| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2015 - 2019 MediaTek Inc. |
| * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> |
| * Ryder Lee <ryder.lee@mediatek.com> |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <generic-phy.h> |
| #include <malloc.h> |
| #include <mapmem.h> |
| #include <asm/io.h> |
| #include <dm/device_compat.h> |
| #include <dm/devres.h> |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| |
| #include <dt-bindings/phy/phy.h> |
| |
| /* version V1 sub-banks offset base address */ |
| /* banks shared by multiple phys */ |
| #define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */ |
| #define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */ |
| #define SSUSB_SIFSLV_V1_CHIP 0x300 /* shared by u3 phys */ |
| /* u2 phy bank */ |
| #define SSUSB_SIFSLV_V1_U2PHY_COM 0x000 |
| /* u3/pcie/sata phy banks */ |
| #define SSUSB_SIFSLV_V1_U3PHYD 0x000 |
| #define SSUSB_SIFSLV_V1_U3PHYA 0x200 |
| |
| /* version V2 sub-banks offset base address */ |
| /* u2 phy banks */ |
| #define SSUSB_SIFSLV_V2_MISC 0x000 |
| #define SSUSB_SIFSLV_V2_U2FREQ 0x100 |
| #define SSUSB_SIFSLV_V2_U2PHY_COM 0x300 |
| /* u3/pcie/sata phy banks */ |
| #define SSUSB_SIFSLV_V2_SPLLC 0x000 |
| #define SSUSB_SIFSLV_V2_CHIP 0x100 |
| #define SSUSB_SIFSLV_V2_U3PHYD 0x200 |
| #define SSUSB_SIFSLV_V2_U3PHYA 0x400 |
| |
| #define U3P_USBPHYACR0 0x000 |
| #define PA0_RG_U2PLL_FORCE_ON BIT(15) |
| #define PA0_USB20_PLL_PREDIV GENMASK(7, 6) |
| #define PA0_RG_USB20_INTR_EN BIT(5) |
| |
| #define U3P_USBPHYACR2 0x008 |
| #define PA2_RG_U2PLL_BW GENMASK(21, 19) |
| |
| #define U3P_USBPHYACR5 0x014 |
| #define PA5_RG_U2_HSTX_SRCAL_EN BIT(15) |
| #define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12) |
| #define PA5_RG_U2_HS_100U_U3_EN BIT(11) |
| |
| #define U3P_USBPHYACR6 0x018 |
| #define PA6_RG_U2_BC11_SW_EN BIT(23) |
| #define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20) |
| #define PA6_RG_U2_SQTH GENMASK(3, 0) |
| |
| #define U3P_U2PHYACR4 0x020 |
| #define P2C_RG_USB20_GPIO_CTL BIT(9) |
| #define P2C_USB20_GPIO_MODE BIT(8) |
| #define P2C_U2_GPIO_CTR_MSK \ |
| (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE) |
| |
| #define U3P_U2PHYA_RESV 0x030 |
| #define P2R_RG_U2PLL_FBDIV_26M 0x1bb13b |
| #define P2R_RG_U2PLL_FBDIV_48M 0x3c0000 |
| |
| #define U3P_U2PHYA_RESV1 0x044 |
| #define P2R_RG_U2PLL_REFCLK_SEL BIT(5) |
| #define P2R_RG_U2PLL_FRA_EN BIT(3) |
| |
| #define U3P_U2PHYDTM0 0x068 |
| #define P2C_FORCE_UART_EN BIT(26) |
| #define P2C_FORCE_DATAIN BIT(23) |
| #define P2C_FORCE_DM_PULLDOWN BIT(21) |
| #define P2C_FORCE_DP_PULLDOWN BIT(20) |
| #define P2C_FORCE_XCVRSEL BIT(19) |
| #define P2C_FORCE_SUSPENDM BIT(18) |
| #define P2C_FORCE_TERMSEL BIT(17) |
| #define P2C_RG_DATAIN GENMASK(13, 10) |
| #define P2C_RG_DMPULLDOWN BIT(7) |
| #define P2C_RG_DPPULLDOWN BIT(6) |
| #define P2C_RG_XCVRSEL GENMASK(5, 4) |
| #define P2C_RG_SUSPENDM BIT(3) |
| #define P2C_RG_TERMSEL BIT(2) |
| #define P2C_DTM0_PART_MASK \ |
| (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \ |
| P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \ |
| P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \ |
| P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL) |
| |
| #define U3P_U2PHYDTM1 0x06C |
| #define P2C_RG_UART_EN BIT(16) |
| #define P2C_FORCE_IDDIG BIT(9) |
| #define P2C_RG_VBUSVALID BIT(5) |
| #define P2C_RG_SESSEND BIT(4) |
| #define P2C_RG_AVALID BIT(2) |
| #define P2C_RG_IDDIG BIT(1) |
| |
| #define U3P_U3_CHIP_GPIO_CTLD 0x0c |
| #define P3C_REG_IP_SW_RST BIT(31) |
| #define P3C_MCU_BUS_CK_GATE_EN BIT(30) |
| #define P3C_FORCE_IP_SW_RST BIT(29) |
| |
| #define U3P_U3_CHIP_GPIO_CTLE 0x10 |
| #define P3C_RG_SWRST_U3_PHYD BIT(25) |
| #define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24) |
| |
| #define U3P_U3_PHYA_REG0 0x000 |
| #define P3A_RG_CLKDRV_OFF GENMASK(3, 2) |
| |
| #define U3P_U3_PHYA_REG1 0x004 |
| #define P3A_RG_CLKDRV_AMP GENMASK(31, 29) |
| |
| #define U3P_U3_PHYA_REG6 0x018 |
| #define P3A_RG_TX_EIDLE_CM GENMASK(31, 28) |
| |
| #define U3P_U3_PHYA_REG9 0x024 |
| #define P3A_RG_RX_DAC_MUX GENMASK(5, 1) |
| |
| #define U3P_U3_PHYA_DA_REG0 0x100 |
| #define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16) |
| #define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12) |
| #define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10) |
| |
| #define U3P_U3_PHYA_DA_REG4 0x108 |
| #define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19) |
| #define P3A_RG_PLL_BC_PE2H GENMASK(7, 6) |
| |
| #define U3P_U3_PHYA_DA_REG5 0x10c |
| #define P3A_RG_PLL_BR_PE2H GENMASK(29, 28) |
| #define P3A_RG_PLL_IC_PE2H GENMASK(15, 12) |
| |
| #define U3P_U3_PHYA_DA_REG6 0x110 |
| #define P3A_RG_PLL_IR_PE2H GENMASK(19, 16) |
| |
| #define U3P_U3_PHYA_DA_REG7 0x114 |
| #define P3A_RG_PLL_BP_PE2H GENMASK(19, 16) |
| |
| #define U3P_U3_PHYA_DA_REG20 0x13c |
| #define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16) |
| |
| #define U3P_U3_PHYA_DA_REG25 0x148 |
| #define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0) |
| |
| #define U3P_U3_PHYD_LFPS1 0x00c |
| #define P3D_RG_FWAKE_TH GENMASK(21, 16) |
| |
| #define U3P_U3_PHYD_CDR1 0x05c |
| #define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24) |
| #define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8) |
| |
| #define U3P_U3_PHYD_RXDET1 0x128 |
| #define P3D_RG_RXDET_STB2_SET GENMASK(17, 9) |
| |
| #define U3P_U3_PHYD_RXDET2 0x12c |
| #define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0) |
| |
| #define U3P_SPLLC_XTALCTL3 0x018 |
| #define XC3_RG_U3_XTAL_RX_PWD BIT(9) |
| #define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8) |
| |
| /* SATA register setting */ |
| #define PHYD_CTRL_SIGNAL_MODE4 0x1c |
| /* CDR Charge Pump P-path current adjustment */ |
| #define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20) |
| #define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8) |
| |
| #define PHYD_DESIGN_OPTION2 0x24 |
| /* Symbol lock count selection */ |
| #define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4) |
| |
| #define PHYD_DESIGN_OPTION9 0x40 |
| /* COMWAK GAP width window */ |
| #define RG_TG_MAX_MSK GENMASK(20, 16) |
| /* COMINIT GAP width window */ |
| #define RG_T2_MAX_MSK GENMASK(13, 8) |
| /* COMWAK GAP width window */ |
| #define RG_TG_MIN_MSK GENMASK(7, 5) |
| /* COMINIT GAP width window */ |
| #define RG_T2_MIN_MSK GENMASK(4, 0) |
| |
| #define ANA_RG_CTRL_SIGNAL1 0x4c |
| /* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */ |
| #define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8) |
| |
| #define ANA_RG_CTRL_SIGNAL4 0x58 |
| #define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20) |
| /* Loop filter R1 resistance adjustment for Gen1 speed */ |
| #define RG_CDR_BR_GEN2_MSK GENMASK(10, 8) |
| |
| #define ANA_RG_CTRL_SIGNAL6 0x60 |
| /* I-path capacitance adjustment for Gen1 */ |
| #define RG_CDR_BC_GEN1_MSK GENMASK(28, 24) |
| #define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0) |
| |
| #define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c |
| /* RX Gen1 LEQ tuning step */ |
| #define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8) |
| |
| #define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8 |
| #define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16) |
| |
| #define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc |
| #define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0) |
| |
| enum mtk_phy_version { |
| MTK_TPHY_V1 = 1, |
| MTK_TPHY_V2, |
| }; |
| |
| struct tphy_pdata { |
| enum mtk_phy_version version; |
| |
| /* |
| * workaround only for mt8195: |
| * u2phy should use integer mode instead of fractional mode of |
| * 48M PLL, fix it by switching PLL to 26M from default 48M |
| */ |
| bool sw_pll_48m_to_26m; |
| }; |
| |
| struct u2phy_banks { |
| void __iomem *misc; |
| void __iomem *fmreg; |
| void __iomem *com; |
| }; |
| |
| struct u3phy_banks { |
| void __iomem *spllc; |
| void __iomem *chip; |
| void __iomem *phyd; /* include u3phyd_bank2 */ |
| void __iomem *phya; /* include u3phya_da */ |
| }; |
| |
| struct mtk_phy_instance { |
| void __iomem *port_base; |
| const struct device_node *np; |
| union { |
| struct u2phy_banks u2_banks; |
| struct u3phy_banks u3_banks; |
| }; |
| |
| struct clk ref_clk; /* reference clock of (digital) phy */ |
| struct clk da_ref_clk; /* reference clock of analog phy */ |
| u32 index; |
| u32 type; |
| }; |
| |
| struct mtk_tphy { |
| struct udevice *dev; |
| void __iomem *sif_base; |
| const struct tphy_pdata *pdata; |
| struct mtk_phy_instance **phys; |
| int nphys; |
| }; |
| |
| /* workaround only for mt8195 */ |
| static void u2_phy_pll_26m_set(struct mtk_tphy *tphy, |
| struct mtk_phy_instance *instance) |
| { |
| struct u2phy_banks *u2_banks = &instance->u2_banks; |
| |
| if (!tphy->pdata->sw_pll_48m_to_26m) |
| return; |
| |
| clrsetbits_le32(u2_banks->com + U3P_USBPHYACR0, PA0_USB20_PLL_PREDIV, |
| FIELD_PREP(PA0_USB20_PLL_PREDIV, 0)); |
| |
| clrsetbits_le32(u2_banks->com + U3P_USBPHYACR2, PA2_RG_U2PLL_BW, |
| FIELD_PREP(PA2_RG_U2PLL_BW, 3)); |
| |
| writel(P2R_RG_U2PLL_FBDIV_26M, u2_banks->com + U3P_U2PHYA_RESV); |
| |
| setbits_le32(u2_banks->com + U3P_U2PHYA_RESV1, |
| P2R_RG_U2PLL_FRA_EN | P2R_RG_U2PLL_REFCLK_SEL); |
| } |
| |
| static void u2_phy_instance_init(struct mtk_tphy *tphy, |
| struct mtk_phy_instance *instance) |
| { |
| struct u2phy_banks *u2_banks = &instance->u2_banks; |
| |
| /* switch to USB function, and enable usb pll */ |
| clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM0, |
| P2C_FORCE_UART_EN | P2C_FORCE_SUSPENDM, |
| FIELD_PREP(P2C_RG_XCVRSEL, 1) | |
| FIELD_PREP(P2C_RG_DATAIN, 0)); |
| |
| clrbits_le32(u2_banks->com + U3P_U2PHYDTM1, P2C_RG_UART_EN); |
| setbits_le32(u2_banks->com + U3P_USBPHYACR0, PA0_RG_USB20_INTR_EN); |
| |
| /* disable switch 100uA current to SSUSB */ |
| clrbits_le32(u2_banks->com + U3P_USBPHYACR5, PA5_RG_U2_HS_100U_U3_EN); |
| |
| clrbits_le32(u2_banks->com + U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK); |
| |
| /* DP/DM BC1.1 path Disable */ |
| clrsetbits_le32(u2_banks->com + U3P_USBPHYACR6, |
| PA6_RG_U2_BC11_SW_EN | PA6_RG_U2_SQTH, |
| FIELD_PREP(PA6_RG_U2_SQTH, 2)); |
| |
| /* set HS slew rate */ |
| clrsetbits_le32(u2_banks->com + U3P_USBPHYACR5, |
| PA5_RG_U2_HSTX_SRCTRL, |
| FIELD_PREP(PA5_RG_U2_HSTX_SRCTRL, 4)); |
| |
| u2_phy_pll_26m_set(tphy, instance); |
| |
| dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); |
| } |
| |
| static void u2_phy_instance_power_on(struct mtk_tphy *tphy, |
| struct mtk_phy_instance *instance) |
| { |
| struct u2phy_banks *u2_banks = &instance->u2_banks; |
| |
| clrbits_le32(u2_banks->com + U3P_U2PHYDTM0, |
| P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK); |
| |
| /* OTG Enable */ |
| setbits_le32(u2_banks->com + U3P_USBPHYACR6, |
| PA6_RG_U2_OTG_VBUSCMP_EN); |
| |
| clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM1, |
| P2C_RG_SESSEND, P2C_RG_VBUSVALID | P2C_RG_AVALID); |
| |
| dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); |
| } |
| |
| static void u2_phy_instance_power_off(struct mtk_tphy *tphy, |
| struct mtk_phy_instance *instance) |
| { |
| struct u2phy_banks *u2_banks = &instance->u2_banks; |
| |
| clrbits_le32(u2_banks->com + U3P_U2PHYDTM0, |
| P2C_RG_XCVRSEL | P2C_RG_DATAIN); |
| |
| /* OTG Disable */ |
| clrbits_le32(u2_banks->com + U3P_USBPHYACR6, |
| PA6_RG_U2_OTG_VBUSCMP_EN); |
| |
| clrsetbits_le32(u2_banks->com + U3P_U2PHYDTM1, |
| P2C_RG_VBUSVALID | P2C_RG_AVALID, P2C_RG_SESSEND); |
| |
| dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); |
| } |
| |
| static void u3_phy_instance_init(struct mtk_tphy *tphy, |
| struct mtk_phy_instance *instance) |
| { |
| struct u3phy_banks *u3_banks = &instance->u3_banks; |
| |
| /* gating PCIe Analog XTAL clock */ |
| setbits_le32(u3_banks->spllc + U3P_SPLLC_XTALCTL3, |
| XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD); |
| |
| /* gating XSQ */ |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG0, |
| P3A_RG_XTAL_EXT_EN_U3, |
| FIELD_PREP(P3A_RG_XTAL_EXT_EN_U3, 2)); |
| |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG9, |
| P3A_RG_RX_DAC_MUX, FIELD_PREP(P3A_RG_RX_DAC_MUX, 4)); |
| |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG6, |
| P3A_RG_TX_EIDLE_CM, |
| FIELD_PREP(P3A_RG_TX_EIDLE_CM, 0xe)); |
| |
| clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_CDR1, |
| P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1, |
| FIELD_PREP(P3D_RG_CDR_BIR_LTD0, 0xc) | |
| FIELD_PREP(P3D_RG_CDR_BIR_LTD1, 0x3)); |
| |
| clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_LFPS1, |
| P3D_RG_FWAKE_TH, FIELD_PREP(P3D_RG_FWAKE_TH, 0x34)); |
| |
| clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET1, |
| P3D_RG_RXDET_STB2_SET, |
| FIELD_PREP(P3D_RG_RXDET_STB2_SET, 0x10)); |
| |
| clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET2, |
| P3D_RG_RXDET_STB2_SET_P3, |
| FIELD_PREP(P3D_RG_RXDET_STB2_SET_P3, 0x10)); |
| |
| dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); |
| } |
| |
| static void pcie_phy_instance_init(struct mtk_tphy *tphy, |
| struct mtk_phy_instance *instance) |
| { |
| struct u3phy_banks *u3_banks = &instance->u3_banks; |
| |
| if (tphy->pdata->version != MTK_TPHY_V1) |
| return; |
| |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG0, |
| P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H, |
| FIELD_PREP(P3A_RG_XTAL_EXT_PE1H, 0x2) | |
| FIELD_PREP(P3A_RG_XTAL_EXT_PE2H, 0x2)); |
| |
| /* ref clk drive */ |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG1, P3A_RG_CLKDRV_AMP, |
| FIELD_PREP(P3A_RG_CLKDRV_AMP, 0x4)); |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_CLKDRV_OFF, |
| FIELD_PREP(P3A_RG_CLKDRV_OFF, 0x1)); |
| |
| /* SSC delta -5000ppm */ |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG20, |
| P3A_RG_PLL_DELTA1_PE2H, |
| FIELD_PREP(P3A_RG_PLL_DELTA1_PE2H, 0x3c)); |
| |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG25, |
| P3A_RG_PLL_DELTA_PE2H, |
| FIELD_PREP(P3A_RG_PLL_DELTA_PE2H, 0x36)); |
| |
| /* change pll BW 0.6M */ |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG5, |
| P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H, |
| FIELD_PREP(P3A_RG_PLL_BR_PE2H, 0x1) | |
| FIELD_PREP(P3A_RG_PLL_IC_PE2H, 0x1)); |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG4, |
| P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H, |
| FIELD_PREP(P3A_RG_PLL_BC_PE2H, 0x3)); |
| |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG6, |
| P3A_RG_PLL_IR_PE2H, |
| FIELD_PREP(P3A_RG_PLL_IR_PE2H, 0x2)); |
| clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG7, |
| P3A_RG_PLL_BP_PE2H, |
| FIELD_PREP(P3A_RG_PLL_BP_PE2H, 0xa)); |
| |
| /* Tx Detect Rx Timing: 10us -> 5us */ |
| clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET1, |
| P3D_RG_RXDET_STB2_SET, |
| FIELD_PREP(P3D_RG_RXDET_STB2_SET, 0x10)); |
| clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET2, |
| P3D_RG_RXDET_STB2_SET_P3, |
| FIELD_PREP(P3D_RG_RXDET_STB2_SET_P3, 0x10)); |
| |
| /* wait for PCIe subsys register to active */ |
| udelay(3000); |
| } |
| |
| static void sata_phy_instance_init(struct mtk_tphy *tphy, |
| struct mtk_phy_instance *instance) |
| { |
| struct u3phy_banks *u3_banks = &instance->u3_banks; |
| |
| clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL6, |
| RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK, |
| FIELD_PREP(RG_CDR_BIRLTR_GEN1_MSK, 0x6) | |
| FIELD_PREP(RG_CDR_BC_GEN1_MSK, 0x1a)); |
| clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL4, |
| RG_CDR_BIRLTD0_GEN1_MSK, |
| FIELD_PREP(RG_CDR_BIRLTD0_GEN1_MSK, 0x18)); |
| clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL5, |
| RG_CDR_BIRLTD0_GEN3_MSK, |
| FIELD_PREP(RG_CDR_BIRLTD0_GEN3_MSK, 0x06)); |
| clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL4, |
| RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK, |
| FIELD_PREP(RG_CDR_BICLTR_GEN1_MSK, 0x0c) | |
| FIELD_PREP(RG_CDR_BR_GEN2_MSK, 0x07)); |
| clrsetbits_le32(u3_banks->phyd + PHYD_CTRL_SIGNAL_MODE4, |
| RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK, |
| FIELD_PREP(RG_CDR_BICLTD0_GEN1_MSK, 0x08) | |
| FIELD_PREP(RG_CDR_BICLTD1_GEN1_MSK, 0x02)); |
| clrsetbits_le32(u3_banks->phyd + PHYD_DESIGN_OPTION2, |
| RG_LOCK_CNT_SEL_MSK, |
| FIELD_PREP(RG_LOCK_CNT_SEL_MSK, 0x02)); |
| clrsetbits_le32(u3_banks->phyd + PHYD_DESIGN_OPTION9, |
| RG_T2_MIN_MSK | RG_TG_MIN_MSK | |
| RG_T2_MAX_MSK | RG_TG_MAX_MSK, |
| FIELD_PREP(RG_T2_MIN_MSK, 0x12) | |
| FIELD_PREP(RG_TG_MIN_MSK, 0x04) | |
| FIELD_PREP(RG_T2_MAX_MSK, 0x31) | |
| FIELD_PREP(RG_TG_MAX_MSK, 0x0e)); |
| clrsetbits_le32(u3_banks->phyd + ANA_RG_CTRL_SIGNAL1, |
| RG_IDRV_0DB_GEN1_MSK, |
| FIELD_PREP(RG_IDRV_0DB_GEN1_MSK, 0x20)); |
| clrsetbits_le32(u3_banks->phyd + ANA_EQ_EYE_CTRL_SIGNAL1, |
| RG_EQ_DLEQ_LFI_GEN1_MSK, |
| FIELD_PREP(RG_EQ_DLEQ_LFI_GEN1_MSK, 0x03)); |
| } |
| |
| static void pcie_phy_instance_power_on(struct mtk_tphy *tphy, |
| struct mtk_phy_instance *instance) |
| { |
| struct u3phy_banks *bank = &instance->u3_banks; |
| |
| clrbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLD, |
| P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST); |
| clrbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLE, |
| P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD); |
| } |
| |
| static void pcie_phy_instance_power_off(struct mtk_tphy *tphy, |
| struct mtk_phy_instance *instance) |
| |
| { |
| struct u3phy_banks *bank = &instance->u3_banks; |
| |
| setbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLD, |
| P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST); |
| setbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLE, |
| P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD); |
| } |
| |
| static void phy_v1_banks_init(struct mtk_tphy *tphy, |
| struct mtk_phy_instance *instance) |
| { |
| struct u2phy_banks *u2_banks = &instance->u2_banks; |
| struct u3phy_banks *u3_banks = &instance->u3_banks; |
| |
| switch (instance->type) { |
| case PHY_TYPE_USB2: |
| u2_banks->misc = NULL; |
| u2_banks->fmreg = tphy->sif_base + SSUSB_SIFSLV_V1_U2FREQ; |
| u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM; |
| break; |
| case PHY_TYPE_USB3: |
| case PHY_TYPE_PCIE: |
| u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC; |
| u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP; |
| u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD; |
| u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA; |
| break; |
| case PHY_TYPE_SATA: |
| u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD; |
| break; |
| default: |
| dev_err(tphy->dev, "incompatible PHY type\n"); |
| return; |
| } |
| } |
| |
| static void phy_v2_banks_init(struct mtk_tphy *tphy, |
| struct mtk_phy_instance *instance) |
| { |
| struct u2phy_banks *u2_banks = &instance->u2_banks; |
| struct u3phy_banks *u3_banks = &instance->u3_banks; |
| |
| switch (instance->type) { |
| case PHY_TYPE_USB2: |
| u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC; |
| u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ; |
| u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM; |
| break; |
| case PHY_TYPE_USB3: |
| case PHY_TYPE_PCIE: |
| u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC; |
| u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP; |
| u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD; |
| u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA; |
| break; |
| default: |
| dev_err(tphy->dev, "incompatible PHY type\n"); |
| return; |
| } |
| } |
| |
| static int mtk_phy_init(struct phy *phy) |
| { |
| struct mtk_tphy *tphy = dev_get_priv(phy->dev); |
| struct mtk_phy_instance *instance = tphy->phys[phy->id]; |
| int ret; |
| |
| ret = clk_enable(&instance->ref_clk); |
| if (ret < 0) { |
| dev_err(tphy->dev, "failed to enable ref_clk\n"); |
| return ret; |
| } |
| |
| ret = clk_enable(&instance->da_ref_clk); |
| if (ret < 0) { |
| dev_err(tphy->dev, "failed to enable da_ref_clk %d\n", ret); |
| clk_disable(&instance->ref_clk); |
| return ret; |
| } |
| |
| switch (instance->type) { |
| case PHY_TYPE_USB2: |
| u2_phy_instance_init(tphy, instance); |
| break; |
| case PHY_TYPE_USB3: |
| u3_phy_instance_init(tphy, instance); |
| break; |
| case PHY_TYPE_PCIE: |
| pcie_phy_instance_init(tphy, instance); |
| break; |
| case PHY_TYPE_SATA: |
| sata_phy_instance_init(tphy, instance); |
| break; |
| default: |
| dev_err(tphy->dev, "incompatible PHY type\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int mtk_phy_power_on(struct phy *phy) |
| { |
| struct mtk_tphy *tphy = dev_get_priv(phy->dev); |
| struct mtk_phy_instance *instance = tphy->phys[phy->id]; |
| |
| if (instance->type == PHY_TYPE_USB2) |
| u2_phy_instance_power_on(tphy, instance); |
| else if (instance->type == PHY_TYPE_PCIE) |
| pcie_phy_instance_power_on(tphy, instance); |
| |
| return 0; |
| } |
| |
| static int mtk_phy_power_off(struct phy *phy) |
| { |
| struct mtk_tphy *tphy = dev_get_priv(phy->dev); |
| struct mtk_phy_instance *instance = tphy->phys[phy->id]; |
| |
| if (instance->type == PHY_TYPE_USB2) |
| u2_phy_instance_power_off(tphy, instance); |
| else if (instance->type == PHY_TYPE_PCIE) |
| pcie_phy_instance_power_off(tphy, instance); |
| |
| return 0; |
| } |
| |
| static int mtk_phy_exit(struct phy *phy) |
| { |
| struct mtk_tphy *tphy = dev_get_priv(phy->dev); |
| struct mtk_phy_instance *instance = tphy->phys[phy->id]; |
| |
| clk_disable(&instance->da_ref_clk); |
| clk_disable(&instance->ref_clk); |
| |
| return 0; |
| } |
| |
| static int mtk_phy_xlate(struct phy *phy, |
| struct ofnode_phandle_args *args) |
| { |
| struct mtk_tphy *tphy = dev_get_priv(phy->dev); |
| struct mtk_phy_instance *instance = NULL; |
| const struct device_node *phy_np = ofnode_to_np(args->node); |
| u32 index; |
| |
| if (!phy_np) { |
| dev_err(phy->dev, "null pointer phy node\n"); |
| return -EINVAL; |
| } |
| |
| if (args->args_count < 1) { |
| dev_err(phy->dev, "invalid number of cells in 'phy' property\n"); |
| return -EINVAL; |
| } |
| |
| for (index = 0; index < tphy->nphys; index++) |
| if (phy_np == tphy->phys[index]->np) { |
| instance = tphy->phys[index]; |
| break; |
| } |
| |
| if (!instance) { |
| dev_err(phy->dev, "failed to find appropriate phy\n"); |
| return -EINVAL; |
| } |
| |
| phy->id = index; |
| instance->type = args->args[1]; |
| if (!(instance->type == PHY_TYPE_USB2 || |
| instance->type == PHY_TYPE_USB3 || |
| instance->type == PHY_TYPE_SATA || |
| instance->type == PHY_TYPE_PCIE)) { |
| dev_err(phy->dev, "unsupported device type\n"); |
| return -EINVAL; |
| } |
| |
| switch (tphy->pdata->version) { |
| case MTK_TPHY_V1: |
| phy_v1_banks_init(tphy, instance); |
| break; |
| case MTK_TPHY_V2: |
| phy_v2_banks_init(tphy, instance); |
| break; |
| default: |
| dev_err(phy->dev, "phy version is not supported\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct phy_ops mtk_tphy_ops = { |
| .init = mtk_phy_init, |
| .exit = mtk_phy_exit, |
| .power_on = mtk_phy_power_on, |
| .power_off = mtk_phy_power_off, |
| .of_xlate = mtk_phy_xlate, |
| }; |
| |
| static int mtk_tphy_probe(struct udevice *dev) |
| { |
| struct mtk_tphy *tphy = dev_get_priv(dev); |
| ofnode subnode; |
| int index = 0; |
| |
| tphy->nphys = dev_get_child_count(dev); |
| |
| tphy->phys = devm_kcalloc(dev, tphy->nphys, sizeof(*tphy->phys), |
| GFP_KERNEL); |
| if (!tphy->phys) |
| return -ENOMEM; |
| |
| tphy->dev = dev; |
| tphy->pdata = (void *)dev_get_driver_data(dev); |
| |
| /* v1 has shared banks for usb/pcie mode, */ |
| /* but not for sata mode */ |
| if (tphy->pdata->version == MTK_TPHY_V1) |
| tphy->sif_base = dev_read_addr_ptr(dev); |
| |
| dev_for_each_subnode(subnode, dev) { |
| struct mtk_phy_instance *instance; |
| fdt_addr_t addr; |
| int err; |
| |
| instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL); |
| if (!instance) |
| return -ENOMEM; |
| |
| addr = ofnode_get_addr(subnode); |
| if (addr == FDT_ADDR_T_NONE) |
| return -ENOMEM; |
| |
| instance->port_base = map_sysmem(addr, 0); |
| instance->index = index; |
| instance->np = ofnode_to_np(subnode); |
| tphy->phys[index] = instance; |
| index++; |
| |
| err = clk_get_by_name_nodev_optional(subnode, "ref", |
| &instance->ref_clk); |
| if (err) |
| return err; |
| |
| err = clk_get_by_name_nodev_optional(subnode, "da_ref", |
| &instance->da_ref_clk); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static struct tphy_pdata tphy_v1_pdata = { |
| .version = MTK_TPHY_V1, |
| }; |
| |
| static struct tphy_pdata tphy_v2_pdata = { |
| .version = MTK_TPHY_V2, |
| }; |
| |
| static struct tphy_pdata mt8195_pdata = { |
| .version = MTK_TPHY_V2, |
| .sw_pll_48m_to_26m = true, |
| }; |
| |
| static const struct udevice_id mtk_tphy_id_table[] = { |
| { |
| .compatible = "mediatek,generic-tphy-v1", |
| .data = (ulong)&tphy_v1_pdata, |
| }, |
| { |
| .compatible = "mediatek,generic-tphy-v2", |
| .data = (ulong)&tphy_v2_pdata, |
| }, |
| { |
| .compatible = "mediatek,mt8195-tphy", |
| .data = (ulong)&mt8195_pdata, |
| }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(mtk_tphy) = { |
| .name = "mtk-tphy", |
| .id = UCLASS_PHY, |
| .of_match = mtk_tphy_id_table, |
| .ops = &mtk_tphy_ops, |
| .probe = mtk_tphy_probe, |
| .priv_auto = sizeof(struct mtk_tphy), |
| }; |