blob: 0f6e0d75ece6ce38032322cd80871f14840180a6 [file] [log] [blame]
<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// doedit page (hymod_bddb / boards)
require("defs.php");
pg_head("$bddb_label - Board Registration Results");
if (($serno=intval($serno)) != 0)
die("serial number must not be set ($serno) when Creating!");
$query="update boards set";
list($y, $m, $d) = split("-", $date);
if (!checkdate($m, $d, $y) || $y < 1999)
die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')");
$query.=" date='$date'";
if ($batch != '') {
if (strlen($batch) > 32)
die("batch field too long (>32)");
$query.=", batch='$batch'";
}
if (!in_array($type, $type_vals))
die("Invalid type ($type) specified");
$query.=", type='$type'";
if (($rev = intval($rev)) <= 0 || $rev > 255)
die("Revision number is invalid ($rev)");
$query.=sprintf(", rev=%d", $rev);
$query.=gather_enum_multi_query("sdram", 4);
$query.=gather_enum_multi_query("flash", 4);
$query.=gather_enum_multi_query("zbt", 16);
$query.=gather_enum_multi_query("xlxtyp", 4);
$nxlx = count_enum_multi("xlxtyp", 4);
$query.=gather_enum_multi_query("xlxspd", 4);
if (count_enum_multi("xlxspd", 4) != $nxlx)
die("number of xilinx speeds not same as number of types");
$query.=gather_enum_multi_query("xlxtmp", 4);
if (count_enum_multi("xlxtmp", 4) != $nxlx)
die("number of xilinx temps. not same as number of types");
$query.=gather_enum_multi_query("xlxgrd", 4);
if (count_enum_multi("xlxgrd", 4) != $nxlx)
die("number of xilinx grades not same as number of types");
if ($cputyp == '') {
if ($cpuspd != '')
die("can't specify cpu speed if there is no cpu");
if ($cpmspd != '')
die("can't specify cpm speed if there is no cpu");
if ($busspd != '')
die("can't specify bus speed if there is no cpu");
}
else {
$query.=", cputyp='$cputyp'";
if ($cpuspd == '')
die("must specify cpu speed if cpu type is defined");
$query.=", cpuspd='$cpuspd'";
if ($cpmspd == '')
die("must specify cpm speed if cpu type is defined");
$query.=", cpmspd='$cpmspd'";
if ($busspd == '')
die("must specify bus speed if cpu type is defined");
$query.=", busspd='$busspd'";
}
if (($hschin = intval($hschin)) < 0 || $hschin > 4)
die("Invalid number of hs input chans ($hschin)");
if (($hschout = intval($hschout)) < 0 || $hschout > 4)
die("Invalid number of hs output chans ($hschout)");
if ($hstype == '') {
if ($hschin != 0)
die("number of high-speed input channels must be zero"
. " if high-speed chip is not present");
if ($hschout != 0)
die("number of high-speed output channels must be zero"
. " if high-speed chip is not present");
}
else
$query.=", hstype='$hstype'";
$query.=", hschin='$hschin'";
$query.=", hschout='$hschout'";
// echo "final query = '$query'<br>\n";
$quant = intval($quant);
if ($quant <= 0) $quant = 1;
$sernos = array();
if ($geneths)
$ethaddrs = array();
$sqlerr = '';
while ($quant-- > 0) {
mysql_query("insert into boards (serno) values (null)");
if (mysql_errno()) {
$sqlerr = mysql_error();
break;
}
$serno = mysql_insert_id();
if (!$serno) {
$sqlerr = "couldn't allocate new serial number";
break;
}
mysql_query($query . " where serno=$serno");
if (mysql_errno()) {
$sqlerr = mysql_error();
break;
}
array_push($sernos, $serno);
if ($geneths) {
$ethaddr = gen_eth_addr($serno);
mysql_query("update boards set ethaddr='$ethaddr'" .
" where serno=$serno");
if (mysql_errno()) {
$sqlerr = mysql_error();
array_push($ethaddrs,
"<font color=#ff0000><b>" .
"db save fail" .
"</b></font>");
break;
}
array_push($ethaddrs, $ethaddr);
}
}
$nsernos = count($sernos);
if ($nsernos > 0) {
write_eeprom_cfg_file();
echo "<font size=+2>\n";
echo "\t<p>\n";
echo "\t\tThe following board serial numbers were"
. " successfully allocated";
if ($numerrs > 0)
echo " (but with $numerrs cfg file error" .
($numerrs > 1 ? "s" : "") . ")";
echo ":\n";
echo "\t</p>\n";
echo "</font>\n";
echo "<table align=center width=\"100%\">\n";
echo "<tr>\n";
echo "\t<th>Serial Number</th>\n";
if ($numerrs > 0)
echo "\t<th>Cfg File Errs</th>\n";
if ($geneths)
echo "\t<th>Ethernet Address</th>\n";
echo "</tr>\n";
for ($i = 0; $i < $nsernos; $i++) {
$serno = sprintf("%010d", $sernos[$i]);
echo "<tr>\n";
echo "\t<td align=center><font size=+2>" .
"<b>$serno</b></font></td>\n";
if ($numerrs > 0) {
if (($errstr = $cfgerrs[$i]) == '')
$errstr = '&nbsp;';
echo "\t<td align=center>" .
"<font size=+2 color=#ff0000><b>" .
$errstr .
"</b></font></td>\n";
}
if ($geneths) {
echo "\t<td align=center>" .
"<font size=+2 color=#00ff00><b>" .
$ethaddrs[$i] .
"</b></font></td>\n";
}
echo "</tr>\n";
}
echo "</table>\n";
}
if ($sqlerr != '') {
echo "\t<font size=+4>\n";
echo "\t\t<p>\n";
echo "\t\t\tThe following SQL error was encountered:\n";
echo "\t\t</p>\n";
echo "\t\t<center>\n";
printf("\t\t\t<b>%s</b>\n", $sqlerr);
echo "\t\t</center>\n";
echo "\t</font>\n";
}
?>
<p>
<table align=center width="100%">
<tr>
<td align=center><a href="browse.php">Go to Browse</a></td>
<td align=center><a href="index.php">Back to Start</a></td>
</tr>
</table>
<?php
pg_foot();
?>