blob: 8617f7445f300b0f0d179cfe3029a94abddb1afd [file] [log] [blame]
/*
* (C) Copyright 2006 Detlev Zundel, dzu@denx.de
* (C) Copyright 2006 DENX Software Engineering
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#if defined(CONFIG_CMD_NAND)
#include <nand.h>
#if defined(CONFIG_IDS852_REV1)
/*
* hardware specific access to control-lines
*/
static void nc650_hwcontrol(struct mtd_info *mtd, int cmd)
{
struct nand_chip *this = mtd->priv;
switch(cmd) {
case NAND_CTL_SETCLE:
this->IO_ADDR_W += 2;
break;
case NAND_CTL_CLRCLE:
this->IO_ADDR_W -= 2;
break;
case NAND_CTL_SETALE:
this->IO_ADDR_W += 1;
break;
case NAND_CTL_CLRALE:
this->IO_ADDR_W -= 1;
break;
case NAND_CTL_SETNCE:
case NAND_CTL_CLRNCE:
/* nop */
break;
}
}
#elif defined(CONFIG_IDS852_REV2)
/*
* hardware specific access to control-lines
*/
static void nc650_hwcontrol(struct mtd_info *mtd, int cmd)
{
struct nand_chip *this = mtd->priv;
switch(cmd) {
case NAND_CTL_SETCLE:
*(((volatile __u8 *) this->IO_ADDR_W) + 0xa) = 0;
break;
case NAND_CTL_CLRCLE:
*(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0;
break;
case NAND_CTL_SETALE:
*(((volatile __u8 *) this->IO_ADDR_W) + 0x9) = 0;
break;
case NAND_CTL_CLRALE:
*(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0;
break;
case NAND_CTL_SETNCE:
*(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0;
break;
case NAND_CTL_CLRNCE:
*(((volatile __u8 *) this->IO_ADDR_W) + 0xc) = 0;
break;
}
}
#else
#error Unknown IDS852 module revision
#endif
/*
* Board-specific NAND initialization. The following members of the
* argument are board-specific (per include/linux/mtd/nand.h):
* - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
* - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
* - hwcontrol: hardwarespecific function for accesing control-lines
* - dev_ready: hardwarespecific function for accesing device ready/busy line
* - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
* only be provided if a hardware ECC is available
* - eccmode: mode of ecc, see defines
* - chip_delay: chip dependent delay for transfering data from array to
* read regs (tR)
* - options: various chip options. They can partly be set to inform
* nand_scan about special functionality. See the defines for further
* explanation
* Members with a "?" were not set in the merged testing-NAND branch,
* so they are not set here either.
*/
int board_nand_init(struct nand_chip *nand)
{
nand->hwcontrol = nc650_hwcontrol;
nand->eccmode = NAND_ECC_SOFT;
nand->chip_delay = 12;
/* nand->options = NAND_SAMSUNG_LP_OPTIONS;*/
return 0;
}
#endif