| # |
| # MUSB Controller Driver |
| # |
| comment "MUSB Controller Driver" |
| |
| config USB_MUSB_HOST |
| bool "MUSB host mode support" |
| select SPL_SPRINTF if SPL |
| select TPL_SPRINTF if TPL |
| help |
| Enables the MUSB USB dual-role controller in host mode. |
| |
| config USB_MUSB_GADGET |
| bool "MUSB gadget mode support" |
| select USB_GADGET_DUALSPEED |
| select SPL_SPRINTF if SPL |
| select TPL_SPRINTF if TPL |
| help |
| Enables the MUSB USB dual-role controller in gadget mode. |
| |
| config USB_MUSB_DA8XX |
| bool "Enable DA8xx MUSB Controller" |
| depends on DM_USB |
| help |
| Say y here to enable support for the dual role high |
| speed USB controller based on the Mentor Graphics |
| silicon IP. |
| |
| config USB_MUSB_TI |
| bool "Enable TI OTG USB controller" |
| depends on DM_USB |
| select USB_MUSB_DSPS |
| default n |
| help |
| Say y here to enable support for the dual role high |
| speed USB controller based on the Mentor Graphics |
| silicon IP. |
| |
| config USB_MUSB_OMAP2PLUS |
| tristate "OMAP2430 and onwards" |
| depends on ARCH_OMAP2PLUS |
| |
| config USB_MUSB_AM35X |
| bool "AM35x" |
| |
| config USB_MUSB_DSPS |
| bool "TI DSPS platforms" |
| |
| if USB_MUSB_HOST || USB_MUSB_GADGET |
| config USB_MUSB_MT85XX |
| bool "Enable Mediatek MT85XX DRC USB controller" |
| depends on DM_USB && ARCH_MEDIATEK |
| default n |
| help |
| Say y to enable Mediatek MT85XX USB DRC controller support |
| if it is available on your Mediatek MUSB IP based platform. |
| DMA controllers are ignored. This driver follow musb-new |
| driver and usb gadget framework. |
| |
| config USB_MUSB_PIC32 |
| bool "Enable Microchip PIC32 DRC USB controller" |
| depends on DM_USB && MACH_PIC32 |
| help |
| Say y to enable PIC32 USB DRC controller support |
| if it is available on your Microchip PIC32 platform. |
| |
| config USB_MUSB_SUNXI |
| bool "Enable sunxi OTG / DRC USB controller" |
| depends on ARCH_SUNXI |
| default y |
| ---help--- |
| Say y here to enable support for the sunxi OTG / DRC USB controller |
| used on almost all sunxi boards. |
| |
| config USB_MUSB_DISABLE_BULK_COMBINE_SPLIT |
| bool "Disable MUSB bulk split/combine" |
| default y |
| help |
| On TI AM335x devices, MUSB has bulk split/combine feature enabled |
| in the ConfigData register, but the current MUSB driver does not |
| support it yet. Select this option to disable the feature until the |
| driver adds the support. |
| |
| endif |
| |
| config USB_MUSB_PIO_ONLY |
| bool "Disable DMA (always use PIO)" |
| default y if USB_MUSB_AM35X || USB_MUSB_PIC32 || USB_MUSB_OMAP2PLUS || USB_MUSB_DSPS || USB_MUSB_SUNXI || USB_MUSB_MT85XX |
| help |
| All data is copied between memory and FIFO by the CPU. |
| DMA controllers are ignored. |
| |
| config USB_MUSB_FIXED_CONFIGDATA |
| bool "Hardcode MUSB CONFIGDATA register" |
| depends on USB_MUSB_SUNXI |
| default n if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I_A23 |
| default y |
| help |
| Newer Allwinner SoCs do not implement the MUSB_CONFIGDATA register, |
| so it always reads 0. Select this option to override this and |
| return a hardcoded value instead. |