| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| /* |
| * Copyright (C) 2018, STMicroelectronics - All Rights Reserved |
| */ |
| |
| #define LOG_CATEGORY UCLASS_CLK |
| |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <div64.h> |
| #include <dm.h> |
| #include <init.h> |
| #include <log.h> |
| #include <regmap.h> |
| #include <spl.h> |
| #include <syscon.h> |
| #include <time.h> |
| #include <vsprintf.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/global_data.h> |
| #include <dm/device_compat.h> |
| #include <dt-bindings/clock/stm32mp1-clks.h> |
| #include <dt-bindings/clock/stm32mp1-clksrc.h> |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifndef CONFIG_TFABOOT |
| #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) |
| /* activate clock tree initialization in the driver */ |
| #define STM32MP1_CLOCK_TREE_INIT |
| #endif |
| #endif |
| |
| #define MAX_HSI_HZ 64000000 |
| |
| /* TIMEOUT */ |
| #define TIMEOUT_200MS 200000 |
| #define TIMEOUT_1S 1000000 |
| |
| /* STGEN registers */ |
| #define STGENC_CNTCR 0x00 |
| #define STGENC_CNTSR 0x04 |
| #define STGENC_CNTCVL 0x08 |
| #define STGENC_CNTCVU 0x0C |
| #define STGENC_CNTFID0 0x20 |
| |
| #define STGENC_CNTCR_EN BIT(0) |
| |
| /* RCC registers */ |
| #define RCC_OCENSETR 0x0C |
| #define RCC_OCENCLRR 0x10 |
| #define RCC_HSICFGR 0x18 |
| #define RCC_MPCKSELR 0x20 |
| #define RCC_ASSCKSELR 0x24 |
| #define RCC_RCK12SELR 0x28 |
| #define RCC_MPCKDIVR 0x2C |
| #define RCC_AXIDIVR 0x30 |
| #define RCC_APB4DIVR 0x3C |
| #define RCC_APB5DIVR 0x40 |
| #define RCC_RTCDIVR 0x44 |
| #define RCC_MSSCKSELR 0x48 |
| #define RCC_PLL1CR 0x80 |
| #define RCC_PLL1CFGR1 0x84 |
| #define RCC_PLL1CFGR2 0x88 |
| #define RCC_PLL1FRACR 0x8C |
| #define RCC_PLL1CSGR 0x90 |
| #define RCC_PLL2CR 0x94 |
| #define RCC_PLL2CFGR1 0x98 |
| #define RCC_PLL2CFGR2 0x9C |
| #define RCC_PLL2FRACR 0xA0 |
| #define RCC_PLL2CSGR 0xA4 |
| #define RCC_I2C46CKSELR 0xC0 |
| #define RCC_SPI6CKSELR 0xC4 |
| #define RCC_CPERCKSELR 0xD0 |
| #define RCC_STGENCKSELR 0xD4 |
| #define RCC_DDRITFCR 0xD8 |
| #define RCC_BDCR 0x140 |
| #define RCC_RDLSICR 0x144 |
| #define RCC_MP_APB4ENSETR 0x200 |
| #define RCC_MP_APB5ENSETR 0x208 |
| #define RCC_MP_AHB5ENSETR 0x210 |
| #define RCC_MP_AHB6ENSETR 0x218 |
| #define RCC_OCRDYR 0x808 |
| #define RCC_DBGCFGR 0x80C |
| #define RCC_RCK3SELR 0x820 |
| #define RCC_RCK4SELR 0x824 |
| #define RCC_MCUDIVR 0x830 |
| #define RCC_APB1DIVR 0x834 |
| #define RCC_APB2DIVR 0x838 |
| #define RCC_APB3DIVR 0x83C |
| #define RCC_PLL3CR 0x880 |
| #define RCC_PLL3CFGR1 0x884 |
| #define RCC_PLL3CFGR2 0x888 |
| #define RCC_PLL3FRACR 0x88C |
| #define RCC_PLL3CSGR 0x890 |
| #define RCC_PLL4CR 0x894 |
| #define RCC_PLL4CFGR1 0x898 |
| #define RCC_PLL4CFGR2 0x89C |
| #define RCC_PLL4FRACR 0x8A0 |
| #define RCC_PLL4CSGR 0x8A4 |
| #define RCC_I2C12CKSELR 0x8C0 |
| #define RCC_I2C35CKSELR 0x8C4 |
| #define RCC_SPI2S1CKSELR 0x8D8 |
| #define RCC_SPI2S23CKSELR 0x8DC |
| #define RCC_SPI45CKSELR 0x8E0 |
| #define RCC_UART6CKSELR 0x8E4 |
| #define RCC_UART24CKSELR 0x8E8 |
| #define RCC_UART35CKSELR 0x8EC |
| #define RCC_UART78CKSELR 0x8F0 |
| #define RCC_SDMMC12CKSELR 0x8F4 |
| #define RCC_SDMMC3CKSELR 0x8F8 |
| #define RCC_ETHCKSELR 0x8FC |
| #define RCC_QSPICKSELR 0x900 |
| #define RCC_FMCCKSELR 0x904 |
| #define RCC_USBCKSELR 0x91C |
| #define RCC_DSICKSELR 0x924 |
| #define RCC_ADCCKSELR 0x928 |
| #define RCC_MP_APB1ENSETR 0xA00 |
| #define RCC_MP_APB2ENSETR 0XA08 |
| #define RCC_MP_APB3ENSETR 0xA10 |
| #define RCC_MP_AHB2ENSETR 0xA18 |
| #define RCC_MP_AHB3ENSETR 0xA20 |
| #define RCC_MP_AHB4ENSETR 0xA28 |
| |
| /* used for most of SELR register */ |
| #define RCC_SELR_SRC_MASK GENMASK(2, 0) |
| #define RCC_SELR_SRCRDY BIT(31) |
| |
| /* Values of RCC_MPCKSELR register */ |
| #define RCC_MPCKSELR_HSI 0 |
| #define RCC_MPCKSELR_HSE 1 |
| #define RCC_MPCKSELR_PLL 2 |
| #define RCC_MPCKSELR_PLL_MPUDIV 3 |
| |
| /* Values of RCC_ASSCKSELR register */ |
| #define RCC_ASSCKSELR_HSI 0 |
| #define RCC_ASSCKSELR_HSE 1 |
| #define RCC_ASSCKSELR_PLL 2 |
| |
| /* Values of RCC_MSSCKSELR register */ |
| #define RCC_MSSCKSELR_HSI 0 |
| #define RCC_MSSCKSELR_HSE 1 |
| #define RCC_MSSCKSELR_CSI 2 |
| #define RCC_MSSCKSELR_PLL 3 |
| |
| /* Values of RCC_CPERCKSELR register */ |
| #define RCC_CPERCKSELR_HSI 0 |
| #define RCC_CPERCKSELR_CSI 1 |
| #define RCC_CPERCKSELR_HSE 2 |
| |
| /* used for most of DIVR register : max div for RTC */ |
| #define RCC_DIVR_DIV_MASK GENMASK(5, 0) |
| #define RCC_DIVR_DIVRDY BIT(31) |
| |
| /* Masks for specific DIVR registers */ |
| #define RCC_APBXDIV_MASK GENMASK(2, 0) |
| #define RCC_MPUDIV_MASK GENMASK(2, 0) |
| #define RCC_AXIDIV_MASK GENMASK(2, 0) |
| #define RCC_MCUDIV_MASK GENMASK(3, 0) |
| |
| /* offset between RCC_MP_xxxENSETR and RCC_MP_xxxENCLRR registers */ |
| #define RCC_MP_ENCLRR_OFFSET 4 |
| |
| /* Fields of RCC_BDCR register */ |
| #define RCC_BDCR_LSEON BIT(0) |
| #define RCC_BDCR_LSEBYP BIT(1) |
| #define RCC_BDCR_LSERDY BIT(2) |
| #define RCC_BDCR_DIGBYP BIT(3) |
| #define RCC_BDCR_LSEDRV_MASK GENMASK(5, 4) |
| #define RCC_BDCR_LSEDRV_SHIFT 4 |
| #define RCC_BDCR_LSECSSON BIT(8) |
| #define RCC_BDCR_RTCCKEN BIT(20) |
| #define RCC_BDCR_RTCSRC_MASK GENMASK(17, 16) |
| #define RCC_BDCR_RTCSRC_SHIFT 16 |
| |
| /* Fields of RCC_RDLSICR register */ |
| #define RCC_RDLSICR_LSION BIT(0) |
| #define RCC_RDLSICR_LSIRDY BIT(1) |
| |
| /* used for ALL PLLNCR registers */ |
| #define RCC_PLLNCR_PLLON BIT(0) |
| #define RCC_PLLNCR_PLLRDY BIT(1) |
| #define RCC_PLLNCR_SSCG_CTRL BIT(2) |
| #define RCC_PLLNCR_DIVPEN BIT(4) |
| #define RCC_PLLNCR_DIVQEN BIT(5) |
| #define RCC_PLLNCR_DIVREN BIT(6) |
| #define RCC_PLLNCR_DIVEN_SHIFT 4 |
| |
| /* used for ALL PLLNCFGR1 registers */ |
| #define RCC_PLLNCFGR1_DIVM_SHIFT 16 |
| #define RCC_PLLNCFGR1_DIVM_MASK GENMASK(21, 16) |
| #define RCC_PLLNCFGR1_DIVN_SHIFT 0 |
| #define RCC_PLLNCFGR1_DIVN_MASK GENMASK(8, 0) |
| /* only for PLL3 and PLL4 */ |
| #define RCC_PLLNCFGR1_IFRGE_SHIFT 24 |
| #define RCC_PLLNCFGR1_IFRGE_MASK GENMASK(25, 24) |
| |
| /* used for ALL PLLNCFGR2 registers , using stm32mp1_div_id */ |
| #define RCC_PLLNCFGR2_SHIFT(div_id) ((div_id) * 8) |
| #define RCC_PLLNCFGR2_DIVX_MASK GENMASK(6, 0) |
| #define RCC_PLLNCFGR2_DIVP_SHIFT RCC_PLLNCFGR2_SHIFT(_DIV_P) |
| #define RCC_PLLNCFGR2_DIVP_MASK GENMASK(6, 0) |
| #define RCC_PLLNCFGR2_DIVQ_SHIFT RCC_PLLNCFGR2_SHIFT(_DIV_Q) |
| #define RCC_PLLNCFGR2_DIVQ_MASK GENMASK(14, 8) |
| #define RCC_PLLNCFGR2_DIVR_SHIFT RCC_PLLNCFGR2_SHIFT(_DIV_R) |
| #define RCC_PLLNCFGR2_DIVR_MASK GENMASK(22, 16) |
| |
| /* used for ALL PLLNFRACR registers */ |
| #define RCC_PLLNFRACR_FRACV_SHIFT 3 |
| #define RCC_PLLNFRACR_FRACV_MASK GENMASK(15, 3) |
| #define RCC_PLLNFRACR_FRACLE BIT(16) |
| |
| /* used for ALL PLLNCSGR registers */ |
| #define RCC_PLLNCSGR_INC_STEP_SHIFT 16 |
| #define RCC_PLLNCSGR_INC_STEP_MASK GENMASK(30, 16) |
| #define RCC_PLLNCSGR_MOD_PER_SHIFT 0 |
| #define RCC_PLLNCSGR_MOD_PER_MASK GENMASK(12, 0) |
| #define RCC_PLLNCSGR_SSCG_MODE_SHIFT 15 |
| #define RCC_PLLNCSGR_SSCG_MODE_MASK BIT(15) |
| |
| /* used for RCC_OCENSETR and RCC_OCENCLRR registers */ |
| #define RCC_OCENR_HSION BIT(0) |
| #define RCC_OCENR_CSION BIT(4) |
| #define RCC_OCENR_DIGBYP BIT(7) |
| #define RCC_OCENR_HSEON BIT(8) |
| #define RCC_OCENR_HSEBYP BIT(10) |
| #define RCC_OCENR_HSECSSON BIT(11) |
| |
| /* Fields of RCC_OCRDYR register */ |
| #define RCC_OCRDYR_HSIRDY BIT(0) |
| #define RCC_OCRDYR_HSIDIVRDY BIT(2) |
| #define RCC_OCRDYR_CSIRDY BIT(4) |
| #define RCC_OCRDYR_HSERDY BIT(8) |
| |
| /* Fields of DDRITFCR register */ |
| #define RCC_DDRITFCR_DDRCKMOD_MASK GENMASK(22, 20) |
| #define RCC_DDRITFCR_DDRCKMOD_SHIFT 20 |
| #define RCC_DDRITFCR_DDRCKMOD_SSR 0 |
| |
| /* Fields of RCC_HSICFGR register */ |
| #define RCC_HSICFGR_HSIDIV_MASK GENMASK(1, 0) |
| |
| /* used for MCO related operations */ |
| #define RCC_MCOCFG_MCOON BIT(12) |
| #define RCC_MCOCFG_MCODIV_MASK GENMASK(7, 4) |
| #define RCC_MCOCFG_MCODIV_SHIFT 4 |
| #define RCC_MCOCFG_MCOSRC_MASK GENMASK(2, 0) |
| |
| enum stm32mp1_parent_id { |
| /* |
| * _HSI, _HSE, _CSI, _LSI, _LSE should not be moved |
| * they are used as index in osc_clk[] as clock reference |
| */ |
| _HSI, |
| _HSE, |
| _CSI, |
| _LSI, |
| _LSE, |
| _I2S_CKIN, |
| NB_OSC, |
| |
| /* other parent source */ |
| _HSI_KER = NB_OSC, |
| _HSE_KER, |
| _HSE_KER_DIV2, |
| _CSI_KER, |
| _PLL1_P, |
| _PLL1_Q, |
| _PLL1_R, |
| _PLL2_P, |
| _PLL2_Q, |
| _PLL2_R, |
| _PLL3_P, |
| _PLL3_Q, |
| _PLL3_R, |
| _PLL4_P, |
| _PLL4_Q, |
| _PLL4_R, |
| _ACLK, |
| _PCLK1, |
| _PCLK2, |
| _PCLK3, |
| _PCLK4, |
| _PCLK5, |
| _HCLK6, |
| _HCLK2, |
| _CK_PER, |
| _CK_MPU, |
| _CK_MCU, |
| _DSI_PHY, |
| _USB_PHY_48, |
| _PARENT_NB, |
| _UNKNOWN_ID = 0xff, |
| }; |
| |
| enum stm32mp1_parent_sel { |
| _I2C12_SEL, |
| _I2C35_SEL, |
| _I2C46_SEL, |
| _UART6_SEL, |
| _UART24_SEL, |
| _UART35_SEL, |
| _UART78_SEL, |
| _SDMMC12_SEL, |
| _SDMMC3_SEL, |
| _ETH_SEL, |
| _QSPI_SEL, |
| _FMC_SEL, |
| _USBPHY_SEL, |
| _USBO_SEL, |
| _STGEN_SEL, |
| _DSI_SEL, |
| _ADC12_SEL, |
| _SPI1_SEL, |
| _SPI23_SEL, |
| _SPI45_SEL, |
| _SPI6_SEL, |
| _RTC_SEL, |
| _PARENT_SEL_NB, |
| _UNKNOWN_SEL = 0xff, |
| }; |
| |
| enum stm32mp1_pll_id { |
| _PLL1, |
| _PLL2, |
| _PLL3, |
| _PLL4, |
| _PLL_NB |
| }; |
| |
| enum stm32mp1_div_id { |
| _DIV_P, |
| _DIV_Q, |
| _DIV_R, |
| _DIV_NB, |
| }; |
| |
| enum stm32mp1_clksrc_id { |
| CLKSRC_MPU, |
| CLKSRC_AXI, |
| CLKSRC_MCU, |
| CLKSRC_PLL12, |
| CLKSRC_PLL3, |
| CLKSRC_PLL4, |
| CLKSRC_RTC, |
| CLKSRC_MCO1, |
| CLKSRC_MCO2, |
| CLKSRC_NB |
| }; |
| |
| enum stm32mp1_clkdiv_id { |
| CLKDIV_MPU, |
| CLKDIV_AXI, |
| CLKDIV_MCU, |
| CLKDIV_APB1, |
| CLKDIV_APB2, |
| CLKDIV_APB3, |
| CLKDIV_APB4, |
| CLKDIV_APB5, |
| CLKDIV_RTC, |
| CLKDIV_MCO1, |
| CLKDIV_MCO2, |
| CLKDIV_NB |
| }; |
| |
| enum stm32mp1_pllcfg { |
| PLLCFG_M, |
| PLLCFG_N, |
| PLLCFG_P, |
| PLLCFG_Q, |
| PLLCFG_R, |
| PLLCFG_O, |
| PLLCFG_NB |
| }; |
| |
| enum stm32mp1_pllcsg { |
| PLLCSG_MOD_PER, |
| PLLCSG_INC_STEP, |
| PLLCSG_SSCG_MODE, |
| PLLCSG_NB |
| }; |
| |
| enum stm32mp1_plltype { |
| PLL_800, |
| PLL_1600, |
| PLL_TYPE_NB |
| }; |
| |
| struct stm32mp1_pll { |
| u8 refclk_min; |
| u8 refclk_max; |
| u8 divn_max; |
| }; |
| |
| struct stm32mp1_clk_gate { |
| u16 offset; |
| u8 bit; |
| u8 index; |
| u8 set_clr; |
| u8 sel; |
| u8 fixed; |
| }; |
| |
| struct stm32mp1_clk_sel { |
| u16 offset; |
| u8 src; |
| u8 msk; |
| u8 nb_parent; |
| const u8 *parent; |
| }; |
| |
| #define REFCLK_SIZE 4 |
| struct stm32mp1_clk_pll { |
| enum stm32mp1_plltype plltype; |
| u16 rckxselr; |
| u16 pllxcfgr1; |
| u16 pllxcfgr2; |
| u16 pllxfracr; |
| u16 pllxcr; |
| u16 pllxcsgr; |
| u8 refclk[REFCLK_SIZE]; |
| }; |
| |
| struct stm32mp1_clk_data { |
| const struct stm32mp1_clk_gate *gate; |
| const struct stm32mp1_clk_sel *sel; |
| const struct stm32mp1_clk_pll *pll; |
| const int nb_gate; |
| }; |
| |
| struct stm32mp1_clk_priv { |
| fdt_addr_t base; |
| const struct stm32mp1_clk_data *data; |
| struct clk osc_clk[NB_OSC]; |
| }; |
| |
| #define STM32MP1_CLK(off, b, idx, s) \ |
| { \ |
| .offset = (off), \ |
| .bit = (b), \ |
| .index = (idx), \ |
| .set_clr = 0, \ |
| .sel = (s), \ |
| .fixed = _UNKNOWN_ID, \ |
| } |
| |
| #define STM32MP1_CLK_F(off, b, idx, f) \ |
| { \ |
| .offset = (off), \ |
| .bit = (b), \ |
| .index = (idx), \ |
| .set_clr = 0, \ |
| .sel = _UNKNOWN_SEL, \ |
| .fixed = (f), \ |
| } |
| |
| #define STM32MP1_CLK_SET_CLR(off, b, idx, s) \ |
| { \ |
| .offset = (off), \ |
| .bit = (b), \ |
| .index = (idx), \ |
| .set_clr = 1, \ |
| .sel = (s), \ |
| .fixed = _UNKNOWN_ID, \ |
| } |
| |
| #define STM32MP1_CLK_SET_CLR_F(off, b, idx, f) \ |
| { \ |
| .offset = (off), \ |
| .bit = (b), \ |
| .index = (idx), \ |
| .set_clr = 1, \ |
| .sel = _UNKNOWN_SEL, \ |
| .fixed = (f), \ |
| } |
| |
| #define STM32MP1_CLK_PARENT(idx, off, s, m, p) \ |
| [(idx)] = { \ |
| .offset = (off), \ |
| .src = (s), \ |
| .msk = (m), \ |
| .parent = (p), \ |
| .nb_parent = ARRAY_SIZE((p)) \ |
| } |
| |
| #define STM32MP1_CLK_PLL(idx, type, off1, off2, off3, off4, off5, off6,\ |
| p1, p2, p3, p4) \ |
| [(idx)] = { \ |
| .plltype = (type), \ |
| .rckxselr = (off1), \ |
| .pllxcfgr1 = (off2), \ |
| .pllxcfgr2 = (off3), \ |
| .pllxfracr = (off4), \ |
| .pllxcr = (off5), \ |
| .pllxcsgr = (off6), \ |
| .refclk[0] = (p1), \ |
| .refclk[1] = (p2), \ |
| .refclk[2] = (p3), \ |
| .refclk[3] = (p4), \ |
| } |
| |
| static const u8 stm32mp1_clks[][2] = { |
| {CK_PER, _CK_PER}, |
| {CK_MPU, _CK_MPU}, |
| {CK_AXI, _ACLK}, |
| {CK_MCU, _CK_MCU}, |
| {CK_HSE, _HSE}, |
| {CK_CSI, _CSI}, |
| {CK_LSI, _LSI}, |
| {CK_LSE, _LSE}, |
| {CK_HSI, _HSI}, |
| {CK_HSE_DIV2, _HSE_KER_DIV2}, |
| }; |
| |
| static const struct stm32mp1_clk_gate stm32mp1_clk_gate[] = { |
| STM32MP1_CLK(RCC_DDRITFCR, 0, DDRC1, _UNKNOWN_SEL), |
| STM32MP1_CLK(RCC_DDRITFCR, 1, DDRC1LP, _UNKNOWN_SEL), |
| STM32MP1_CLK(RCC_DDRITFCR, 2, DDRC2, _UNKNOWN_SEL), |
| STM32MP1_CLK(RCC_DDRITFCR, 3, DDRC2LP, _UNKNOWN_SEL), |
| STM32MP1_CLK_F(RCC_DDRITFCR, 4, DDRPHYC, _PLL2_R), |
| STM32MP1_CLK(RCC_DDRITFCR, 5, DDRPHYCLP, _UNKNOWN_SEL), |
| STM32MP1_CLK(RCC_DDRITFCR, 6, DDRCAPB, _UNKNOWN_SEL), |
| STM32MP1_CLK(RCC_DDRITFCR, 7, DDRCAPBLP, _UNKNOWN_SEL), |
| STM32MP1_CLK(RCC_DDRITFCR, 8, AXIDCG, _UNKNOWN_SEL), |
| STM32MP1_CLK(RCC_DDRITFCR, 9, DDRPHYCAPB, _UNKNOWN_SEL), |
| STM32MP1_CLK(RCC_DDRITFCR, 10, DDRPHYCAPBLP, _UNKNOWN_SEL), |
| |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 11, SPI2_K, _SPI23_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 12, SPI3_K, _SPI23_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 14, USART2_K, _UART24_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 15, USART3_K, _UART35_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 16, UART4_K, _UART24_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 17, UART5_K, _UART35_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 18, UART7_K, _UART78_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 19, UART8_K, _UART78_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 21, I2C1_K, _I2C12_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 22, I2C2_K, _I2C12_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 23, I2C3_K, _I2C35_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 24, I2C5_K, _I2C35_SEL), |
| |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB2ENSETR, 8, SPI1_K, _SPI1_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB2ENSETR, 9, SPI4_K, _SPI45_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB2ENSETR, 10, SPI5_K, _SPI45_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB2ENSETR, 13, USART6_K, _UART6_SEL), |
| |
| STM32MP1_CLK_SET_CLR_F(RCC_MP_APB3ENSETR, 13, VREF, _PCLK3), |
| STM32MP1_CLK_SET_CLR_F(RCC_MP_APB3ENSETR, 11, SYSCFG, _UNKNOWN_SEL), |
| |
| STM32MP1_CLK_SET_CLR_F(RCC_MP_APB4ENSETR, 0, LTDC_PX, _PLL4_Q), |
| STM32MP1_CLK_SET_CLR_F(RCC_MP_APB4ENSETR, 4, DSI_PX, _PLL4_Q), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB4ENSETR, 4, DSI_K, _DSI_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB4ENSETR, 8, DDRPERFM, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB4ENSETR, 15, IWDG2, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB4ENSETR, 16, USBPHY_K, _USBPHY_SEL), |
| |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB5ENSETR, 0, SPI6_K, _SPI6_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB5ENSETR, 2, I2C4_K, _I2C46_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB5ENSETR, 3, I2C6_K, _I2C46_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB5ENSETR, 8, RTCAPB, _PCLK5), |
| STM32MP1_CLK_SET_CLR(RCC_MP_APB5ENSETR, 20, STGEN_K, _STGEN_SEL), |
| |
| STM32MP1_CLK_SET_CLR_F(RCC_MP_AHB2ENSETR, 5, ADC12, _HCLK2), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB2ENSETR, 5, ADC12_K, _ADC12_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB2ENSETR, 8, USBO_K, _USBO_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB2ENSETR, 16, SDMMC3_K, _SDMMC3_SEL), |
| |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB3ENSETR, 11, HSEM, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB3ENSETR, 12, IPCC, _UNKNOWN_SEL), |
| |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 0, GPIOA, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 1, GPIOB, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 2, GPIOC, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 3, GPIOD, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 4, GPIOE, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 5, GPIOF, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 6, GPIOG, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 7, GPIOH, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 8, GPIOI, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 9, GPIOJ, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 10, GPIOK, _UNKNOWN_SEL), |
| |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB5ENSETR, 0, GPIOZ, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB5ENSETR, 6, RNG1_K, _UNKNOWN_SEL), |
| |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 7, ETHCK_K, _ETH_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 8, ETHTX, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 9, ETHRX, _UNKNOWN_SEL), |
| STM32MP1_CLK_SET_CLR_F(RCC_MP_AHB6ENSETR, 10, ETHMAC, _ACLK), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 12, FMC_K, _FMC_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 14, QSPI_K, _QSPI_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 16, SDMMC1_K, _SDMMC12_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 17, SDMMC2_K, _SDMMC12_SEL), |
| STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 24, USBH, _UNKNOWN_SEL), |
| |
| STM32MP1_CLK(RCC_DBGCFGR, 8, CK_DBG, _UNKNOWN_SEL), |
| |
| STM32MP1_CLK(RCC_BDCR, 20, RTC, _RTC_SEL), |
| }; |
| |
| static const u8 i2c12_parents[] = {_PCLK1, _PLL4_R, _HSI_KER, _CSI_KER}; |
| static const u8 i2c35_parents[] = {_PCLK1, _PLL4_R, _HSI_KER, _CSI_KER}; |
| static const u8 i2c46_parents[] = {_PCLK5, _PLL3_Q, _HSI_KER, _CSI_KER}; |
| static const u8 uart6_parents[] = {_PCLK2, _PLL4_Q, _HSI_KER, _CSI_KER, |
| _HSE_KER}; |
| static const u8 uart24_parents[] = {_PCLK1, _PLL4_Q, _HSI_KER, _CSI_KER, |
| _HSE_KER}; |
| static const u8 uart35_parents[] = {_PCLK1, _PLL4_Q, _HSI_KER, _CSI_KER, |
| _HSE_KER}; |
| static const u8 uart78_parents[] = {_PCLK1, _PLL4_Q, _HSI_KER, _CSI_KER, |
| _HSE_KER}; |
| static const u8 sdmmc12_parents[] = {_HCLK6, _PLL3_R, _PLL4_P, _HSI_KER}; |
| static const u8 sdmmc3_parents[] = {_HCLK2, _PLL3_R, _PLL4_P, _HSI_KER}; |
| static const u8 eth_parents[] = {_PLL4_P, _PLL3_Q}; |
| static const u8 qspi_parents[] = {_ACLK, _PLL3_R, _PLL4_P, _CK_PER}; |
| static const u8 fmc_parents[] = {_ACLK, _PLL3_R, _PLL4_P, _CK_PER}; |
| static const u8 usbphy_parents[] = {_HSE_KER, _PLL4_R, _HSE_KER_DIV2}; |
| static const u8 usbo_parents[] = {_PLL4_R, _USB_PHY_48}; |
| static const u8 stgen_parents[] = {_HSI_KER, _HSE_KER}; |
| static const u8 dsi_parents[] = {_DSI_PHY, _PLL4_P}; |
| static const u8 adc_parents[] = {_PLL4_R, _CK_PER, _PLL3_Q}; |
| /* same parents for SPI1=RCC_SPI2S1CKSELR and SPI2&3 = RCC_SPI2S23CKSELR */ |
| static const u8 spi_parents[] = {_PLL4_P, _PLL3_Q, _I2S_CKIN, _CK_PER, |
| _PLL3_R}; |
| static const u8 spi45_parents[] = {_PCLK2, _PLL4_Q, _HSI_KER, _CSI_KER, |
| _HSE_KER}; |
| static const u8 spi6_parents[] = {_PCLK5, _PLL4_Q, _HSI_KER, _CSI_KER, |
| _HSE_KER, _PLL3_Q}; |
| static const u8 rtc_parents[] = {_UNKNOWN_ID, _LSE, _LSI, _HSE}; |
| |
| static const struct stm32mp1_clk_sel stm32mp1_clk_sel[_PARENT_SEL_NB] = { |
| STM32MP1_CLK_PARENT(_I2C12_SEL, RCC_I2C12CKSELR, 0, 0x7, i2c12_parents), |
| STM32MP1_CLK_PARENT(_I2C35_SEL, RCC_I2C35CKSELR, 0, 0x7, i2c35_parents), |
| STM32MP1_CLK_PARENT(_I2C46_SEL, RCC_I2C46CKSELR, 0, 0x7, i2c46_parents), |
| STM32MP1_CLK_PARENT(_UART6_SEL, RCC_UART6CKSELR, 0, 0x7, uart6_parents), |
| STM32MP1_CLK_PARENT(_UART24_SEL, RCC_UART24CKSELR, 0, 0x7, |
| uart24_parents), |
| STM32MP1_CLK_PARENT(_UART35_SEL, RCC_UART35CKSELR, 0, 0x7, |
| uart35_parents), |
| STM32MP1_CLK_PARENT(_UART78_SEL, RCC_UART78CKSELR, 0, 0x7, |
| uart78_parents), |
| STM32MP1_CLK_PARENT(_SDMMC12_SEL, RCC_SDMMC12CKSELR, 0, 0x7, |
| sdmmc12_parents), |
| STM32MP1_CLK_PARENT(_SDMMC3_SEL, RCC_SDMMC3CKSELR, 0, 0x7, |
| sdmmc3_parents), |
| STM32MP1_CLK_PARENT(_ETH_SEL, RCC_ETHCKSELR, 0, 0x3, eth_parents), |
| STM32MP1_CLK_PARENT(_QSPI_SEL, RCC_QSPICKSELR, 0, 0x3, qspi_parents), |
| STM32MP1_CLK_PARENT(_FMC_SEL, RCC_FMCCKSELR, 0, 0x3, fmc_parents), |
| STM32MP1_CLK_PARENT(_USBPHY_SEL, RCC_USBCKSELR, 0, 0x3, usbphy_parents), |
| STM32MP1_CLK_PARENT(_USBO_SEL, RCC_USBCKSELR, 4, 0x1, usbo_parents), |
| STM32MP1_CLK_PARENT(_STGEN_SEL, RCC_STGENCKSELR, 0, 0x3, stgen_parents), |
| STM32MP1_CLK_PARENT(_DSI_SEL, RCC_DSICKSELR, 0, 0x1, dsi_parents), |
| STM32MP1_CLK_PARENT(_ADC12_SEL, RCC_ADCCKSELR, 0, 0x3, adc_parents), |
| STM32MP1_CLK_PARENT(_SPI1_SEL, RCC_SPI2S1CKSELR, 0, 0x7, spi_parents), |
| STM32MP1_CLK_PARENT(_SPI23_SEL, RCC_SPI2S23CKSELR, 0, 0x7, spi_parents), |
| STM32MP1_CLK_PARENT(_SPI45_SEL, RCC_SPI45CKSELR, 0, 0x7, spi45_parents), |
| STM32MP1_CLK_PARENT(_SPI6_SEL, RCC_SPI6CKSELR, 0, 0x7, spi6_parents), |
| STM32MP1_CLK_PARENT(_RTC_SEL, RCC_BDCR, RCC_BDCR_RTCSRC_SHIFT, |
| (RCC_BDCR_RTCSRC_MASK >> RCC_BDCR_RTCSRC_SHIFT), |
| rtc_parents), |
| }; |
| |
| #ifdef STM32MP1_CLOCK_TREE_INIT |
| |
| /* define characteristic of PLL according type */ |
| #define DIVM_MIN 0 |
| #define DIVM_MAX 63 |
| #define DIVN_MIN 24 |
| #define DIVP_MIN 0 |
| #define DIVP_MAX 127 |
| #define FRAC_MAX 8192 |
| |
| #define PLL1600_VCO_MIN 800000000 |
| #define PLL1600_VCO_MAX 1600000000 |
| |
| static const struct stm32mp1_pll stm32mp1_pll[PLL_TYPE_NB] = { |
| [PLL_800] = { |
| .refclk_min = 4, |
| .refclk_max = 16, |
| .divn_max = 99, |
| }, |
| [PLL_1600] = { |
| .refclk_min = 8, |
| .refclk_max = 16, |
| .divn_max = 199, |
| }, |
| }; |
| #endif /* STM32MP1_CLOCK_TREE_INIT */ |
| |
| static const struct stm32mp1_clk_pll stm32mp1_clk_pll[_PLL_NB] = { |
| STM32MP1_CLK_PLL(_PLL1, PLL_1600, |
| RCC_RCK12SELR, RCC_PLL1CFGR1, RCC_PLL1CFGR2, |
| RCC_PLL1FRACR, RCC_PLL1CR, RCC_PLL1CSGR, |
| _HSI, _HSE, _UNKNOWN_ID, _UNKNOWN_ID), |
| STM32MP1_CLK_PLL(_PLL2, PLL_1600, |
| RCC_RCK12SELR, RCC_PLL2CFGR1, RCC_PLL2CFGR2, |
| RCC_PLL2FRACR, RCC_PLL2CR, RCC_PLL2CSGR, |
| _HSI, _HSE, _UNKNOWN_ID, _UNKNOWN_ID), |
| STM32MP1_CLK_PLL(_PLL3, PLL_800, |
| RCC_RCK3SELR, RCC_PLL3CFGR1, RCC_PLL3CFGR2, |
| RCC_PLL3FRACR, RCC_PLL3CR, RCC_PLL3CSGR, |
| _HSI, _HSE, _CSI, _UNKNOWN_ID), |
| STM32MP1_CLK_PLL(_PLL4, PLL_800, |
| RCC_RCK4SELR, RCC_PLL4CFGR1, RCC_PLL4CFGR2, |
| RCC_PLL4FRACR, RCC_PLL4CR, RCC_PLL4CSGR, |
| _HSI, _HSE, _CSI, _I2S_CKIN), |
| }; |
| |
| /* Prescaler table lookups for clock computation */ |
| /* div = /1 /2 /4 /8 / 16 /64 /128 /512 */ |
| static const u8 stm32mp1_mcu_div[16] = { |
| 0, 1, 2, 3, 4, 6, 7, 8, 9, 9, 9, 9, 9, 9, 9, 9 |
| }; |
| |
| /* div = /1 /2 /4 /8 /16 : same divider for pmu and apbx*/ |
| #define stm32mp1_mpu_div stm32mp1_mpu_apbx_div |
| #define stm32mp1_apbx_div stm32mp1_mpu_apbx_div |
| static const u8 stm32mp1_mpu_apbx_div[8] = { |
| 0, 1, 2, 3, 4, 4, 4, 4 |
| }; |
| |
| /* div = /1 /2 /3 /4 */ |
| static const u8 stm32mp1_axi_div[8] = { |
| 1, 2, 3, 4, 4, 4, 4, 4 |
| }; |
| |
| static const __maybe_unused |
| char * const stm32mp1_clk_parent_name[_PARENT_NB] = { |
| [_HSI] = "HSI", |
| [_HSE] = "HSE", |
| [_CSI] = "CSI", |
| [_LSI] = "LSI", |
| [_LSE] = "LSE", |
| [_I2S_CKIN] = "I2S_CKIN", |
| [_HSI_KER] = "HSI_KER", |
| [_HSE_KER] = "HSE_KER", |
| [_HSE_KER_DIV2] = "HSE_KER_DIV2", |
| [_CSI_KER] = "CSI_KER", |
| [_PLL1_P] = "PLL1_P", |
| [_PLL1_Q] = "PLL1_Q", |
| [_PLL1_R] = "PLL1_R", |
| [_PLL2_P] = "PLL2_P", |
| [_PLL2_Q] = "PLL2_Q", |
| [_PLL2_R] = "PLL2_R", |
| [_PLL3_P] = "PLL3_P", |
| [_PLL3_Q] = "PLL3_Q", |
| [_PLL3_R] = "PLL3_R", |
| [_PLL4_P] = "PLL4_P", |
| [_PLL4_Q] = "PLL4_Q", |
| [_PLL4_R] = "PLL4_R", |
| [_ACLK] = "ACLK", |
| [_PCLK1] = "PCLK1", |
| [_PCLK2] = "PCLK2", |
| [_PCLK3] = "PCLK3", |
| [_PCLK4] = "PCLK4", |
| [_PCLK5] = "PCLK5", |
| [_HCLK6] = "KCLK6", |
| [_HCLK2] = "HCLK2", |
| [_CK_PER] = "CK_PER", |
| [_CK_MPU] = "CK_MPU", |
| [_CK_MCU] = "CK_MCU", |
| [_USB_PHY_48] = "USB_PHY_48", |
| [_DSI_PHY] = "DSI_PHY_PLL", |
| }; |
| |
| static const __maybe_unused |
| char * const stm32mp1_clk_parent_sel_name[_PARENT_SEL_NB] = { |
| [_I2C12_SEL] = "I2C12", |
| [_I2C35_SEL] = "I2C35", |
| [_I2C46_SEL] = "I2C46", |
| [_UART6_SEL] = "UART6", |
| [_UART24_SEL] = "UART24", |
| [_UART35_SEL] = "UART35", |
| [_UART78_SEL] = "UART78", |
| [_SDMMC12_SEL] = "SDMMC12", |
| [_SDMMC3_SEL] = "SDMMC3", |
| [_ETH_SEL] = "ETH", |
| [_QSPI_SEL] = "QSPI", |
| [_FMC_SEL] = "FMC", |
| [_USBPHY_SEL] = "USBPHY", |
| [_USBO_SEL] = "USBO", |
| [_STGEN_SEL] = "STGEN", |
| [_DSI_SEL] = "DSI", |
| [_ADC12_SEL] = "ADC12", |
| [_SPI1_SEL] = "SPI1", |
| [_SPI45_SEL] = "SPI45", |
| [_RTC_SEL] = "RTC", |
| }; |
| |
| static const struct stm32mp1_clk_data stm32mp1_data = { |
| .gate = stm32mp1_clk_gate, |
| .sel = stm32mp1_clk_sel, |
| .pll = stm32mp1_clk_pll, |
| .nb_gate = ARRAY_SIZE(stm32mp1_clk_gate), |
| }; |
| |
| static ulong stm32mp1_clk_get_fixed(struct stm32mp1_clk_priv *priv, int idx) |
| { |
| if (idx >= NB_OSC) { |
| log_debug("clk id %d not found\n", idx); |
| return 0; |
| } |
| |
| return clk_get_rate(&priv->osc_clk[idx]); |
| } |
| |
| static int stm32mp1_clk_get_id(struct stm32mp1_clk_priv *priv, unsigned long id) |
| { |
| const struct stm32mp1_clk_gate *gate = priv->data->gate; |
| int i, nb_clks = priv->data->nb_gate; |
| |
| for (i = 0; i < nb_clks; i++) { |
| if (gate[i].index == id) |
| break; |
| } |
| |
| if (i == nb_clks) { |
| log_err("clk id %d not found\n", (u32)id); |
| return -EINVAL; |
| } |
| |
| return i; |
| } |
| |
| static int stm32mp1_clk_get_sel(struct stm32mp1_clk_priv *priv, |
| int i) |
| { |
| const struct stm32mp1_clk_gate *gate = priv->data->gate; |
| |
| if (gate[i].sel > _PARENT_SEL_NB) { |
| log_err("parents for clk id %d not found\n", i); |
| return -EINVAL; |
| } |
| |
| return gate[i].sel; |
| } |
| |
| static int stm32mp1_clk_get_fixed_parent(struct stm32mp1_clk_priv *priv, |
| int i) |
| { |
| const struct stm32mp1_clk_gate *gate = priv->data->gate; |
| |
| if (gate[i].fixed == _UNKNOWN_ID) |
| return -ENOENT; |
| |
| return gate[i].fixed; |
| } |
| |
| static int stm32mp1_clk_get_parent(struct stm32mp1_clk_priv *priv, |
| unsigned long id) |
| { |
| const struct stm32mp1_clk_sel *sel = priv->data->sel; |
| int i; |
| int s, p; |
| unsigned int idx; |
| |
| for (idx = 0; idx < ARRAY_SIZE(stm32mp1_clks); idx++) |
| if (stm32mp1_clks[idx][0] == id) |
| return stm32mp1_clks[idx][1]; |
| |
| i = stm32mp1_clk_get_id(priv, id); |
| if (i < 0) |
| return i; |
| |
| p = stm32mp1_clk_get_fixed_parent(priv, i); |
| if (p >= 0 && p < _PARENT_NB) |
| return p; |
| |
| s = stm32mp1_clk_get_sel(priv, i); |
| if (s < 0) |
| return s; |
| |
| p = (readl(priv->base + sel[s].offset) >> sel[s].src) & sel[s].msk; |
| |
| if (p < sel[s].nb_parent) { |
| log_content("%s clock is the parent %s of clk id %d\n", |
| stm32mp1_clk_parent_name[sel[s].parent[p]], |
| stm32mp1_clk_parent_sel_name[s], |
| (u32)id); |
| return sel[s].parent[p]; |
| } |
| |
| log_err("no parents defined for clk id %d\n", (u32)id); |
| |
| return -EINVAL; |
| } |
| |
| static ulong pll_get_fref_ck(struct stm32mp1_clk_priv *priv, |
| int pll_id) |
| { |
| const struct stm32mp1_clk_pll *pll = priv->data->pll; |
| u32 selr; |
| int src; |
| ulong refclk; |
| |
| /* Get current refclk */ |
| selr = readl(priv->base + pll[pll_id].rckxselr); |
| src = selr & RCC_SELR_SRC_MASK; |
| |
| refclk = stm32mp1_clk_get_fixed(priv, pll[pll_id].refclk[src]); |
| |
| return refclk; |
| } |
| |
| /* |
| * pll_get_fvco() : return the VCO or (VCO / 2) frequency for the requested PLL |
| * - PLL1 & PLL2 => return VCO / 2 with Fpll_y_ck = FVCO / 2 * (DIVy + 1) |
| * - PLL3 & PLL4 => return VCO with Fpll_y_ck = FVCO / (DIVy + 1) |
| * => in all the case Fpll_y_ck = pll_get_fvco() / (DIVy + 1) |
| */ |
| static ulong pll_get_fvco(struct stm32mp1_clk_priv *priv, |
| int pll_id) |
| { |
| const struct stm32mp1_clk_pll *pll = priv->data->pll; |
| int divm, divn; |
| ulong refclk, fvco; |
| u32 cfgr1, fracr; |
| |
| cfgr1 = readl(priv->base + pll[pll_id].pllxcfgr1); |
| fracr = readl(priv->base + pll[pll_id].pllxfracr); |
| |
| divm = (cfgr1 & (RCC_PLLNCFGR1_DIVM_MASK)) >> RCC_PLLNCFGR1_DIVM_SHIFT; |
| divn = cfgr1 & RCC_PLLNCFGR1_DIVN_MASK; |
| |
| refclk = pll_get_fref_ck(priv, pll_id); |
| |
| /* with FRACV : |
| * Fvco = Fck_ref * ((DIVN + 1) + FRACV / 2^13) / (DIVM + 1) |
| * without FRACV |
| * Fvco = Fck_ref * ((DIVN + 1) / (DIVM + 1) |
| */ |
| if (fracr & RCC_PLLNFRACR_FRACLE) { |
| u32 fracv = (fracr & RCC_PLLNFRACR_FRACV_MASK) |
| >> RCC_PLLNFRACR_FRACV_SHIFT; |
| fvco = (ulong)lldiv((unsigned long long)refclk * |
| (((divn + 1) << 13) + fracv), |
| ((unsigned long long)(divm + 1)) << 13); |
| } else { |
| fvco = (ulong)(refclk * (divn + 1) / (divm + 1)); |
| } |
| |
| return fvco; |
| } |
| |
| static ulong stm32mp1_read_pll_freq(struct stm32mp1_clk_priv *priv, |
| int pll_id, int div_id) |
| { |
| const struct stm32mp1_clk_pll *pll = priv->data->pll; |
| int divy; |
| ulong dfout; |
| u32 cfgr2; |
| |
| if (div_id >= _DIV_NB) |
| return 0; |
| |
| cfgr2 = readl(priv->base + pll[pll_id].pllxcfgr2); |
| divy = (cfgr2 >> RCC_PLLNCFGR2_SHIFT(div_id)) & RCC_PLLNCFGR2_DIVX_MASK; |
| |
| dfout = pll_get_fvco(priv, pll_id) / (divy + 1); |
| |
| return dfout; |
| } |
| |
| static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p) |
| { |
| u32 reg; |
| ulong clock = 0; |
| |
| switch (p) { |
| case _CK_MPU: |
| /* MPU sub system */ |
| reg = readl(priv->base + RCC_MPCKSELR); |
| switch (reg & RCC_SELR_SRC_MASK) { |
| case RCC_MPCKSELR_HSI: |
| clock = stm32mp1_clk_get_fixed(priv, _HSI); |
| break; |
| case RCC_MPCKSELR_HSE: |
| clock = stm32mp1_clk_get_fixed(priv, _HSE); |
| break; |
| case RCC_MPCKSELR_PLL: |
| case RCC_MPCKSELR_PLL_MPUDIV: |
| clock = stm32mp1_read_pll_freq(priv, _PLL1, _DIV_P); |
| if ((reg & RCC_SELR_SRC_MASK) == |
| RCC_MPCKSELR_PLL_MPUDIV) { |
| reg = readl(priv->base + RCC_MPCKDIVR); |
| clock >>= stm32mp1_mpu_div[reg & |
| RCC_MPUDIV_MASK]; |
| } |
| break; |
| } |
| break; |
| /* AXI sub system */ |
| case _ACLK: |
| case _HCLK2: |
| case _HCLK6: |
| case _PCLK4: |
| case _PCLK5: |
| reg = readl(priv->base + RCC_ASSCKSELR); |
| switch (reg & RCC_SELR_SRC_MASK) { |
| case RCC_ASSCKSELR_HSI: |
| clock = stm32mp1_clk_get_fixed(priv, _HSI); |
| break; |
| case RCC_ASSCKSELR_HSE: |
| clock = stm32mp1_clk_get_fixed(priv, _HSE); |
| break; |
| case RCC_ASSCKSELR_PLL: |
| clock = stm32mp1_read_pll_freq(priv, _PLL2, _DIV_P); |
| break; |
| } |
| |
| /* System clock divider */ |
| reg = readl(priv->base + RCC_AXIDIVR); |
| clock /= stm32mp1_axi_div[reg & RCC_AXIDIV_MASK]; |
| |
| switch (p) { |
| case _PCLK4: |
| reg = readl(priv->base + RCC_APB4DIVR); |
| clock >>= stm32mp1_apbx_div[reg & RCC_APBXDIV_MASK]; |
| break; |
| case _PCLK5: |
| reg = readl(priv->base + RCC_APB5DIVR); |
| clock >>= stm32mp1_apbx_div[reg & RCC_APBXDIV_MASK]; |
| break; |
| default: |
| break; |
| } |
| break; |
| /* MCU sub system */ |
| case _CK_MCU: |
| case _PCLK1: |
| case _PCLK2: |
| case _PCLK3: |
| reg = readl(priv->base + RCC_MSSCKSELR); |
| switch (reg & RCC_SELR_SRC_MASK) { |
| case RCC_MSSCKSELR_HSI: |
| clock = stm32mp1_clk_get_fixed(priv, _HSI); |
| break; |
| case RCC_MSSCKSELR_HSE: |
| clock = stm32mp1_clk_get_fixed(priv, _HSE); |
| break; |
| case RCC_MSSCKSELR_CSI: |
| clock = stm32mp1_clk_get_fixed(priv, _CSI); |
| break; |
| case RCC_MSSCKSELR_PLL: |
| clock = stm32mp1_read_pll_freq(priv, _PLL3, _DIV_P); |
| break; |
| } |
| |
| /* MCU clock divider */ |
| reg = readl(priv->base + RCC_MCUDIVR); |
| clock >>= stm32mp1_mcu_div[reg & RCC_MCUDIV_MASK]; |
| |
| switch (p) { |
| case _PCLK1: |
| reg = readl(priv->base + RCC_APB1DIVR); |
| clock >>= stm32mp1_apbx_div[reg & RCC_APBXDIV_MASK]; |
| break; |
| case _PCLK2: |
| reg = readl(priv->base + RCC_APB2DIVR); |
| clock >>= stm32mp1_apbx_div[reg & RCC_APBXDIV_MASK]; |
| break; |
| case _PCLK3: |
| reg = readl(priv->base + RCC_APB3DIVR); |
| clock >>= stm32mp1_apbx_div[reg & RCC_APBXDIV_MASK]; |
| break; |
| case _CK_MCU: |
| default: |
| break; |
| } |
| break; |
| case _CK_PER: |
| reg = readl(priv->base + RCC_CPERCKSELR); |
| switch (reg & RCC_SELR_SRC_MASK) { |
| case RCC_CPERCKSELR_HSI: |
| clock = stm32mp1_clk_get_fixed(priv, _HSI); |
| break; |
| case RCC_CPERCKSELR_HSE: |
| clock = stm32mp1_clk_get_fixed(priv, _HSE); |
| break; |
| case RCC_CPERCKSELR_CSI: |
| clock = stm32mp1_clk_get_fixed(priv, _CSI); |
| break; |
| } |
| break; |
| case _HSI: |
| case _HSI_KER: |
| clock = stm32mp1_clk_get_fixed(priv, _HSI); |
| break; |
| case _CSI: |
| case _CSI_KER: |
| clock = stm32mp1_clk_get_fixed(priv, _CSI); |
| break; |
| case _HSE: |
| case _HSE_KER: |
| case _HSE_KER_DIV2: |
| clock = stm32mp1_clk_get_fixed(priv, _HSE); |
| if (p == _HSE_KER_DIV2) |
| clock >>= 1; |
| break; |
| case _LSI: |
| clock = stm32mp1_clk_get_fixed(priv, _LSI); |
| break; |
| case _LSE: |
| clock = stm32mp1_clk_get_fixed(priv, _LSE); |
| break; |
| /* PLL */ |
| case _PLL1_P: |
| case _PLL1_Q: |
| case _PLL1_R: |
| clock = stm32mp1_read_pll_freq(priv, _PLL1, p - _PLL1_P); |
| break; |
| case _PLL2_P: |
| case _PLL2_Q: |
| case _PLL2_R: |
| clock = stm32mp1_read_pll_freq(priv, _PLL2, p - _PLL2_P); |
| break; |
| case _PLL3_P: |
| case _PLL3_Q: |
| case _PLL3_R: |
| clock = stm32mp1_read_pll_freq(priv, _PLL3, p - _PLL3_P); |
| break; |
| case _PLL4_P: |
| case _PLL4_Q: |
| case _PLL4_R: |
| clock = stm32mp1_read_pll_freq(priv, _PLL4, p - _PLL4_P); |
| break; |
| /* other */ |
| case _USB_PHY_48: |
| clock = 48000000; |
| break; |
| case _DSI_PHY: |
| { |
| struct clk clk; |
| struct udevice *dev = NULL; |
| |
| if (!uclass_get_device_by_name(UCLASS_CLK, "ck_dsi_phy", |
| &dev)) { |
| if (clk_request(dev, &clk)) { |
| log_err("ck_dsi_phy request"); |
| } else { |
| clk.id = 0; |
| clock = clk_get_rate(&clk); |
| } |
| } |
| break; |
| } |
| default: |
| break; |
| } |
| |
| log_debug("id=%d clock = %lx : %ld kHz\n", p, clock, clock / 1000); |
| |
| return clock; |
| } |
| |
| static int stm32mp1_clk_enable(struct clk *clk) |
| { |
| struct stm32mp1_clk_priv *priv = dev_get_priv(clk->dev); |
| const struct stm32mp1_clk_gate *gate = priv->data->gate; |
| int i = stm32mp1_clk_get_id(priv, clk->id); |
| |
| if (i < 0) |
| return i; |
| |
| if (gate[i].set_clr) |
| writel(BIT(gate[i].bit), priv->base + gate[i].offset); |
| else |
| setbits_le32(priv->base + gate[i].offset, BIT(gate[i].bit)); |
| |
| dev_dbg(clk->dev, "%s: id clock %d has been enabled\n", __func__, (u32)clk->id); |
| |
| return 0; |
| } |
| |
| static int stm32mp1_clk_disable(struct clk *clk) |
| { |
| struct stm32mp1_clk_priv *priv = dev_get_priv(clk->dev); |
| const struct stm32mp1_clk_gate *gate = priv->data->gate; |
| int i = stm32mp1_clk_get_id(priv, clk->id); |
| |
| if (i < 0) |
| return i; |
| |
| if (gate[i].set_clr) |
| writel(BIT(gate[i].bit), |
| priv->base + gate[i].offset |
| + RCC_MP_ENCLRR_OFFSET); |
| else |
| clrbits_le32(priv->base + gate[i].offset, BIT(gate[i].bit)); |
| |
| dev_dbg(clk->dev, "%s: id clock %d has been disabled\n", __func__, (u32)clk->id); |
| |
| return 0; |
| } |
| |
| static ulong stm32mp1_clk_get_rate(struct clk *clk) |
| { |
| struct stm32mp1_clk_priv *priv = dev_get_priv(clk->dev); |
| int p = stm32mp1_clk_get_parent(priv, clk->id); |
| ulong rate; |
| |
| if (p < 0) |
| return 0; |
| |
| rate = stm32mp1_clk_get(priv, p); |
| |
| dev_vdbg(clk->dev, "computed rate for id clock %d is %d (parent is %s)\n", |
| (u32)clk->id, (u32)rate, stm32mp1_clk_parent_name[p]); |
| |
| return rate; |
| } |
| |
| #ifdef STM32MP1_CLOCK_TREE_INIT |
| |
| bool stm32mp1_supports_opp(u32 opp_id, u32 cpu_type) |
| { |
| unsigned int id; |
| |
| switch (opp_id) { |
| case 1: |
| case 2: |
| id = opp_id; |
| break; |
| default: |
| id = 1; /* default value */ |
| break; |
| } |
| |
| switch (cpu_type) { |
| case CPU_STM32MP157Fxx: |
| case CPU_STM32MP157Dxx: |
| case CPU_STM32MP153Fxx: |
| case CPU_STM32MP153Dxx: |
| case CPU_STM32MP151Fxx: |
| case CPU_STM32MP151Dxx: |
| return true; |
| default: |
| return id == 1; |
| } |
| } |
| |
| __weak void board_vddcore_init(u32 voltage_mv) |
| { |
| } |
| |
| /* |
| * gets OPP parameters (frequency in KHz and voltage in mV) from |
| * an OPP table subnode. Platform HW support capabilities are also checked. |
| * Returns 0 on success and a negative FDT error code on failure. |
| */ |
| static int stm32mp1_get_opp(u32 cpu_type, ofnode subnode, |
| u32 *freq_khz, u32 *voltage_mv) |
| { |
| u32 opp_hw; |
| u64 read_freq_64; |
| u32 read_voltage_32; |
| |
| *freq_khz = 0; |
| *voltage_mv = 0; |
| |
| opp_hw = ofnode_read_u32_default(subnode, "opp-supported-hw", 0); |
| if (opp_hw) |
| if (!stm32mp1_supports_opp(opp_hw, cpu_type)) |
| return -FDT_ERR_BADVALUE; |
| |
| read_freq_64 = ofnode_read_u64_default(subnode, "opp-hz", 0) / |
| 1000ULL; |
| read_voltage_32 = ofnode_read_u32_default(subnode, "opp-microvolt", 0) / |
| 1000U; |
| |
| if (!read_voltage_32 || !read_freq_64) |
| return -FDT_ERR_NOTFOUND; |
| |
| /* Frequency value expressed in KHz must fit on 32 bits */ |
| if (read_freq_64 > U32_MAX) |
| return -FDT_ERR_BADVALUE; |
| |
| /* Millivolt value must fit on 16 bits */ |
| if (read_voltage_32 > U16_MAX) |
| return -FDT_ERR_BADVALUE; |
| |
| *freq_khz = (u32)read_freq_64; |
| *voltage_mv = read_voltage_32; |
| |
| return 0; |
| } |
| |
| /* |
| * parses OPP table in DT and finds the parameters for the |
| * highest frequency supported by the HW platform. |
| * Returns 0 on success and a negative FDT error code on failure. |
| */ |
| int stm32mp1_get_max_opp_freq(struct stm32mp1_clk_priv *priv, u64 *freq_hz) |
| { |
| ofnode node, subnode; |
| int ret; |
| u32 freq = 0U, voltage = 0U; |
| u32 cpu_type = get_cpu_type(); |
| |
| node = ofnode_by_compatible(ofnode_null(), "operating-points-v2"); |
| if (!ofnode_valid(node)) |
| return -FDT_ERR_NOTFOUND; |
| |
| ofnode_for_each_subnode(subnode, node) { |
| unsigned int read_freq; |
| unsigned int read_voltage; |
| |
| ret = stm32mp1_get_opp(cpu_type, subnode, |
| &read_freq, &read_voltage); |
| if (ret) |
| continue; |
| |
| if (read_freq > freq) { |
| freq = read_freq; |
| voltage = read_voltage; |
| } |
| } |
| |
| if (!freq || !voltage) |
| return -FDT_ERR_NOTFOUND; |
| |
| *freq_hz = (u64)1000U * freq; |
| board_vddcore_init(voltage); |
| |
| return 0; |
| } |
| |
| static int stm32mp1_pll1_opp(struct stm32mp1_clk_priv *priv, int clksrc, |
| u32 *pllcfg, u32 *fracv) |
| { |
| u32 post_divm; |
| u32 input_freq; |
| u64 output_freq; |
| u64 freq; |
| u64 vco; |
| u32 divm, divn, divp, frac; |
| int i, ret; |
| u32 diff; |
| u32 best_diff = U32_MAX; |
| |
| /* PLL1 is 1600 */ |
| const u32 DIVN_MAX = stm32mp1_pll[PLL_1600].divn_max; |
| const u32 POST_DIVM_MIN = stm32mp1_pll[PLL_1600].refclk_min * 1000000U; |
| const u32 POST_DIVM_MAX = stm32mp1_pll[PLL_1600].refclk_max * 1000000U; |
| |
| ret = stm32mp1_get_max_opp_freq(priv, &output_freq); |
| if (ret) { |
| log_debug("PLL1 OPP configuration not found (%d).\n", ret); |
| return ret; |
| } |
| |
| switch (clksrc) { |
| case CLK_PLL12_HSI: |
| input_freq = stm32mp1_clk_get_fixed(priv, _HSI); |
| break; |
| case CLK_PLL12_HSE: |
| input_freq = stm32mp1_clk_get_fixed(priv, _HSE); |
| break; |
| default: |
| return -EINTR; |
| } |
| |
| /* Following parameters have always the same value */ |
| pllcfg[PLLCFG_Q] = 0; |
| pllcfg[PLLCFG_R] = 0; |
| pllcfg[PLLCFG_O] = PQR(1, 0, 0); |
| |
| for (divm = DIVM_MAX; divm >= DIVM_MIN; divm--) { |
| post_divm = (u32)(input_freq / (divm + 1)); |
| if (post_divm < POST_DIVM_MIN || post_divm > POST_DIVM_MAX) |
| continue; |
| |
| for (divp = DIVP_MIN; divp <= DIVP_MAX; divp++) { |
| freq = output_freq * (divm + 1) * (divp + 1); |
| divn = (u32)((freq / input_freq) - 1); |
| if (divn < DIVN_MIN || divn > DIVN_MAX) |
| continue; |
| |
| frac = (u32)(((freq * FRAC_MAX) / input_freq) - |
| ((divn + 1) * FRAC_MAX)); |
| /* 2 loops to refine the fractional part */ |
| for (i = 2; i != 0; i--) { |
| if (frac > FRAC_MAX) |
| break; |
| |
| vco = (post_divm * (divn + 1)) + |
| ((post_divm * (u64)frac) / |
| FRAC_MAX); |
| if (vco < (PLL1600_VCO_MIN / 2) || |
| vco > (PLL1600_VCO_MAX / 2)) { |
| frac++; |
| continue; |
| } |
| freq = vco / (divp + 1); |
| if (output_freq < freq) |
| diff = (u32)(freq - output_freq); |
| else |
| diff = (u32)(output_freq - freq); |
| if (diff < best_diff) { |
| pllcfg[PLLCFG_M] = divm; |
| pllcfg[PLLCFG_N] = divn; |
| pllcfg[PLLCFG_P] = divp; |
| *fracv = frac; |
| |
| if (diff == 0) |
| return 0; |
| |
| best_diff = diff; |
| } |
| frac++; |
| } |
| } |
| } |
| |
| if (best_diff == U32_MAX) |
| return -1; |
| |
| return 0; |
| } |
| |
| static void stm32mp1_ls_osc_set(int enable, fdt_addr_t rcc, u32 offset, |
| u32 mask_on) |
| { |
| u32 address = rcc + offset; |
| |
| if (enable) |
| setbits_le32(address, mask_on); |
| else |
| clrbits_le32(address, mask_on); |
| } |
| |
| static void stm32mp1_hs_ocs_set(int enable, fdt_addr_t rcc, u32 mask_on) |
| { |
| writel(mask_on, rcc + (enable ? RCC_OCENSETR : RCC_OCENCLRR)); |
| } |
| |
| static int stm32mp1_osc_wait(int enable, fdt_addr_t rcc, u32 offset, |
| u32 mask_rdy) |
| { |
| u32 mask_test = 0; |
| u32 address = rcc + offset; |
| u32 val; |
| int ret; |
| |
| if (enable) |
| mask_test = mask_rdy; |
| |
| ret = readl_poll_timeout(address, val, |
| (val & mask_rdy) == mask_test, |
| TIMEOUT_1S); |
| |
| if (ret) |
| log_err("OSC %x @ %x timeout for enable=%d : 0x%x\n", |
| mask_rdy, address, enable, readl(address)); |
| |
| return ret; |
| } |
| |
| static void stm32mp1_lse_enable(fdt_addr_t rcc, int bypass, int digbyp, |
| u32 lsedrv) |
| { |
| u32 value; |
| |
| if (digbyp) |
| setbits_le32(rcc + RCC_BDCR, RCC_BDCR_DIGBYP); |
| |
| if (bypass || digbyp) |
| setbits_le32(rcc + RCC_BDCR, RCC_BDCR_LSEBYP); |
| |
| /* |
| * warning: not recommended to switch directly from "high drive" |
| * to "medium low drive", and vice-versa. |
| */ |
| value = (readl(rcc + RCC_BDCR) & RCC_BDCR_LSEDRV_MASK) |
| >> RCC_BDCR_LSEDRV_SHIFT; |
| |
| while (value != lsedrv) { |
| if (value > lsedrv) |
| value--; |
| else |
| value++; |
| |
| clrsetbits_le32(rcc + RCC_BDCR, |
| RCC_BDCR_LSEDRV_MASK, |
| value << RCC_BDCR_LSEDRV_SHIFT); |
| } |
| |
| stm32mp1_ls_osc_set(1, rcc, RCC_BDCR, RCC_BDCR_LSEON); |
| } |
| |
| static void stm32mp1_lse_wait(fdt_addr_t rcc) |
| { |
| stm32mp1_osc_wait(1, rcc, RCC_BDCR, RCC_BDCR_LSERDY); |
| } |
| |
| static void stm32mp1_lsi_set(fdt_addr_t rcc, int enable) |
| { |
| stm32mp1_ls_osc_set(enable, rcc, RCC_RDLSICR, RCC_RDLSICR_LSION); |
| stm32mp1_osc_wait(enable, rcc, RCC_RDLSICR, RCC_RDLSICR_LSIRDY); |
| } |
| |
| static void stm32mp1_hse_enable(fdt_addr_t rcc, int bypass, int digbyp, int css) |
| { |
| if (digbyp) |
| writel(RCC_OCENR_DIGBYP, rcc + RCC_OCENSETR); |
| if (bypass || digbyp) |
| writel(RCC_OCENR_HSEBYP, rcc + RCC_OCENSETR); |
| |
| stm32mp1_hs_ocs_set(1, rcc, RCC_OCENR_HSEON); |
| stm32mp1_osc_wait(1, rcc, RCC_OCRDYR, RCC_OCRDYR_HSERDY); |
| |
| if (css) |
| writel(RCC_OCENR_HSECSSON, rcc + RCC_OCENSETR); |
| } |
| |
| static void stm32mp1_csi_set(fdt_addr_t rcc, int enable) |
| { |
| stm32mp1_hs_ocs_set(enable, rcc, RCC_OCENR_CSION); |
| stm32mp1_osc_wait(enable, rcc, RCC_OCRDYR, RCC_OCRDYR_CSIRDY); |
| } |
| |
| static void stm32mp1_hsi_set(fdt_addr_t rcc, int enable) |
| { |
| stm32mp1_hs_ocs_set(enable, rcc, RCC_OCENR_HSION); |
| stm32mp1_osc_wait(enable, rcc, RCC_OCRDYR, RCC_OCRDYR_HSIRDY); |
| } |
| |
| static int stm32mp1_set_hsidiv(fdt_addr_t rcc, u8 hsidiv) |
| { |
| u32 address = rcc + RCC_OCRDYR; |
| u32 val; |
| int ret; |
| |
| clrsetbits_le32(rcc + RCC_HSICFGR, |
| RCC_HSICFGR_HSIDIV_MASK, |
| RCC_HSICFGR_HSIDIV_MASK & hsidiv); |
| |
| ret = readl_poll_timeout(address, val, |
| val & RCC_OCRDYR_HSIDIVRDY, |
| TIMEOUT_200MS); |
| if (ret) |
| log_err("HSIDIV failed @ 0x%x: 0x%x\n", |
| address, readl(address)); |
| |
| return ret; |
| } |
| |
| static int stm32mp1_hsidiv(fdt_addr_t rcc, ulong hsifreq) |
| { |
| u8 hsidiv; |
| u32 hsidivfreq = MAX_HSI_HZ; |
| |
| for (hsidiv = 0; hsidiv < 4; hsidiv++, |
| hsidivfreq = hsidivfreq / 2) |
| if (hsidivfreq == hsifreq) |
| break; |
| |
| if (hsidiv == 4) { |
| log_err("hsi frequency invalid"); |
| return -1; |
| } |
| |
| if (hsidiv > 0) |
| return stm32mp1_set_hsidiv(rcc, hsidiv); |
| |
| return 0; |
| } |
| |
| static void pll_start(struct stm32mp1_clk_priv *priv, int pll_id) |
| { |
| const struct stm32mp1_clk_pll *pll = priv->data->pll; |
| |
| clrsetbits_le32(priv->base + pll[pll_id].pllxcr, |
| RCC_PLLNCR_DIVPEN | RCC_PLLNCR_DIVQEN | |
| RCC_PLLNCR_DIVREN, |
| RCC_PLLNCR_PLLON); |
| } |
| |
| static int pll_output(struct stm32mp1_clk_priv *priv, int pll_id, int output) |
| { |
| const struct stm32mp1_clk_pll *pll = priv->data->pll; |
| u32 pllxcr = priv->base + pll[pll_id].pllxcr; |
| u32 val; |
| int ret; |
| |
| ret = readl_poll_timeout(pllxcr, val, val & RCC_PLLNCR_PLLRDY, |
| TIMEOUT_200MS); |
| |
| if (ret) { |
| log_err("PLL%d start failed @ 0x%x: 0x%x\n", |
| pll_id, pllxcr, readl(pllxcr)); |
| return ret; |
| } |
| |
| /* start the requested output */ |
| setbits_le32(pllxcr, output << RCC_PLLNCR_DIVEN_SHIFT); |
| |
| return 0; |
| } |
| |
| static int pll_stop(struct stm32mp1_clk_priv *priv, int pll_id) |
| { |
| const struct stm32mp1_clk_pll *pll = priv->data->pll; |
| u32 pllxcr = priv->base + pll[pll_id].pllxcr; |
| u32 val; |
| |
| /* stop all output */ |
| clrbits_le32(pllxcr, |
| RCC_PLLNCR_DIVPEN | RCC_PLLNCR_DIVQEN | RCC_PLLNCR_DIVREN); |
| |
| /* stop PLL */ |
| clrbits_le32(pllxcr, RCC_PLLNCR_PLLON); |
| |
| /* wait PLL stopped */ |
| return readl_poll_timeout(pllxcr, val, (val & RCC_PLLNCR_PLLRDY) == 0, |
| TIMEOUT_200MS); |
| } |
| |
| static void pll_config_output(struct stm32mp1_clk_priv *priv, |
| int pll_id, u32 *pllcfg) |
| { |
| const struct stm32mp1_clk_pll *pll = priv->data->pll; |
| fdt_addr_t rcc = priv->base; |
| u32 value; |
| |
| value = (pllcfg[PLLCFG_P] << RCC_PLLNCFGR2_DIVP_SHIFT) |
| & RCC_PLLNCFGR2_DIVP_MASK; |
| value |= (pllcfg[PLLCFG_Q] << RCC_PLLNCFGR2_DIVQ_SHIFT) |
| & RCC_PLLNCFGR2_DIVQ_MASK; |
| value |= (pllcfg[PLLCFG_R] << RCC_PLLNCFGR2_DIVR_SHIFT) |
| & RCC_PLLNCFGR2_DIVR_MASK; |
| writel(value, rcc + pll[pll_id].pllxcfgr2); |
| } |
| |
| static int pll_config(struct stm32mp1_clk_priv *priv, int pll_id, |
| u32 *pllcfg, u32 fracv) |
| { |
| const struct stm32mp1_clk_pll *pll = priv->data->pll; |
| fdt_addr_t rcc = priv->base; |
| enum stm32mp1_plltype type = pll[pll_id].plltype; |
| int src; |
| ulong refclk; |
| u8 ifrge = 0; |
| u32 value; |
| |
| src = readl(priv->base + pll[pll_id].rckxselr) & RCC_SELR_SRC_MASK; |
| |
| refclk = stm32mp1_clk_get_fixed(priv, pll[pll_id].refclk[src]) / |
| (pllcfg[PLLCFG_M] + 1); |
| |
| if (refclk < (stm32mp1_pll[type].refclk_min * 1000000) || |
| refclk > (stm32mp1_pll[type].refclk_max * 1000000)) { |
| log_err("invalid refclk = %x\n", (u32)refclk); |
| return -EINVAL; |
| } |
| if (type == PLL_800 && refclk >= 8000000) |
| ifrge = 1; |
| |
| value = (pllcfg[PLLCFG_N] << RCC_PLLNCFGR1_DIVN_SHIFT) |
| & RCC_PLLNCFGR1_DIVN_MASK; |
| value |= (pllcfg[PLLCFG_M] << RCC_PLLNCFGR1_DIVM_SHIFT) |
| & RCC_PLLNCFGR1_DIVM_MASK; |
| value |= (ifrge << RCC_PLLNCFGR1_IFRGE_SHIFT) |
| & RCC_PLLNCFGR1_IFRGE_MASK; |
| writel(value, rcc + pll[pll_id].pllxcfgr1); |
| |
| /* fractional configuration: load sigma-delta modulator (SDM) */ |
| |
| /* Write into FRACV the new fractional value , and FRACLE to 0 */ |
| writel(fracv << RCC_PLLNFRACR_FRACV_SHIFT, |
| rcc + pll[pll_id].pllxfracr); |
| |
| /* Write FRACLE to 1 : FRACV value is loaded into the SDM */ |
| setbits_le32(rcc + pll[pll_id].pllxfracr, |
| RCC_PLLNFRACR_FRACLE); |
| |
| pll_config_output(priv, pll_id, pllcfg); |
| |
| return 0; |
| } |
| |
| static void pll_csg(struct stm32mp1_clk_priv *priv, int pll_id, u32 *csg) |
| { |
| const struct stm32mp1_clk_pll *pll = priv->data->pll; |
| u32 pllxcsg; |
| |
| pllxcsg = ((csg[PLLCSG_MOD_PER] << RCC_PLLNCSGR_MOD_PER_SHIFT) & |
| RCC_PLLNCSGR_MOD_PER_MASK) | |
| ((csg[PLLCSG_INC_STEP] << RCC_PLLNCSGR_INC_STEP_SHIFT) & |
| RCC_PLLNCSGR_INC_STEP_MASK) | |
| ((csg[PLLCSG_SSCG_MODE] << RCC_PLLNCSGR_SSCG_MODE_SHIFT) & |
| RCC_PLLNCSGR_SSCG_MODE_MASK); |
| |
| writel(pllxcsg, priv->base + pll[pll_id].pllxcsgr); |
| |
| setbits_le32(priv->base + pll[pll_id].pllxcr, RCC_PLLNCR_SSCG_CTRL); |
| } |
| |
| static __maybe_unused int pll_set_rate(struct udevice *dev, |
| int pll_id, |
| int div_id, |
| unsigned long clk_rate) |
| { |
| struct stm32mp1_clk_priv *priv = dev_get_priv(dev); |
| unsigned int pllcfg[PLLCFG_NB]; |
| ofnode plloff; |
| char name[12]; |
| const struct stm32mp1_clk_pll *pll = priv->data->pll; |
| enum stm32mp1_plltype type = pll[pll_id].plltype; |
| int divm, divn, divy; |
| int ret; |
| ulong fck_ref; |
| u32 fracv; |
| u64 value; |
| |
| if (div_id > _DIV_NB) |
| return -EINVAL; |
| |
| sprintf(name, "st,pll@%d", pll_id); |
| plloff = dev_read_subnode(dev, name); |
| if (!ofnode_valid(plloff)) |
| return -FDT_ERR_NOTFOUND; |
| |
| ret = ofnode_read_u32_array(plloff, "cfg", |
| pllcfg, PLLCFG_NB); |
| if (ret < 0) |
| return -FDT_ERR_NOTFOUND; |
| |
| fck_ref = pll_get_fref_ck(priv, pll_id); |
| |
| divm = pllcfg[PLLCFG_M]; |
| /* select output divider = 0: for _DIV_P, 1:_DIV_Q 2:_DIV_R */ |
| divy = pllcfg[PLLCFG_P + div_id]; |
| |
| /* For: PLL1 & PLL2 => VCO is * 2 but ck_pll_y is also / 2 |
| * So same final result than PLL2 et 4 |
| * with FRACV |
| * Fck_pll_y = Fck_ref * ((DIVN + 1) + FRACV / 2^13) |
| * / (DIVy + 1) * (DIVM + 1) |
| * value = (DIVN + 1) * 2^13 + FRACV / 2^13 |
| * = Fck_pll_y (DIVy + 1) * (DIVM + 1) * 2^13 / Fck_ref |
| */ |
| value = ((u64)clk_rate * (divy + 1) * (divm + 1)) << 13; |
| value = lldiv(value, fck_ref); |
| |
| divn = (value >> 13) - 1; |
| if (divn < DIVN_MIN || |
| divn > stm32mp1_pll[type].divn_max) { |
| dev_err(dev, "divn invalid = %d", divn); |
| return -EINVAL; |
| } |
| fracv = value - ((divn + 1) << 13); |
| pllcfg[PLLCFG_N] = divn; |
| |
| /* reconfigure PLL */ |
| pll_stop(priv, pll_id); |
| pll_config(priv, pll_id, pllcfg, fracv); |
| pll_start(priv, pll_id); |
| pll_output(priv, pll_id, pllcfg[PLLCFG_O]); |
| |
| return 0; |
| } |
| |
| static int set_clksrc(struct stm32mp1_clk_priv *priv, unsigned int clksrc) |
| { |
| u32 address = priv->base + (clksrc >> 4); |
| u32 val; |
| int ret; |
| |
| clrsetbits_le32(address, RCC_SELR_SRC_MASK, clksrc & RCC_SELR_SRC_MASK); |
| ret = readl_poll_timeout(address, val, val & RCC_SELR_SRCRDY, |
| TIMEOUT_200MS); |
| if (ret) |
| log_err("CLKSRC %x start failed @ 0x%x: 0x%x\n", |
| clksrc, address, readl(address)); |
| |
| return ret; |
| } |
| |
| static void stgen_config(struct stm32mp1_clk_priv *priv) |
| { |
| int p; |
| u32 stgenc, cntfid0; |
| ulong rate; |
| |
| stgenc = STM32_STGEN_BASE; |
| cntfid0 = readl(stgenc + STGENC_CNTFID0); |
| p = stm32mp1_clk_get_parent(priv, STGEN_K); |
| rate = stm32mp1_clk_get(priv, p); |
| |
| if (cntfid0 != rate) { |
| u64 counter; |
| |
| log_debug("System Generic Counter (STGEN) update\n"); |
| clrbits_le32(stgenc + STGENC_CNTCR, STGENC_CNTCR_EN); |
| counter = (u64)readl(stgenc + STGENC_CNTCVL); |
| counter |= ((u64)(readl(stgenc + STGENC_CNTCVU))) << 32; |
| counter = lldiv(counter * (u64)rate, cntfid0); |
| writel((u32)counter, stgenc + STGENC_CNTCVL); |
| writel((u32)(counter >> 32), stgenc + STGENC_CNTCVU); |
| writel(rate, stgenc + STGENC_CNTFID0); |
| setbits_le32(stgenc + STGENC_CNTCR, STGENC_CNTCR_EN); |
| |
| __asm__ volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (rate)); |
| |
| /* need to update gd->arch.timer_rate_hz with new frequency */ |
| timer_init(); |
| } |
| } |
| |
| static int set_clkdiv(unsigned int clkdiv, u32 address) |
| { |
| u32 val; |
| int ret; |
| |
| clrsetbits_le32(address, RCC_DIVR_DIV_MASK, clkdiv & RCC_DIVR_DIV_MASK); |
| ret = readl_poll_timeout(address, val, val & RCC_DIVR_DIVRDY, |
| TIMEOUT_200MS); |
| if (ret) |
| log_err("CLKDIV %x start failed @ 0x%x: 0x%x\n", |
| clkdiv, address, readl(address)); |
| |
| return ret; |
| } |
| |
| static void stm32mp1_mco_csg(struct stm32mp1_clk_priv *priv, |
| u32 clksrc, u32 clkdiv) |
| { |
| u32 address = priv->base + (clksrc >> 4); |
| |
| /* |
| * binding clksrc : bit15-4 offset |
| * bit3: disable |
| * bit2-0: MCOSEL[2:0] |
| */ |
| if (clksrc & 0x8) { |
| clrbits_le32(address, RCC_MCOCFG_MCOON); |
| } else { |
| clrsetbits_le32(address, |
| RCC_MCOCFG_MCOSRC_MASK, |
| clksrc & RCC_MCOCFG_MCOSRC_MASK); |
| clrsetbits_le32(address, |
| RCC_MCOCFG_MCODIV_MASK, |
| clkdiv << RCC_MCOCFG_MCODIV_SHIFT); |
| setbits_le32(address, RCC_MCOCFG_MCOON); |
| } |
| } |
| |
| static void set_rtcsrc(struct stm32mp1_clk_priv *priv, |
| unsigned int clksrc, |
| int lse_css) |
| { |
| u32 address = priv->base + RCC_BDCR; |
| |
| if (readl(address) & RCC_BDCR_RTCCKEN) |
| goto skip_rtc; |
| |
| if (clksrc == CLK_RTC_DISABLED) |
| goto skip_rtc; |
| |
| clrsetbits_le32(address, |
| RCC_BDCR_RTCSRC_MASK, |
| clksrc << RCC_BDCR_RTCSRC_SHIFT); |
| |
| setbits_le32(address, RCC_BDCR_RTCCKEN); |
| |
| skip_rtc: |
| if (lse_css) |
| setbits_le32(address, RCC_BDCR_LSECSSON); |
| } |
| |
| static void pkcs_config(struct stm32mp1_clk_priv *priv, u32 pkcs) |
| { |
| u32 address = priv->base + ((pkcs >> 4) & 0xFFF); |
| u32 value = pkcs & 0xF; |
| u32 mask = 0xF; |
| |
| if (pkcs & BIT(31)) { |
| mask <<= 4; |
| value <<= 4; |
| } |
| clrsetbits_le32(address, mask, value); |
| } |
| |
| static int stm32mp1_clktree(struct udevice *dev) |
| { |
| struct stm32mp1_clk_priv *priv = dev_get_priv(dev); |
| fdt_addr_t rcc = priv->base; |
| unsigned int clksrc[CLKSRC_NB]; |
| unsigned int clkdiv[CLKDIV_NB]; |
| unsigned int pllcfg[_PLL_NB][PLLCFG_NB]; |
| unsigned int pllfracv[_PLL_NB]; |
| unsigned int pllcsg[_PLL_NB][PLLCSG_NB]; |
| bool pllcfg_valid[_PLL_NB]; |
| bool pllcsg_set[_PLL_NB]; |
| int ret; |
| int i, len; |
| int lse_css = 0; |
| const u32 *pkcs_cell; |
| |
| /* check mandatory field */ |
| ret = dev_read_u32_array(dev, "st,clksrc", clksrc, CLKSRC_NB); |
| if (ret < 0) { |
| dev_dbg(dev, "field st,clksrc invalid: error %d\n", ret); |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| ret = dev_read_u32_array(dev, "st,clkdiv", clkdiv, CLKDIV_NB); |
| if (ret < 0) { |
| dev_dbg(dev, "field st,clkdiv invalid: error %d\n", ret); |
| return -FDT_ERR_NOTFOUND; |
| } |
| |
| /* check mandatory field in each pll */ |
| for (i = 0; i < _PLL_NB; i++) { |
| char name[12]; |
| ofnode node; |
| |
| sprintf(name, "st,pll@%d", i); |
| node = dev_read_subnode(dev, name); |
| pllcfg_valid[i] = ofnode_valid(node); |
| pllcsg_set[i] = false; |
| if (pllcfg_valid[i]) { |
| dev_dbg(dev, "DT for PLL %d @ %s\n", i, name); |
| ret = ofnode_read_u32_array(node, "cfg", |
| pllcfg[i], PLLCFG_NB); |
| if (ret < 0) { |
| dev_dbg(dev, "field cfg invalid: error %d\n", ret); |
| return -FDT_ERR_NOTFOUND; |
| } |
| pllfracv[i] = ofnode_read_u32_default(node, "frac", 0); |
| |
| ret = ofnode_read_u32_array(node, "csg", pllcsg[i], |
| PLLCSG_NB); |
| if (!ret) { |
| pllcsg_set[i] = true; |
| } else if (ret != -FDT_ERR_NOTFOUND) { |
| dev_dbg(dev, "invalid csg node for pll@%d res=%d\n", |
| i, ret); |
| return ret; |
| } |
| } else if (i == _PLL1) { |
| /* use OPP for PLL1 for A7 CPU */ |
| dev_dbg(dev, "DT for PLL %d with OPP\n", i); |
| ret = stm32mp1_pll1_opp(priv, |
| clksrc[CLKSRC_PLL12], |
| pllcfg[i], |
| &pllfracv[i]); |
| if (ret) { |
| dev_dbg(dev, "PLL %d with OPP error = %d\n", i, ret); |
| return ret; |
| } |
| pllcfg_valid[i] = true; |
| } |
| } |
| |
| dev_dbg(dev, "configuration MCO\n"); |
| stm32mp1_mco_csg(priv, clksrc[CLKSRC_MCO1], clkdiv[CLKDIV_MCO1]); |
| stm32mp1_mco_csg(priv, clksrc[CLKSRC_MCO2], clkdiv[CLKDIV_MCO2]); |
| |
| dev_dbg(dev, "switch ON osillator\n"); |
| /* |
| * switch ON oscillator found in device-tree, |
| * HSI already ON after bootrom |
| */ |
| if (clk_valid(&priv->osc_clk[_LSI])) |
| stm32mp1_lsi_set(rcc, 1); |
| |
| if (clk_valid(&priv->osc_clk[_LSE])) { |
| int bypass, digbyp; |
| u32 lsedrv; |
| struct udevice *dev = priv->osc_clk[_LSE].dev; |
| |
| bypass = dev_read_bool(dev, "st,bypass"); |
| digbyp = dev_read_bool(dev, "st,digbypass"); |
| lse_css = dev_read_bool(dev, "st,css"); |
| lsedrv = dev_read_u32_default(dev, "st,drive", |
| LSEDRV_MEDIUM_HIGH); |
| |
| stm32mp1_lse_enable(rcc, bypass, digbyp, lsedrv); |
| } |
| |
| if (clk_valid(&priv->osc_clk[_HSE])) { |
| int bypass, digbyp, css; |
| struct udevice *dev = priv->osc_clk[_HSE].dev; |
| |
| bypass = dev_read_bool(dev, "st,bypass"); |
| digbyp = dev_read_bool(dev, "st,digbypass"); |
| css = dev_read_bool(dev, "st,css"); |
| |
| stm32mp1_hse_enable(rcc, bypass, digbyp, css); |
| } |
| /* CSI is mandatory for automatic I/O compensation (SYSCFG_CMPCR) |
| * => switch on CSI even if node is not present in device tree |
| */ |
| stm32mp1_csi_set(rcc, 1); |
| |
| /* come back to HSI */ |
| dev_dbg(dev, "come back to HSI\n"); |
| set_clksrc(priv, CLK_MPU_HSI); |
| set_clksrc(priv, CLK_AXI_HSI); |
| set_clksrc(priv, CLK_MCU_HSI); |
| |
| dev_dbg(dev, "pll stop\n"); |
| for (i = 0; i < _PLL_NB; i++) |
| pll_stop(priv, i); |
| |
| /* configure HSIDIV */ |
| dev_dbg(dev, "configure HSIDIV\n"); |
| if (clk_valid(&priv->osc_clk[_HSI])) { |
| stm32mp1_hsidiv(rcc, clk_get_rate(&priv->osc_clk[_HSI])); |
| stgen_config(priv); |
| } |
| |
| /* select DIV */ |
| dev_dbg(dev, "select DIV\n"); |
| /* no ready bit when MPUSRC != CLK_MPU_PLL1P_DIV, MPUDIV is disabled */ |
| writel(clkdiv[CLKDIV_MPU] & RCC_DIVR_DIV_MASK, rcc + RCC_MPCKDIVR); |
| set_clkdiv(clkdiv[CLKDIV_AXI], rcc + RCC_AXIDIVR); |
| set_clkdiv(clkdiv[CLKDIV_APB4], rcc + RCC_APB4DIVR); |
| set_clkdiv(clkdiv[CLKDIV_APB5], rcc + RCC_APB5DIVR); |
| set_clkdiv(clkdiv[CLKDIV_MCU], rcc + RCC_MCUDIVR); |
| set_clkdiv(clkdiv[CLKDIV_APB1], rcc + RCC_APB1DIVR); |
| set_clkdiv(clkdiv[CLKDIV_APB2], rcc + RCC_APB2DIVR); |
| set_clkdiv(clkdiv[CLKDIV_APB3], rcc + RCC_APB3DIVR); |
| |
| /* no ready bit for RTC */ |
| writel(clkdiv[CLKDIV_RTC] & RCC_DIVR_DIV_MASK, rcc + RCC_RTCDIVR); |
| |
| /* configure PLLs source */ |
| dev_dbg(dev, "configure PLLs source\n"); |
| set_clksrc(priv, clksrc[CLKSRC_PLL12]); |
| set_clksrc(priv, clksrc[CLKSRC_PLL3]); |
| set_clksrc(priv, clksrc[CLKSRC_PLL4]); |
| |
| /* configure and start PLLs */ |
| dev_dbg(dev, "configure PLLs\n"); |
| for (i = 0; i < _PLL_NB; i++) { |
| if (!pllcfg_valid[i]) |
| continue; |
| dev_dbg(dev, "configure PLL %d\n", i); |
| pll_config(priv, i, pllcfg[i], pllfracv[i]); |
| if (pllcsg_set[i]) |
| pll_csg(priv, i, pllcsg[i]); |
| pll_start(priv, i); |
| } |
| |
| /* wait and start PLLs ouptut when ready */ |
| for (i = 0; i < _PLL_NB; i++) { |
| if (!pllcfg_valid[i]) |
| continue; |
| dev_dbg(dev, "output PLL %d\n", i); |
| pll_output(priv, i, pllcfg[i][PLLCFG_O]); |
| } |
| |
| /* wait LSE ready before to use it */ |
| if (clk_valid(&priv->osc_clk[_LSE])) |
| stm32mp1_lse_wait(rcc); |
| |
| /* configure with expected clock source */ |
| dev_dbg(dev, "CLKSRC\n"); |
| set_clksrc(priv, clksrc[CLKSRC_MPU]); |
| set_clksrc(priv, clksrc[CLKSRC_AXI]); |
| set_clksrc(priv, clksrc[CLKSRC_MCU]); |
| set_rtcsrc(priv, clksrc[CLKSRC_RTC], lse_css); |
| |
| /* configure PKCK */ |
| dev_dbg(dev, "PKCK\n"); |
| pkcs_cell = dev_read_prop(dev, "st,pkcs", &len); |
| if (pkcs_cell) { |
| bool ckper_disabled = false; |
| |
| for (i = 0; i < len / sizeof(u32); i++) { |
| u32 pkcs = (u32)fdt32_to_cpu(pkcs_cell[i]); |
| |
| if (pkcs == CLK_CKPER_DISABLED) { |
| ckper_disabled = true; |
| continue; |
| } |
| pkcs_config(priv, pkcs); |
| } |
| /* CKPER is source for some peripheral clock |
| * (FMC-NAND / QPSI-NOR) and switching source is allowed |
| * only if previous clock is still ON |
| * => deactivated CKPER only after switching clock |
| */ |
| if (ckper_disabled) |
| pkcs_config(priv, CLK_CKPER_DISABLED); |
| } |
| |
| /* STGEN clock source can change with CLK_STGEN_XXX */ |
| stgen_config(priv); |
| |
| dev_dbg(dev, "oscillator off\n"); |
| /* switch OFF HSI if not found in device-tree */ |
| if (!clk_valid(&priv->osc_clk[_HSI])) |
| stm32mp1_hsi_set(rcc, 0); |
| |
| /* Software Self-Refresh mode (SSR) during DDR initilialization */ |
| clrsetbits_le32(priv->base + RCC_DDRITFCR, |
| RCC_DDRITFCR_DDRCKMOD_MASK, |
| RCC_DDRITFCR_DDRCKMOD_SSR << |
| RCC_DDRITFCR_DDRCKMOD_SHIFT); |
| |
| return 0; |
| } |
| #endif /* STM32MP1_CLOCK_TREE_INIT */ |
| |
| static int pll_set_output_rate(struct udevice *dev, |
| int pll_id, |
| int div_id, |
| unsigned long clk_rate) |
| { |
| struct stm32mp1_clk_priv *priv = dev_get_priv(dev); |
| const struct stm32mp1_clk_pll *pll = priv->data->pll; |
| u32 pllxcr = priv->base + pll[pll_id].pllxcr; |
| int div; |
| ulong fvco; |
| |
| if (div_id > _DIV_NB) |
| return -EINVAL; |
| |
| fvco = pll_get_fvco(priv, pll_id); |
| |
| if (fvco <= clk_rate) |
| div = 1; |
| else |
| div = DIV_ROUND_UP(fvco, clk_rate); |
| |
| if (div > 128) |
| div = 128; |
| |
| /* stop the requested output */ |
| clrbits_le32(pllxcr, 0x1 << div_id << RCC_PLLNCR_DIVEN_SHIFT); |
| /* change divider */ |
| clrsetbits_le32(priv->base + pll[pll_id].pllxcfgr2, |
| RCC_PLLNCFGR2_DIVX_MASK << RCC_PLLNCFGR2_SHIFT(div_id), |
| (div - 1) << RCC_PLLNCFGR2_SHIFT(div_id)); |
| /* start the requested output */ |
| setbits_le32(pllxcr, 0x1 << div_id << RCC_PLLNCR_DIVEN_SHIFT); |
| |
| return 0; |
| } |
| |
| static ulong stm32mp1_clk_set_rate(struct clk *clk, unsigned long clk_rate) |
| { |
| struct stm32mp1_clk_priv *priv = dev_get_priv(clk->dev); |
| int p; |
| |
| switch (clk->id) { |
| #if defined(STM32MP1_CLOCK_TREE_INIT) && \ |
| defined(CONFIG_STM32MP1_DDR_INTERACTIVE) |
| case DDRPHYC: |
| break; |
| #endif |
| case LTDC_PX: |
| case DSI_PX: |
| break; |
| default: |
| dev_err(clk->dev, "Set of clk %ld not supported", clk->id); |
| return -EINVAL; |
| } |
| |
| p = stm32mp1_clk_get_parent(priv, clk->id); |
| dev_vdbg(clk->dev, "parent = %d:%s\n", p, stm32mp1_clk_parent_name[p]); |
| if (p < 0) |
| return -EINVAL; |
| |
| switch (p) { |
| #if defined(STM32MP1_CLOCK_TREE_INIT) && \ |
| defined(CONFIG_STM32MP1_DDR_INTERACTIVE) |
| case _PLL2_R: /* DDRPHYC */ |
| { |
| /* only for change DDR clock in interactive mode */ |
| ulong result; |
| |
| set_clksrc(priv, CLK_AXI_HSI); |
| result = pll_set_rate(clk->dev, _PLL2, _DIV_R, clk_rate); |
| set_clksrc(priv, CLK_AXI_PLL2P); |
| return result; |
| } |
| #endif |
| |
| case _PLL4_Q: |
| /* for LTDC_PX and DSI_PX case */ |
| return pll_set_output_rate(clk->dev, _PLL4, _DIV_Q, clk_rate); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static void stm32mp1_osc_init(struct udevice *dev) |
| { |
| struct stm32mp1_clk_priv *priv = dev_get_priv(dev); |
| int i; |
| const char *name[NB_OSC] = { |
| [_LSI] = "lsi", |
| [_LSE] = "lse", |
| [_HSI] = "hsi", |
| [_HSE] = "hse", |
| [_CSI] = "csi", |
| [_I2S_CKIN] = "i2s_ckin", |
| }; |
| |
| for (i = 0; i < NB_OSC; i++) { |
| if (clk_get_by_name(dev, name[i], &priv->osc_clk[i])) |
| dev_dbg(dev, "No source clock \"%s\"", name[i]); |
| else |
| dev_dbg(dev, "%s clock rate: %luHz\n", |
| name[i], clk_get_rate(&priv->osc_clk[i])); |
| } |
| } |
| |
| static void __maybe_unused stm32mp1_clk_dump(struct stm32mp1_clk_priv *priv) |
| { |
| char buf[32]; |
| int i, s, p; |
| |
| printf("Clocks:\n"); |
| for (i = 0; i < _PARENT_NB; i++) { |
| printf("- %s : %s MHz\n", |
| stm32mp1_clk_parent_name[i], |
| strmhz(buf, stm32mp1_clk_get(priv, i))); |
| } |
| printf("Source Clocks:\n"); |
| for (i = 0; i < _PARENT_SEL_NB; i++) { |
| p = (readl(priv->base + priv->data->sel[i].offset) >> |
| priv->data->sel[i].src) & priv->data->sel[i].msk; |
| if (p < priv->data->sel[i].nb_parent) { |
| s = priv->data->sel[i].parent[p]; |
| printf("- %s(%d) => parent %s(%d)\n", |
| stm32mp1_clk_parent_sel_name[i], i, |
| stm32mp1_clk_parent_name[s], s); |
| } else { |
| printf("- %s(%d) => parent index %d is invalid\n", |
| stm32mp1_clk_parent_sel_name[i], i, p); |
| } |
| } |
| } |
| |
| #ifdef CONFIG_CMD_CLK |
| int soc_clk_dump(void) |
| { |
| struct udevice *dev; |
| struct stm32mp1_clk_priv *priv; |
| int ret; |
| |
| ret = uclass_get_device_by_driver(UCLASS_CLK, |
| DM_DRIVER_GET(stm32mp1_clock), |
| &dev); |
| if (ret) |
| return ret; |
| |
| priv = dev_get_priv(dev); |
| |
| stm32mp1_clk_dump(priv); |
| |
| return 0; |
| } |
| #endif |
| |
| static int stm32mp1_clk_probe(struct udevice *dev) |
| { |
| int result = 0; |
| struct stm32mp1_clk_priv *priv = dev_get_priv(dev); |
| |
| priv->base = dev_read_addr(dev->parent); |
| if (priv->base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| priv->data = (void *)&stm32mp1_data; |
| |
| if (!priv->data->gate || !priv->data->sel || |
| !priv->data->pll) |
| return -EINVAL; |
| |
| stm32mp1_osc_init(dev); |
| |
| #ifdef STM32MP1_CLOCK_TREE_INIT |
| /* clock tree init is done only one time, before relocation */ |
| if (!(gd->flags & GD_FLG_RELOC)) |
| result = stm32mp1_clktree(dev); |
| if (result) |
| dev_err(dev, "clock tree initialization failed (%d)\n", result); |
| #endif |
| |
| #ifndef CONFIG_SPL_BUILD |
| #if defined(VERBOSE_DEBUG) |
| /* display debug information for probe after relocation */ |
| if (gd->flags & GD_FLG_RELOC) |
| stm32mp1_clk_dump(priv); |
| #endif |
| |
| gd->cpu_clk = stm32mp1_clk_get(priv, _CK_MPU); |
| gd->bus_clk = stm32mp1_clk_get(priv, _ACLK); |
| /* DDRPHYC father */ |
| gd->mem_clk = stm32mp1_clk_get(priv, _PLL2_R); |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| if (gd->flags & GD_FLG_RELOC) { |
| char buf[32]; |
| |
| log_info("Clocks:\n"); |
| log_info("- MPU : %s MHz\n", strmhz(buf, gd->cpu_clk)); |
| log_info("- MCU : %s MHz\n", |
| strmhz(buf, stm32mp1_clk_get(priv, _CK_MCU))); |
| log_info("- AXI : %s MHz\n", strmhz(buf, gd->bus_clk)); |
| log_info("- PER : %s MHz\n", |
| strmhz(buf, stm32mp1_clk_get(priv, _CK_PER))); |
| log_info("- DDR : %s MHz\n", strmhz(buf, gd->mem_clk)); |
| } |
| #endif /* CONFIG_DISPLAY_CPUINFO */ |
| #endif |
| |
| return result; |
| } |
| |
| static const struct clk_ops stm32mp1_clk_ops = { |
| .enable = stm32mp1_clk_enable, |
| .disable = stm32mp1_clk_disable, |
| .get_rate = stm32mp1_clk_get_rate, |
| .set_rate = stm32mp1_clk_set_rate, |
| }; |
| |
| U_BOOT_DRIVER(stm32mp1_clock) = { |
| .name = "stm32mp1_clk", |
| .id = UCLASS_CLK, |
| .ops = &stm32mp1_clk_ops, |
| .priv_auto = sizeof(struct stm32mp1_clk_priv), |
| .probe = stm32mp1_clk_probe, |
| }; |