| /* |
| * Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm@oevsv.at> |
| * B&R Industrial Automation GmbH - http://www.br-automation.com |
| * |
| * minimal framebuffer driver for TI's AM335x SoC to be compatible with |
| * Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c) |
| * |
| * - supporting 16/24/32bit RGB/TFT raster Mode (not using palette) |
| * - sets up LCD controller as in 'am335x_lcdpanel' struct given |
| * - starts output DMA from gd->fb_base buffer |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/omap.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sys_proto.h> |
| #include <lcd.h> |
| #include "am335x-fb.h" |
| |
| #if !defined(LCD_CNTL_BASE) |
| #error "hw-base address of LCD-Controller (LCD_CNTL_BASE) not defined!" |
| #endif |
| |
| #define LCDC_FMAX 200000000 |
| |
| /* LCD Control Register */ |
| #define LCD_CLK_DIVISOR(x) ((x) << 8) |
| #define LCD_RASTER_MODE 0x01 |
| /* LCD Clock Enable Register */ |
| #define LCD_CORECLKEN (0x01 << 0) |
| #define LCD_LIDDCLKEN (0x01 << 1) |
| #define LCD_DMACLKEN (0x01 << 2) |
| /* LCD DMA Control Register */ |
| #define LCD_DMA_BURST_SIZE(x) ((x) << 4) |
| #define LCD_DMA_BURST_1 0x0 |
| #define LCD_DMA_BURST_2 0x1 |
| #define LCD_DMA_BURST_4 0x2 |
| #define LCD_DMA_BURST_8 0x3 |
| #define LCD_DMA_BURST_16 0x4 |
| /* LCD Timing_0 Register */ |
| #define LCD_HBPLSB(x) ((((x)-1) & 0xFF) << 24) |
| #define LCD_HFPLSB(x) ((((x)-1) & 0xFF) << 16) |
| #define LCD_HSWLSB(x) ((((x)-1) & 0x3F) << 10) |
| #define LCD_HORLSB(x) (((((x) >> 4)-1) & 0x3F) << 4) |
| #define LCD_HORMSB(x) (((((x) >> 4)-1) & 0x40) >> 4) |
| /* LCD Timing_1 Register */ |
| #define LCD_VBP(x) ((x) << 24) |
| #define LCD_VFP(x) ((x) << 16) |
| #define LCD_VSW(x) (((x)-1) << 10) |
| #define LCD_VERLSB(x) (((x)-1) & 0x3FF) |
| /* LCD Timing_2 Register */ |
| #define LCD_HSWMSB(x) ((((x)-1) & 0x3C0) << 21) |
| #define LCD_VERMSB(x) ((((x)-1) & 0x400) << 16) |
| #define LCD_HBPMSB(x) ((((x)-1) & 0x300) >> 4) |
| #define LCD_HFPMSB(x) ((((x)-1) & 0x300) >> 8) |
| #define LCD_INVMASK(x) ((x) & 0x3F00000) |
| /* LCD Raster Ctrl Register */ |
| #define LCD_TFT_24BPP_MODE (1 << 25) |
| #define LCD_TFT_24BPP_UNPACK (1 << 26) |
| #define LCD_PALMODE_RAWDATA (0x02 << 20) |
| #define LCD_TFT_MODE (0x01 << 7) |
| #define LCD_RASTER_ENABLE (0x01 << 0) |
| |
| |
| /* Macro definitions */ |
| #define FBSIZE(x) ((x->hactive * x->vactive * x->bpp) >> 3) |
| |
| struct am335x_lcdhw { |
| unsigned int pid; /* 0x00 */ |
| unsigned int ctrl; /* 0x04 */ |
| unsigned int gap0; /* 0x08 */ |
| unsigned int lidd_ctrl; /* 0x0C */ |
| unsigned int lidd_cs0_conf; /* 0x10 */ |
| unsigned int lidd_cs0_addr; /* 0x14 */ |
| unsigned int lidd_cs0_data; /* 0x18 */ |
| unsigned int lidd_cs1_conf; /* 0x1C */ |
| unsigned int lidd_cs1_addr; /* 0x20 */ |
| unsigned int lidd_cs1_data; /* 0x24 */ |
| unsigned int raster_ctrl; /* 0x28 */ |
| unsigned int raster_timing0; /* 0x2C */ |
| unsigned int raster_timing1; /* 0x30 */ |
| unsigned int raster_timing2; /* 0x34 */ |
| unsigned int raster_subpanel; /* 0x38 */ |
| unsigned int raster_subpanel2; /* 0x3C */ |
| unsigned int lcddma_ctrl; /* 0x40 */ |
| unsigned int lcddma_fb0_base; /* 0x44 */ |
| unsigned int lcddma_fb0_ceiling; /* 0x48 */ |
| unsigned int lcddma_fb1_base; /* 0x4C */ |
| unsigned int lcddma_fb1_ceiling; /* 0x50 */ |
| unsigned int sysconfig; /* 0x54 */ |
| unsigned int irqstatus_raw; /* 0x58 */ |
| unsigned int irqstatus; /* 0x5C */ |
| unsigned int irqenable_set; /* 0x60 */ |
| unsigned int irqenable_clear; /* 0x64 */ |
| unsigned int gap1; /* 0x68 */ |
| unsigned int clkc_enable; /* 0x6C */ |
| unsigned int clkc_reset; /* 0x70 */ |
| }; |
| |
| static struct am335x_lcdhw *lcdhw = (void *)LCD_CNTL_BASE; |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int lcd_get_size(int *line_length) |
| { |
| *line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; |
| return *line_length * panel_info.vl_row + 0x20; |
| } |
| |
| int am335xfb_init(struct am335x_lcdpanel *panel) |
| { |
| u32 raster_ctrl = 0; |
| |
| struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL; |
| struct dpll_params dpll_disp = { 1, 0, 1, -1, -1, -1, -1 }; |
| unsigned int m, n, d, best_d = 2; |
| int err = 0, err_r = 0; |
| |
| if (gd->fb_base == 0) { |
| printf("ERROR: no valid fb_base stored in GLOBAL_DATA_PTR!\n"); |
| return -1; |
| } |
| if (panel == NULL) { |
| printf("ERROR: missing ptr to am335x_lcdpanel!\n"); |
| return -1; |
| } |
| |
| /* We can already set the bits for the raster_ctrl in this check */ |
| switch (panel->bpp) { |
| case 16: |
| break; |
| case 32: |
| raster_ctrl |= LCD_TFT_24BPP_UNPACK; |
| /* fallthrough */ |
| case 24: |
| raster_ctrl |= LCD_TFT_24BPP_MODE; |
| break; |
| default: |
| pr_err("am335x-fb: invalid bpp value: %d\n", panel->bpp); |
| return -1; |
| } |
| |
| /* check given clock-frequency */ |
| if (panel->pxl_clk > (LCDC_FMAX / 2)) { |
| pr_err("am335x-fb: requested pxl-clk: %d not supported!\n", |
| panel->pxl_clk); |
| return -1; |
| } |
| |
| debug("setting up LCD-Controller for %dx%dx%d (hfp=%d,hbp=%d,hsw=%d / ", |
| panel->hactive, panel->vactive, panel->bpp, |
| panel->hfp, panel->hbp, panel->hsw); |
| debug("vfp=%d,vbp=%d,vsw=%d / clk=%d)\n", |
| panel->vfp, panel->vfp, panel->vsw, panel->pxl_clk); |
| debug("using frambuffer at 0x%08x with size %d.\n", |
| (unsigned int)gd->fb_base, FBSIZE(panel)); |
| |
| /* setup display pll for requested clock frequency */ |
| err = panel->pxl_clk; |
| err_r = err; |
| |
| for (d = 2; d < 255; d++) { |
| for (m = 2; m < 2047; m++) { |
| if ((V_OSCK * m) < (panel->pxl_clk * d)) |
| continue; |
| n = (V_OSCK * m) / (panel->pxl_clk * d); |
| if (n > 127) |
| break; |
| if (((V_OSCK * m) / n) > LCDC_FMAX) |
| break; |
| |
| err = abs((V_OSCK * m) / n / d - panel->pxl_clk); |
| if (err < err_r) { |
| err_r = err; |
| dpll_disp.m = m; |
| dpll_disp.n = n; |
| best_d = d; |
| } |
| } |
| } |
| debug("%s: PLL: best error %d Hz (M %d, N %d, DISP %d)\n", |
| __func__, err_r, dpll_disp.m, dpll_disp.n, best_d); |
| do_setup_dpll(&dpll_disp_regs, &dpll_disp); |
| |
| /* clock source for LCDC from dispPLL M2 */ |
| writel(0x0, &cmdpll->clklcdcpixelclk); |
| |
| /* palette default entry */ |
| memset((void *)gd->fb_base, 0, 0x20); |
| *(unsigned int *)gd->fb_base = 0x4000; |
| /* point fb behind palette */ |
| gd->fb_base += 0x20; |
| |
| /* turn ON display through powercontrol function if accessible */ |
| if (panel->panel_power_ctrl != NULL) |
| panel->panel_power_ctrl(1); |
| |
| debug("am335x-fb: wait for stable power ...\n"); |
| mdelay(panel->pup_delay); |
| lcdhw->clkc_enable = LCD_CORECLKEN | LCD_LIDDCLKEN | LCD_DMACLKEN; |
| lcdhw->raster_ctrl = 0; |
| lcdhw->ctrl = LCD_CLK_DIVISOR(best_d) | LCD_RASTER_MODE; |
| lcdhw->lcddma_fb0_base = gd->fb_base; |
| lcdhw->lcddma_fb0_ceiling = gd->fb_base + FBSIZE(panel); |
| lcdhw->lcddma_fb1_base = gd->fb_base; |
| lcdhw->lcddma_fb1_ceiling = gd->fb_base + FBSIZE(panel); |
| lcdhw->lcddma_ctrl = LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16); |
| |
| lcdhw->raster_timing0 = LCD_HORLSB(panel->hactive) | |
| LCD_HORMSB(panel->hactive) | |
| LCD_HFPLSB(panel->hfp) | |
| LCD_HBPLSB(panel->hbp) | |
| LCD_HSWLSB(panel->hsw); |
| lcdhw->raster_timing1 = LCD_VBP(panel->vbp) | |
| LCD_VFP(panel->vfp) | |
| LCD_VSW(panel->vsw) | |
| LCD_VERLSB(panel->vactive); |
| lcdhw->raster_timing2 = LCD_HSWMSB(panel->hsw) | |
| LCD_VERMSB(panel->vactive) | |
| LCD_INVMASK(panel->pol) | |
| LCD_HBPMSB(panel->hbp) | |
| LCD_HFPMSB(panel->hfp) | |
| 0x0000FF00; /* clk cycles for ac-bias */ |
| lcdhw->raster_ctrl = raster_ctrl | |
| LCD_PALMODE_RAWDATA | |
| LCD_TFT_MODE | |
| LCD_RASTER_ENABLE; |
| |
| debug("am335x-fb: waiting picture to be stable.\n."); |
| mdelay(panel->pon_delay); |
| |
| return 0; |
| } |