common/cmd_eeprom.c - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2000, 2001
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  *
  */

 #include <common.h>
 #include <config.h>
 #include <command.h>
 #include <i2c.h>

 #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) || defined(CFG_ENV_IS_IN_EEPROM)

 extern void eeprom_init  (void);
 extern int  eeprom_read  (unsigned dev_addr, unsigned offset,
 			  uchar *buffer, unsigned cnt);
 extern int  eeprom_write (unsigned dev_addr, unsigned offset,
 			  uchar *buffer, unsigned cnt);
 #endif


 #if defined(CFG_EEPROM_X40430)
 	/* Maximum number of times to poll for acknowledge after write */
 #define MAX_ACKNOWLEDGE_POLLS	10
 #endif

 /* ------------------------------------------------------------------------- */

 #if (CONFIG_COMMANDS & CFG_CMD_EEPROM)
 int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	const char *const fmt =
 		"\nEEPROM @0x%lX %s: addr %08lx  off %04lx  count %ld ... ";

 #if defined(CFG_I2C_MULTI_EEPROMS)
 	if (argc == 6) {
 		ulong dev_addr = simple_strtoul (argv[2], NULL, 16);
 		ulong addr = simple_strtoul (argv[3], NULL, 16);
 		ulong off  = simple_strtoul (argv[4], NULL, 16);
 		ulong cnt  = simple_strtoul (argv[5], NULL, 16);
 #else
 	if (argc == 5) {
 		ulong dev_addr = CFG_DEF_EEPROM_ADDR;
 		ulong addr = simple_strtoul (argv[2], NULL, 16);
 		ulong off  = simple_strtoul (argv[3], NULL, 16);
 		ulong cnt  = simple_strtoul (argv[4], NULL, 16);
 #endif /* CFG_I2C_MULTI_EEPROMS */

 # ifndef CONFIG_SPI
 		eeprom_init ();
 # endif /* !CONFIG_SPI */

 		if (strcmp (argv[1], "read") == 0) {
 			int rcode;

 			printf (fmt, dev_addr, argv[1], addr, off, cnt);

 			rcode = eeprom_read (dev_addr, off, (uchar *) addr, cnt);

 			printf ("done\n");
 			return rcode;
 		} else if (strcmp (argv[1], "write") == 0) {
 			int rcode;

 			printf (fmt, dev_addr, argv[1], addr, off, cnt);

 			rcode = eeprom_write (dev_addr, off, (uchar *) addr, cnt);

 			printf ("done\n");
 			return rcode;
 		}
 	}

 	printf ("Usage:\n%s\n", cmdtp->usage);
 	return 1;
 }
 #endif	/* CFG_CMD_EEPROM */

 /*-----------------------------------------------------------------------
  *
  * for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
  *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
  *
  * for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
  *   0x00000nxx for EEPROM address selectors and page number at n.
  */

 #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) || defined(CFG_ENV_IS_IN_EEPROM)

 #ifndef CONFIG_SPI
 #if !defined(CFG_I2C_EEPROM_ADDR_LEN) || CFG_I2C_EEPROM_ADDR_LEN < 1 || CFG_I2C_EEPROM_ADDR_LEN > 2
 #error CFG_I2C_EEPROM_ADDR_LEN must be 1 or 2
 #endif
 #endif

 int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
 {
 	unsigned end = offset + cnt;
 	unsigned blk_off;
 	int rcode = 0;

 	/* Read data until done or would cross a page boundary.
 	 * We must write the address again when changing pages
 	 * because the next page may be in a different device.
 	 */
 	while (offset < end) {
 		unsigned alen, len, maxlen;
 #if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
 		uchar addr[2];

 		blk_off = offset & 0xFF;	/* block offset */

 		addr[0] = offset >> 8;		/* block number */
 		addr[1] = blk_off;		/* block offset */
 		alen	= 2;
 #else
 		uchar addr[3];

 		blk_off = offset & 0xFF;	/* block offset */

 		addr[0] = offset >> 16;		/* block number */
 		addr[1] = offset >>  8;		/* upper address octet */
 		addr[2] = blk_off;		/* lower address octet */
 		alen	= 3;
 #endif	/* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */

 		addr[0] |= dev_addr;		/* insert device address */

 		maxlen = 0x100 - blk_off;
 		if (maxlen > I2C_RXTX_LEN)
 			maxlen = I2C_RXTX_LEN;
 		len    = end - offset;
 		if (len > maxlen)
 			len = maxlen;
 #ifdef CONFIG_SPI
 		spi_read (addr, alen, buffer, len);
 #else
 		if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0)
 			rcode = 1;
 #endif
 		buffer += len;
 		offset += len;
 	}
 	return rcode;
 }

 /*-----------------------------------------------------------------------
  *
  * for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
  *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
  *
  * for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
  *   0x00000nxx for EEPROM address selectors and page number at n.
  */

 int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
 {
 	unsigned end = offset + cnt;
 	unsigned blk_off;
 	int rcode = 0;

 #if defined(CFG_EEPROM_X40430)
 	uchar	contr_r_addr[2];
 	uchar	addr_void[2];
 	uchar	contr_reg[2];
 	uchar	ctrl_reg_v;
 	int	i;
 #endif

 	/* Write data until done or would cross a write page boundary.
 	 * We must write the address again when changing pages
 	 * because the address counter only increments within a page.
 	 */

 	while (offset < end) {
 		unsigned alen, len, maxlen;
 #if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
 		uchar addr[2];

 		blk_off = offset & 0xFF;	/* block offset */

 		addr[0] = offset >> 8;		/* block number */
 		addr[1] = blk_off;		/* block offset */
 		alen	= 2;
 #else
 		uchar addr[3];

 		blk_off = offset & 0xFF;	/* block offset */

 		addr[0] = offset >> 16;		/* block number */
 		addr[1] = offset >>  8;		/* upper address octet */
 		addr[2] = blk_off;		/* lower address octet */
 		alen	= 3;
 #endif	/* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */

 		addr[0] |= dev_addr;		/* insert device address */

 #if defined(CFG_EEPROM_PAGE_WRITE_BITS)

 #define	EEPROM_PAGE_SIZE	(1 << CFG_EEPROM_PAGE_WRITE_BITS)
 #define	EEPROM_PAGE_OFFSET(x)	((x) & (EEPROM_PAGE_SIZE - 1))

 		maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
 #else
 		maxlen = 0x100 - blk_off;
 #endif
 		if (maxlen > I2C_RXTX_LEN)
 			maxlen = I2C_RXTX_LEN;

 		len = end - offset;
 		if (len > maxlen)
 			len = maxlen;
 #ifdef CONFIG_SPI
 		spi_write (addr, alen, buffer, len);
 #else
 #if defined(CFG_EEPROM_X40430)
 		/* Get the value of the control register.
 		 * Set current address (internal pointer in the x40430)
 		 * to 0x1ff.
 		 */
 		contr_r_addr[0] = 9;
 		contr_r_addr[1] = 0xff;
 		addr_void[0]    = 0;
 		addr_void[1]    = addr[1];
 #ifdef CFG_I2C_EEPROM_ADDR
 		contr_r_addr[0] |= CFG_I2C_EEPROM_ADDR;
 		addr_void[0]    |= CFG_I2C_EEPROM_ADDR;
 #endif
 		contr_reg[0] = 0xff;
 		if (i2c_read (contr_r_addr[0], contr_r_addr[1], 1, contr_reg, 1) != 0) {
 			rcode = 1;
 		}
 		ctrl_reg_v = contr_reg[0];

 		/* Are any of the eeprom blocks write protected?
 		 */
 		if (ctrl_reg_v & 0x18) {
 			ctrl_reg_v &= ~0x18;   /* reset block protect bits  */
 			ctrl_reg_v |=  0x02;   /* set write enable latch    */
 			ctrl_reg_v &= ~0x04;   /* clear RWEL                */

 			/* Set write enable latch.
 			 */
 			contr_reg[0] = 0x02;
 			if (i2c_write (contr_r_addr[0], 0xff, 1, contr_reg, 1) != 0) {
 				rcode = 1;
 			}

 			/* Set register write enable latch.
 			 */
 			contr_reg[0] = 0x06;
 			if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
 				rcode = 1;
 			}

 			/* Modify ctrl register.
 			 */
 			contr_reg[0] = ctrl_reg_v;
 			if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
 				rcode = 1;
 			}

 			/* The write (above) is an operation on NV memory.
 			 * These can take some time (~5ms), and the device
 			 * will not respond to further I2C messages till
 			 * it's completed the write.
 			 * So poll device for an I2C acknowledge.
 			 * When we get one we know we can continue with other
 			 * operations.
 			 */
 			contr_reg[0] = 0;
 			for (i = 0; i < MAX_ACKNOWLEDGE_POLLS; i++) {
 				if (i2c_read (addr_void[0], addr_void[1], 1, contr_reg, 1) == 1)
 					break;	/* got ack */
 #if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
 				udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 			}
 			if (i == MAX_ACKNOWLEDGE_POLLS) {
 				printf("EEPROM poll acknowledge failed\n");
 				rcode = 1;
 			}
 		}

 		/* Is the write enable latch on?.
 		 */
 		else if (!(ctrl_reg_v & 0x02)) {
 			/* Set write enable latch.
 			 */
 			contr_reg[0] = 0x02;
 			if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
 			       rcode = 1;
 			}
 		}
 		/* Write is enabled ... now write eeprom value.
 		 */
 #endif
 		if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0)
 			rcode = 1;

 #endif
 		buffer += len;
 		offset += len;

 #if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
 		udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 	}
 	return rcode;
 }

 /*-----------------------------------------------------------------------
  * Set default values
  */
 #ifndef	CFG_I2C_SPEED
 #define	CFG_I2C_SPEED	50000
 #endif

 #ifndef	CFG_I2C_SLAVE
 #define	CFG_I2C_SLAVE	0xFE
 #endif

 void eeprom_init  (void)
 {
 #if defined(CONFIG_SPI)
 	spi_init_f ();
 #endif
 #if defined(CONFIG_HARD_I2C) || \
     defined(CONFIG_SOFT_I2C)
 	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
 #endif
 }
 /*-----------------------------------------------------------------------
  */
 #endif	/* CFG_CMD_EEPROM */
	/*
	* (C) Copyright 2000, 2001
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*
	*/

	#include <common.h>
	#include <config.h>
	#include <command.h>
	#include <i2c.h>

	#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) \|\| defined(CFG_ENV_IS_IN_EEPROM)

	extern void eeprom_init (void);
	extern int eeprom_read (unsigned dev_addr, unsigned offset,
	uchar *buffer, unsigned cnt);
	extern int eeprom_write (unsigned dev_addr, unsigned offset,
	uchar *buffer, unsigned cnt);
	#endif


	#if defined(CFG_EEPROM_X40430)
	/* Maximum number of times to poll for acknowledge after write */
	#define MAX_ACKNOWLEDGE_POLLS 10
	#endif

	/* ------------------------------------------------------------------------- */

	#if (CONFIG_COMMANDS & CFG_CMD_EEPROM)
	int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
	{
	const char *const fmt =
	"\nEEPROM @0x%lX %s: addr %08lx off %04lx count %ld ... ";

	#if defined(CFG_I2C_MULTI_EEPROMS)
	if (argc == 6) {
	ulong dev_addr = simple_strtoul (argv[2], NULL, 16);
	ulong addr = simple_strtoul (argv[3], NULL, 16);
	ulong off = simple_strtoul (argv[4], NULL, 16);
	ulong cnt = simple_strtoul (argv[5], NULL, 16);
	#else
	if (argc == 5) {
	ulong dev_addr = CFG_DEF_EEPROM_ADDR;
	ulong addr = simple_strtoul (argv[2], NULL, 16);
	ulong off = simple_strtoul (argv[3], NULL, 16);
	ulong cnt = simple_strtoul (argv[4], NULL, 16);
	#endif /* CFG_I2C_MULTI_EEPROMS */

	# ifndef CONFIG_SPI
	eeprom_init ();
	# endif /* !CONFIG_SPI */

	if (strcmp (argv[1], "read") == 0) {
	int rcode;

	printf (fmt, dev_addr, argv[1], addr, off, cnt);

	rcode = eeprom_read (dev_addr, off, (uchar *) addr, cnt);

	printf ("done\n");
	return rcode;
	} else if (strcmp (argv[1], "write") == 0) {
	int rcode;

	printf (fmt, dev_addr, argv[1], addr, off, cnt);

	rcode = eeprom_write (dev_addr, off, (uchar *) addr, cnt);

	printf ("done\n");
	return rcode;
	}
	}

	printf ("Usage:\n%s\n", cmdtp->usage);
	return 1;
	}
	#endif /* CFG_CMD_EEPROM */

	/*-----------------------------------------------------------------------
	*
	* for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
	* 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
	*
	* for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
	* 0x00000nxx for EEPROM address selectors and page number at n.
	*/

	#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) \|\| defined(CFG_ENV_IS_IN_EEPROM)

	#ifndef CONFIG_SPI
	#if !defined(CFG_I2C_EEPROM_ADDR_LEN) \|\| CFG_I2C_EEPROM_ADDR_LEN < 1 \|\| CFG_I2C_EEPROM_ADDR_LEN > 2
	#error CFG_I2C_EEPROM_ADDR_LEN must be 1 or 2
	#endif
	#endif

	int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
	{
	unsigned end = offset + cnt;
	unsigned blk_off;
	int rcode = 0;

	/* Read data until done or would cross a page boundary.
	* We must write the address again when changing pages
	* because the next page may be in a different device.
	*/
	while (offset < end) {
	unsigned alen, len, maxlen;
	#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
	uchar addr[2];

	blk_off = offset & 0xFF; /* block offset */

	addr[0] = offset >> 8; /* block number */
	addr[1] = blk_off; /* block offset */
	alen = 2;
	#else
	uchar addr[3];

	blk_off = offset & 0xFF; /* block offset */

	addr[0] = offset >> 16; /* block number */
	addr[1] = offset >> 8; /* upper address octet */
	addr[2] = blk_off; /* lower address octet */
	alen = 3;
	#endif /* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */

	addr[0] \|= dev_addr; /* insert device address */

	maxlen = 0x100 - blk_off;
	if (maxlen > I2C_RXTX_LEN)
	maxlen = I2C_RXTX_LEN;
	len = end - offset;
	if (len > maxlen)
	len = maxlen;
	#ifdef CONFIG_SPI
	spi_read (addr, alen, buffer, len);
	#else
	if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0)
	rcode = 1;
	#endif
	buffer += len;
	offset += len;
	}
	return rcode;
	}

	/*-----------------------------------------------------------------------
	*
	* for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
	* 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
	*
	* for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
	* 0x00000nxx for EEPROM address selectors and page number at n.
	*/

	int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
	{
	unsigned end = offset + cnt;
	unsigned blk_off;
	int rcode = 0;

	#if defined(CFG_EEPROM_X40430)
	uchar contr_r_addr[2];
	uchar addr_void[2];
	uchar contr_reg[2];
	uchar ctrl_reg_v;
	int i;
	#endif

	/* Write data until done or would cross a write page boundary.
	* We must write the address again when changing pages
	* because the address counter only increments within a page.
	*/

	while (offset < end) {
	unsigned alen, len, maxlen;
	#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
	uchar addr[2];

	blk_off = offset & 0xFF; /* block offset */

	addr[0] = offset >> 8; /* block number */
	addr[1] = blk_off; /* block offset */
	alen = 2;
	#else
	uchar addr[3];

	blk_off = offset & 0xFF; /* block offset */

	addr[0] = offset >> 16; /* block number */
	addr[1] = offset >> 8; /* upper address octet */
	addr[2] = blk_off; /* lower address octet */
	alen = 3;
	#endif /* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */

	addr[0] \|= dev_addr; /* insert device address */

	#if defined(CFG_EEPROM_PAGE_WRITE_BITS)

	#define EEPROM_PAGE_SIZE (1 << CFG_EEPROM_PAGE_WRITE_BITS)
	#define EEPROM_PAGE_OFFSET(x) ((x) & (EEPROM_PAGE_SIZE - 1))

	maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
	#else
	maxlen = 0x100 - blk_off;
	#endif
	if (maxlen > I2C_RXTX_LEN)
	maxlen = I2C_RXTX_LEN;

	len = end - offset;
	if (len > maxlen)
	len = maxlen;
	#ifdef CONFIG_SPI
	spi_write (addr, alen, buffer, len);
	#else
	#if defined(CFG_EEPROM_X40430)
	/* Get the value of the control register.
	* Set current address (internal pointer in the x40430)
	* to 0x1ff.
	*/
	contr_r_addr[0] = 9;
	contr_r_addr[1] = 0xff;
	addr_void[0] = 0;
	addr_void[1] = addr[1];
	#ifdef CFG_I2C_EEPROM_ADDR
	contr_r_addr[0] \|= CFG_I2C_EEPROM_ADDR;
	addr_void[0] \|= CFG_I2C_EEPROM_ADDR;
	#endif
	contr_reg[0] = 0xff;
	if (i2c_read (contr_r_addr[0], contr_r_addr[1], 1, contr_reg, 1) != 0) {
	rcode = 1;
	}
	ctrl_reg_v = contr_reg[0];

	/* Are any of the eeprom blocks write protected?
	*/
	if (ctrl_reg_v & 0x18) {
	ctrl_reg_v &= ~0x18; /* reset block protect bits */
	ctrl_reg_v \|= 0x02; /* set write enable latch */
	ctrl_reg_v &= ~0x04; /* clear RWEL */

	/* Set write enable latch.
	*/
	contr_reg[0] = 0x02;
	if (i2c_write (contr_r_addr[0], 0xff, 1, contr_reg, 1) != 0) {
	rcode = 1;
	}

	/* Set register write enable latch.
	*/
	contr_reg[0] = 0x06;
	if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
	rcode = 1;
	}

	/* Modify ctrl register.
	*/
	contr_reg[0] = ctrl_reg_v;
	if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
	rcode = 1;
	}

	/* The write (above) is an operation on NV memory.
	* These can take some time (~5ms), and the device
	* will not respond to further I2C messages till
	* it's completed the write.
	* So poll device for an I2C acknowledge.
	* When we get one we know we can continue with other
	* operations.
	*/
	contr_reg[0] = 0;
	for (i = 0; i < MAX_ACKNOWLEDGE_POLLS; i++) {
	if (i2c_read (addr_void[0], addr_void[1], 1, contr_reg, 1) == 1)
	break; /* got ack */
	#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
	udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
	#endif
	}
	if (i == MAX_ACKNOWLEDGE_POLLS) {
	printf("EEPROM poll acknowledge failed\n");
	rcode = 1;
	}
	}

	/* Is the write enable latch on?.
	*/
	else if (!(ctrl_reg_v & 0x02)) {
	/* Set write enable latch.
	*/
	contr_reg[0] = 0x02;
	if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
	rcode = 1;
	}
	}
	/* Write is enabled ... now write eeprom value.
	*/
	#endif
	if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0)
	rcode = 1;

	#endif
	buffer += len;
	offset += len;

	#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
	udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
	#endif
	}
	return rcode;
	}

	/*-----------------------------------------------------------------------
	* Set default values
	*/
	#ifndef CFG_I2C_SPEED
	#define CFG_I2C_SPEED 50000
	#endif

	#ifndef CFG_I2C_SLAVE
	#define CFG_I2C_SLAVE 0xFE
	#endif

	void eeprom_init (void)
	{
	#if defined(CONFIG_SPI)
	spi_init_f ();
	#endif
	#if defined(CONFIG_HARD_I2C) \|\| \
	defined(CONFIG_SOFT_I2C)
	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
	#endif
	}
	/*-----------------------------------------------------------------------
	*/
	#endif /* CFG_CMD_EEPROM */