| // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| /* |
| * Support for imx6 based Advantech DMS-BA16 Qseven module |
| * |
| * Copyright 2015 Timesys Corporation. |
| * Copyright 2015 General Electric Company |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "imx6q.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| memory@10000000 { |
| device_type = "memory"; |
| reg = <0x10000000 0x40000000>; |
| }; |
| |
| backlight_lvds: backlight { |
| compatible = "pwm-backlight"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_display>; |
| pwms = <&pwm1 0 5000000>; |
| brightness-levels = < 0 1 2 3 4 5 6 7 8 9 |
| 10 11 12 13 14 15 16 17 18 19 |
| 20 21 22 23 24 25 26 27 28 29 |
| 30 31 32 33 34 35 36 37 38 39 |
| 40 41 42 43 44 45 46 47 48 49 |
| 50 51 52 53 54 55 56 57 58 59 |
| 60 61 62 63 64 65 66 67 68 69 |
| 70 71 72 73 74 75 76 77 78 79 |
| 80 81 82 83 84 85 86 87 88 89 |
| 90 91 92 93 94 95 96 97 98 99 |
| 100 101 102 103 104 105 106 107 108 109 |
| 110 111 112 113 114 115 116 117 118 119 |
| 120 121 122 123 124 125 126 127 128 129 |
| 130 131 132 133 134 135 136 137 138 139 |
| 140 141 142 143 144 145 146 147 148 149 |
| 150 151 152 153 154 155 156 157 158 159 |
| 160 161 162 163 164 165 166 167 168 169 |
| 170 171 172 173 174 175 176 177 178 179 |
| 180 181 182 183 184 185 186 187 188 189 |
| 190 191 192 193 194 195 196 197 198 199 |
| 200 201 202 203 204 205 206 207 208 209 |
| 210 211 212 213 214 215 216 217 218 219 |
| 220 221 222 223 224 225 226 227 228 229 |
| 230 231 232 233 234 235 236 237 238 239 |
| 240 241 242 243 244 245 246 247 248 249 |
| 250 251 252 253 254 255>; |
| default-brightness-level = <255>; |
| enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| reg_1p8v: regulator-1p8v { |
| compatible = "regulator-fixed"; |
| regulator-name = "1P8V"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v: regulator-3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "3P3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_lvds: regulator-lvds { |
| compatible = "regulator-fixed"; |
| regulator-name = "lvds_ppen"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_h1_vbus: regulator-usbh1vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_h1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| |
| reg_usb_otg_vbus: regulator-usbotgvbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| status = "okay"; |
| }; |
| |
| &ecspi1 { |
| cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| status = "okay"; |
| |
| flash: n25q032@0 { |
| compatible = "jedec,spi-nor"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| spi-max-frequency = <20000000>; |
| reg = <0>; |
| |
| partition@0 { |
| label = "U-Boot"; |
| reg = <0x0 0xc0000>; |
| }; |
| |
| partition@c0000 { |
| label = "env"; |
| reg = <0xc0000 0x10000>; |
| }; |
| |
| partition@d0000 { |
| label = "spare"; |
| reg = <0xd0000 0x320000>; |
| }; |
| |
| partition@3f0000 { |
| label = "mfg"; |
| reg = <0x3f0000 0x10000>; |
| }; |
| }; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| phy-mode = "rgmii-id"; |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| ddc-i2c-bus = <&i2c2>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| |
| pmic@58 { |
| compatible = "dlg,da9063"; |
| reg = <0x58>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pmic>; |
| interrupt-parent = <&gpio7>; |
| interrupts = <13 IRQ_TYPE_LEVEL_LOW>; |
| |
| onkey { |
| compatible = "dlg,da9063-onkey"; |
| }; |
| |
| regulators { |
| vdd_bcore1: bcore1 { |
| regulator-min-microvolt = <1420000>; |
| regulator-max-microvolt = <1420000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vdd_bcore2: bcore2 { |
| regulator-min-microvolt = <1420000>; |
| regulator-max-microvolt = <1420000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vdd_bpro: bpro { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vdd_bmem: bmem { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vdd_bio: bio { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vdd_bperi: bperi { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vdd_ldo1: ldo1 { |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <1860000>; |
| }; |
| |
| vdd_ldo2: ldo2 { |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <1860000>; |
| }; |
| |
| vdd_ldo3: ldo3 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <3440000>; |
| }; |
| |
| vdd_ldo4: ldo4 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <3440000>; |
| }; |
| |
| vdd_ldo5: ldo5 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <3600000>; |
| }; |
| |
| vdd_ldo6: ldo6 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <3600000>; |
| }; |
| |
| vdd_ldo7: ldo7 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <3600000>; |
| }; |
| |
| vdd_ldo8: ldo8 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <3600000>; |
| }; |
| |
| vdd_ldo9: ldo9 { |
| regulator-min-microvolt = <950000>; |
| regulator-max-microvolt = <3600000>; |
| }; |
| |
| vdd_ldo10: ldo10 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <3600000>; |
| }; |
| |
| vdd_ldo11: ldo11 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <3600000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| }; |
| }; |
| |
| rtc@32 { |
| compatible = "epson,rx8010"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rtc>; |
| reg = <0x32>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; |
| fsl,tx-swing-full = <103>; |
| fsl,tx-swing-low = <103>; |
| status = "okay"; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "okay"; |
| }; |
| |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm2>; |
| status = "disabled"; |
| }; |
| |
| &sata { |
| status = "okay"; |
| }; |
| |
| &ssi1 { |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbhub>; |
| vbus-supply = <®_usb_h1_vbus>; |
| reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| vbus-supply = <®_usb_otg_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg>; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| no-1-8-v; |
| keep-power-in-suspend; |
| wakeup-source; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>; |
| bus-width = <8>; |
| vmmc-supply = <&vdd_bperi>; |
| non-removable; |
| keep-power-in-suspend; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 |
| MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 |
| MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 |
| MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 |
| >; |
| }; |
| |
| pinctrl_display: dispgrp { |
| fsl,pins = < |
| /* BLEN_OUT */ |
| MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 |
| /* LVDS_PPEN_OUT */ |
| MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 |
| MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 |
| /* SPI1 CS */ |
| MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_ecspi5: ecspi5grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0 |
| MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0 |
| MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0 |
| MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| /* FEC Reset */ |
| MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 |
| /* AR8033 Interrupt */ |
| MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| /* GPIO 0-7 */ |
| MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 |
| MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 |
| MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 |
| MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 |
| MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 |
| MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0 |
| MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 |
| MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0 |
| /* SUS_S3_OUT to CPLD */ |
| MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_pcie: pciegrp { |
| fsl,pins = < |
| /* PCIe Reset */ |
| MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 |
| /* PCIe Wake */ |
| MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_pmic: pmicgrp { |
| fsl,pins = < |
| /* PMIC Interrupt */ |
| MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_pwm1: pwm1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pwm2: pwm2grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_rtc: rtcgrp { |
| fsl,pins = < |
| /* RTC_INT */ |
| MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 |
| MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbhub: usbhubgrp { |
| fsl,pins = < |
| /* HUB_RESET */ |
| MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_usbotg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 |
| /* uSDHC2 CD */ |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 |
| MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 |
| MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 |
| MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3_reset: usdhc3grp-reset { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9 |
| >; |
| }; |
| |
| pinctrl_usdhc4: usdhc4grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 |
| MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 |
| MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 |
| MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 |
| MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 |
| MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 |
| MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 |
| MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 |
| MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 |
| MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 |
| /* uSDHC4 CD */ |
| MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 |
| /* uSDHC4 SDIO PWR */ |
| MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 |
| /* uSDHC4 SDIO WP */ |
| MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 |
| /* uSDHC4 SDIO LED */ |
| MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 |
| >; |
| }; |
| }; |