| if TARGET_MICROBLAZE_GENERIC |
| |
| config SYS_BOARD |
| default "microblaze-generic" |
| |
| config SYS_VENDOR |
| default "xilinx" |
| |
| config SYS_CONFIG_NAME |
| string "Board configuration name" |
| default "microblaze-generic" |
| help |
| This option contains information about board configuration name. |
| Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header |
| will be used for board configuration. |
| |
| config XILINX_MICROBLAZE0_USE_MSR_INSTR |
| int "USE_MSR_INSTR range (0:1)" |
| default 0 |
| |
| config XILINX_MICROBLAZE0_USE_PCMP_INSTR |
| int "USE_PCMP_INSTR range (0:1)" |
| default 0 |
| |
| config XILINX_MICROBLAZE0_USE_BARREL |
| int "USE_BARREL range (0:1)" |
| default 0 |
| |
| config XILINX_MICROBLAZE0_USE_DIV |
| int "USE_DIV range (0:1)" |
| default 0 |
| |
| config XILINX_MICROBLAZE0_USE_HW_MUL |
| int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" |
| default 0 |
| |
| config XILINX_MICROBLAZE0_HW_VER |
| string "Core version number" |
| default "7.10.d" |
| |
| config XILINX_MICROBLAZE0_FPGA_FAMILY |
| string "Targeted FPGA family" |
| default "virtex5" |
| help |
| This option contains info about the target FPGA architecture |
| (Zynq-7000, UltraScale+ Kintex, etc) that the MicroBlaze soft core is |
| implemented on. It corresponds to the C_FAMILY hdl parameter. |
| |
| config XILINX_MICROBLAZE0_USR_EXCEP |
| bool "MicroBlaze user exception support" |
| default y |
| help |
| Enable this option in order to install the user exception handler |
| (_exception_handler routine from arch/microblaze/cpu/exception.c) in |
| the exception vector table. The user exception vector is located at |
| C_BASE_VECTORS + 0x8 address. |
| |
| config XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP |
| bool "MicroBlaze delay slot exception support" |
| default y |
| help |
| Enable this option if the MicroBlaze processor supports exceptions |
| caused by delay slot instructions (processor version >= v5.00). When |
| enabled, the hw exception handler will print a message indicating |
| whether the exception was triggered by a delay slot instruction. |
| |
| config XILINX_MICROBLAZE0_VECTOR_BASE_ADDR |
| hex "Location of MicroBlaze vectors" |
| default 0x0 |
| help |
| Memory address location of the exception vector table. It is |
| configurable via the C_BASE_VECTORS hdl parameter. |
| |
| config XILINX_MICROBLAZE0_USE_WDC |
| bool "MicroBlaze wdc instruction support" |
| default y |
| help |
| Enable this option if the MicroBlaze processor is configured with |
| support for the "wdc" (Write to Data Cache) instruction. |
| |
| config SPL_XILINX_MICROBLAZE0_USE_WDC |
| bool |
| default XILINX_MICROBLAZE0_USE_WDC |
| |
| config XILINX_MICROBLAZE0_USE_WIC |
| bool "MicroBlaze wic instruction support" |
| default y |
| help |
| Enable this option if the MicroBlaze processor is configured with |
| support for the "wic" (Write to Instruction Cache) instruction. |
| |
| config SPL_XILINX_MICROBLAZE0_USE_WIC |
| bool |
| default XILINX_MICROBLAZE0_USE_WIC |
| |
| config XILINX_MICROBLAZE0_DCACHE_SIZE |
| int "Default data cache size" |
| default 32768 |
| help |
| This fallback size will be used when no dcache info can be found in |
| the device tree, or when the data cache is flushed very early in the |
| boot process, before device tree is available. |
| |
| config XILINX_MICROBLAZE0_ICACHE_SIZE |
| int "Default instruction cache size" |
| default 32768 |
| help |
| This fallback size will be used when no icache info can be found in |
| the device tree, or when the instruction cache is flushed very early |
| in the boot process, before device tree is available. |
| |
| config XILINX_MICROBLAZE0_PVR |
| bool "MicroBlaze PVR support" |
| help |
| Enables helper functions and macros needed to manipulate PVR |
| (Processor Version Register) data. Currently, only the microblaze |
| UCLASS_CPU driver makes use of this feature to retrieve CPU info at |
| runtime. |
| |
| endif |