include/configs/csb226.h - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2000, 2001, 2002
  * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
  *
  * Configuration for the Cogent CSB226 board. For details see
  * http://www.cogcomp.com/csb_csb226.htm
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 /*
  * include/configs/csb226.h - configuration options, board specific
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #define DEBUG 1

 /*
  * If we are developing, we might want to start U-Boot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
 #define CONFIG_INIT_CRITICAL		/* undef for developing */

 /*
  * High Level Configuration Options
  * (easy to change)
  */
 #define CONFIG_PXA250 		1	/* This is an PXA250 CPU            */
 #define CONFIG_CSB226		1	/* on a CSB226 board                */

 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
 					/* for timer/console/ethernet       */
 /*
  * Hardware drivers
  */

 /*
  * select serial console configuration
  */
 #define CONFIG_FFUART		1	/* we use FFUART on CSB226 */

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE

 #define CONFIG_BAUDRATE		19200

 #define CONFIG_COMMANDS		(CONFIG_CMD_DFL & ~CFG_CMD_NET)

 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>

 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"root=/dev/nfs ip=bootp console=ttyS0,19200"
 #define CONFIG_ETHADDR		FF:FF:FF:FF:FF:FF
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_IPADDR		192.168.1.56
 #define CONFIG_SERVERIP		192.168.1.2
 #define CONFIG_BOOTCOMMAND	"bootm 0x40000"
 #define CONFIG_SHOW_BOOT_PROGRESS

 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif

 /*
  * Miscellaneous configurable options
  */

 /*
  * Size of malloc() pool; this lives below the uppermost 128 KiB which are
  * used for the RAM copy of the uboot code
  *
  */
 #define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)

 #define CFG_LONGHELP				/* undef to save memory         */
 #define CFG_PROMPT		"uboot> "	/* Monitor Command Prompt       */
 #define CFG_CBSIZE		128		/* Console I/O Buffer Size      */
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS		16		/* max number of command args   */
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */

 #define CFG_MEMTEST_START	0xa0400000      /* memtest works on     */
 #define CFG_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */

 #undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */

 #define CFG_LOAD_ADDR           0xa7fe0000      /* default load address */
 						/* RS: where is this documented? */
 						/* RS: is this where U-Boot is  */
 						/* RS: relocated to in RAM?      */

 #define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
 						/* RS: the oscillator is actually 3680130?? */
 #define CFG_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
 						/* 0101000001 */
 						/*      ^^^^^ Memory Speed 99.53 MHz         */
 						/*    ^^      Run Mode Speed = 2x Mem Speed  */
 						/* ^^         Turbo Mode Sp. = 1x Run M. Sp. */

 #define CFG_MONITOR_LEN		0x20000		/* 128 KiB */

                                                 /* valid baudrates */
 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }

 /*
  * Stack sizes
  *
  * The stack sizes are set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
 #ifdef  CONFIG_USE_IRQ
 #define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
 #define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
 #endif

 /*
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM   */
 #define PHYS_SDRAM_1		0xa0000000	/* SDRAM Bank #1            */
 #define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB                    */

 #define PHYS_FLASH_1		0x00000000	/* Flash Bank #1            */
 #define PHYS_FLASH_SIZE		0x02000000	/* 32 MB                    */

 #define CFG_DRAM_BASE		0xa0000000	/* RAM starts here          */
 #define CFG_DRAM_SIZE		0x02000000

 #define CFG_FLASH_BASE          PHYS_FLASH_1

 /*
  * GPIO settings
  */
 #define CFG_GPSR0_VAL       0xFFFFFFFF
 #define CFG_GPSR1_VAL       0xFFFFFFFF
 #define CFG_GPSR2_VAL       0xFFFFFFFF
 #define CFG_GPCR0_VAL       0x08022080
 #define CFG_GPCR1_VAL       0x00000000
 #define CFG_GPCR2_VAL       0x00000000
 #define CFG_GPDR0_VAL       0xCD82A878
 #define CFG_GPDR1_VAL       0xFCFFAB80
 #define CFG_GPDR2_VAL       0x0001FFFF
 #define CFG_GAFR0_L_VAL     0x80000000
 #define CFG_GAFR0_U_VAL     0xA5254010
 #define CFG_GAFR1_L_VAL     0x599A9550
 #define CFG_GAFR1_U_VAL     0xAAA5AAAA
 #define CFG_GAFR2_L_VAL     0xAAAAAAAA
 #define CFG_GAFR2_U_VAL     0x00000002

 /* FIXME: set GPIO_RER/FER */

 #define CFG_PSSR_VAL        0x20

 /*
  * Memory settings
  */
 #define CFG_MSC0_VAL        0x2EF025D0
 #define CFG_MSC1_VAL        0x00003F64
 #define CFG_MSC2_VAL        0x00000000
 #define CFG_MDCNFG_VAL      0x09a909a9
 #define CFG_MDREFR_VAL      0x03ca0030
 #define CFG_MDMRS_VAL       0x00220022

 /*
  * PCMCIA and CF Interfaces
  */
 #define CFG_MECR_VAL        0x00000000
 #define CFG_MCMEM0_VAL      0x00000000
 #define CFG_MCMEM1_VAL      0x00000000
 #define CFG_MCATT0_VAL      0x00000000
 #define CFG_MCATT1_VAL      0x00000000
 #define CFG_MCIO0_VAL       0x00000000
 #define CFG_MCIO1_VAL       0x00000000

 #define CSB226_USER_LED0	0x00000008
 #define CSB226_USER_LED1	0x00000010
 #define CSB226_USER_LED2	0x00000020


 /*
  * FLASH and environment organization
  */
 #define CFG_MAX_FLASH_BANKS     1	/* max number of memory banks       */
 #define CFG_MAX_FLASH_SECT	128	/* max number of sect. on one chip  */

 /* timeout values are in ticks */
 #define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase       */
 #define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write       */

 #define	CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)
 					/* Addr of Environment Sector       */
 #define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector */

 #endif  /* __CONFIG_H */
	/*
	* (C) Copyright 2000, 2001, 2002
	* Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
	*
	* Configuration for the Cogent CSB226 board. For details see
	* http://www.cogcomp.com/csb_csb226.htm
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	/*
	* include/configs/csb226.h - configuration options, board specific
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#define DEBUG 1

	/*
	* If we are developing, we might want to start U-Boot from ram
	* so we MUST NOT initialize critical regs like mem-timing ...
	*/
	#define CONFIG_INIT_CRITICAL /* undef for developing */

	/*
	* High Level Configuration Options
	* (easy to change)
	*/
	#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
	#define CONFIG_CSB226 1 /* on a CSB226 board */

	#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
	/* for timer/console/ethernet */
	/*
	* Hardware drivers
	*/

	/*
	* select serial console configuration
	*/
	#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE

	#define CONFIG_BAUDRATE 19200

	#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET)

	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	#include <cmd_confdefs.h>

	#define CONFIG_BOOTDELAY 3
	#define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200"
	#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF
	#define CONFIG_NETMASK 255.255.255.0
	#define CONFIG_IPADDR 192.168.1.56
	#define CONFIG_SERVERIP 192.168.1.2
	#define CONFIG_BOOTCOMMAND "bootm 0x40000"
	#define CONFIG_SHOW_BOOT_PROGRESS

	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	#endif

	/*
	* Miscellaneous configurable options
	*/

	/*
	* Size of malloc() pool; this lives below the uppermost 128 KiB which are
	* used for the RAM copy of the uboot code
	*
	*/
	#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)

	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "uboot> " /* Monitor Command Prompt */
	#define CFG_CBSIZE 128 /* Console I/O Buffer Size */
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
	#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */

	#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */

	#define CFG_LOAD_ADDR 0xa7fe0000 /* default load address */
	/* RS: where is this documented? */
	/* RS: is this where U-Boot is */
	/* RS: relocated to in RAM? */

	#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
	/* RS: the oscillator is actually 3680130?? */
	#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
	/* 0101000001 */
	/* ^^^^^ Memory Speed 99.53 MHz */
	/* ^^ Run Mode Speed = 2x Mem Speed */
	/* ^^ Turbo Mode Sp. = 1x Run M. Sp. */

	#define CFG_MONITOR_LEN 0x20000 /* 128 KiB */

	/* valid baudrates */
	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

	/*
	* Stack sizes
	*
	* The stack sizes are set up in start.S using the settings below
	*/
	#define CONFIG_STACKSIZE (1281024) / regular stack */
	#ifdef CONFIG_USE_IRQ
	#define CONFIG_STACKSIZE_IRQ (41024) / IRQ stack */
	#define CONFIG_STACKSIZE_FIQ (41024) / FIQ stack */
	#endif

	/*
	* Physical Memory Map
	*/
	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
	#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
	#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */

	#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
	#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */

	#define CFG_DRAM_BASE 0xa0000000 /* RAM starts here */
	#define CFG_DRAM_SIZE 0x02000000

	#define CFG_FLASH_BASE PHYS_FLASH_1

	/*
	* GPIO settings
	*/
	#define CFG_GPSR0_VAL 0xFFFFFFFF
	#define CFG_GPSR1_VAL 0xFFFFFFFF
	#define CFG_GPSR2_VAL 0xFFFFFFFF
	#define CFG_GPCR0_VAL 0x08022080
	#define CFG_GPCR1_VAL 0x00000000
	#define CFG_GPCR2_VAL 0x00000000
	#define CFG_GPDR0_VAL 0xCD82A878
	#define CFG_GPDR1_VAL 0xFCFFAB80
	#define CFG_GPDR2_VAL 0x0001FFFF
	#define CFG_GAFR0_L_VAL 0x80000000
	#define CFG_GAFR0_U_VAL 0xA5254010
	#define CFG_GAFR1_L_VAL 0x599A9550
	#define CFG_GAFR1_U_VAL 0xAAA5AAAA
	#define CFG_GAFR2_L_VAL 0xAAAAAAAA
	#define CFG_GAFR2_U_VAL 0x00000002

	/* FIXME: set GPIO_RER/FER */

	#define CFG_PSSR_VAL 0x20

	/*
	* Memory settings
	*/
	#define CFG_MSC0_VAL 0x2EF025D0
	#define CFG_MSC1_VAL 0x00003F64
	#define CFG_MSC2_VAL 0x00000000
	#define CFG_MDCNFG_VAL 0x09a909a9
	#define CFG_MDREFR_VAL 0x03ca0030
	#define CFG_MDMRS_VAL 0x00220022

	/*
	* PCMCIA and CF Interfaces
	*/
	#define CFG_MECR_VAL 0x00000000
	#define CFG_MCMEM0_VAL 0x00000000
	#define CFG_MCMEM1_VAL 0x00000000
	#define CFG_MCATT0_VAL 0x00000000
	#define CFG_MCATT1_VAL 0x00000000
	#define CFG_MCIO0_VAL 0x00000000
	#define CFG_MCIO1_VAL 0x00000000

	#define CSB226_USER_LED0 0x00000008
	#define CSB226_USER_LED1 0x00000010
	#define CSB226_USER_LED2 0x00000020


	/*
	* FLASH and environment organization
	*/
	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
	#define CFG_MAX_FLASH_SECT 128 /* max number of sect. on one chip */

	/* timeout values are in ticks */
	#define CFG_FLASH_ERASE_TOUT (2CFG_HZ) / Timeout for Flash Erase */
	#define CFG_FLASH_WRITE_TOUT (2CFG_HZ) / Timeout for Flash Write */

	#define CFG_ENV_IS_IN_FLASH 1
	#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000)
	/* Addr of Environment Sector */
	#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */

	#endif /* __CONFIG_H */