| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2016-2017 Intel Corporation |
| */ |
| |
| #include <altera.h> |
| #include <common.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <miiphy.h> |
| #include <netdev.h> |
| #include <ns16550.h> |
| #include <watchdog.h> |
| #include <asm/arch/misc.h> |
| #include <asm/arch/pinmux.h> |
| #include <asm/arch/reset_manager.h> |
| #include <asm/arch/reset_manager_arria10.h> |
| #include <asm/arch/sdram_arria10.h> |
| #include <asm/arch/system_manager.h> |
| #include <asm/arch/nic301.h> |
| #include <asm/io.h> |
| #include <asm/pl310.h> |
| |
| #define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 0x08 |
| #define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 0x58 |
| #define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3 0x68 |
| #define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 0x18 |
| #define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 0x78 |
| #define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3 0x98 |
| |
| /* |
| * FPGA programming support for SoC FPGA Arria 10 |
| */ |
| static Altera_desc altera_fpga[] = { |
| { |
| /* Family */ |
| Altera_SoCFPGA, |
| /* Interface type */ |
| fast_passive_parallel, |
| /* No limitation as additional data will be ignored */ |
| -1, |
| /* No device function table */ |
| NULL, |
| /* Base interface address specified in driver */ |
| NULL, |
| /* No cookie implementation */ |
| 0 |
| }, |
| }; |
| |
| #if defined(CONFIG_SPL_BUILD) |
| static struct pl310_regs *const pl310 = |
| (struct pl310_regs *)CONFIG_SYS_PL310_BASE; |
| static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base = |
| (void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS; |
| |
| /* |
| + * This function initializes security policies to be consistent across |
| + * all logic units in the Arria 10. |
| + * |
| + * The idea is to set all security policies to be normal, nonsecure |
| + * for all units. |
| + */ |
| void socfpga_init_security_policies(void) |
| { |
| /* Put OCRAM in non-secure */ |
| writel(0x003f0000, &noc_fw_ocram_base->region0); |
| writel(0x1, &noc_fw_ocram_base->enable); |
| |
| /* Put DDR in non-secure */ |
| writel(0xffff0000, SOCFPGA_SDR_FIREWALL_L3_ADDRESS + 0xc); |
| writel(0x1, SOCFPGA_SDR_FIREWALL_L3_ADDRESS); |
| |
| /* Enable priviledged and non-priviledged access to L4 peripherals */ |
| writel(~0, SOCFPGA_NOC_L4_PRIV_FLT_OFST); |
| |
| /* Enable secure and non-secure transactions to bridges */ |
| writel(~0, SOCFPGA_NOC_FW_H2F_SCR_OFST); |
| writel(~0, SOCFPGA_NOC_FW_H2F_SCR_OFST + 4); |
| |
| writel(0x0007FFFF, |
| socfpga_get_sysmgr_addr() + SYSMGR_A10_ECC_INTMASK_SET); |
| } |
| |
| void socfpga_sdram_remap_zero(void) |
| { |
| /* Configure the L2 controller to make SDRAM start at 0 */ |
| writel(0x1, &pl310->pl310_addr_filter_start); |
| } |
| #endif |
| |
| int arch_early_init_r(void) |
| { |
| /* Add device descriptor to FPGA device table */ |
| socfpga_fpga_add(&altera_fpga[0]); |
| |
| return 0; |
| } |
| |
| /* |
| * Print CPU information |
| */ |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| const u32 bootinfo = readl(socfpga_get_sysmgr_addr() + |
| SYSMGR_A10_BOOTINFO); |
| const u32 bsel = SYSMGR_GET_BOOTINFO_BSEL(bootinfo); |
| |
| puts("CPU: Altera SoCFPGA Arria 10\n"); |
| |
| printf("BOOT: %s\n", bsel_str[bsel].name); |
| return 0; |
| } |
| #endif |
| |
| void do_bridge_reset(int enable, unsigned int mask) |
| { |
| if (enable) |
| socfpga_reset_deassert_bridges_handoff(); |
| else |
| socfpga_bridges_reset(); |
| } |