| /* |
| * Copyright 2006 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * Version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| |
| #ifdef CONFIG_FSL_I2C |
| #ifdef CONFIG_HARD_I2C |
| |
| #include <command.h> |
| #include <i2c.h> /* Functional interface */ |
| |
| #include <asm/io.h> |
| #include <asm/fsl_i2c.h> /* HW definitions */ |
| |
| #define I2C_TIMEOUT (CFG_HZ / 4) |
| |
| #define I2C_READ_BIT 1 |
| #define I2C_WRITE_BIT 0 |
| |
| /* Initialize the bus pointer to whatever one the SPD EEPROM is on. |
| * Default is bus 0. This is necessary because the DDR initialization |
| * runs from ROM, and we can't switch buses because we can't modify |
| * the global variables. |
| */ |
| #ifdef CFG_SPD_BUS_NUM |
| static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM; |
| #else |
| static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0; |
| #endif |
| |
| static volatile struct fsl_i2c *i2c_dev[2] = { |
| (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET), |
| #ifdef CFG_I2C2_OFFSET |
| (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET) |
| #endif |
| }; |
| |
| void |
| i2c_init(int speed, int slaveadd) |
| { |
| volatile struct fsl_i2c *dev; |
| |
| dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET); |
| |
| writeb(0, &dev->cr); /* stop I2C controller */ |
| udelay(5); /* let it shutdown in peace */ |
| writeb(0x3F, &dev->fdr); /* set bus speed */ |
| writeb(0x3F, &dev->dfsrr); /* set default filter */ |
| writeb(slaveadd << 1, &dev->adr); /* write slave address */ |
| writeb(0x0, &dev->sr); /* clear status register */ |
| writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ |
| |
| #ifdef CFG_I2C2_OFFSET |
| dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET); |
| |
| writeb(0, &dev->cr); /* stop I2C controller */ |
| udelay(5); /* let it shutdown in peace */ |
| writeb(0x3F, &dev->fdr); /* set bus speed */ |
| writeb(0x3F, &dev->dfsrr); /* set default filter */ |
| writeb(slaveadd << 1, &dev->adr); /* write slave address */ |
| writeb(0x0, &dev->sr); /* clear status register */ |
| writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ |
| #endif /* CFG_I2C2_OFFSET */ |
| } |
| |
| static __inline__ int |
| i2c_wait4bus(void) |
| { |
| ulong timeval = get_timer(0); |
| |
| while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) { |
| if (get_timer(timeval) > I2C_TIMEOUT) { |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static __inline__ int |
| i2c_wait(int write) |
| { |
| u32 csr; |
| ulong timeval = get_timer(0); |
| |
| do { |
| csr = readb(&i2c_dev[i2c_bus_num]->sr); |
| if (!(csr & I2C_SR_MIF)) |
| continue; |
| |
| writeb(0x0, &i2c_dev[i2c_bus_num]->sr); |
| |
| if (csr & I2C_SR_MAL) { |
| debug("i2c_wait: MAL\n"); |
| return -1; |
| } |
| |
| if (!(csr & I2C_SR_MCF)) { |
| debug("i2c_wait: unfinished\n"); |
| return -1; |
| } |
| |
| if (write == I2C_WRITE_BIT && (csr & I2C_SR_RXAK)) { |
| debug("i2c_wait: No RXACK\n"); |
| return -1; |
| } |
| |
| return 0; |
| } while (get_timer (timeval) < I2C_TIMEOUT); |
| |
| debug("i2c_wait: timed out\n"); |
| return -1; |
| } |
| |
| static __inline__ int |
| i2c_write_addr (u8 dev, u8 dir, int rsta) |
| { |
| writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX |
| | (rsta ? I2C_CR_RSTA : 0), |
| &i2c_dev[i2c_bus_num]->cr); |
| |
| writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr); |
| |
| if (i2c_wait(I2C_WRITE_BIT) < 0) |
| return 0; |
| |
| return 1; |
| } |
| |
| static __inline__ int |
| __i2c_write(u8 *data, int length) |
| { |
| int i; |
| |
| writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, |
| &i2c_dev[i2c_bus_num]->cr); |
| |
| for (i = 0; i < length; i++) { |
| writeb(data[i], &i2c_dev[i2c_bus_num]->dr); |
| |
| if (i2c_wait(I2C_WRITE_BIT) < 0) |
| break; |
| } |
| |
| return i; |
| } |
| |
| static __inline__ int |
| __i2c_read(u8 *data, int length) |
| { |
| int i; |
| |
| writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0), |
| &i2c_dev[i2c_bus_num]->cr); |
| |
| /* dummy read */ |
| readb(&i2c_dev[i2c_bus_num]->dr); |
| |
| for (i = 0; i < length; i++) { |
| if (i2c_wait(I2C_READ_BIT) < 0) |
| break; |
| |
| /* Generate ack on last next to last byte */ |
| if (i == length - 2) |
| writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK, |
| &i2c_dev[i2c_bus_num]->cr); |
| |
| /* Generate stop on last byte */ |
| if (i == length - 1) |
| writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr); |
| |
| data[i] = readb(&i2c_dev[i2c_bus_num]->dr); |
| } |
| |
| return i; |
| } |
| |
| int |
| i2c_read(u8 dev, uint addr, int alen, u8 *data, int length) |
| { |
| int i = -1; /* signal error */ |
| u8 *a = (u8*)&addr; |
| |
| if (i2c_wait4bus() >= 0 |
| && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0 |
| && __i2c_write(&a[4 - alen], alen) == alen) |
| i = 0; /* No error so far */ |
| |
| if (length |
| && i2c_write_addr(dev, I2C_READ_BIT, 1) != 0) |
| i = __i2c_read(data, length); |
| |
| writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); |
| |
| if (i == length) |
| return 0; |
| |
| return -1; |
| } |
| |
| int |
| i2c_write(u8 dev, uint addr, int alen, u8 *data, int length) |
| { |
| int i = -1; /* signal error */ |
| u8 *a = (u8*)&addr; |
| |
| if (i2c_wait4bus() >= 0 |
| && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0 |
| && __i2c_write(&a[4 - alen], alen) == alen) { |
| i = __i2c_write(data, length); |
| } |
| |
| writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); |
| |
| if (i == length) |
| return 0; |
| |
| return -1; |
| } |
| |
| int |
| i2c_probe(uchar chip) |
| { |
| /* For unknow reason the controller will ACK when |
| * probing for a slave with the same address, so skip |
| * it. |
| */ |
| if (chip == (readb(&i2c_dev[i2c_bus_num]->adr) >> 1)) |
| return -1; |
| |
| return i2c_read(chip, 0, 0, NULL, 0); |
| } |
| |
| uchar |
| i2c_reg_read(uchar i2c_addr, uchar reg) |
| { |
| uchar buf[1]; |
| |
| i2c_read(i2c_addr, reg, 1, buf, 1); |
| |
| return buf[0]; |
| } |
| |
| void |
| i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) |
| { |
| i2c_write(i2c_addr, reg, 1, &val, 1); |
| } |
| |
| int i2c_set_bus_num(unsigned int bus) |
| { |
| #ifdef CFG_I2C2_OFFSET |
| if (bus > 1) { |
| #else |
| if (bus > 0) { |
| #endif |
| return -1; |
| } |
| |
| i2c_bus_num = bus; |
| |
| return 0; |
| } |
| |
| int i2c_set_bus_speed(unsigned int speed) |
| { |
| return -1; |
| } |
| |
| unsigned int i2c_get_bus_num(void) |
| { |
| return i2c_bus_num; |
| } |
| |
| unsigned int i2c_get_bus_speed(void) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_HARD_I2C */ |
| #endif /* CONFIG_FSL_I2C */ |