| // SPDX-License-Identifier: GPL-2.0+ |
| |
| #include <common.h> |
| #include <linux/errno.h> |
| #include <linux/delay.h> |
| #include <asm/gpio.h> |
| #include <linux/list.h> |
| #include <linux/bitfield.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <malloc.h> |
| #include <spi.h> |
| #include <dm.h> |
| #include <g_dnl.h> |
| |
| #define MAX3420_MAX_EPS 4 |
| #define EP_MAX_PACKET 64 /* Same for all Endpoints */ |
| #define EPNAME_SIZE 16 /* Buffer size for endpoint name */ |
| |
| #define MAX3420_SPI_DIR_RD 0 /* read register from MAX3420 */ |
| #define MAX3420_SPI_DIR_WR 1 /* write register to MAX3420 */ |
| |
| /* SPI commands: */ |
| #define MAX3420_SPI_ACK_MASK BIT(0) |
| #define MAX3420_SPI_DIR_MASK BIT(1) |
| #define MAX3420_SPI_REG_MASK GENMASK(7, 3) |
| |
| #define MAX3420_REG_EP0FIFO 0 |
| #define MAX3420_REG_EP1FIFO 1 |
| #define MAX3420_REG_EP2FIFO 2 |
| #define MAX3420_REG_EP3FIFO 3 |
| #define MAX3420_REG_SUDFIFO 4 |
| #define MAX3420_REG_EP0BC 5 |
| #define MAX3420_REG_EP1BC 6 |
| #define MAX3420_REG_EP2BC 7 |
| #define MAX3420_REG_EP3BC 8 |
| |
| #define MAX3420_REG_EPSTALLS 9 |
| #define bACKSTAT BIT(6) |
| #define bSTLSTAT BIT(5) |
| #define bSTLEP3IN BIT(4) |
| #define bSTLEP2IN BIT(3) |
| #define bSTLEP1OUT BIT(2) |
| #define bSTLEP0OUT BIT(1) |
| #define bSTLEP0IN BIT(0) |
| |
| #define MAX3420_REG_CLRTOGS 10 |
| #define bEP3DISAB BIT(7) |
| #define bEP2DISAB BIT(6) |
| #define bEP1DISAB BIT(5) |
| #define bCTGEP3IN BIT(4) |
| #define bCTGEP2IN BIT(3) |
| #define bCTGEP1OUT BIT(2) |
| |
| #define MAX3420_REG_EPIRQ 11 |
| #define MAX3420_REG_EPIEN 12 |
| #define bSUDAVIRQ BIT(5) |
| #define bIN3BAVIRQ BIT(4) |
| #define bIN2BAVIRQ BIT(3) |
| #define bOUT1DAVIRQ BIT(2) |
| #define bOUT0DAVIRQ BIT(1) |
| #define bIN0BAVIRQ BIT(0) |
| |
| #define MAX3420_REG_USBIRQ 13 |
| #define MAX3420_REG_USBIEN 14 |
| #define bOSCOKIRQ BIT(0) |
| #define bRWUDNIRQ BIT(1) |
| #define bBUSACTIRQ BIT(2) |
| #define bURESIRQ BIT(3) |
| #define bSUSPIRQ BIT(4) |
| #define bNOVBUSIRQ BIT(5) |
| #define bVBUSIRQ BIT(6) |
| #define bURESDNIRQ BIT(7) |
| |
| #define MAX3420_REG_USBCTL 15 |
| #define bHOSCSTEN BIT(7) |
| #define bVBGATE BIT(6) |
| #define bCHIPRES BIT(5) |
| #define bPWRDOWN BIT(4) |
| #define bCONNECT BIT(3) |
| #define bSIGRWU BIT(2) |
| |
| #define MAX3420_REG_CPUCTL 16 |
| #define bIE BIT(0) |
| |
| #define MAX3420_REG_PINCTL 17 |
| #define bEP3INAK BIT(7) |
| #define bEP2INAK BIT(6) |
| #define bEP0INAK BIT(5) |
| #define bFDUPSPI BIT(4) |
| #define bINTLEVEL BIT(3) |
| #define bPOSINT BIT(2) |
| #define bGPXB BIT(1) |
| #define bGPXA BIT(0) |
| |
| #define MAX3420_REG_REVISION 18 |
| |
| #define MAX3420_REG_FNADDR 19 |
| #define FNADDR_MASK 0x7f |
| |
| #define MAX3420_REG_IOPINS 20 |
| #define MAX3420_REG_IOPINS2 21 |
| #define MAX3420_REG_GPINIRQ 22 |
| #define MAX3420_REG_GPINIEN 23 |
| #define MAX3420_REG_GPINPOL 24 |
| #define MAX3420_REG_HIRQ 25 |
| #define MAX3420_REG_HIEN 26 |
| #define MAX3420_REG_MODE 27 |
| #define MAX3420_REG_PERADDR 28 |
| #define MAX3420_REG_HCTL 29 |
| #define MAX3420_REG_HXFR 30 |
| #define MAX3420_REG_HRSL 31 |
| |
| struct max3420_req { |
| struct usb_request usb_req; |
| struct list_head queue; |
| struct max3420_ep *ep; |
| }; |
| |
| struct max3420_ep { |
| struct max3420_udc *udc; |
| struct list_head queue; |
| char name[EPNAME_SIZE]; |
| unsigned int maxpacket; |
| struct usb_ep ep_usb; |
| int halted; |
| int id; |
| }; |
| |
| struct max3420_udc { |
| struct max3420_ep ep[MAX3420_MAX_EPS]; |
| struct usb_gadget_driver *driver; |
| bool softconnect; |
| struct usb_ctrlrequest setup; |
| struct max3420_req ep0req; |
| struct usb_gadget gadget; |
| struct spi_slave *slave; |
| struct udevice *dev; |
| u8 ep0buf[64]; |
| int remote_wkp; |
| bool suspended; |
| }; |
| |
| #define to_max3420_req(r) container_of((r), struct max3420_req, usb_req) |
| #define to_max3420_ep(e) container_of((e), struct max3420_ep, ep_usb) |
| #define to_udc(g) container_of((g), struct max3420_udc, gadget) |
| |
| static void spi_ack_ctrl(struct max3420_udc *udc) |
| { |
| struct spi_slave *slave = udc->slave; |
| u8 txdata[1]; |
| |
| txdata[0] = FIELD_PREP(MAX3420_SPI_ACK_MASK, 1); |
| spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_ONCE); |
| } |
| |
| static u8 spi_rd8_ack(struct max3420_udc *udc, u8 reg, int ackstat) |
| { |
| struct spi_slave *slave = udc->slave; |
| u8 txdata[2], rxdata[2]; |
| |
| txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) | |
| FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_RD) | |
| FIELD_PREP(MAX3420_SPI_ACK_MASK, ackstat ? 1 : 0); |
| |
| rxdata[0] = 0; |
| rxdata[1] = 0; |
| spi_xfer(slave, sizeof(txdata), txdata, rxdata, SPI_XFER_ONCE); |
| |
| return rxdata[1]; |
| } |
| |
| static u8 spi_rd8(struct max3420_udc *udc, u8 reg) |
| { |
| return spi_rd8_ack(udc, reg, 0); |
| } |
| |
| static void spi_wr8_ack(struct max3420_udc *udc, u8 reg, u8 val, int ackstat) |
| { |
| struct spi_slave *slave = udc->slave; |
| u8 txdata[2]; |
| |
| txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) | |
| FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_WR) | |
| FIELD_PREP(MAX3420_SPI_ACK_MASK, ackstat ? 1 : 0); |
| txdata[1] = val; |
| |
| spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_ONCE); |
| } |
| |
| static void spi_wr8(struct max3420_udc *udc, u8 reg, u8 val) |
| { |
| spi_wr8_ack(udc, reg, val, 0); |
| } |
| |
| static void spi_rd_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len) |
| { |
| struct spi_slave *slave = udc->slave; |
| u8 txdata[1]; |
| |
| txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) | |
| FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_RD); |
| |
| spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_BEGIN); |
| spi_xfer(slave, len * 8, NULL, buf, SPI_XFER_END); |
| } |
| |
| static void spi_wr_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len) |
| { |
| struct spi_slave *slave = udc->slave; |
| u8 txdata[1]; |
| |
| txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) | |
| FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_WR); |
| |
| spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_BEGIN); |
| spi_xfer(slave, len * 8, buf, NULL, SPI_XFER_END); |
| } |
| |
| /* 0 if not-connected */ |
| int g_dnl_board_usb_cable_connected(void) |
| { |
| return 1; |
| } |
| |
| static void spi_max3420_enable(struct max3420_ep *ep, int enable) |
| { |
| struct max3420_udc *udc = ep->udc; |
| u8 epdis, epien; |
| |
| if (ep->id == 0) |
| return; |
| |
| epien = spi_rd8(udc, MAX3420_REG_EPIEN); |
| epdis = spi_rd8(udc, MAX3420_REG_CLRTOGS); |
| |
| if (enable) { |
| epdis &= ~BIT(ep->id + 4); |
| epien |= BIT(ep->id + 1); |
| } else { |
| epdis |= BIT(ep->id + 4); |
| epien &= ~BIT(ep->id + 1); |
| } |
| |
| spi_wr8(udc, MAX3420_REG_CLRTOGS, epdis); |
| spi_wr8(udc, MAX3420_REG_EPIEN, epien); |
| } |
| |
| static int |
| max3420_ep_enable(struct usb_ep *_ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct max3420_ep *ep = to_max3420_ep(_ep); |
| |
| _ep->desc = desc; |
| _ep->maxpacket = usb_endpoint_maxp(desc) & 0x7ff; |
| |
| spi_max3420_enable(ep, 1); |
| |
| return 0; |
| } |
| |
| static void max3420_req_done(struct max3420_req *req, int status) |
| { |
| struct max3420_ep *ep = req->ep; |
| |
| if (req->usb_req.status == -EINPROGRESS) |
| req->usb_req.status = status; |
| else |
| status = req->usb_req.status; |
| |
| if (status && status != -ESHUTDOWN) |
| dev_err(ep->udc->dev, "%s done %p, status %d\n", |
| ep->ep_usb.name, req, status); |
| |
| if (req->usb_req.complete) |
| req->usb_req.complete(&ep->ep_usb, &req->usb_req); |
| } |
| |
| static void max3420_ep_nuke(struct max3420_ep *ep, int status) |
| { |
| struct max3420_req *req, *r; |
| |
| list_for_each_entry_safe(req, r, &ep->queue, queue) { |
| list_del_init(&req->queue); |
| max3420_req_done(req, status); |
| } |
| } |
| |
| static int max3420_ep_disable(struct usb_ep *_ep) |
| { |
| struct max3420_ep *ep = to_max3420_ep(_ep); |
| |
| _ep->desc = NULL; |
| max3420_ep_nuke(ep, -ESHUTDOWN); |
| spi_max3420_enable(ep, 0); |
| |
| return 0; |
| } |
| |
| static struct usb_request * |
| max3420_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) |
| { |
| struct max3420_ep *ep = to_max3420_ep(_ep); |
| struct max3420_req *req = kzalloc(sizeof(*req), gfp_flags); |
| |
| if (!req) |
| return NULL; |
| |
| req->ep = ep; |
| INIT_LIST_HEAD(&req->queue); |
| |
| return &req->usb_req; |
| } |
| |
| static void |
| max3420_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| kfree(to_max3420_req(_req)); |
| } |
| |
| static int |
| max3420_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) |
| { |
| struct max3420_req *req = to_max3420_req(_req); |
| struct max3420_ep *ep = to_max3420_ep(_ep); |
| |
| _req->status = -EINPROGRESS; |
| _req->actual = 0; |
| list_add_tail(&req->queue, &ep->queue); |
| |
| return 0; |
| } |
| |
| static int max3420_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct max3420_req *req = to_max3420_req(_req); |
| |
| list_del_init(&req->queue); |
| max3420_req_done(req, -ECONNRESET); |
| |
| return 0; |
| } |
| |
| static int max3420_ep_set_halt(struct usb_ep *_ep, int halt) |
| { |
| struct max3420_ep *ep = to_max3420_ep(_ep); |
| struct max3420_udc *udc = ep->udc; |
| u8 epstalls; |
| |
| if (ep->id == 0) /* can't stall EP0 */ |
| return 0; |
| |
| epstalls = spi_rd8(udc, MAX3420_REG_EPSTALLS); |
| if (halt) { |
| ep->halted = 1; |
| epstalls |= BIT(ep->id + 1); |
| } else { |
| u8 clrtogs; |
| |
| ep->halted = 0; |
| epstalls &= ~BIT(ep->id + 1); |
| clrtogs = spi_rd8(udc, MAX3420_REG_CLRTOGS); |
| clrtogs |= BIT(ep->id + 1); |
| spi_wr8(udc, MAX3420_REG_CLRTOGS, clrtogs); |
| } |
| spi_wr8(udc, MAX3420_REG_EPSTALLS, epstalls | bACKSTAT); |
| |
| return 0; |
| } |
| |
| static const struct usb_ep_ops max3420_ep_ops = { |
| .enable = max3420_ep_enable, |
| .disable = max3420_ep_disable, |
| .alloc_request = max3420_ep_alloc_request, |
| .free_request = max3420_ep_free_request, |
| .queue = max3420_ep_queue, |
| .dequeue = max3420_ep_dequeue, |
| .set_halt = max3420_ep_set_halt, |
| }; |
| |
| static void __max3420_stop(struct max3420_udc *udc) |
| { |
| u8 val; |
| |
| /* Disable IRQ to CPU */ |
| spi_wr8(udc, MAX3420_REG_CPUCTL, 0); |
| |
| val = spi_rd8(udc, MAX3420_REG_USBCTL); |
| val |= bPWRDOWN; |
| val |= bHOSCSTEN; |
| spi_wr8(udc, MAX3420_REG_USBCTL, val); |
| } |
| |
| static void __max3420_start(struct max3420_udc *udc) |
| { |
| u8 val; |
| |
| /* configure SPI */ |
| spi_wr8(udc, MAX3420_REG_PINCTL, bFDUPSPI); |
| |
| /* Chip Reset */ |
| spi_wr8(udc, MAX3420_REG_USBCTL, bCHIPRES); |
| mdelay(5); |
| spi_wr8(udc, MAX3420_REG_USBCTL, 0); |
| |
| /* Poll for OSC to stabilize */ |
| while (1) { |
| val = spi_rd8(udc, MAX3420_REG_USBIRQ); |
| if (val & bOSCOKIRQ) |
| break; |
| cond_resched(); |
| } |
| |
| /* Enable PULL-UP only when Vbus detected */ |
| val = spi_rd8(udc, MAX3420_REG_USBCTL); |
| val |= bVBGATE | bCONNECT; |
| spi_wr8(udc, MAX3420_REG_USBCTL, val); |
| |
| val = bURESDNIRQ | bURESIRQ; |
| spi_wr8(udc, MAX3420_REG_USBIEN, val); |
| |
| /* Enable only EP0 interrupts */ |
| val = bIN0BAVIRQ | bOUT0DAVIRQ | bSUDAVIRQ; |
| spi_wr8(udc, MAX3420_REG_EPIEN, val); |
| |
| /* Enable IRQ to CPU */ |
| spi_wr8(udc, MAX3420_REG_CPUCTL, bIE); |
| } |
| |
| static int max3420_udc_start(struct usb_gadget *gadget, |
| struct usb_gadget_driver *driver) |
| { |
| struct max3420_udc *udc = to_udc(gadget); |
| |
| udc->driver = driver; |
| udc->remote_wkp = 0; |
| udc->softconnect = true; |
| |
| __max3420_start(udc); |
| |
| return 0; |
| } |
| |
| static int max3420_udc_stop(struct usb_gadget *gadget) |
| { |
| struct max3420_udc *udc = to_udc(gadget); |
| |
| udc->driver = NULL; |
| udc->softconnect = false; |
| |
| __max3420_stop(udc); |
| |
| return 0; |
| } |
| |
| static int max3420_wakeup(struct usb_gadget *gadget) |
| { |
| struct max3420_udc *udc = to_udc(gadget); |
| u8 usbctl; |
| |
| /* Only if wakeup allowed by host */ |
| if (!udc->remote_wkp || !udc->suspended) |
| return 0; |
| |
| /* Set Remote-Wakeup Signal*/ |
| usbctl = spi_rd8(udc, MAX3420_REG_USBCTL); |
| usbctl |= bSIGRWU; |
| spi_wr8(udc, MAX3420_REG_USBCTL, usbctl); |
| |
| mdelay(5); |
| |
| /* Clear Remote-WkUp Signal*/ |
| usbctl = spi_rd8(udc, MAX3420_REG_USBCTL); |
| usbctl &= ~bSIGRWU; |
| spi_wr8(udc, MAX3420_REG_USBCTL, usbctl); |
| |
| udc->suspended = false; |
| |
| return 0; |
| } |
| |
| static const struct usb_gadget_ops max3420_udc_ops = { |
| .udc_start = max3420_udc_start, |
| .udc_stop = max3420_udc_stop, |
| .wakeup = max3420_wakeup, |
| }; |
| |
| static struct usb_endpoint_descriptor ep0_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| .wMaxPacketSize = cpu_to_le16(EP_MAX_PACKET), |
| }; |
| |
| static void max3420_getstatus(struct max3420_udc *udc) |
| { |
| struct max3420_ep *ep; |
| u16 status = 0; |
| |
| switch (udc->setup.bRequestType & USB_RECIP_MASK) { |
| case USB_RECIP_DEVICE: |
| /* Get device status */ |
| status = 0 << USB_DEVICE_SELF_POWERED; |
| status |= (udc->remote_wkp << USB_DEVICE_REMOTE_WAKEUP); |
| break; |
| case USB_RECIP_INTERFACE: |
| if (udc->driver->setup(&udc->gadget, &udc->setup) < 0) |
| goto stall; |
| break; |
| case USB_RECIP_ENDPOINT: |
| ep = &udc->ep[udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK]; |
| if (ep->halted) |
| status = 1 << USB_ENDPOINT_HALT; |
| break; |
| default: |
| goto stall; |
| } |
| |
| status = cpu_to_le16(status); |
| spi_wr_buf(udc, MAX3420_REG_EP0FIFO, &status, 2); |
| spi_wr8_ack(udc, MAX3420_REG_EP0BC, 2, 1); |
| return; |
| stall: |
| dev_err(udc->dev, "Can't respond to getstatus request\n"); |
| spi_wr8(udc, MAX3420_REG_EPSTALLS, bSTLEP0IN | bSTLEP0OUT | bSTLSTAT); |
| } |
| |
| static void max3420_set_clear_feature(struct max3420_udc *udc) |
| { |
| int set = udc->setup.bRequest == USB_REQ_SET_FEATURE; |
| struct max3420_ep *ep; |
| int id; |
| |
| switch (udc->setup.bRequestType) { |
| case USB_RECIP_DEVICE: |
| if (udc->setup.wValue != USB_DEVICE_REMOTE_WAKEUP) |
| break; |
| |
| if (udc->setup.bRequest == USB_REQ_SET_FEATURE) |
| udc->remote_wkp = 1; |
| else |
| udc->remote_wkp = 0; |
| |
| return spi_ack_ctrl(udc); |
| |
| case USB_RECIP_ENDPOINT: |
| if (udc->setup.wValue != USB_ENDPOINT_HALT) |
| break; |
| |
| id = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK; |
| ep = &udc->ep[id]; |
| |
| max3420_ep_set_halt(&ep->ep_usb, set); |
| return; |
| default: |
| break; |
| } |
| |
| dev_err(udc->dev, "Can't respond to SET/CLEAR FEATURE\n"); |
| spi_wr8(udc, MAX3420_REG_EPSTALLS, bSTLEP0IN | bSTLEP0OUT | bSTLSTAT); |
| } |
| |
| static void max3420_handle_setup(struct max3420_udc *udc) |
| { |
| struct usb_ctrlrequest setup; |
| u8 addr; |
| |
| spi_rd_buf(udc, MAX3420_REG_SUDFIFO, (void *)&setup, 8); |
| |
| udc->setup = setup; |
| udc->setup.wValue = cpu_to_le16(setup.wValue); |
| udc->setup.wIndex = cpu_to_le16(setup.wIndex); |
| udc->setup.wLength = cpu_to_le16(setup.wLength); |
| |
| switch (udc->setup.bRequest) { |
| case USB_REQ_GET_STATUS: |
| /* Data+Status phase form udc */ |
| if ((udc->setup.bRequestType & |
| (USB_DIR_IN | USB_TYPE_MASK)) != |
| (USB_DIR_IN | USB_TYPE_STANDARD)) { |
| break; |
| } |
| return max3420_getstatus(udc); |
| case USB_REQ_SET_ADDRESS: |
| /* Status phase from udc */ |
| if (udc->setup.bRequestType != (USB_DIR_OUT | |
| USB_TYPE_STANDARD | USB_RECIP_DEVICE)) |
| break; |
| addr = spi_rd8_ack(udc, MAX3420_REG_FNADDR, 1); |
| dev_dbg(udc->dev, "Assigned Address=%d/%d\n", |
| udc->setup.wValue, addr); |
| return; |
| case USB_REQ_CLEAR_FEATURE: |
| case USB_REQ_SET_FEATURE: |
| /* Requests with no data phase, status phase from udc */ |
| if ((udc->setup.bRequestType & USB_TYPE_MASK) |
| != USB_TYPE_STANDARD) |
| break; |
| return max3420_set_clear_feature(udc); |
| default: |
| break; |
| } |
| |
| if (udc->driver->setup(&udc->gadget, &setup) < 0) { |
| /* Stall EP0 */ |
| spi_wr8(udc, MAX3420_REG_EPSTALLS, |
| bSTLEP0IN | bSTLEP0OUT | bSTLSTAT); |
| } |
| } |
| |
| static int do_data(struct max3420_udc *udc, int ep_id, int in) |
| { |
| struct max3420_ep *ep = &udc->ep[ep_id]; |
| struct max3420_req *req; |
| int done, length, psz; |
| void *buf; |
| |
| if (list_empty(&ep->queue)) |
| return 0; |
| |
| req = list_first_entry(&ep->queue, struct max3420_req, queue); |
| buf = req->usb_req.buf + req->usb_req.actual; |
| |
| psz = ep->ep_usb.maxpacket; |
| length = req->usb_req.length - req->usb_req.actual; |
| length = min(length, psz); |
| |
| if (length == 0) { |
| done = 1; |
| goto xfer_done; |
| } |
| |
| done = 0; |
| if (in) { |
| spi_wr_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length); |
| spi_wr8(udc, MAX3420_REG_EP0BC + ep_id, length); |
| if (length < psz) |
| done = 1; |
| } else { |
| psz = spi_rd8(udc, MAX3420_REG_EP0BC + ep_id); |
| length = min(length, psz); |
| spi_rd_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length); |
| if (length < ep->ep_usb.maxpacket) |
| done = 1; |
| } |
| |
| req->usb_req.actual += length; |
| |
| if (req->usb_req.actual == req->usb_req.length) |
| done = 1; |
| |
| xfer_done: |
| if (done) { |
| list_del_init(&req->queue); |
| |
| if (ep_id == 0) |
| spi_ack_ctrl(udc); |
| |
| max3420_req_done(req, 0); |
| } |
| |
| return 1; |
| } |
| |
| static int max3420_handle_irqs(struct max3420_udc *udc) |
| { |
| u8 epien, epirq, usbirq, usbien, reg[4]; |
| int ret = 0; |
| |
| spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 4); |
| epirq = reg[0]; |
| epien = reg[1]; |
| usbirq = reg[2]; |
| usbien = reg[3]; |
| |
| usbirq &= usbien; |
| epirq &= epien; |
| |
| if (epirq & bSUDAVIRQ) { |
| spi_wr8(udc, MAX3420_REG_EPIRQ, bSUDAVIRQ); |
| max3420_handle_setup(udc); |
| return 1; |
| } |
| |
| if (usbirq & bVBUSIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, bVBUSIRQ); |
| dev_dbg(udc->dev, "Cable plugged in\n"); |
| g_dnl_clear_detach(); |
| return 1; |
| } |
| |
| if (usbirq & bNOVBUSIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, bNOVBUSIRQ); |
| dev_dbg(udc->dev, "Cable pulled out\n"); |
| g_dnl_trigger_detach(); |
| return 1; |
| } |
| |
| if (usbirq & bURESIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, bURESIRQ); |
| return 1; |
| } |
| |
| if (usbirq & bURESDNIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, bURESDNIRQ); |
| spi_wr8(udc, MAX3420_REG_USBIEN, bURESDNIRQ | bURESIRQ); |
| spi_wr8(udc, MAX3420_REG_EPIEN, bSUDAVIRQ |
| | bIN0BAVIRQ | bOUT0DAVIRQ); |
| return 1; |
| } |
| |
| if (usbirq & bSUSPIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, bSUSPIRQ); |
| dev_dbg(udc->dev, "USB Suspend - Enter\n"); |
| udc->suspended = true; |
| return 1; |
| } |
| |
| if (usbirq & bBUSACTIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, bBUSACTIRQ); |
| dev_dbg(udc->dev, "USB Suspend - Exit\n"); |
| udc->suspended = false; |
| return 1; |
| } |
| |
| if (usbirq & bRWUDNIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, bRWUDNIRQ); |
| dev_dbg(udc->dev, "Asked Host to wakeup\n"); |
| return 1; |
| } |
| |
| if (usbirq & bOSCOKIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, bOSCOKIRQ); |
| dev_dbg(udc->dev, "Osc stabilized, start work\n"); |
| return 1; |
| } |
| |
| if (epirq & bOUT0DAVIRQ && do_data(udc, 0, 0)) { |
| spi_wr8_ack(udc, MAX3420_REG_EPIRQ, bOUT0DAVIRQ, 1); |
| ret = 1; |
| } |
| |
| if (epirq & bIN0BAVIRQ && do_data(udc, 0, 1)) |
| ret = 1; |
| |
| if (epirq & bOUT1DAVIRQ && do_data(udc, 1, 0)) { |
| spi_wr8_ack(udc, MAX3420_REG_EPIRQ, bOUT1DAVIRQ, 1); |
| ret = 1; |
| } |
| |
| if (epirq & bIN2BAVIRQ && do_data(udc, 2, 1)) |
| ret = 1; |
| |
| if (epirq & bIN3BAVIRQ && do_data(udc, 3, 1)) |
| ret = 1; |
| |
| return ret; |
| } |
| |
| static int max3420_irq(struct max3420_udc *udc) |
| { |
| do_data(udc, 0, 1); /* get done with the EP0 ZLP */ |
| |
| return max3420_handle_irqs(udc); |
| } |
| |
| static void max3420_setup_eps(struct max3420_udc *udc) |
| { |
| int i; |
| |
| INIT_LIST_HEAD(&udc->gadget.ep_list); |
| INIT_LIST_HEAD(&udc->ep[0].ep_usb.ep_list); |
| |
| for (i = 0; i < MAX3420_MAX_EPS; i++) { |
| struct max3420_ep *ep = &udc->ep[i]; |
| |
| INIT_LIST_HEAD(&ep->queue); |
| |
| ep->id = i; |
| ep->udc = udc; |
| ep->ep_usb.ops = &max3420_ep_ops; |
| ep->ep_usb.name = ep->name; |
| ep->ep_usb.maxpacket = EP_MAX_PACKET; |
| |
| if (i == 0) { |
| ep->ep_usb.desc = &ep0_desc; |
| snprintf(ep->name, EPNAME_SIZE, "ep0"); |
| continue; |
| } |
| |
| list_add_tail(&ep->ep_usb.ep_list, &udc->gadget.ep_list); |
| |
| if (i == 1) |
| snprintf(ep->name, EPNAME_SIZE, "ep1out-bulk"); |
| else |
| snprintf(ep->name, EPNAME_SIZE, "ep%din-bulk", i); |
| }; |
| } |
| |
| static void max3420_setup_spi(struct max3420_udc *udc) |
| { |
| u8 reg[8]; |
| |
| spi_claim_bus(udc->slave); |
| spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 8); |
| /* configure SPI */ |
| spi_wr8(udc, MAX3420_REG_PINCTL, bFDUPSPI); |
| } |
| |
| int dm_usb_gadget_handle_interrupts(struct udevice *dev) |
| { |
| struct max3420_udc *udc = dev_get_priv(dev); |
| |
| return max3420_irq(udc); |
| } |
| |
| static int max3420_udc_probe(struct udevice *dev) |
| { |
| struct max3420_udc *udc = dev_get_priv(dev); |
| struct dm_spi_slave_plat *slave_pdata; |
| struct udevice *bus = dev->parent; |
| int busnum = dev_seq(bus); |
| unsigned int cs; |
| uint speed, mode; |
| struct udevice *spid; |
| |
| slave_pdata = dev_get_parent_plat(dev); |
| cs = slave_pdata->cs; |
| speed = slave_pdata->max_hz; |
| mode = slave_pdata->mode; |
| spi_get_bus_and_cs(busnum, cs, speed, mode, "spi_generic_drv", |
| NULL, &spid, &udc->slave); |
| |
| udc->dev = dev; |
| udc->gadget.ep0 = &udc->ep[0].ep_usb; |
| udc->gadget.max_speed = USB_SPEED_FULL; |
| udc->gadget.speed = USB_SPEED_FULL; |
| udc->gadget.is_dualspeed = 0; |
| udc->gadget.ops = &max3420_udc_ops; |
| udc->gadget.name = "max3420-udc"; |
| |
| max3420_setup_eps(udc); |
| max3420_setup_spi(udc); |
| |
| usb_add_gadget_udc((struct device *)dev, &udc->gadget); |
| |
| return 0; |
| } |
| |
| static int max3420_udc_remove(struct udevice *dev) |
| { |
| struct max3420_udc *udc = dev_get_priv(dev); |
| |
| usb_del_gadget_udc(&udc->gadget); |
| |
| spi_release_bus(udc->slave); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id max3420_ids[] = { |
| { .compatible = "maxim,max3421-udc" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(max3420_generic_udc) = { |
| .name = "max3420-udc", |
| .id = UCLASS_USB_GADGET_GENERIC, |
| .of_match = max3420_ids, |
| .probe = max3420_udc_probe, |
| .remove = max3420_udc_remove, |
| .priv_auto = sizeof(struct max3420_udc), |
| }; |