| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2015 Samsung Electronics |
| * Przemyslaw Marczak <p.marczak@samsung.com> |
| */ |
| #include <common.h> |
| #include <errno.h> |
| #include <dm.h> |
| #include <adc.h> |
| #include <asm/arch/adc.h> |
| |
| struct exynos_adc_priv { |
| int active_channel; |
| struct exynos_adc_v2 *regs; |
| }; |
| |
| int exynos_adc_channel_data(struct udevice *dev, int channel, |
| unsigned int *data) |
| { |
| struct exynos_adc_priv *priv = dev_get_priv(dev); |
| struct exynos_adc_v2 *regs = priv->regs; |
| |
| if (channel != priv->active_channel) { |
| pr_err("Requested channel is not active!"); |
| return -EINVAL; |
| } |
| |
| if (ADC_V2_GET_STATUS_FLAG(readl(®s->status)) != FLAG_CONV_END) |
| return -EBUSY; |
| |
| *data = readl(®s->dat) & ADC_V2_DAT_MASK; |
| |
| return 0; |
| } |
| |
| int exynos_adc_start_channel(struct udevice *dev, int channel) |
| { |
| struct exynos_adc_priv *priv = dev_get_priv(dev); |
| struct exynos_adc_v2 *regs = priv->regs; |
| unsigned int cfg; |
| |
| /* Choose channel */ |
| cfg = readl(®s->con2); |
| cfg &= ~ADC_V2_CON2_CHAN_SEL_MASK; |
| cfg |= ADC_V2_CON2_CHAN_SEL(channel); |
| writel(cfg, ®s->con2); |
| |
| /* Start conversion */ |
| cfg = readl(®s->con1); |
| writel(cfg | ADC_V2_CON1_STC_EN, ®s->con1); |
| |
| priv->active_channel = channel; |
| |
| return 0; |
| } |
| |
| int exynos_adc_stop(struct udevice *dev) |
| { |
| struct exynos_adc_priv *priv = dev_get_priv(dev); |
| struct exynos_adc_v2 *regs = priv->regs; |
| unsigned int cfg; |
| |
| /* Stop conversion */ |
| cfg = readl(®s->con1); |
| cfg &= ~ADC_V2_CON1_STC_EN; |
| |
| writel(cfg, ®s->con1); |
| |
| priv->active_channel = -1; |
| |
| return 0; |
| } |
| |
| int exynos_adc_probe(struct udevice *dev) |
| { |
| struct exynos_adc_priv *priv = dev_get_priv(dev); |
| struct exynos_adc_v2 *regs = priv->regs; |
| unsigned int cfg; |
| |
| /* Check HW version */ |
| if (readl(®s->version) != ADC_V2_VERSION) { |
| pr_err("This driver supports only ADC v2!"); |
| return -ENXIO; |
| } |
| |
| /* ADC Reset */ |
| writel(ADC_V2_CON1_SOFT_RESET, ®s->con1); |
| |
| /* Disable INT - will read status only */ |
| writel(0x0, ®s->int_en); |
| |
| /* CON2 - set conversion parameters */ |
| cfg = ADC_V2_CON2_C_TIME(3); /* Conversion times: (1 << 3) = 8 */ |
| cfg |= ADC_V2_CON2_OSEL(OSEL_BINARY); |
| cfg |= ADC_V2_CON2_ESEL(ESEL_ADC_EVAL_TIME_20CLK); |
| cfg |= ADC_V2_CON2_HIGHF(HIGHF_CONV_RATE_600KSPS); |
| writel(cfg, ®s->con2); |
| |
| priv->active_channel = -1; |
| |
| return 0; |
| } |
| |
| int exynos_adc_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| struct exynos_adc_priv *priv = dev_get_priv(dev); |
| |
| priv->regs = dev_read_addr_ptr(dev); |
| if (priv->regs == (struct exynos_adc_v2 *)FDT_ADDR_T_NONE) { |
| pr_err("Dev: %s - can't get address!", dev->name); |
| return -ENODATA; |
| } |
| |
| uc_pdata->data_mask = ADC_V2_DAT_MASK; |
| uc_pdata->data_format = ADC_DATA_FORMAT_BIN; |
| uc_pdata->data_timeout_us = ADC_V2_CONV_TIMEOUT_US; |
| |
| /* Mask available channel bits: [0:9] */ |
| uc_pdata->channel_mask = (2 << ADC_V2_MAX_CHANNEL) - 1; |
| |
| return 0; |
| } |
| |
| static const struct adc_ops exynos_adc_ops = { |
| .start_channel = exynos_adc_start_channel, |
| .channel_data = exynos_adc_channel_data, |
| .stop = exynos_adc_stop, |
| }; |
| |
| static const struct udevice_id exynos_adc_ids[] = { |
| { .compatible = "samsung,exynos-adc-v2" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(exynos_adc) = { |
| .name = "exynos-adc", |
| .id = UCLASS_ADC, |
| .of_match = exynos_adc_ids, |
| .ops = &exynos_adc_ops, |
| .probe = exynos_adc_probe, |
| .ofdata_to_platdata = exynos_adc_ofdata_to_platdata, |
| .priv_auto_alloc_size = sizeof(struct exynos_adc_priv), |
| }; |