif |
| endif |
| |
| ifneq ($(CONFIG_TEGRA),) |
| ifneq ($(CONFIG_BINMAN),) |
| # Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin |
| %-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: \ |
| spl/%-spl %.bin FORCE |
| $(call if_changed,binman) |
| else |
| OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) |
| u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE |
| $(call if_changed,pad_cat) |
| |
| OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) |
| u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE |
| $(call if_changed,pad_cat) |
| |
| u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE |
| $(call if_changed,copy) |
| endif # binman |
| endif |
| |
| OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI) |
| u-boot-app.efi: u-boot FORCE |
| $(call if_changed,zobjcopy) |
| |
| u-boot.bin.o: u-boot.bin FORCE |
| $(call if_changed,efipayload) |
| |
| u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE |
| $(call if_changed_dep,cpp_lds) |
| |
| # Rule to link the EFI payload which contains a stub and a U-Boot binary |
| quiet_cmd_u-boot_payload ?= LD $@ |
| cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \ |
| -T u-boot-payload.lds arch/x86/cpu/call32.o \ |
| lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \ |
| $(addprefix arch/$(ARCH)/lib/,$(EFISTUB)) |
| |
| u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE |
| $(call if_changed,u-boot_payload) |
| |
| OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI) |
| u-boot-payload.efi: u-boot-payload FORCE |
| $(call if_changed,zobjcopy) |
| |
| u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE |
| $(call if_changed,cat) |
| |
| #Add a target to create boot binary having SPL binary in PBI format |
| #concatenated with u-boot binary. It is need by PowerPC SoC having |
| #internal SRAM <= 512KB. |
| MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ |
| -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \ |
| -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE) |
| |
| spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE |
| $(call if_changed,mkimage) |
| |
| ifeq ($(ARCH),arm) |
| UBOOT_BINLOAD := u-boot.img |
| else |
| ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) |
| UBOOT_BINLOAD := u-boot-with-dtb.bin |
| else |
| UBOOT_BINLOAD := u-boot.bin |
| endif |
| endif |
| |
| OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ |
| --gap-fill=0xff |
| |
| u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE |
| $(call if_changed,pad_cat) |
| |
| # PPC4xx needs the SPL at the end of the image, since the reset vector |
| # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target |
| # and need to introduce a new build target with the full blown U-Boot |
| # at the start padded up to the start of the SPL image. And then concat |
| # the SPL image to the end. |
| |
| OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \ |
| --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff |
| u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE |
| $(call if_changed,pad_cat) |
| |
| quiet_cmd_u-boot-elf ?= LD $@ |
| cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \ |
| -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \ |
| -Ttext=$(CONFIG_SYS_TEXT_BASE) |
| u-boot.elf: u-boot.bin u-boot-elf.lds |
| $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o |
| $(call if_changed,u-boot-elf) |
| |
| u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE |
| $(call if_changed_dep,cpp_lds) |
| |
| # MediaTek's ARM-based u-boot needs a header to contains its load address |
| # which is parsed by the BootROM. |
| # If the SPL build is enabled, the header will be added to the spl binary, |
| # and the spl binary and the u-boot.img will be combined into one file. |
| # Otherwise the header will be added to the u-boot.bin directly. |
| |
| ifeq ($(CONFIG_SPL),y) |
| spl/u-boot-spl-mtk.bin: spl/u-boot-spl |
| |
| u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE |
| $(call if_changed,binman) |
| else |
| MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \ |
| -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \ |
| -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))" |
| |
| u-boot-mtk.bin: u-boot.bin FORCE |
| $(call if_changed,mkimage) |
| endif |
| |
| ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink) |
| |
| # Rule to link u-boot |
| # May be overridden by arch/$(ARCH)/config.mk |
| quiet_cmd_u-boot__ ?= LD $@ |
| cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \ |
| -T u-boot.lds $(u-boot-init) \ |
| --start-group $(u-boot-main) --end-group \ |
| $(PLATFORM_LIBS) -Map u-boot.map; \ |
| $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true) |
| |
| quiet_cmd_smap = GEN common/system_map.o |
| cmd_smap = \ |
| smap=`$(call SYSTEM_MAP,u-boot) | \ |
| awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ |
| $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \ |
| -c $(srctree)/common/system_map.c -o common/system_map.o |
| |
| u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE |
| +$(call if_changed,u-boot__) |
| ifeq ($(CONFIG_KALLSYMS),y) |
| $(call cmd,smap) |
| $(call cmd,u-boot__) common/system_map.o |
| endif |
| |
| ifeq ($(CONFIG_RISCV),y) |
| @tools/prelink-riscv $@ 0 |
| endif |
| |
| quiet_cmd_sym ?= SYM $@ |
| cmd_sym ?= $(OBJDUMP) -t $< > $@ |
| u-boot.sym: u-boot FORCE |
| $(call if_changed,sym) |
| |
| # The actual objects are generated when descending, |
| # make sure no implicit rule kicks in |
| $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; |
| |
| # Handle descending into subdirectories listed in $(u-boot-dirs) |
| # Preset locale variables to speed up the build process. Limit locale |
| # tweaks to this spot to avoid wrong language settings when running |
| # make menuconfig etc. |
| # Error messages still appears in the original language |
| |
| PHONY += $(u-boot-dirs) |
| $(u-boot-dirs): prepare scripts |
| $(Q)$(MAKE) $(build)=$@ |
| |
| tools: prepare |
| # The "tools" are needed early |
| $(filter-out tools, $(u-boot-dirs)): tools |
| # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC |
| # is "yes"), so compile examples after U-Boot is compiled. |
| examples: $(filter-out examples, $(u-boot-dirs)) |
| |
| define filechk_uboot.release |
| echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" |
| endef |
| |
| # Store (new) UBOOTRELEASE string in include/config/uboot.release |
| include/config/uboot.release: include/config/auto.conf FORCE |
| $(call filechk,uboot.release) |
| |
| |
| # Things we need to do before we recursively start building the kernel |
| # or the modules are listed in "prepare". |
| # A multi level approach is used. prepareN is processed before prepareN-1. |
| # archprepare is used in arch Makefiles and when processed asm symlink, |
| # version.h and scripts_basic is processed / created. |
| |
| # Listed in dependency order |
| PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 |
| |
| # prepare3 is used to check if we are building in a separate output directory, |
| # and if so do: |
| # 1) Check that make has not been executed in the kernel src $(srctree) |
| prepare3: include/config/uboot.release |
| ifneq ($(KBUILD_SRC),) |
| @$(kecho) ' Using $(srctree) as source for U-Boot' |
| $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ |
| echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \ |
| echo >&2 " in the '$(srctree)' directory.";\ |
| /bin/false; \ |
| fi; |
| endif |
| |
| # prepare2 creates a makefile if using a separate output directory |
| prepare2: prepare3 outputmakefile cfg |
| |
| prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) \ |
| include/config/auto.conf |
| ifeq ($(wildcard $(LDSCRIPT)),) |
| @echo >&2 " Could not find linker script." |
| @/bin/false |
| endif |
| |
| ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y) |
| prepare1: $(defaultenv_h) |
| endif |
| |
| archprepare: prepare1 scripts_basic |
| |
| prepare0: archprepare FORCE |
| $(Q)$(MAKE) $(build)=. |
| |
| # All the preparing.. |
| prepare: prepare0 |
| |
| # Generate some files |
| # --------------------------------------------------------------------------- |
| |
| define filechk_version.h |
| (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \ |
| echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \ |
| echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \ |
| echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; ) |
| endef |
| |
| # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date. |
| # The BSD date on the other hand behaves different and would produce errors |
| # with the misused '-d' switch. Respect that and search a working date with |
| # well known pre- and suffixes for the GNU variant of date. |
| define filechk_timestamp.h |
| (if test -n "$${SOURCE_DATE_EPOCH}"; then \ |
| SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \ |
| DATE=""; \ |
| for date in gdate date.gnu date; do \ |
| $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \ |
| done; \ |
| if test -n "$${DATE}"; then \ |
| LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \ |
| LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \ |
| LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \ |
| LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \ |
| LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \ |
| else \ |
| return 42; \ |
| fi; \ |
| else \ |
| LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \ |
| LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \ |
| LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \ |
| LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \ |
| LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \ |
| fi) |
| endef |
| |
| define filechk_defaultenv.h |
| (grep -v '^#' | \ |
| grep -v '^$$' | \ |
| tr '\n' '\0' | \ |
| sed -e 's/\\\x0\s*//g' | \ |
| xxd -i ; echo ", 0x00" ; ) |
| endef |
| |
| define filechk_dt.h |
| (if test -n "$${DEVICE_TREE}"; then \ |
| echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \ |
| else \ |
| echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \ |
| fi) |
| endef |
| |
| $(version_h): include/config/uboot.release FORCE |
| $(call filechk,version.h) |
| |
| $(timestamp_h): $(srctree)/Makefile FORCE |
| $(call filechk,timestamp.h) |
| |
| $(dt_h): $(srctree)/Makefile FORCE |
| $(call filechk,dt.h) |
| |
| $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE |
| $(call filechk,defaultenv.h) |
| |
| # --------------------------------------------------------------------------- |
| quiet_cmd_cpp_lds = LDS $@ |
| cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \ |
| -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $< |
| |
| u-boot.lds: $(LDSCRIPT) prepare FORCE |
| $(call if_changed_dep,cpp_lds) |
| |
| spl/u-boot-spl.bin: spl/u-boot-spl |
| @: |
| $(SPL_SIZE_CHECK) |
| |
| spl/u-boot-spl: tools prepare \ |
| $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \ |
| $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb) |
| $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all |
| |
| spl/sunxi-spl.bin: spl/u-boot-spl |
| @: |
| |
| spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin |
| @: |
| |
| spl/u-boot-spl.sfp: spl/u-boot-spl |
| @: |
| |
| spl/boot.bin: spl/u-boot-spl |
| @: |
| |
| tpl/u-boot-tpl.bin: tools prepare \ |
| $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) |
| $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all |
| $(TPL_SIZE_CHECK) |
| |
| TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include) |
| |
| FIND := find |
| FINDFLAGS := -L |
| |
| tags ctags: |
| ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ |
| -name '*.[chS]' -print` |
| ln -s ctags tags |
| |
| etags: |
| etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ |
| -name '*.[chS]' -print` |
| cscope: |
| $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \ |
| cscope.files |
| @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \ |
| grep -xvf - cscope.files > cscope.files.no-symlinks; \ |
| mv cscope.files.no-symlinks cscope.files |
| cscope -b -q -k |
| |
| SYSTEM_MAP = \ |
| $(NM) $1 | \ |
| grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ |
| LC_ALL=C sort |
| System.map: u-boot |
| @$(call SYSTEM_MAP,$<) > $@ |
| |
| ######################################################################### |
| |
| # ARM relocations should all be R_ARM_RELATIVE (32-bit) or |
| # R_AARCH64_RELATIVE (64-bit). |
| checkarmreloc: u-boot |
| @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \ |
| grep R_A | sort -u`"; \ |
| if test "$$RELOC" != "R_ARM_RELATIVE" -a \ |
| "$$RELOC" != "R_AARCH64_RELATIVE"; then \ |
| echo "$< contains unexpected relocations: $$RELOC"; \ |
| false; \ |
| fi |
| |
| tools/version.h: include/version.h |
| $(Q)mkdir -p $(dir $@) |
| $(call if_changed,copy) |
| |
| envtools: scripts_basic $(version_h) $(timestamp_h) tools/version.h |
| $(Q)$(MAKE) $(build)=tools/env |
| |
| tools-only: export TOOLS_ONLY=y |
| tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h |
| $(Q)$(MAKE) $(build)=tools |
| |
| tools-all: export HOST_TOOLS_ALL=y |
| tools-all: envtools tools ; |
| |
| cross_tools: export CROSS_BUILD_TOOLS=y |
| cross_tools: tools ; |
| |
| .PHONY : CHANGELOG |
| CHANGELOG: |
| git log --no-merges U-Boot-1_1_5.. | \ |
| unexpand -a | sed -e 's/\s\s*$$//' > $@ |
| |
| ######################################################################### |
| |
| ### |
| # Cleaning is done on three levels. |
| # make clean Delete most generated files |
| # Leave enough to build external modules |
| # make mrproper Delete the current configuration, and all generated files |
| # make distclean Remove editor backup files, patch leftover files and the like |
| |
| # Directories & files removed with 'make clean' |
| CLEAN_DIRS += $(MODVERDIR) \ |
| $(foreach d, spl tpl, $(patsubst %,$d/%, \ |
| $(filter-out include, $(shell ls -1 $d 2>/dev/null)))) |
| |
| CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h tools/version.h \ |
| boot* u-boot* MLO* SPL System.map fit-dtb.blob* \ |
| u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \ |
| lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \ |
| idbloader.img flash.bin flash.log |
| |
| # Directories & files removed with 'make mrproper' |
| MRPROPER_DIRS += include/config include/generated spl tpl \ |
| .tmp_objdiff |
| MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \ |
| ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \ |
| drivers/video/fonts/*.S |
| |
| # clean - Delete most, but leave enough to build external modules |
| # |
| clean: rm-dirs := $(CLEAN_DIRS) |
| clean: rm-files := $(CLEAN_FILES) |
| |
| clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f)) |
| |
| clean-dirs := $(addprefix _clean_, $(clean-dirs)) |
| |
| PHONY += $(clean-dirs) clean archclean |
| $(clean-dirs): |
| $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) |
| |
| clean: $(clean-dirs) |
| $(call cmd,rmdirs) |
| $(call cmd,rmfiles) |
| @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ |
| \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ |
| -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \ |
| -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ |
| -o -name '*.lex.c' -o -name '*.tab.[ch]' \ |
| -o -name '*.asn1.[ch]' \ |
| -o -name '*.symtypes' -o -name 'modules.order' \ |
| -o -name modules.builtin -o -name '.tmp_*.o.*' \ |
| -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \ |
| -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \ |
| -type f -print | xargs rm -f |
| |
| # mrproper - Delete all generated files, including .config |
| # |
| mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) |
| mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) |
| mrproper-dirs := $(addprefix _mrproper_,scripts) |
| |
| PHONY += $(mrproper-dirs) mrproper archmrproper |
| $(mrproper-dirs): |
| $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) |
| |
| mrproper: clean $(mrproper-dirs) |
| $(call cmd,rmdirs) |
| $(call cmd,rmfiles) |
| @rm -f arch/*/include/asm/arch |
| |
| # distclean |
| # |
| PHONY += distclean |
| |
| distclean: mrproper |
| @find $(srctree) $(RCS_FIND_IGNORE) \ |
| \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ |
| -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ |
| -o -name '.*.rej' -o -name '*%' -o -name 'core' \ |
| -o -name '*.pyc' \) \ |
| -type f -print | xargs rm -f |
| @rm -f boards.cfg CHANGELOG |
| |
| backup: |
| F=`basename $(srctree)` ; cd .. ; \ |
| gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F |
| |
| help: |
| @echo 'Cleaning targets:' |
| @echo ' clean - Remove most generated files but keep the config' |
| @echo ' mrproper - Remove all generated files + config + various backup files' |
| @echo ' distclean - mrproper + remove editor backup and patch files' |
| @echo '' |
| @echo 'Configuration targets:' |
| @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help |
| @echo '' |
| @echo 'Test targets:' |
| @echo '' |
| @echo ' check - Run all automated tests that use sandbox' |
| @echo ' qcheck - Run quick automated tests that use sandbox' |
| @echo '' |
| @echo 'Other generic targets:' |
| @echo ' all - Build all necessary images depending on configuration' |
| @echo ' tests - Build U-Boot for sandbox and run tests' |
| @echo '* u-boot - Build the bare u-boot' |
| @echo ' dir/ - Build all files in dir and below' |
| @echo ' dir/file.[oisS] - Build specified target only' |
| @echo ' dir/file.lst - Build specified mixed source/assembly target only' |
| @echo ' (requires a recent binutils and recent build (System.map))' |
| @echo ' tags/ctags - Generate ctags file for editors' |
| @echo ' etags - Generate etags file for editors' |
| @echo ' cscope - Generate cscope index' |
| @echo ' ubootrelease - Output the release version string (use with make -s)' |
| @echo ' ubootversion - Output the version stored in Makefile (use with make -s)' |
| @echo " cfg - Don't build, just create the .cfg files" |
| @echo " envtools - Build only the target-side environment tools" |
| @echo '' |
| @echo 'Static analysers' |
| @echo ' checkstack - Generate a list of stack hogs' |
| @echo ' coccicheck - Execute static code analysis with Coccinelle' |
| @echo '' |
| @echo 'Documentation targets:' |
| @$(MAKE) -f $(srctree)/doc/Makefile dochelp |
| @echo '' |
| @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' |
| @echo ' make V=2 [targets] 2 => give reason for rebuild of target' |
| @echo ' make O=dir [targets] Locate all output files in "dir", including .config' |
| @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' |
| @echo ' make C=2 [targets] Force check of all c source with $$CHECK' |
| @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' |
| @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' |
| @echo ' 1: warnings which may be relevant and do not occur too often' |
| @echo ' 2: warnings which occur quite often but may still be relevant' |
| @echo ' 3: more obscure warnings, can most likely be ignored' |
| @echo ' Multiple levels can be combined with W=12 or W=123' |
| @echo '' |
| @echo 'Execute "make" or "make all" to build all targets marked with [*] ' |
| @echo 'For further info see the ./README file' |
| |
| tests check: |
| $(srctree)/test/run |
| |
| qcheck: |
| $(srctree)/test/run quick |
| |
| # Documentation targets |
| # --------------------------------------------------------------------------- |
| DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \ |
| linkcheckdocs dochelp refcheckdocs |
| PHONY += $(DOC_TARGETS) |
| $(DOC_TARGETS): scripts_basic FORCE |
| $(Q)$(MAKE) $(build)=doc $@ |
| |
| endif #ifeq ($(config-targets),1) |
| endif #ifeq ($(mixed-targets),1) |
| |
| PHONY += checkstack ubootrelease ubootversion |
| |
| checkstack: |
| $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \ |
| $(PERL) $(src)/scripts/checkstack.pl $(ARCH) |
| |
| ubootrelease: |
| @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" |
| |
| ubootversion: |
| @echo $(UBOOTVERSION) |
| |
| # Single targets |
| # --------------------------------------------------------------------------- |
| # Single targets are compatible with: |
| # - build with mixed source and output |
| # - build with separate output dir 'make O=...' |
| # - external modules |
| # |
| # target-dir => where to store outputfile |
| # build-dir => directory in kernel source tree to use |
| |
| ifeq ($(KBUILD_EXTMOD),) |
| build-dir = $(patsubst %/,%,$(dir $@)) |
| target-dir = $(dir $@) |
| else |
| zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@))) |
| build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash)) |
| target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@)) |
| endif |
| |
| %.s: %.c prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.i: %.c prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.o: %.c prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.lst: %.c prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.s: %.S prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.o: %.S prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| %.symtypes: %.c prepare scripts FORCE |
| $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) |
| |
| # Modules |
| /: prepare scripts FORCE |
| $(cmd_crmodverdir) |
| $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ |
| $(build)=$(build-dir) |
| %/: prepare scripts FORCE |
| $(cmd_crmodverdir) |
| $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ |
| $(build)=$(build-dir) |
| %.ko: prepare scripts FORCE |
| $(cmd_crmodverdir) |
| $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ |
| $(build)=$(build-dir) $(@:.ko=.o) |
| $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost |
| |
| quiet_cmd_genenv = GENENV $@ |
| cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \ |
| sed --in-place -e 's/\x00/\x0A/g' $@ |
| |
| u-boot-initial-env: u-boot.bin |
| $(call if_changed,genenv) |
| |
| # Consistency checks |
| # --------------------------------------------------------------------------- |
| |
| PHONY += coccicheck |
| |
| coccicheck: |
| $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@ |
| |
| # FIXME Should go into a make.lib or something |
| # =========================================================================== |
| |
| quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) |
| cmd_rmdirs = rm -rf $(rm-dirs) |
| |
| quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) |
| cmd_rmfiles = rm -f $(rm-files) |
| |
| # read all saved command lines |
| |
| targets := $(wildcard $(sort $(targets))) |
| cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) |
| |
| ifneq ($(cmd_files),) |
| $(cmd_files): ; # Do not try to update included dependency files |
| include $(cmd_files) |
| endif |
| |
| endif # skip-makefile |
| |
| PHONY += FORCE |
| FORCE: |
| |
| # Declare the contents of the PHONY variable as phony. We keep that |
| # information in a variable so we can use it in if_changed and friends. |
| .PHONY: $(PHONY) |