clk: ti: add support for clkctrl clocks

Until now the clkctrl clocks have been enabled/disabled through platform
routines. Thanks to this patch they can be enabled and configured directly
by the probed devices that need to use them.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/clock/ti-clkctrl.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>
diff --git a/drivers/clk/ti/Kconfig b/drivers/clk/ti/Kconfig
index 30959a3..9e257a2 100644
--- a/drivers/clk/ti/Kconfig
+++ b/drivers/clk/ti/Kconfig
@@ -10,6 +10,12 @@
 	  This enables the DPLL clock drivers support on AM33XX SoCs. The DPLL
 	  provides all interface clocks and functional clocks to the processor.
 
+config CLK_TI_CTRL
+	bool "TI OMAP4 clock controller"
+	depends on CLK && OF_CONTROL
+	help
+	  This enables the clock controller driver support on TI's SoCs.
+
 config CLK_TI_DIVIDER
 	bool "TI divider clock driver"
 	depends on CLK && OF_CONTROL && CLK_CCF
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index f8aa735..ed45f18 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_ARCH_OMAP2PLUS) += clk.o
 
 obj-$(CONFIG_CLK_TI_AM3_DPLL) += clk-am3-dpll.o clk-am3-dpll-x2.o
+obj-$(CONFIG_CLK_TI_CTRL) += clk-ctrl.o
 obj-$(CONFIG_CLK_TI_DIVIDER) += clk-divider.o
 obj-$(CONFIG_CLK_TI_GATE) += clk-gate.o
 obj-$(CONFIG_CLK_TI_MUX) += clk-mux.o
diff --git a/drivers/clk/ti/clk-ctrl.c b/drivers/clk/ti/clk-ctrl.c
new file mode 100644
index 0000000..940e8d6
--- /dev/null
+++ b/drivers/clk/ti/clk-ctrl.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * OMAP clock controller support
+ *
+ * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <clk-uclass.h>
+#include <asm/arch-am33xx/clock.h>
+
+struct clk_ti_ctrl_offs {
+	fdt_addr_t start;
+	fdt_size_t end;
+};
+
+struct clk_ti_ctrl_priv {
+	int offs_num;
+	struct clk_ti_ctrl_offs *offs;
+};
+
+static int clk_ti_ctrl_check_offs(struct clk *clk, fdt_addr_t offs)
+{
+	struct clk_ti_ctrl_priv *priv = dev_get_priv(clk->dev);
+	int i;
+
+	for (i = 0; i < priv->offs_num; i++) {
+		if (offs >= priv->offs[i].start && offs <= priv->offs[i].end)
+			return 0;
+	}
+
+	return -EFAULT;
+}
+
+static int clk_ti_ctrl_disable(struct clk *clk)
+{
+	struct clk_ti_ctrl_priv *priv = dev_get_priv(clk->dev);
+	u32 *clk_modules[2] = { };
+	fdt_addr_t offs;
+	int err;
+
+	offs = priv->offs[0].start + clk->id;
+	err = clk_ti_ctrl_check_offs(clk, offs);
+	if (err) {
+		dev_err(clk->dev, "invalid offset: 0x%lx\n", offs);
+		return err;
+	}
+
+	clk_modules[0] = (u32 *)(offs);
+	dev_dbg(clk->dev, "module address=%p\n", clk_modules[0]);
+	do_disable_clocks(NULL, clk_modules, 1);
+	return 0;
+}
+
+static int clk_ti_ctrl_enable(struct clk *clk)
+{
+	struct clk_ti_ctrl_priv *priv = dev_get_priv(clk->dev);
+	u32 *clk_modules[2] = { };
+	fdt_addr_t offs;
+	int err;
+
+	offs = priv->offs[0].start + clk->id;
+	err = clk_ti_ctrl_check_offs(clk, offs);
+	if (err) {
+		dev_err(clk->dev, "invalid offset: 0x%lx\n", offs);
+		return err;
+	}
+
+	clk_modules[0] = (u32 *)(offs);
+	dev_dbg(clk->dev, "module address=%p\n", clk_modules[0]);
+	do_enable_clocks(NULL, clk_modules, 1);
+	return 0;
+}
+
+static ulong clk_ti_ctrl_get_rate(struct clk *clk)
+{
+	return 0;
+}
+
+static int clk_ti_ctrl_of_xlate(struct clk *clk,
+				struct ofnode_phandle_args *args)
+{
+	if (args->args_count != 2) {
+		dev_err(clk->dev, "invaild args_count: %d\n", args->args_count);
+		return -EINVAL;
+	}
+
+	if (args->args_count)
+		clk->id = args->args[0];
+	else
+		clk->id = 0;
+
+	dev_dbg(clk->dev, "name=%s, id=%ld\n", clk->dev->name, clk->id);
+	return 0;
+}
+
+static int clk_ti_ctrl_of_to_plat(struct udevice *dev)
+{
+	struct clk_ti_ctrl_priv *priv = dev_get_priv(dev);
+	fdt_size_t fdt_size;
+	int i, size;
+
+	size = dev_read_size(dev, "reg");
+	if (size < 0) {
+		dev_err(dev, "failed to get 'reg' size\n");
+		return size;
+	}
+
+	priv->offs_num = size / 2 / sizeof(u32);
+	dev_dbg(dev, "size=%d, regs_num=%d\n", size, priv->offs_num);
+
+	priv->offs = kmalloc_array(priv->offs_num, sizeof(*priv->offs),
+				   GFP_KERNEL);
+	if (!priv->offs)
+		return -ENOMEM;
+
+	for (i = 0; i < priv->offs_num; i++) {
+		priv->offs[i].start =
+			dev_read_addr_size_index(dev, i, &fdt_size);
+		if (priv->offs[i].start == FDT_ADDR_T_NONE) {
+			dev_err(dev, "failed to get offset %d\n", i);
+			return -EINVAL;
+		}
+
+		priv->offs[i].end = priv->offs[i].start + fdt_size;
+		dev_dbg(dev, "start=0x%08lx, end=0x%08lx\n",
+			priv->offs[i].start, priv->offs[i].end);
+	}
+
+	return 0;
+}
+
+static struct clk_ops clk_ti_ctrl_ops = {
+	.of_xlate = clk_ti_ctrl_of_xlate,
+	.enable = clk_ti_ctrl_enable,
+	.disable = clk_ti_ctrl_disable,
+	.get_rate = clk_ti_ctrl_get_rate,
+};
+
+static const struct udevice_id clk_ti_ctrl_ids[] = {
+	{.compatible = "ti,clkctrl"},
+	{},
+};
+
+U_BOOT_DRIVER(clk_ti_ctrl) = {
+	.name = "ti_ctrl_clk",
+	.id = UCLASS_CLK,
+	.of_match = clk_ti_ctrl_ids,
+	.ofdata_to_platdata = clk_ti_ctrl_of_to_plat,
+	.ops = &clk_ti_ctrl_ops,
+	.priv_auto = sizeof(struct clk_ti_ctrl_priv),
+};