| /* |
| * Copyright 2006 Freescale Semiconductor |
| * Jeff Brown |
| * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <watchdog.h> |
| #include <command.h> |
| #include <asm/cache.h> |
| #include <mpc86xx.h> |
| |
| #if defined(CONFIG_OF_FLAT_TREE) |
| #include <ft_build.h> |
| #endif |
| |
| int |
| checkcpu(void) |
| { |
| sys_info_t sysinfo; |
| uint pvr, svr; |
| uint ver; |
| uint major, minor; |
| uint lcrr; /* local bus clock ratio register */ |
| uint clkdiv; /* clock divider portion of lcrr */ |
| |
| puts("Freescale PowerPC\n"); |
| |
| pvr = get_pvr(); |
| ver = PVR_VER(pvr); |
| major = PVR_MAJ(pvr); |
| minor = PVR_MIN(pvr); |
| |
| puts("CPU:\n"); |
| puts(" Core: "); |
| |
| switch (ver) { |
| case PVR_VER(PVR_86xx): |
| puts("E600"); |
| break; |
| default: |
| puts("Unknown"); |
| break; |
| } |
| printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr); |
| |
| svr = get_svr(); |
| ver = SVR_VER(svr); |
| major = SVR_MAJ(svr); |
| minor = SVR_MIN(svr); |
| |
| puts(" System: "); |
| switch (ver) { |
| case SVR_8641: |
| if (SVR_SUBVER(svr) == 1) { |
| puts("8641D"); |
| } else { |
| puts("8641"); |
| } |
| break; |
| default: |
| puts("Unknown"); |
| break; |
| } |
| printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr); |
| |
| get_sys_info(&sysinfo); |
| |
| puts(" Clocks: "); |
| printf("CPU:%4lu MHz, ", sysinfo.freqProcessor / 1000000); |
| printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000); |
| printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000); |
| |
| #if defined(CFG_LBC_LCRR) |
| lcrr = CFG_LBC_LCRR; |
| #else |
| { |
| volatile immap_t *immap = (immap_t *) CFG_IMMR; |
| volatile ccsr_lbc_t *lbc = &immap->im_lbc; |
| |
| lcrr = lbc->lcrr; |
| } |
| #endif |
| clkdiv = lcrr & 0x0f; |
| if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { |
| printf("LBC:%4lu MHz\n", |
| sysinfo.freqSystemBus / 1000000 / clkdiv); |
| } else { |
| printf(" LBC: unknown (lcrr: 0x%08x)\n", lcrr); |
| } |
| |
| puts(" L2: "); |
| if (get_l2cr() & 0x80000000) |
| puts("Enabled\n"); |
| else |
| puts("Disabled\n"); |
| |
| return 0; |
| } |
| |
| |
| static inline void |
| soft_restart(unsigned long addr) |
| { |
| #if !defined(CONFIG_MPC8641HPCN) && !defined(CONFIG_MPC8610HPCD) |
| |
| /* |
| * SRR0 has system reset vector, SRR1 has default MSR value |
| * rfi restores MSR from SRR1 and sets the PC to the SRR0 value |
| */ |
| |
| __asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr)); |
| __asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4"); |
| __asm__ __volatile__ ("mtspr 27, 4"); |
| __asm__ __volatile__ ("rfi"); |
| |
| #else /* CONFIG_MPC8641HPCN */ |
| |
| out8(PIXIS_BASE + PIXIS_RST, 0); |
| |
| #endif /* !CONFIG_MPC8641HPCN */ |
| |
| while (1) ; /* not reached */ |
| } |
| |
| |
| /* |
| * No generic way to do board reset. Simply call soft_reset. |
| */ |
| void |
| do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| #if !defined(CONFIG_MPC8641HPCN) && !defined(CONFIG_MPC8610HPCD) |
| |
| #ifdef CFG_RESET_ADDRESS |
| ulong addr = CFG_RESET_ADDRESS; |
| #else |
| /* |
| * note: when CFG_MONITOR_BASE points to a RAM address, |
| * CFG_MONITOR_BASE - sizeof (ulong) is usually a valid |
| * address. Better pick an address known to be invalid on your |
| * system and assign it to CFG_RESET_ADDRESS. |
| */ |
| ulong addr = CFG_MONITOR_BASE - sizeof(ulong); |
| #endif |
| |
| /* flush and disable I/D cache */ |
| __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3"); |
| __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5"); |
| __asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4"); |
| __asm__ __volatile__ ("andc 5, 3, 5" ::: "r5"); |
| __asm__ __volatile__ ("sync"); |
| __asm__ __volatile__ ("mtspr 1008, 4"); |
| __asm__ __volatile__ ("isync"); |
| __asm__ __volatile__ ("sync"); |
| __asm__ __volatile__ ("mtspr 1008, 5"); |
| __asm__ __volatile__ ("isync"); |
| __asm__ __volatile__ ("sync"); |
| |
| soft_restart(addr); |
| |
| #else /* CONFIG_MPC8641HPCN */ |
| |
| out8(PIXIS_BASE + PIXIS_RST, 0); |
| |
| #endif /* !CONFIG_MPC8641HPCN */ |
| |
| while (1) ; /* not reached */ |
| } |
| |
| |
| /* |
| * Get timebase clock frequency |
| */ |
| unsigned long |
| get_tbclk(void) |
| { |
| sys_info_t sys_info; |
| |
| get_sys_info(&sys_info); |
| return (sys_info.freqSystemBus + 3L) / 4L; |
| } |
| |
| |
| #if defined(CONFIG_WATCHDOG) |
| void |
| watchdog_reset(void) |
| { |
| } |
| #endif /* CONFIG_WATCHDOG */ |
| |
| |
| #if defined(CONFIG_DDR_ECC) |
| void |
| dma_init(void) |
| { |
| volatile immap_t *immap = (immap_t *) CFG_IMMR; |
| volatile ccsr_dma_t *dma = &immap->im_dma; |
| |
| dma->satr0 = 0x00040000; |
| dma->datr0 = 0x00040000; |
| asm("sync; isync"); |
| } |
| |
| uint |
| dma_check(void) |
| { |
| volatile immap_t *immap = (immap_t *) CFG_IMMR; |
| volatile ccsr_dma_t *dma = &immap->im_dma; |
| volatile uint status = dma->sr0; |
| |
| /* While the channel is busy, spin */ |
| while ((status & 4) == 4) { |
| status = dma->sr0; |
| } |
| |
| if (status != 0) { |
| printf("DMA Error: status = %x\n", status); |
| } |
| return status; |
| } |
| |
| int |
| dma_xfer(void *dest, uint count, void *src) |
| { |
| volatile immap_t *immap = (immap_t *) CFG_IMMR; |
| volatile ccsr_dma_t *dma = &immap->im_dma; |
| |
| dma->dar0 = (uint) dest; |
| dma->sar0 = (uint) src; |
| dma->bcr0 = count; |
| dma->mr0 = 0xf000004; |
| asm("sync;isync"); |
| dma->mr0 = 0xf000005; |
| asm("sync;isync"); |
| return dma_check(); |
| } |
| |
| #endif /* CONFIG_DDR_ECC */ |
| |
| |
| #ifdef CONFIG_OF_FLAT_TREE |
| void |
| ft_cpu_setup(void *blob, bd_t *bd) |
| { |
| u32 *p; |
| ulong clock; |
| int len; |
| |
| clock = bd->bi_busfreq; |
| p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); |
| if (p != NULL) |
| *p = cpu_to_be32(clock); |
| |
| p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len); |
| if (p != NULL) |
| *p = cpu_to_be32(clock); |
| |
| p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len); |
| if (p != NULL) |
| *p = cpu_to_be32(clock); |
| |
| #if defined(CONFIG_TSEC1) |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); |
| if (p != NULL) |
| memcpy(p, bd->bi_enetaddr, 6); |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len); |
| if (p) |
| memcpy(p, bd->bi_enetaddr, 6); |
| #endif |
| |
| #if defined(CONFIG_TSEC2) |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len); |
| if (p != NULL) |
| memcpy(p, bd->bi_enet1addr, 6); |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len); |
| if (p != NULL) |
| memcpy(p, bd->bi_enet1addr, 6); |
| #endif |
| |
| #if defined(CONFIG_TSEC3) |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len); |
| if (p != NULL) |
| memcpy(p, bd->bi_enet2addr, 6); |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len); |
| if (p != NULL) |
| memcpy(p, bd->bi_enet2addr, 6); |
| #endif |
| |
| #if defined(CONFIG_TSEC4) |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len); |
| if (p != NULL) |
| memcpy(p, bd->bi_enet3addr, 6); |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len); |
| if (p != NULL) |
| memcpy(p, bd->bi_enet3addr, 6); |
| #endif |
| |
| } |
| #endif |