arch/arm/dts/k3-am654-base-board-u-boot.dtsi

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
 */

#include <dt-bindings/pinctrl/k3-am65.h>
#include <dt-bindings/dma/k3-udma.h>

/ {
	chosen {
		stdout-path = "serial2:115200n8";
	};

	aliases {
		serial2 = &main_uart0;
	};
};

&cbass_main{
	u-boot,dm-spl;

	main_pmx0: pinmux@11c000 {
		compatible = "pinctrl-single";
		reg = <0x0 0x11c000 0x0 0x2e4>;
		#pinctrl-cells = <1>;
		pinctrl-single,register-width = <32>;
		pinctrl-single,function-mask = <0xffffffff>;
	};

	main_pmx1: pinmux@11c2e8 {
		compatible = "pinctrl-single";
		reg = <0x0 0x11c2e8 0x0 0x24>;
		#pinctrl-cells = <1>;
		pinctrl-single,register-width = <32>;
		pinctrl-single,function-mask = <0xffffffff>;
	};

	sdhci0: sdhci@04F80000 {
		compatible = "arasan,sdhci-5.1";
		reg = <0x0 0x4F80000 0x0 0x1000>,
		      <0x0 0x4F90000 0x0 0x400>;
		clocks = <&k3_clks 47 1>;
		power-domains = <&k3_pds 47>;
		max-frequency = <25000000>;
	};

	sdhci1: sdhci@04FA0000 {
		compatible = "arasan,sdhci-5.1";
		reg = <0x0 0x4FA0000 0x0 0x1000>,
		      <0x0 0x4FB0000 0x0 0x400>;
		clocks = <&k3_clks 48 1>;
		power-domains = <&k3_pds 48>;
		max-frequency = <25000000>;
	};

};

&cbass_mcu {
	u-boot,dm-spl;
	wkup_pmx0: pinmux@4301c000 {
		compatible = "pinctrl-single";
		reg = <0x0 0x4301c000 0x0 0x118>;
		#pinctrl-cells = <1>;
		pinctrl-single,register-width = <32>;
		pinctrl-single,function-mask = <0xffffffff>;
	};

	navss_mcu: navss-mcu {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		ti,sci-dev-id = <119>;

		mcu_ringacc: ringacc@2b800000 {
			compatible = "ti,am654-navss-ringacc";
			reg =	<0x0 0x2b800000 0x0 0x400000>,
				<0x0 0x2b000000 0x0 0x400000>,
				<0x0 0x28590000 0x0 0x100>,
				<0x0 0x2a500000 0x0 0x40000>;
			reg-names = "rt", "fifos",
				    "proxy_gcfg", "proxy_target";
			ti,num-rings = <286>;
			ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
			ti,dma-ring-reset-quirk;
			ti,sci = <&dmsc>;
			ti,sci-dev-id = <195>;
		};

		mcu_udmap: udmap@285c0000 {
			compatible = "ti,k3-navss-udmap";
			reg =	<0x0 0x285c0000 0x0 0x100>,
				<0x0 0x2a800000 0x0 0x40000>,
				<0x0 0x2aa00000 0x0 0x40000>;
			reg-names = "gcfg", "rchanrt", "tchanrt";
			#dma-cells = <3>;

			ti,ringacc = <&mcu_ringacc>;
			ti,psil-base = <0x6000>;

			ti,sci = <&dmsc>;
			ti,sci-dev-id = <194>;

			ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
						<0x2>; /* TX_CHAN */
			ti,sci-rm-range-rchan = <0x3>, /* RX_HCHAN */
						<0x4>; /* RX_CHAN */
			ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */
			dma-coherent;
		};
	};
};

&cbass_wakeup {
	u-boot,dm-spl;
};

&secure_proxy_main {
	u-boot,dm-spl;
};

&dmsc {
	u-boot,dm-spl;
	k3_sysreset: sysreset-controller {
		compatible = "ti,sci-sysreset";
		u-boot,dm-spl;
	};
};

&k3_pds {
	u-boot,dm-spl;
};

&k3_clks {
	u-boot,dm-spl;
};

&k3_reset {
	u-boot,dm-spl;
};

&main_pmx0 {
	u-boot,dm-spl;
	main_uart0_pins_default: main_uart0_pins_default {
		pinctrl-single,pins = <
			AM65X_IOPAD(0x01e4, PIN_INPUT | MUX_MODE0)	/* (AF11) UART0_RXD */
			AM65X_IOPAD(0x01e8, PIN_OUTPUT | MUX_MODE0)	/* (AE11) UART0_TXD */
			AM65X_IOPAD(0x01ec, PIN_INPUT | MUX_MODE0)	/* (AG11) UART0_CTSn */
			AM65X_IOPAD(0x01f0, PIN_OUTPUT | MUX_MODE0)	/* (AD11) UART0_RTSn */
		>;
		u-boot,dm-spl;
	};

	main_mmc0_pins_default: main_mmc0_pins_default {
		pinctrl-single,pins = <
			AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* (B25) MMC0_CLK */
			AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP | MUX_MODE0) /* (B27) MMC0_CMD */
			AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* (A26) MMC0_DAT0 */
			AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP | MUX_MODE0) /* (E25) MMC0_DAT1 */
			AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C26) MMC0_DAT2 */
			AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP | MUX_MODE0) /* (A25) MMC0_DAT3 */
			AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP | MUX_MODE0) /* (E24) MMC0_DAT4 */
			AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP | MUX_MODE0) /* (A24) MMC0_DAT5 */
			AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP | MUX_MODE0) /* (B26) MMC0_DAT6 */
			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP | MUX_MODE0) /* (D25) MMC0_DAT7 */
			AM65X_IOPAD(0x01b0, PIN_INPUT | MUX_MODE0) /* (C25) MMC0_DS */
		>;
		u-boot,dm-spl;
	};

	main_mmc1_pins_default: main_mmc1_pins_default {
		pinctrl-single,pins = <
			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* (C27) MMC1_CLK */
			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP | MUX_MODE0) /* (C28) MMC1_CMD */
			AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP | MUX_MODE0) /* (D28) MMC1_DAT0 */
			AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP | MUX_MODE0) /* (E27) MMC1_DAT1 */
			AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP | MUX_MODE0) /* (D26) MMC1_DAT2 */
			AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP | MUX_MODE0) /* (D27) MMC1_DAT3 */
			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP | MUX_MODE0) /* (B24) MMC1_SDCD */
			AM65X_IOPAD(0x02e0, PIN_INPUT | MUX_MODE0) /* (C24) MMC1_SDWP */
		>;
		u-boot,dm-spl;
	};

};

&main_pmx1 {
	u-boot,dm-spl;
};

&main_uart0 {
	u-boot,dm-spl;
	pinctrl-names = "default";
	pinctrl-0 = <&main_uart0_pins_default>;
	status = "okay";
};

&sdhci0 {
	u-boot,dm-spl;
	status = "okay";
	non-removable;
	bus-width = <8>;
	pinctrl-names = "default";
	pinctrl-0 = <&main_mmc0_pins_default>;
};

&sdhci1 {
	u-boot,dm-spl;
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&main_mmc1_pins_default>;
	sdhci-caps-mask = <0x7 0x0>;
};