| /* |
| * i.MX nand boot control block(bcb). |
| * |
| * Based on the common/imx-bbu-nand-fcb.c from barebox and imx kobs-ng |
| * |
| * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com> |
| * Copyright (C) 2016 Sergey Kubushyn <ksi@koi8.net> |
| * |
| * Reconstucted by Han Xu <han.xu@nxp.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <nand.h> |
| #include <dm/devres.h> |
| #include <linux/bug.h> |
| |
| #include <asm/io.h> |
| #include <jffs2/jffs2.h> |
| #include <linux/bch.h> |
| #include <linux/mtd/mtd.h> |
| |
| #include <asm/arch/sys_proto.h> |
| #include <asm/mach-imx/imx-nandbcb.h> |
| #include <asm/mach-imx/imximage.cfg> |
| #include <mxs_nand.h> |
| #include <linux/mtd/mtd.h> |
| #include <nand.h> |
| #include <fuse.h> |
| |
| #include "../../../cmd/legacy-mtd-utils.h" |
| |
| /* FCB related flags */ |
| /* FCB layout with leading 12B reserved */ |
| #define FCB_LAYOUT_RESV_12B BIT(0) |
| /* FCB layout with leading 32B meta data */ |
| #define FCB_LAYOUT_META_32B BIT(1) |
| /* FCB encrypted by Hamming code */ |
| #define FCB_ENCODE_HAMMING BIT(2) |
| /* FCB encrypted by 40bit BCH */ |
| #define FCB_ENCODE_BCH_40b BIT(3) |
| /* FCB encrypted by 62bit BCH */ |
| #define FCB_ENCODE_BCH_62b BIT(4) |
| /* FCB encrypted by BCH */ |
| #define FCB_ENCODE_BCH (FCB_ENCODE_BCH_40b | FCB_ENCODE_BCH_62b) |
| /* FCB data was randomized */ |
| #define FCB_RANDON_ENABLED BIT(5) |
| |
| /* Firmware related flags */ |
| /* No 1K padding */ |
| #define FIRMWARE_NEED_PADDING BIT(8) |
| /* Extra firmware*/ |
| #define FIRMWARE_EXTRA_ONE BIT(9) |
| /* Secondary firmware on fixed address */ |
| #define FIRMWARE_SECONDARY_FIXED_ADDR BIT(10) |
| |
| /* Boot search related flags */ |
| #define BT_SEARCH_CNT_FROM_FUSE BIT(16) |
| |
| struct platform_config { |
| int misc_flags; |
| }; |
| |
| static struct platform_config plat_config; |
| |
| /* imx6q/dl/solo */ |
| static struct platform_config imx6qdl_plat_config = { |
| .misc_flags = FCB_LAYOUT_RESV_12B | |
| FCB_ENCODE_HAMMING | |
| FIRMWARE_NEED_PADDING, |
| }; |
| |
| static struct platform_config imx6sx_plat_config = { |
| .misc_flags = FCB_LAYOUT_META_32B | |
| FCB_ENCODE_BCH_62b | |
| FIRMWARE_NEED_PADDING | |
| FCB_RANDON_ENABLED, |
| }; |
| |
| static struct platform_config imx7d_plat_config = { |
| .misc_flags = FCB_LAYOUT_META_32B | |
| FCB_ENCODE_BCH_62b | |
| FIRMWARE_NEED_PADDING | |
| FCB_RANDON_ENABLED, |
| }; |
| |
| /* imx6ul/ull/ulz */ |
| static struct platform_config imx6ul_plat_config = { |
| .misc_flags = FCB_LAYOUT_META_32B | |
| FCB_ENCODE_BCH_40b | |
| FIRMWARE_NEED_PADDING, |
| }; |
| |
| static struct platform_config imx8mq_plat_config = { |
| .misc_flags = FCB_LAYOUT_META_32B | |
| FCB_ENCODE_BCH_62b | |
| FIRMWARE_NEED_PADDING | |
| FCB_RANDON_ENABLED | |
| FIRMWARE_EXTRA_ONE, |
| }; |
| |
| /* all other imx8mm */ |
| static struct platform_config imx8mm_plat_config = { |
| .misc_flags = FCB_LAYOUT_META_32B | |
| FCB_ENCODE_BCH_62b | |
| FIRMWARE_NEED_PADDING | |
| FCB_RANDON_ENABLED, |
| }; |
| |
| /* imx8mn */ |
| static struct platform_config imx8mn_plat_config = { |
| .misc_flags = FCB_LAYOUT_META_32B | |
| FCB_ENCODE_BCH_62b | |
| FCB_RANDON_ENABLED | |
| FIRMWARE_SECONDARY_FIXED_ADDR | |
| BT_SEARCH_CNT_FROM_FUSE, |
| }; |
| |
| /* imx8qx/qm */ |
| static struct platform_config imx8q_plat_config = { |
| .misc_flags = FCB_LAYOUT_META_32B | |
| FCB_ENCODE_BCH_62b | |
| FCB_RANDON_ENABLED | |
| FIRMWARE_SECONDARY_FIXED_ADDR | |
| BT_SEARCH_CNT_FROM_FUSE, |
| }; |
| |
| /* boot search related variables and definitions */ |
| static int g_boot_search_count = 4; |
| static int g_boot_search_stride; |
| static int g_pages_per_stride; |
| |
| /* mtd config structure */ |
| struct boot_config { |
| int dev; |
| struct mtd_info *mtd; |
| loff_t maxsize; |
| loff_t input_size; |
| loff_t offset; |
| loff_t boot_stream1_address; |
| loff_t boot_stream2_address; |
| size_t boot_stream1_size; |
| size_t boot_stream2_size; |
| size_t max_boot_stream_size; |
| int stride_size_in_byte; |
| int search_area_size_in_bytes; |
| int search_area_size_in_pages; |
| int secondary_boot_stream_off_in_MB; |
| }; |
| |
| /* boot_stream config structure */ |
| struct boot_stream_config { |
| char bs_label[32]; |
| loff_t bs_addr; |
| size_t bs_size; |
| void *bs_buf; |
| loff_t next_bs_addr; |
| bool need_padding; |
| }; |
| |
| /* FW index */ |
| #define FW1_ONLY 1 |
| #define FW2_ONLY 2 |
| #define FW_ALL FW1_ONLY | FW2_ONLY |
| #define FW_INX(x) (1 << (x)) |
| |
| /* NAND convert macros */ |
| #define CONV_TO_PAGES(x) ((u32)(x) / (u32)(mtd->writesize)) |
| #define CONV_TO_BLOCKS(x) ((u32)(x) / (u32)(mtd->erasesize)) |
| |
| #define GETBIT(v, n) (((v) >> (n)) & 0x1) |
| #define IMX8MQ_SPL_SZ 0x3e000 |
| #define IMX8MQ_HDMI_FW_SZ 0x19c00 |
| |
| static int nandbcb_get_info(int argc, char * const argv[], |
| struct boot_config *boot_cfg) |
| { |
| int dev; |
| struct mtd_info *mtd; |
| |
| dev = nand_curr_device; |
| if (dev < 0) { |
| printf("failed to get nand_curr_device, run nand device\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| mtd = get_nand_dev_by_index(dev); |
| if (!mtd) { |
| printf("failed to get mtd info\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| boot_cfg->dev = dev; |
| boot_cfg->mtd = mtd; |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int nandbcb_get_size(int argc, char * const argv[], int num, |
| struct boot_config *boot_cfg) |
| { |
| int dev; |
| loff_t offset, size, maxsize; |
| struct mtd_info *mtd; |
| |
| dev = boot_cfg->dev; |
| mtd = boot_cfg->mtd; |
| size = 0; |
| |
| if (mtd_arg_off_size(argc - num, argv + num, &dev, &offset, &size, |
| &maxsize, MTD_DEV_TYPE_NAND, mtd->size)) |
| return CMD_RET_FAILURE; |
| |
| boot_cfg->maxsize = maxsize; |
| boot_cfg->offset = offset; |
| |
| debug("max: %llx, offset: %llx\n", maxsize, offset); |
| |
| if (size && size != maxsize) |
| boot_cfg->input_size = size; |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int nandbcb_set_boot_config(int argc, char * const argv[], |
| struct boot_config *boot_cfg) |
| { |
| struct mtd_info *mtd; |
| loff_t maxsize; |
| loff_t boot_stream1_address, boot_stream2_address, max_boot_stream_size; |
| |
| if (!boot_cfg->mtd) { |
| printf("Didn't get the mtd info, quit\n"); |
| return CMD_RET_FAILURE; |
| } |
| mtd = boot_cfg->mtd; |
| |
| /* |
| * By default |
| * set the search count as 4 |
| * set each FCB/DBBT/Firmware offset at the beginning of blocks |
| * customers may change the value as needed |
| */ |
| |
| /* if need more compact layout, change these values */ |
| /* g_boot_search_count was set as 4 at the definition*/ |
| /* g_pages_per_stride was set as block size */ |
| |
| g_pages_per_stride = mtd->erasesize / mtd->writesize; |
| |
| g_boot_search_stride = mtd->writesize * g_pages_per_stride; |
| |
| boot_cfg->stride_size_in_byte = g_boot_search_stride * mtd->writesize; |
| boot_cfg->search_area_size_in_bytes = |
| g_boot_search_count * g_boot_search_stride; |
| boot_cfg->search_area_size_in_pages = |
| boot_cfg->search_area_size_in_bytes / mtd->writesize; |
| |
| /* after FCB/DBBT, split the rest of area for two Firmwares */ |
| if (!boot_cfg->maxsize) { |
| printf("Didn't get the maxsize, quit\n"); |
| return CMD_RET_FAILURE; |
| } |
| maxsize = boot_cfg->maxsize; |
| /* align to page boundary */ |
| maxsize = ((u32)(maxsize + mtd->writesize - 1)) / (u32)mtd->writesize |
| * mtd->writesize; |
| |
| boot_stream1_address = 2 * boot_cfg->search_area_size_in_bytes; |
| boot_stream2_address = ((maxsize - boot_stream1_address) / 2 + |
| boot_stream1_address); |
| |
| if (boot_cfg->secondary_boot_stream_off_in_MB) |
| boot_stream2_address = |
| (loff_t)boot_cfg->secondary_boot_stream_off_in_MB * 1024 * 1024; |
| |
| max_boot_stream_size = boot_stream2_address - boot_stream1_address; |
| |
| /* sanity check */ |
| if (max_boot_stream_size <= 0) { |
| debug("st1_addr: %llx, st2_addr: %llx, max: %llx\n", |
| boot_stream1_address, boot_stream2_address, |
| max_boot_stream_size); |
| printf("something wrong with firmware address settings\n"); |
| return CMD_RET_FAILURE; |
| } |
| boot_cfg->boot_stream1_address = boot_stream1_address; |
| boot_cfg->boot_stream2_address = boot_stream2_address; |
| boot_cfg->max_boot_stream_size = max_boot_stream_size; |
| |
| /* set the boot_stream size as the input size now */ |
| if (boot_cfg->input_size) { |
| boot_cfg->boot_stream1_size = boot_cfg->input_size; |
| boot_cfg->boot_stream2_size = boot_cfg->input_size; |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int nandbcb_check_space(struct boot_config *boot_cfg) |
| { |
| size_t maxsize = boot_cfg->maxsize; |
| size_t max_boot_stream_size = boot_cfg->max_boot_stream_size; |
| loff_t boot_stream2_address = boot_cfg->boot_stream2_address; |
| |
| if (boot_cfg->boot_stream1_size && |
| boot_cfg->boot_stream1_size > max_boot_stream_size) { |
| printf("boot stream1 doesn't fit, check partition size or settings\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (boot_cfg->boot_stream2_size && |
| boot_cfg->boot_stream2_size > maxsize - boot_stream2_address) { |
| printf("boot stream2 doesn't fit, check partition size or settings\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| #if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) |
| static uint8_t reverse_bit(uint8_t b) |
| { |
| b = (b & 0xf0) >> 4 | (b & 0x0f) << 4; |
| b = (b & 0xcc) >> 2 | (b & 0x33) << 2; |
| b = (b & 0xaa) >> 1 | (b & 0x55) << 1; |
| |
| return b; |
| } |
| |
| static void encode_bch_ecc(void *buf, struct fcb_block *fcb, int eccbits) |
| { |
| int i, j, m = 13; |
| int blocksize = 128; |
| int numblocks = 8; |
| int ecc_buf_size = (m * eccbits + 7) / 8; |
| struct bch_control *bch = init_bch(m, eccbits, 0); |
| u8 *ecc_buf = kzalloc(ecc_buf_size, GFP_KERNEL); |
| u8 *tmp_buf = kzalloc(blocksize * numblocks, GFP_KERNEL); |
| u8 *psrc, *pdst; |
| |
| /* |
| * The blocks here are bit aligned. If eccbits is a multiple of 8, |
| * we just can copy bytes. Otherwiese we must move the blocks to |
| * the next free bit position. |
| */ |
| WARN_ON(eccbits % 8); |
| |
| memcpy(tmp_buf, fcb, sizeof(*fcb)); |
| |
| for (i = 0; i < numblocks; i++) { |
| memset(ecc_buf, 0, ecc_buf_size); |
| psrc = tmp_buf + i * blocksize; |
| pdst = buf + i * (blocksize + ecc_buf_size); |
| |
| /* copy data byte aligned to destination buf */ |
| memcpy(pdst, psrc, blocksize); |
| |
| /* |
| * imx-kobs use a modified encode_bch which reverse the |
| * bit order of the data before calculating bch. |
| * Do this in the buffer and use the bch lib here. |
| */ |
| for (j = 0; j < blocksize; j++) |
| psrc[j] = reverse_bit(psrc[j]); |
| |
| encode_bch(bch, psrc, blocksize, ecc_buf); |
| |
| /* reverse ecc bit */ |
| for (j = 0; j < ecc_buf_size; j++) |
| ecc_buf[j] = reverse_bit(ecc_buf[j]); |
| |
| /* Here eccbuf is byte aligned and we can just copy it */ |
| memcpy(pdst + blocksize, ecc_buf, ecc_buf_size); |
| } |
| |
| kfree(ecc_buf); |
| kfree(tmp_buf); |
| free_bch(bch); |
| } |
| #else |
| |
| static u8 calculate_parity_13_8(u8 d) |
| { |
| u8 p = 0; |
| |
| p |= (GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 3) ^ GETBIT(d, 2)) << 0; |
| p |= (GETBIT(d, 7) ^ GETBIT(d, 5) ^ GETBIT(d, 4) ^ GETBIT(d, 2) ^ |
| GETBIT(d, 1)) << 1; |
| p |= (GETBIT(d, 7) ^ GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 1) ^ |
| GETBIT(d, 0)) << 2; |
| p |= (GETBIT(d, 7) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d, 0)) << 3; |
| p |= (GETBIT(d, 6) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d, 2) ^ |
| GETBIT(d, 1) ^ GETBIT(d, 0)) << 4; |
| |
| return p; |
| } |
| |
| static void encode_hamming_13_8(void *_src, void *_ecc, size_t size) |
| { |
| int i; |
| u8 *src = _src; |
| u8 *ecc = _ecc; |
| |
| for (i = 0; i < size; i++) |
| ecc[i] = calculate_parity_13_8(src[i]); |
| } |
| #endif |
| |
| static u32 calc_chksum(void *buf, size_t size) |
| { |
| u32 chksum = 0; |
| u8 *bp = buf; |
| size_t i; |
| |
| for (i = 0; i < size; i++) |
| chksum += bp[i]; |
| |
| return ~chksum; |
| } |
| |
| static void fill_fcb(struct fcb_block *fcb, struct boot_config *boot_cfg) |
| { |
| struct mtd_info *mtd = boot_cfg->mtd; |
| struct nand_chip *chip = mtd_to_nand(mtd); |
| struct mxs_nand_info *nand_info = nand_get_controller_data(chip); |
| struct mxs_nand_layout l; |
| |
| mxs_nand_get_layout(mtd, &l); |
| |
| fcb->fingerprint = FCB_FINGERPRINT; |
| fcb->version = FCB_VERSION_1; |
| |
| fcb->datasetup = 80; |
| fcb->datahold = 60; |
| fcb->addr_setup = 25; |
| fcb->dsample_time = 6; |
| |
| fcb->pagesize = mtd->writesize; |
| fcb->oob_pagesize = mtd->writesize + mtd->oobsize; |
| fcb->sectors = mtd->erasesize / mtd->writesize; |
| |
| fcb->meta_size = l.meta_size; |
| fcb->nr_blocks = l.nblocks; |
| fcb->ecc_nr = l.data0_size; |
| fcb->ecc_level = l.ecc0; |
| fcb->ecc_size = l.datan_size; |
| fcb->ecc_type = l.eccn; |
| fcb->bchtype = l.gf_len; |
| |
| /* DBBT search area starts from the next block after all FCB */ |
| fcb->dbbt_start = boot_cfg->search_area_size_in_pages; |
| |
| fcb->bb_byte = nand_info->bch_geometry.block_mark_byte_offset; |
| fcb->bb_start_bit = nand_info->bch_geometry.block_mark_bit_offset; |
| |
| fcb->phy_offset = mtd->writesize; |
| |
| fcb->disbbm = 0; |
| |
| fcb->fw1_start = CONV_TO_PAGES(boot_cfg->boot_stream1_address); |
| fcb->fw2_start = CONV_TO_PAGES(boot_cfg->boot_stream2_address); |
| fcb->fw1_pages = CONV_TO_PAGES(boot_cfg->boot_stream1_size); |
| fcb->fw2_pages = CONV_TO_PAGES(boot_cfg->boot_stream2_size); |
| |
| fcb->checksum = calc_chksum((void *)fcb + 4, sizeof(*fcb) - 4); |
| } |
| |
| static int fill_dbbt_data(struct mtd_info *mtd, void *buf, int num_blocks) |
| { |
| int n, n_bad_blocks = 0; |
| u32 *bb = buf + 0x8; |
| u32 *n_bad_blocksp = buf + 0x4; |
| |
| for (n = 0; n < num_blocks; n++) { |
| loff_t offset = (loff_t)n * mtd->erasesize; |
| if (mtd_block_isbad(mtd, offset)) { |
| n_bad_blocks++; |
| *bb = n; |
| bb++; |
| } |
| } |
| |
| *n_bad_blocksp = n_bad_blocks; |
| |
| return n_bad_blocks; |
| } |
| |
| /* |
| * return 1 - bad block |
| * return 0 - read successfully |
| * return < 0 - read failed |
| */ |
| static int read_fcb(struct boot_config *boot_cfg, struct fcb_block *fcb, |
| loff_t off) |
| { |
| struct mtd_info *mtd; |
| void *fcb_raw_page; |
| size_t size; |
| int ret = 0; |
| |
| mtd = boot_cfg->mtd; |
| if (mtd_block_isbad(mtd, off)) { |
| printf("Block %d is bad, skipped\n", (int)CONV_TO_BLOCKS(off)); |
| return 1; |
| } |
| |
| fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL); |
| if (!fcb_raw_page) { |
| debug("failed to allocate fcb_raw_page\n"); |
| ret = -ENOMEM; |
| return ret; |
| } |
| |
| /* |
| * User BCH hardware to decode ECC for FCB |
| */ |
| if (plat_config.misc_flags & FCB_ENCODE_BCH) { |
| size = sizeof(struct fcb_block); |
| |
| /* switch nand BCH to FCB compatible settings */ |
| if (plat_config.misc_flags & FCB_ENCODE_BCH_62b) |
| mxs_nand_mode_fcb_62bit(mtd); |
| else if (plat_config.misc_flags & FCB_ENCODE_BCH_40b) |
| mxs_nand_mode_fcb_40bit(mtd); |
| |
| ret = nand_read(mtd, off, &size, (u_char *)fcb); |
| |
| /* switch BCH back */ |
| mxs_nand_mode_normal(mtd); |
| printf("NAND FCB read from 0x%llx offset 0x%zx read: %s\n", |
| off, size, ret ? "ERROR" : "OK"); |
| |
| } else if (plat_config.misc_flags & FCB_ENCODE_HAMMING) { |
| /* raw read*/ |
| mtd_oob_ops_t ops = { |
| .datbuf = (u8 *)fcb_raw_page, |
| .oobbuf = ((u8 *)fcb_raw_page) + mtd->writesize, |
| .len = mtd->writesize, |
| .ooblen = mtd->oobsize, |
| .mode = MTD_OPS_RAW |
| }; |
| |
| ret = mtd_read_oob(mtd, off, &ops); |
| printf("NAND FCB read from 0x%llx offset 0x%zx read: %s\n", |
| off, ops.len, ret ? "ERROR" : "OK"); |
| } |
| |
| if (ret) |
| goto fcb_raw_page_err; |
| |
| if ((plat_config.misc_flags & FCB_ENCODE_HAMMING) && |
| (plat_config.misc_flags & FCB_LAYOUT_RESV_12B)) |
| memcpy(fcb, fcb_raw_page + 12, sizeof(struct fcb_block)); |
| |
| /* TODO: check if it can pass Hamming check */ |
| |
| fcb_raw_page_err: |
| kfree(fcb_raw_page); |
| |
| return ret; |
| } |
| |
| static int write_fcb(struct boot_config *boot_cfg, struct fcb_block *fcb) |
| { |
| struct mtd_info *mtd; |
| void *fcb_raw_page = NULL; |
| int i, ret = 0; |
| loff_t off; |
| size_t size; |
| |
| mtd = boot_cfg->mtd; |
| |
| /* |
| * We prepare raw page only for i.MX6, for i.MX7 we |
| * leverage BCH hw module instead |
| */ |
| if ((plat_config.misc_flags & FCB_ENCODE_HAMMING) && |
| (plat_config.misc_flags & FCB_LAYOUT_RESV_12B)) { |
| fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize, |
| GFP_KERNEL); |
| if (!fcb_raw_page) { |
| debug("failed to allocate fcb_raw_page\n"); |
| ret = -ENOMEM; |
| return ret; |
| } |
| |
| #if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) |
| /* 40 bit BCH, for i.MX6UL(L) */ |
| encode_bch_ecc(fcb_raw_page + 32, fcb, 40); |
| #else |
| memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block)); |
| encode_hamming_13_8(fcb_raw_page + 12, |
| fcb_raw_page + 12 + 512, 512); |
| #endif |
| /* |
| * Set the first and second byte of OOB data to 0xFF, |
| * not 0x00. These bytes are used as the Manufacturers Bad |
| * Block Marker (MBBM). Since the FCB is mostly written to |
| * the first page in a block, a scan for |
| * factory bad blocks will detect these blocks as bad, e.g. |
| * when function nand_scan_bbt() is executed to build a new |
| * bad block table. |
| */ |
| memset(fcb_raw_page + mtd->writesize, 0xFF, 2); |
| } |
| |
| /* start writing FCB from the very beginning */ |
| off = 0; |
| |
| for (i = 0; i < g_boot_search_count; i++) { |
| if (mtd_block_isbad(mtd, off)) { |
| printf("Block %d is bad, skipped\n", i); |
| continue; |
| } |
| |
| /* |
| * User BCH hardware module to generate ECC for FCB |
| */ |
| if (plat_config.misc_flags & FCB_ENCODE_BCH) { |
| size = sizeof(struct fcb_block); |
| |
| /* switch nand BCH to FCB compatible settings */ |
| if (plat_config.misc_flags & FCB_ENCODE_BCH_62b) |
| mxs_nand_mode_fcb_62bit(mtd); |
| else if (plat_config.misc_flags & FCB_ENCODE_BCH_40b) |
| mxs_nand_mode_fcb_40bit(mtd); |
| |
| ret = nand_write(mtd, off, &size, (u_char *)fcb); |
| |
| /* switch BCH back */ |
| mxs_nand_mode_normal(mtd); |
| printf("NAND FCB write to 0x%zx offset 0x%llx written: %s\n", |
| size, off, ret ? "ERROR" : "OK"); |
| |
| } else if (plat_config.misc_flags & FCB_ENCODE_HAMMING) { |
| /* raw write */ |
| mtd_oob_ops_t ops = { |
| .datbuf = (u8 *)fcb_raw_page, |
| .oobbuf = ((u8 *)fcb_raw_page) + |
| mtd->writesize, |
| .len = mtd->writesize, |
| .ooblen = mtd->oobsize, |
| .mode = MTD_OPS_RAW |
| }; |
| |
| ret = mtd_write_oob(mtd, off, &ops); |
| printf("NAND FCB write to 0x%llxx offset 0x%zx written: %s\n", off, ops.len, ret ? "ERROR" : "OK"); |
| } |
| |
| if (ret) |
| goto fcb_raw_page_err; |
| |
| /* next writing location */ |
| off += g_boot_search_stride; |
| } |
| |
| fcb_raw_page_err: |
| kfree(fcb_raw_page); |
| |
| return ret; |
| } |
| |
| /* |
| * return 1 - bad block |
| * return 0 - read successfully |
| * return < 0 - read failed |
| */ |
| static int read_dbbt(struct boot_config *boot_cfg, struct dbbt_block *dbbt, |
| void *dbbt_data_page, loff_t off) |
| { |
| size_t size; |
| struct mtd_info *mtd; |
| loff_t to; |
| int ret; |
| |
| mtd = boot_cfg->mtd; |
| |
| if (mtd_block_isbad(mtd, off)) { |
| printf("Block %d is bad, skipped\n", |
| (int)CONV_TO_BLOCKS(off)); |
| return 1; |
| } |
| |
| size = sizeof(struct dbbt_block); |
| ret = nand_read(mtd, off, &size, (u_char *)dbbt); |
| printf("NAND DBBT read from 0x%llx offset 0x%zx read: %s\n", |
| off, size, ret ? "ERROR" : "OK"); |
| if (ret) |
| return ret; |
| |
| /* dbbtpages == 0 if no bad blocks */ |
| if (dbbt->dbbtpages > 0) { |
| to = off + 4 * mtd->writesize; |
| size = mtd->writesize; |
| ret = nand_read(mtd, to, &size, dbbt_data_page); |
| printf("DBBT data read from 0x%llx offset 0x%zx read: %s\n", |
| to, size, ret ? "ERROR" : "OK"); |
| |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int write_dbbt(struct boot_config *boot_cfg, struct dbbt_block *dbbt, |
| void *dbbt_data_page) |
| { |
| int i; |
| loff_t off, to; |
| size_t size; |
| struct mtd_info *mtd; |
| int ret; |
| |
| mtd = boot_cfg->mtd; |
| |
| /* start writing DBBT after all FCBs */ |
| off = boot_cfg->search_area_size_in_bytes; |
| size = mtd->writesize; |
| |
| for (i = 0; i < g_boot_search_count; i++) { |
| if (mtd_block_isbad(mtd, off)) { |
| printf("Block %d is bad, skipped\n", |
| (int)(i + CONV_TO_BLOCKS(off))); |
| continue; |
| } |
| |
| ret = nand_write(mtd, off, &size, (u_char *)dbbt); |
| printf("NAND DBBT write to 0x%llx offset 0x%zx written: %s\n", |
| off, size, ret ? "ERROR" : "OK"); |
| if (ret) |
| return ret; |
| |
| /* dbbtpages == 0 if no bad blocks */ |
| if (dbbt->dbbtpages > 0) { |
| to = off + 4 * mtd->writesize; |
| ret = nand_write(mtd, to, &size, dbbt_data_page); |
| printf("DBBT data write to 0x%llx offset 0x%zx written: %s\n", |
| to, size, ret ? "ERROR" : "OK"); |
| |
| if (ret) |
| return ret; |
| } |
| |
| /* next writing location */ |
| off += g_boot_search_stride; |
| } |
| |
| return 0; |
| } |
| |
| /* reuse the check_skip_len from nand_util.c with minor change*/ |
| static int check_skip_length(struct boot_config *boot_cfg, loff_t offset, |
| size_t length, size_t *used) |
| { |
| struct mtd_info *mtd = boot_cfg->mtd; |
| size_t maxsize = boot_cfg->maxsize; |
| size_t len_excl_bad = 0; |
| int ret = 0; |
| |
| while (len_excl_bad < length) { |
| size_t block_len, block_off; |
| loff_t block_start; |
| |
| if (offset >= maxsize) |
| return -1; |
| |
| block_start = offset & ~(loff_t)(mtd->erasesize - 1); |
| block_off = offset & (mtd->erasesize - 1); |
| block_len = mtd->erasesize - block_off; |
| |
| if (!nand_block_isbad(mtd, block_start)) |
| len_excl_bad += block_len; |
| else |
| ret = 1; |
| |
| offset += block_len; |
| *used += block_len; |
| } |
| |
| /* If the length is not a multiple of block_len, adjust. */ |
| if (len_excl_bad > length) |
| *used -= (len_excl_bad - length); |
| |
| return ret; |
| } |
| |
| static int nandbcb_get_next_good_blk_addr(struct boot_config *boot_cfg, |
| struct boot_stream_config *bs_cfg) |
| { |
| struct mtd_info *mtd = boot_cfg->mtd; |
| loff_t offset = bs_cfg->bs_addr; |
| size_t length = bs_cfg->bs_size; |
| size_t used = 0; |
| int ret; |
| |
| ret = check_skip_length(boot_cfg, offset, length, &used); |
| |
| if (ret < 0) |
| return ret; |
| |
| /* get next image address */ |
| bs_cfg->next_bs_addr = (u32)(offset + used + mtd->erasesize - 1) |
| / (u32)mtd->erasesize * mtd->erasesize; |
| |
| return ret; |
| } |
| |
| static int nandbcb_write_bs_skip_bad(struct boot_config *boot_cfg, |
| struct boot_stream_config *bs_cfg) |
| { |
| struct mtd_info *mtd; |
| void *buf; |
| loff_t offset, maxsize; |
| size_t size; |
| size_t length; |
| int ret; |
| bool padding_flag = false; |
| |
| mtd = boot_cfg->mtd; |
| offset = bs_cfg->bs_addr; |
| maxsize = boot_cfg->maxsize; |
| size = bs_cfg->bs_size; |
| |
| /* some boot images may need leading offset */ |
| if (bs_cfg->need_padding && |
| (plat_config.misc_flags & FIRMWARE_NEED_PADDING)) |
| padding_flag = 1; |
| |
| if (padding_flag) |
| length = ALIGN(size + FLASH_OFFSET_STANDARD, mtd->writesize); |
| else |
| length = ALIGN(size, mtd->writesize); |
| |
| buf = kzalloc(length, GFP_KERNEL); |
| if (!buf) { |
| printf("failed to allocate buffer for firmware\n"); |
| ret = -ENOMEM; |
| return ret; |
| } |
| |
| if (padding_flag) |
| memcpy(buf + FLASH_OFFSET_STANDARD, bs_cfg->bs_buf, size); |
| else |
| memcpy(buf, bs_cfg->bs_buf, size); |
| |
| ret = nand_write_skip_bad(mtd, offset, &length, NULL, maxsize, |
| (u_char *)buf, WITH_WR_VERIFY); |
| printf("Write %s @0x%llx offset, 0x%zx bytes written: %s\n", |
| bs_cfg->bs_label, offset, length, ret ? "ERROR" : "OK"); |
| |
| if (ret) |
| /* write image failed, quit */ |
| goto err; |
| |
| /* get next good blk address if needed */ |
| if (bs_cfg->need_padding) { |
| ret = nandbcb_get_next_good_blk_addr(boot_cfg, bs_cfg); |
| if (ret < 0) { |
| printf("Next image cannot fit in NAND partition\n"); |
| goto err; |
| } |
| } |
| |
| /* now we know how the exact image size written to NAND */ |
| bs_cfg->bs_size = length; |
| return 0; |
| err: |
| kfree(buf); |
| return ret; |
| } |
| |
| static int nandbcb_write_fw(struct boot_config *boot_cfg, u_char *buf, |
| int index) |
| { |
| int i; |
| loff_t offset; |
| size_t size; |
| loff_t next_bs_addr; |
| struct boot_stream_config bs_cfg; |
| int ret; |
| |
| for (i = 0; i < 2; ++i) { |
| if (!(FW_INX(i) & index)) |
| continue; |
| |
| if (i == 0) { |
| offset = boot_cfg->boot_stream1_address; |
| size = boot_cfg->boot_stream1_size; |
| } else { |
| offset = boot_cfg->boot_stream2_address; |
| size = boot_cfg->boot_stream2_size; |
| } |
| |
| /* write Firmware*/ |
| if (!(plat_config.misc_flags & FIRMWARE_EXTRA_ONE)) { |
| memset(&bs_cfg, 0, sizeof(struct boot_stream_config)); |
| sprintf(bs_cfg.bs_label, "firmware%d", i); |
| bs_cfg.bs_addr = offset; |
| bs_cfg.bs_size = size; |
| bs_cfg.bs_buf = buf; |
| bs_cfg.need_padding = 1; |
| |
| ret = nandbcb_write_bs_skip_bad(boot_cfg, &bs_cfg); |
| if (ret) |
| return ret; |
| |
| /* update the boot stream size */ |
| if (i == 0) |
| boot_cfg->boot_stream1_size = bs_cfg.bs_size; |
| else |
| boot_cfg->boot_stream2_size = bs_cfg.bs_size; |
| |
| } else { |
| /* some platforms need extra firmware */ |
| memset(&bs_cfg, 0, sizeof(struct boot_stream_config)); |
| sprintf(bs_cfg.bs_label, "fw%d_part%d", i, 1); |
| bs_cfg.bs_addr = offset; |
| bs_cfg.bs_size = IMX8MQ_HDMI_FW_SZ; |
| bs_cfg.bs_buf = buf; |
| bs_cfg.need_padding = 1; |
| |
| ret = nandbcb_write_bs_skip_bad(boot_cfg, &bs_cfg); |
| if (ret) |
| return ret; |
| |
| /* update the boot stream size */ |
| if (i == 0) |
| boot_cfg->boot_stream1_size = bs_cfg.bs_size; |
| else |
| boot_cfg->boot_stream2_size = bs_cfg.bs_size; |
| |
| /* get next image address */ |
| next_bs_addr = bs_cfg.next_bs_addr; |
| |
| memset(&bs_cfg, 0, sizeof(struct boot_stream_config)); |
| sprintf(bs_cfg.bs_label, "fw%d_part%d", i, 2); |
| bs_cfg.bs_addr = next_bs_addr; |
| bs_cfg.bs_size = IMX8MQ_SPL_SZ; |
| bs_cfg.bs_buf = (u_char *)(buf + IMX8MQ_HDMI_FW_SZ); |
| bs_cfg.need_padding = 0; |
| |
| ret = nandbcb_write_bs_skip_bad(boot_cfg, &bs_cfg); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int nandbcb_init(struct boot_config *boot_cfg, u_char *buf) |
| { |
| struct mtd_info *mtd; |
| nand_erase_options_t opts; |
| struct fcb_block *fcb; |
| struct dbbt_block *dbbt; |
| void *dbbt_page, *dbbt_data_page; |
| int ret; |
| loff_t maxsize, off; |
| |
| mtd = boot_cfg->mtd; |
| maxsize = boot_cfg->maxsize; |
| off = boot_cfg->offset; |
| |
| /* erase */ |
| memset(&opts, 0, sizeof(opts)); |
| opts.offset = off; |
| opts.length = maxsize - 1; |
| ret = nand_erase_opts(mtd, &opts); |
| if (ret) { |
| printf("%s: erase failed (ret = %d)\n", __func__, ret); |
| return ret; |
| } |
| |
| /* |
| * Reference documentation from i.MX6DQRM section 8.5.2.2 |
| * |
| * Nand Boot Control Block(BCB) contains two data structures, |
| * - Firmware Configuration Block(FCB) |
| * - Discovered Bad Block Table(DBBT) |
| * |
| * FCB contains, |
| * - nand timings |
| * - DBBT search page address, |
| * - start page address of primary firmware |
| * - start page address of secondary firmware |
| * |
| * setup fcb: |
| * - number of blocks = mtd partition size / mtd erasesize |
| * - two firmware blocks, primary and secondary |
| * - first 4 block for FCB/DBBT |
| * - rest split in half for primary and secondary firmware |
| * - same firmware write twice |
| */ |
| |
| /* write Firmware*/ |
| ret = nandbcb_write_fw(boot_cfg, buf, FW_ALL); |
| if (ret) |
| goto err; |
| |
| /* fill fcb */ |
| fcb = kzalloc(sizeof(*fcb), GFP_KERNEL); |
| if (!fcb) { |
| debug("failed to allocate fcb\n"); |
| ret = -ENOMEM; |
| return ret; |
| } |
| fill_fcb(fcb, boot_cfg); |
| |
| ret = write_fcb(boot_cfg, fcb); |
| |
| /* fill dbbt */ |
| dbbt_page = kzalloc(mtd->writesize, GFP_KERNEL); |
| if (!dbbt_page) { |
| debug("failed to allocate dbbt_page\n"); |
| ret = -ENOMEM; |
| goto fcb_err; |
| } |
| |
| dbbt_data_page = kzalloc(mtd->writesize, GFP_KERNEL); |
| if (!dbbt_data_page) { |
| debug("failed to allocate dbbt_data_page\n"); |
| ret = -ENOMEM; |
| goto dbbt_page_err; |
| } |
| |
| dbbt = dbbt_page; |
| dbbt->checksum = 0; |
| dbbt->fingerprint = DBBT_FINGERPRINT; |
| dbbt->version = DBBT_VERSION_1; |
| ret = fill_dbbt_data(mtd, dbbt_data_page, CONV_TO_BLOCKS(maxsize)); |
| if (ret < 0) |
| goto dbbt_data_page_err; |
| else if (ret > 0) |
| dbbt->dbbtpages = 1; |
| |
| /* write dbbt */ |
| ret = write_dbbt(boot_cfg, dbbt, dbbt_data_page); |
| if (ret < 0) |
| printf("failed to write FCB/DBBT\n"); |
| |
| dbbt_data_page_err: |
| kfree(dbbt_data_page); |
| dbbt_page_err: |
| kfree(dbbt_page); |
| fcb_err: |
| kfree(fcb); |
| err: |
| return ret; |
| } |
| |
| static int do_nandbcb_bcbonly(int argc, char *const argv[]) |
| { |
| struct fcb_block *fcb; |
| struct dbbt_block *dbbt; |
| struct mtd_info *mtd; |
| nand_erase_options_t opts; |
| size_t maxsize; |
| loff_t off; |
| void *dbbt_page, *dbbt_data_page; |
| int ret; |
| struct boot_config cfg; |
| |
| if (argc < 4) |
| return CMD_RET_USAGE; |
| |
| memset(&cfg, 0, sizeof(struct boot_config)); |
| if (nandbcb_get_info(argc, argv, &cfg)) |
| return CMD_RET_FAILURE; |
| |
| /* only get the partition info */ |
| if (nandbcb_get_size(2, argv, 1, &cfg)) |
| return CMD_RET_FAILURE; |
| |
| if (nandbcb_set_boot_config(argc, argv, &cfg)) |
| return CMD_RET_FAILURE; |
| |
| mtd = cfg.mtd; |
| |
| cfg.boot_stream1_address = simple_strtoul(argv[2], NULL, 16); |
| cfg.boot_stream1_size = simple_strtoul(argv[3], NULL, 16); |
| cfg.boot_stream1_size = ALIGN(cfg.boot_stream1_size, mtd->writesize); |
| |
| if (argc > 5) { |
| cfg.boot_stream2_address = simple_strtoul(argv[4], NULL, 16); |
| cfg.boot_stream2_size = simple_strtoul(argv[5], NULL, 16); |
| cfg.boot_stream2_size = ALIGN(cfg.boot_stream2_size, |
| mtd->writesize); |
| } |
| |
| /* sanity check */ |
| nandbcb_check_space(&cfg); |
| |
| maxsize = cfg.maxsize; |
| off = cfg.offset; |
| |
| /* erase the previous FCB/DBBT */ |
| memset(&opts, 0, sizeof(opts)); |
| opts.offset = off; |
| opts.length = g_boot_search_stride * 2; |
| ret = nand_erase_opts(mtd, &opts); |
| if (ret) { |
| printf("%s: erase failed (ret = %d)\n", __func__, ret); |
| return CMD_RET_FAILURE; |
| } |
| |
| /* fill fcb */ |
| fcb = kzalloc(sizeof(*fcb), GFP_KERNEL); |
| if (!fcb) { |
| printf("failed to allocate fcb\n"); |
| ret = -ENOMEM; |
| return CMD_RET_FAILURE; |
| } |
| |
| fill_fcb(fcb, &cfg); |
| |
| /* write fcb */ |
| ret = write_fcb(&cfg, fcb); |
| |
| /* fill dbbt */ |
| dbbt_page = kzalloc(mtd->writesize, GFP_KERNEL); |
| if (!dbbt_page) { |
| printf("failed to allocate dbbt_page\n"); |
| ret = -ENOMEM; |
| goto fcb_err; |
| } |
| |
| dbbt_data_page = kzalloc(mtd->writesize, GFP_KERNEL); |
| if (!dbbt_data_page) { |
| printf("failed to allocate dbbt_data_page\n"); |
| ret = -ENOMEM; |
| goto dbbt_page_err; |
| } |
| |
| dbbt = dbbt_page; |
| dbbt->checksum = 0; |
| dbbt->fingerprint = DBBT_FINGERPRINT; |
| dbbt->version = DBBT_VERSION_1; |
| ret = fill_dbbt_data(mtd, dbbt_data_page, CONV_TO_BLOCKS(maxsize)); |
| if (ret < 0) |
| goto dbbt_data_page_err; |
| else if (ret > 0) |
| dbbt->dbbtpages = 1; |
| |
| /* write dbbt */ |
| ret = write_dbbt(&cfg, dbbt, dbbt_data_page); |
| |
| dbbt_data_page_err: |
| kfree(dbbt_data_page); |
| dbbt_page_err: |
| kfree(dbbt_page); |
| fcb_err: |
| kfree(fcb); |
| |
| if (ret < 0) { |
| printf("failed to write FCB/DBBT\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| /* dump data which is read from NAND chip */ |
| void dump_structure(struct boot_config *boot_cfg, struct fcb_block *fcb, |
| struct dbbt_block *dbbt, void *dbbt_data_page) |
| { |
| int i; |
| struct mtd_info *mtd = boot_cfg->mtd; |
| |
| #define P1(x) printf(" %s = 0x%08x\n", #x, fcb->x) |
| printf("FCB\n"); |
| P1(checksum); |
| P1(fingerprint); |
| P1(version); |
| #undef P1 |
| #define P1(x) printf(" %s = %d\n", #x, fcb->x) |
| P1(datasetup); |
| P1(datahold); |
| P1(addr_setup); |
| P1(dsample_time); |
| P1(pagesize); |
| P1(oob_pagesize); |
| P1(sectors); |
| P1(nr_nand); |
| P1(nr_die); |
| P1(celltype); |
| P1(ecc_type); |
| P1(ecc_nr); |
| P1(ecc_size); |
| P1(ecc_level); |
| P1(meta_size); |
| P1(nr_blocks); |
| P1(ecc_type_sdk); |
| P1(ecc_nr_sdk); |
| P1(ecc_size_sdk); |
| P1(ecc_level_sdk); |
| P1(nr_blocks_sdk); |
| P1(meta_size_sdk); |
| P1(erase_th); |
| P1(bootpatch); |
| P1(patch_size); |
| P1(fw1_start); |
| P1(fw2_start); |
| P1(fw1_pages); |
| P1(fw2_pages); |
| P1(dbbt_start); |
| P1(bb_byte); |
| P1(bb_start_bit); |
| P1(phy_offset); |
| P1(bchtype); |
| P1(readlatency); |
| P1(predelay); |
| P1(cedelay); |
| P1(postdelay); |
| P1(cmdaddpause); |
| P1(datapause); |
| P1(tmspeed); |
| P1(busytimeout); |
| P1(disbbm); |
| P1(spare_offset); |
| #if !defined(CONFIG_MX6) || defined(CONFIG_MX6SX) || \ |
| defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) |
| P1(onfi_sync_enable); |
| P1(onfi_sync_speed); |
| P1(onfi_sync_nand_data); |
| P1(disbbm_search); |
| P1(disbbm_search_limit); |
| P1(read_retry_enable); |
| #endif |
| #undef P1 |
| #define P1(x) printf(" %s = 0x%08x\n", #x, dbbt->x) |
| printf("DBBT :\n"); |
| P1(checksum); |
| P1(fingerprint); |
| P1(version); |
| #undef P1 |
| #define P1(x) printf(" %s = %d\n", #x, dbbt->x) |
| P1(dbbtpages); |
| #undef P1 |
| |
| for (i = 0; i < dbbt->dbbtpages; ++i) |
| printf("%d ", *((u32 *)(dbbt_data_page + i))); |
| |
| if (!(plat_config.misc_flags & FIRMWARE_EXTRA_ONE)) { |
| printf("Firmware: image #0 @ 0x%x size 0x%x\n", |
| fcb->fw1_start, fcb->fw1_pages * mtd->writesize); |
| printf("Firmware: image #1 @ 0x%x size 0x%x\n", |
| fcb->fw2_start, fcb->fw2_pages * mtd->writesize); |
| } else { |
| printf("Firmware: image #0 @ 0x%x size 0x%x\n", |
| fcb->fw1_start, fcb->fw1_pages * mtd->writesize); |
| printf("Firmware: image #1 @ 0x%x size 0x%x\n", |
| fcb->fw2_start, fcb->fw2_pages * mtd->writesize); |
| /* TODO: Add extra image information */ |
| } |
| } |
| |
| static bool check_fingerprint(void *data, int fingerprint) |
| { |
| int off = 4; |
| |
| return (*(int *)(data + off) == fingerprint); |
| } |
| |
| static int fuse_to_search_count(u32 bank, u32 word, u32 mask, u32 off) |
| { |
| int err; |
| u32 val; |
| int ret; |
| |
| /* by default, the boot search count from fuse should be 2 */ |
| err = fuse_read(bank, word, &val); |
| if (err) |
| return 2; |
| |
| val = (val & mask) >> off; |
| |
| switch (val) { |
| case 0: |
| ret = 2; |
| break; |
| case 1: |
| case 2: |
| case 3: |
| ret = 1 << val; |
| break; |
| default: |
| ret = 2; |
| } |
| |
| return ret; |
| } |
| |
| static int nandbcb_dump(struct boot_config *boot_cfg) |
| { |
| int i; |
| loff_t off; |
| struct mtd_info *mtd = boot_cfg->mtd; |
| struct fcb_block fcb, fcb_copy; |
| struct dbbt_block dbbt, dbbt_copy; |
| void *dbbt_data_page, *dbbt_data_page_copy; |
| bool fcb_not_found, dbbt_not_found; |
| int ret = 0; |
| |
| dbbt_data_page = kzalloc(mtd->writesize, GFP_KERNEL); |
| if (!dbbt_data_page) { |
| printf("failed to allocate dbbt_data_page\n"); |
| ret = -ENOMEM; |
| return ret; |
| } |
| |
| dbbt_data_page_copy = kzalloc(mtd->writesize, GFP_KERNEL); |
| if (!dbbt_data_page_copy) { |
| printf("failed to allocate dbbt_data_page\n"); |
| ret = -ENOMEM; |
| goto dbbt_page_err; |
| } |
| |
| /* read fcb */ |
| fcb_not_found = 1; |
| off = 0; |
| for (i = 0; i < g_boot_search_count; ++i) { |
| if (fcb_not_found) { |
| ret = read_fcb(boot_cfg, &fcb, off); |
| |
| if (ret < 0) |
| goto dbbt_page_copy_err; |
| else if (ret == 1) |
| continue; |
| else if (ret == 0) |
| if (check_fingerprint(&fcb, FCB_FINGERPRINT)) |
| fcb_not_found = 0; |
| } else { |
| ret = read_fcb(boot_cfg, &fcb_copy, off); |
| |
| if (ret < 0) |
| goto dbbt_page_copy_err; |
| if (memcmp(&fcb, &fcb_copy, |
| sizeof(struct fcb_block))) { |
| printf("FCB copies are not identical\n"); |
| ret = -EINVAL; |
| goto dbbt_page_copy_err; |
| } |
| } |
| |
| /* next read location */ |
| off += g_boot_search_stride; |
| } |
| |
| /* read dbbt*/ |
| dbbt_not_found = 1; |
| off = boot_cfg->search_area_size_in_bytes; |
| for (i = 0; i < g_boot_search_count; ++i) { |
| if (dbbt_not_found) { |
| ret = read_dbbt(boot_cfg, &dbbt, dbbt_data_page, off); |
| |
| if (ret < 0) |
| goto dbbt_page_copy_err; |
| else if (ret == 1) |
| continue; |
| else if (ret == 0) |
| if (check_fingerprint(&dbbt, DBBT_FINGERPRINT)) |
| dbbt_not_found = 0; |
| } else { |
| ret = read_dbbt(boot_cfg, &dbbt_copy, |
| dbbt_data_page_copy, off); |
| |
| if (ret < 0) |
| goto dbbt_page_copy_err; |
| if (memcmp(&dbbt, &dbbt_copy, |
| sizeof(struct dbbt_block))) { |
| printf("DBBT copies are not identical\n"); |
| ret = -EINVAL; |
| goto dbbt_page_copy_err; |
| } |
| if (dbbt.dbbtpages > 0 && |
| memcmp(dbbt_data_page, dbbt_data_page_copy, |
| mtd->writesize)) { |
| printf("DBBT data copies are not identical\n"); |
| ret = -EINVAL; |
| goto dbbt_page_copy_err; |
| } |
| } |
| |
| /* next read location */ |
| off += g_boot_search_stride; |
| } |
| |
| dump_structure(boot_cfg, &fcb, &dbbt, dbbt_data_page); |
| |
| dbbt_page_copy_err: |
| kfree(dbbt_data_page_copy); |
| dbbt_page_err: |
| kfree(dbbt_data_page); |
| |
| return ret; |
| } |
| |
| static int do_nandbcb_dump(int argc, char * const argv[]) |
| { |
| struct boot_config cfg; |
| int ret; |
| |
| if (argc != 2) |
| return CMD_RET_USAGE; |
| |
| memset(&cfg, 0, sizeof(struct boot_config)); |
| if (nandbcb_get_info(argc, argv, &cfg)) |
| return CMD_RET_FAILURE; |
| |
| if (nandbcb_get_size(argc, argv, 1, &cfg)) |
| return CMD_RET_FAILURE; |
| |
| if (nandbcb_set_boot_config(argc, argv, &cfg)) |
| return CMD_RET_FAILURE; |
| |
| ret = nandbcb_dump(&cfg); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| static int do_nandbcb_init(int argc, char * const argv[]) |
| { |
| u_char *buf; |
| size_t size; |
| loff_t addr; |
| char *endp; |
| int ret; |
| struct boot_config cfg; |
| |
| if (argc != 4) |
| return CMD_RET_USAGE; |
| |
| memset(&cfg, 0, sizeof(struct boot_config)); |
| if (nandbcb_get_info(argc, argv, &cfg)) |
| return CMD_RET_FAILURE; |
| |
| if (nandbcb_get_size(argc, argv, 2, &cfg)) |
| return CMD_RET_FAILURE; |
| size = cfg.boot_stream1_size; |
| |
| if (nandbcb_set_boot_config(argc, argv, &cfg)) |
| return CMD_RET_FAILURE; |
| |
| addr = simple_strtoul(argv[1], &endp, 16); |
| if (*argv[1] == 0 || *endp != 0) |
| return CMD_RET_FAILURE; |
| |
| buf = map_physmem(addr, size, MAP_WRBACK); |
| if (!buf) { |
| puts("failed to map physical memory\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| ret = nandbcb_init(&cfg, buf); |
| |
| return ret == 0 ? CMD_RET_SUCCESS : CMD_RET_FAILURE; |
| } |
| |
| static int do_nandbcb(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| const char *cmd; |
| int ret = 0; |
| |
| if (argc < 3) |
| goto usage; |
| |
| /* check the platform config first */ |
| if (is_mx6sx()) { |
| plat_config = imx6sx_plat_config; |
| } else if (is_mx7()) { |
| plat_config = imx7d_plat_config; |
| } else if (is_mx6ul() || is_mx6ull()) { |
| plat_config = imx6ul_plat_config; |
| } else if (is_mx6() && !is_mx6sx() && !is_mx6ul() && !is_mx6ull()) { |
| plat_config = imx6qdl_plat_config; |
| } else if (is_imx8mq()) { |
| plat_config = imx8mq_plat_config; |
| } else if (is_imx8mm()) { |
| plat_config = imx8mm_plat_config; |
| } else if (is_imx8mn() || is_imx8mp()) { |
| plat_config = imx8mn_plat_config; |
| } else if (is_imx8qm() || is_imx8qxp()) { |
| plat_config = imx8q_plat_config; |
| } else { |
| printf("ERROR: Unknown platform\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| if ((plat_config.misc_flags) & BT_SEARCH_CNT_FROM_FUSE) { |
| if (is_imx8qxp()) |
| g_boot_search_count = fuse_to_search_count(0, 720, 0xc0, 6); |
| if (is_imx8mn() || is_imx8mp()) |
| g_boot_search_count = fuse_to_search_count(2, 2, 0x6000, 13); |
| printf("search count set to %d from fuse\n", |
| g_boot_search_count); |
| } |
| |
| cmd = argv[1]; |
| --argc; |
| ++argv; |
| |
| if (strcmp(cmd, "init") == 0) { |
| ret = do_nandbcb_init(argc, argv); |
| goto done; |
| } |
| |
| if (strcmp(cmd, "dump") == 0) { |
| ret = do_nandbcb_dump(argc, argv); |
| goto done; |
| } |
| |
| if (strcmp(cmd, "bcbonly") == 0) { |
| ret = do_nandbcb_bcbonly(argc, argv); |
| goto done; |
| } |
| |
| done: |
| if (ret != -1) |
| return ret; |
| usage: |
| return CMD_RET_USAGE; |
| } |
| |
| #ifdef CONFIG_SYS_LONGHELP |
| static char nandbcb_help_text[] = |
| "init addr off|partition len - update 'len' bytes starting at\n" |
| " 'off|part' to memory address 'addr', skipping bad blocks\n" |
| "nandbcb bcbonly off|partition fw1-off fw1-size [fw2-off fw2-size]\n" |
| " - write BCB only (FCB and DBBT)\n" |
| " where `fwx-size` is fw sizes in bytes, `fw1-off`\n" |
| " and `fw2-off` - firmware offsets\n" |
| " FIY, BCB isn't erased automatically, so mtd erase should\n" |
| " be called in advance before writing new BCB:\n" |
| " > mtd erase mx7-bcb\n" |
| "nandbcb dump off|partition - dump/verify boot structures\n"; |
| #endif |
| |
| U_BOOT_CMD(nandbcb, 7, 1, do_nandbcb, |
| "i.MX NAND Boot Control Blocks write", |
| nandbcb_help_text |
| ); |