| /* |
| * Copyright (C) 2006 Freescale Semiconductor, Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| */ |
| |
| /* |
| * PCI Configuration space access support for MPC83xx PCI Bridge |
| */ |
| #include <asm/mmu.h> |
| #include <asm/io.h> |
| #include <common.h> |
| #include <pci.h> |
| #include <i2c.h> |
| #if defined(CONFIG_OF_LIBFDT) |
| #include <libfdt.h> |
| #include <fdt_support.h> |
| #endif |
| |
| #include <asm/fsl_i2c.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if defined(CONFIG_PCI) |
| #define PCI_FUNCTION_CONFIG 0x44 |
| #define PCI_FUNCTION_CFG_LOCK 0x20 |
| |
| /* |
| * Initialize PCI Devices, report devices found |
| */ |
| #ifndef CONFIG_PCI_PNP |
| static struct pci_config_table pci_mpc83xxemds_config_table[] = { |
| { |
| PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, |
| pci_cfgfunc_config_device, |
| {PCI_ENET0_IOADDR, |
| PCI_ENET0_MEMADDR, |
| PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} |
| }, |
| {} |
| } |
| #endif |
| static struct pci_controller hose[] = { |
| { |
| #ifndef CONFIG_PCI_PNP |
| config_table:pci_mpc83xxemds_config_table, |
| #endif |
| }, |
| }; |
| |
| /********************************************************************** |
| * pci_init_board() |
| *********************************************************************/ |
| void pci_init_board(void) |
| #ifdef CONFIG_PCISLAVE |
| { |
| u16 reg16; |
| volatile immap_t *immr; |
| volatile law83xx_t *pci_law; |
| volatile pot83xx_t *pci_pot; |
| volatile pcictrl83xx_t *pci_ctrl; |
| volatile pciconf83xx_t *pci_conf; |
| |
| immr = (immap_t *) CONFIG_SYS_IMMR; |
| pci_law = immr->sysconf.pcilaw; |
| pci_pot = immr->ios.pot; |
| pci_ctrl = immr->pci_ctrl; |
| pci_conf = immr->pci_conf; |
| /* |
| * Configure PCI Inbound Translation Windows |
| */ |
| pci_ctrl[0].pitar0 = 0x0; |
| pci_ctrl[0].pibar0 = 0x0; |
| pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | |
| PIWAR_WTT_SNOOP | PIWAR_IWS_4K; |
| |
| pci_ctrl[0].pitar1 = 0x0; |
| pci_ctrl[0].pibar1 = 0x0; |
| pci_ctrl[0].piebar1 = 0x0; |
| pci_ctrl[0].piwar1 &= ~PIWAR_EN; |
| |
| pci_ctrl[0].pitar2 = 0x0; |
| pci_ctrl[0].pibar2 = 0x0; |
| pci_ctrl[0].piebar2 = 0x0; |
| pci_ctrl[0].piwar2 &= ~PIWAR_EN; |
| |
| hose[0].first_busno = 0; |
| hose[0].last_busno = 0xff; |
| pci_setup_indirect(&hose[0], |
| (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304)); |
| reg16 = 0xff; |
| |
| pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), |
| PCI_COMMAND, ®16); |
| reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; |
| pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), |
| PCI_COMMAND, reg16); |
| |
| /* |
| * Clear non-reserved bits in status register. |
| */ |
| pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), |
| PCI_STATUS, 0xffff); |
| pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), |
| PCI_LATENCY_TIMER, 0x80); |
| |
| /* |
| * Unlock configuration lock in PCI function configuration register. |
| */ |
| pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), |
| PCI_FUNCTION_CONFIG, ®16); |
| reg16 &= ~(PCI_FUNCTION_CFG_LOCK); |
| pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), |
| PCI_FUNCTION_CONFIG, reg16); |
| |
| printf("Enabled PCI 32bit Agent Mode\n"); |
| } |
| #else |
| { |
| volatile immap_t *immr; |
| volatile clk83xx_t *clk; |
| volatile law83xx_t *pci_law; |
| volatile pot83xx_t *pci_pot; |
| volatile pcictrl83xx_t *pci_ctrl; |
| volatile pciconf83xx_t *pci_conf; |
| |
| u16 reg16; |
| u32 val32; |
| u32 dev; |
| |
| immr = (immap_t *) CONFIG_SYS_IMMR; |
| clk = (clk83xx_t *) & immr->clk; |
| pci_law = immr->sysconf.pcilaw; |
| pci_pot = immr->ios.pot; |
| pci_ctrl = immr->pci_ctrl; |
| pci_conf = immr->pci_conf; |
| /* |
| * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode |
| */ |
| val32 = clk->occr; |
| udelay(2000); |
| #if defined(PCI_66M) |
| clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; |
| printf("PCI clock is 66MHz\n"); |
| #elif defined(PCI_33M) |
| clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | |
| OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; |
| printf("PCI clock is 33MHz\n"); |
| #else |
| clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; |
| printf("PCI clock is 66MHz\n"); |
| #endif |
| udelay(2000); |
| |
| /* |
| * Configure PCI Local Access Windows |
| */ |
| pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR; |
| pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; |
| |
| pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR; |
| pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; |
| |
| /* |
| * Configure PCI Outbound Translation Windows |
| */ |
| |
| /* PCI mem space - prefetch */ |
| pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; |
| pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; |
| pci_pot[0].pocmr = |
| POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); |
| |
| /* PCI mmio - non-prefetch mem space */ |
| pci_pot[1].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; |
| pci_pot[1].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; |
| pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); |
| |
| /* PCI IO space */ |
| pci_pot[2].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK; |
| pci_pot[2].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; |
| pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); |
| |
| /* |
| * Configure PCI Inbound Translation Windows |
| */ |
| pci_ctrl[0].pitar1 = (CONFIG_SYS_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; |
| pci_ctrl[0].pibar1 = (CONFIG_SYS_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; |
| pci_ctrl[0].piebar1 = 0x0; |
| pci_ctrl[0].piwar1 = |
| PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | |
| PIWAR_IWS_2G; |
| |
| /* |
| * Release PCI RST Output signal |
| */ |
| udelay(2000); |
| pci_ctrl[0].gcr = 1; |
| udelay(2000); |
| |
| hose[0].first_busno = 0; |
| hose[0].last_busno = 0xff; |
| |
| /* PCI memory prefetch space */ |
| pci_set_region(hose[0].regions + 0, |
| CONFIG_SYS_PCI_MEM_BASE, |
| CONFIG_SYS_PCI_MEM_PHYS, |
| CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); |
| |
| /* PCI memory space */ |
| pci_set_region(hose[0].regions + 1, |
| CONFIG_SYS_PCI_MMIO_BASE, |
| CONFIG_SYS_PCI_MMIO_PHYS, CONFIG_SYS_PCI_MMIO_SIZE, PCI_REGION_MEM); |
| |
| /* PCI IO space */ |
| pci_set_region(hose[0].regions + 2, |
| CONFIG_SYS_PCI_IO_BASE, |
| CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO); |
| |
| /* System memory space */ |
| pci_set_region(hose[0].regions + 3, |
| CONFIG_SYS_PCI_SLV_MEM_LOCAL, |
| CONFIG_SYS_PCI_SLV_MEM_BUS, |
| CONFIG_SYS_PCI_SLV_MEM_SIZE, |
| PCI_REGION_MEM | PCI_REGION_MEMORY); |
| |
| hose[0].region_count = 4; |
| |
| pci_setup_indirect(&hose[0], |
| (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304)); |
| |
| pci_register_hose(hose); |
| |
| /* |
| * Write command register |
| */ |
| reg16 = 0xff; |
| dev = PCI_BDF(0, 0, 0); |
| pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); |
| reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; |
| pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); |
| |
| /* |
| * Clear non-reserved bits in status register. |
| */ |
| pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); |
| pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); |
| pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); |
| |
| /* |
| * Hose scan. |
| */ |
| hose->last_busno = pci_hose_scan(hose); |
| } |
| #endif /* CONFIG_PCISLAVE */ |
| |
| #if defined(CONFIG_OF_LIBFDT) |
| void ft_pci_setup(void *blob, bd_t *bd) |
| { |
| int nodeoffset; |
| int tmp[2]; |
| const char *path; |
| |
| nodeoffset = fdt_path_offset(blob, "/aliases"); |
| if (nodeoffset >= 0) { |
| path = fdt_getprop(blob, nodeoffset, "pci0", NULL); |
| if (path) { |
| tmp[0] = cpu_to_be32(hose[0].first_busno); |
| tmp[1] = cpu_to_be32(hose[0].last_busno); |
| do_fixup_by_path(blob, path, "bus-range", |
| &tmp, sizeof(tmp), 1); |
| |
| tmp[0] = cpu_to_be32(gd->pci_clk); |
| do_fixup_by_path(blob, path, "clock-frequency", |
| &tmp, sizeof(tmp[0]), 1); |
| } |
| } |
| } |
| #endif /* CONFIG_OF_LIBFDT */ |
| #endif /* CONFIG_PCI */ |