| CONFIG_ARM=y |
| CONFIG_ARCH_UNIPHIER=y |
| CONFIG_TEXT_BASE=0x84000000 |
| CONFIG_NR_DRAM_BANKS=3 |
| CONFIG_ENV_SIZE=0x2000 |
| CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld4-ref" |
| CONFIG_SPL_TEXT_BASE=0x00040000 |
| CONFIG_SPL_MMC=y |
| CONFIG_SPL_SERIAL=y |
| CONFIG_SPL=y |
| CONFIG_MICRO_SUPPORT_CARD=y |
| CONFIG_SYS_LOAD_ADDR=0x85000000 |
| CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y |
| CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x84000000 |
| CONFIG_TIMESTAMP=y |
| # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set |
| CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot" |
| CONFIG_USE_PREBOOT=y |
| CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot" |
| CONFIG_LOGLEVEL=6 |
| CONFIG_SPL_MAX_SIZE=0x10000 |
| CONFIG_SPL_PAD_TO=0x20000 |
| CONFIG_SPL_BSS_MAX_SIZE=0x2000 |
| # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set |
| CONFIG_SPL_STACK=0x100000 |
| CONFIG_SPL_NAND_SUPPORT=y |
| CONFIG_SPL_NOR_SUPPORT=y |
| CONFIG_SPL_TARGET="u-boot-with-spl.bin" |
| CONFIG_CMD_CONFIG=y |
| CONFIG_SYS_BOOTM_LEN=0x2000000 |
| # CONFIG_CMD_XIMG is not set |
| CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_GPT=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_USB=y |
| CONFIG_CMD_TFTPPUT=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_TIME=y |
| # CONFIG_CMD_SLEEP is not set |
| CONFIG_CMD_MTDPARTS=y |
| CONFIG_MTDIDS_DEFAULT="nand0=uniphier-nand.0" |
| CONFIG_MTDPARTS_DEFAULT="mtdparts=uniphier-nand.0:1m(firmware),-(UBI)" |
| CONFIG_CMD_UBI=y |
| # CONFIG_SPL_DOS_PARTITION is not set |
| # CONFIG_SPL_EFI_PARTITION is not set |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_USE_BOOTFILE=y |
| CONFIG_BOOTFILE="zImage" |
| CONFIG_NET_RANDOM_ETHADDR=y |
| CONFIG_GPIO_UNIPHIER=y |
| CONFIG_MISC=y |
| CONFIG_I2C_EEPROM=y |
| CONFIG_SUPPORT_EMMC_BOOT=y |
| CONFIG_MMC_UNIPHIER=y |
| CONFIG_MTD=y |
| CONFIG_MTD_RAW_NAND=y |
| CONFIG_NAND_DENALI_DT=y |
| CONFIG_SYS_NAND_ONFI_DETECTION=y |
| CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y |
| CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 |
| CONFIG_SPL_NAND_DENALI=y |
| CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 |
| CONFIG_SMC911X=y |
| CONFIG_SMC911X_32_BIT=y |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_EHCI_GENERIC=y |
| CONFIG_PANIC_HANG=y |
| CONFIG_FDT_FIXUP_PARTITIONS=y |