| /* |
| * Copyright (C) 2017 Soeren Moch <smoch@web.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #define __ASSEMBLY__ |
| #include "asm/arch/crm_regs.h" |
| #include "asm/arch/iomux.h" |
| #include "asm/arch/mx6-ddr.h" |
| |
| /* image version 2 for imx6 */ |
| IMAGE_VERSION 2 |
| BOOT_FROM sd |
| |
| /* set the default clock gates to save power */ |
| DATA 4, CCM_CCGR0, 0x00C03F3F |
| DATA 4, CCM_CCGR1, 0x0030FC03 |
| DATA 4, CCM_CCGR2, 0x0FFFC000 |
| DATA 4, CCM_CCGR3, 0x3FF00000 |
| DATA 4, CCM_CCGR4, 0x00FFF300 |
| DATA 4, CCM_CCGR5, 0x0F0000C3 |
| DATA 4, CCM_CCGR6, 0x000003FF |
| /* set CKO1 (used as AUDIO_MCLK) to ahb_clk_root/8 = 16.5 MHz */ |
| DATA 4, CCM_CCOSR, 0x000000fb |
| |
| /* enable AXI cache for VDOA/VPU/IPU */ |
| DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF |
| /* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */ |
| DATA 4, MX6_IOMUXC_GPR6, 0x77177717 |
| DATA 4, MX6_IOMUXC_GPR7, 0x77177717 |
| |
| |
| /* |
| * DDR3/DDR3L settings |
| * use default 40 Ohm pad drive strength, no odt |
| * 4x256Mx16 DDR3L-1066 7-7-7 |
| */ |
| |
| /* disable dq pullup */ |
| DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 |
| /* disable dqs pullup */ |
| DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 |
| DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 |
| DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 |
| DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 |
| DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030 |
| DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030 |
| DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030 |
| DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030 |
| /* set ddr input mode for dq signals */ |
| DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 |
| /* set ddr input mode for dqs signals */ |
| DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 |
| /* set pad calibration type to DDR3 */ |
| DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 |
| /* ZQ calibration */ |
| DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 |
| /* dqs write delay */ |
| DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001f001f |
| DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001f001f |
| DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001f001f |
| DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001f001f |
| /* dqs read delay */ |
| DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 |
| DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 |
| DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 |
| DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 |
| DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 |
| DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 |
| DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 |
| DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 |
| /* dqs read gating control */ |
| DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x43000300 |
| DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03000300 |
| DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43000300 |
| DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03000300 |
| /* start delay line calibration */ |
| DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 |
| /* tRFC=0x89+1,tXS=0x8e+1,tXP=3+1,tXPDLL=0xc+1,tFAW=0x17+1,tCL=0x4+3 */ |
| DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E7974 |
| /* tRCD=6+1,tRP=6+1,tRC=0x1a+1,tRAS=0x13+1,tRPA=tRP+1,tWR=7+1,tMRD=0xb+1,tCWL=4+2 */ |
| DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538F64 |
| /* tDLLK=0x1ff+1,tRTP=3+1,tWTR=3+1,tRRD=3+1 */ |
| DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB |
| /* RTW_SAME=2,WTR_DIFF=3,WTW_DIFF=3,RTW_DIFF=2,RTR_DIFF=2 */ |
| DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 |
| /* tXPR=0x8e+1,SDE2RST=0x10-2,RST2CKE=0x23-2 */ |
| DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023 |
| /* ODT timing */ |
| DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 |
| /* read odt settings, 120 Ohm */ |
| DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00011117 |
| DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00011117 |
| /* cs0, 15-bit row, 10-bit column, BL 8, 64-bit bus */ |
| DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000 |
| /* interleaved bank access (row/bank/col), 5 cycles additional read delay */ |
| DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 |
| /* 2GiByte RAM at cs0 */ |
| DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 |
| /* load mode registers of external ddr chips */ |
| DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030 |
| DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031 |
| DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032 |
| DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 |
| /* externel chip ZQ calibration */ |
| DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 |
| /* configure and start refreshes, 8 refresh commands at 32 kHz */ |
| DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 |
| /* tCKE=2+1,tCKSRX=6,tCKSE=6, active power down after 256 cycles (setting 5) */ |
| DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 |
| /* set automatic self refresh */ |
| DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 |
| /* controller configuration finished */ |
| DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 |