| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * AXP305 driver |
| * |
| * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec@siol.net> |
| * |
| * Based on axp221.c |
| * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com> |
| * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl> |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <errno.h> |
| #include <asm/arch/pmic_bus.h> |
| #include <axp_pmic.h> |
| |
| #define AXP305_DCDC4_1600MV_OFFSET 46 |
| |
| static u8 axp305_mvolt_to_cfg(int mvolt, int min, int max, int div) |
| { |
| if (mvolt < min) |
| mvolt = min; |
| else if (mvolt > max) |
| mvolt = max; |
| |
| return (mvolt - min) / div; |
| } |
| |
| int axp_set_dcdc4(unsigned int mvolt) |
| { |
| int ret; |
| u8 cfg; |
| |
| if (mvolt >= 1600) |
| cfg = AXP305_DCDC4_1600MV_OFFSET + |
| axp305_mvolt_to_cfg(mvolt, 1600, 3300, 100); |
| else |
| cfg = axp305_mvolt_to_cfg(mvolt, 600, 1500, 20); |
| |
| if (mvolt == 0) |
| return pmic_bus_clrbits(AXP305_OUTPUT_CTRL1, |
| AXP305_OUTPUT_CTRL1_DCDCD_EN); |
| |
| ret = pmic_bus_write(AXP305_DCDCD_VOLTAGE, cfg); |
| if (ret) |
| return ret; |
| |
| return pmic_bus_setbits(AXP305_OUTPUT_CTRL1, |
| AXP305_OUTPUT_CTRL1_DCDCD_EN); |
| } |
| |
| int axp_init(void) |
| { |
| u8 axp_chip_id; |
| int ret; |
| |
| ret = pmic_bus_init(); |
| if (ret) |
| return ret; |
| |
| ret = pmic_bus_read(AXP305_CHIP_VERSION, &axp_chip_id); |
| if (ret) |
| return ret; |
| |
| if ((axp_chip_id & AXP305_CHIP_VERSION_MASK) != 0x40) |
| return -ENODEV; |
| |
| return ret; |
| } |
| |
| #if !CONFIG_IS_ENABLED(ARM_PSCI_FW) && !IS_ENABLED(CONFIG_SYSRESET_CMD_POWEROFF) |
| int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| pmic_bus_write(AXP305_SHUTDOWN, AXP305_POWEROFF); |
| |
| /* infinite loop during shutdown */ |
| while (1) {} |
| |
| /* not reached */ |
| return 0; |
| } |
| #endif |