| /* |
| * Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm@oevsv.at> - |
| * B&R Industrial Automation GmbH - http://www.br-automation.com |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef AM335X_FB_H |
| #define AM335X_FB_H |
| |
| #define HSVS_CONTROL (0x01 << 25) /* |
| * 0 = lcd_lp and lcd_fp are driven on |
| * opposite edges of pixel clock than |
| * the lcd_pixel_o |
| * 1 = lcd_lp and lcd_fp are driven |
| * according to bit 24 Note that this |
| * bit MUST be set to '0' for Passive |
| * Matrix displays the edge timing is |
| * fixed |
| */ |
| #define HSVS_RISEFALL (0x01 << 24) /* |
| * 0 = lcd_lp and lcd_fp are driven on |
| * the rising edge of pixel clock (bit |
| * 25 must be set to 1) |
| * 1 = lcd_lp and lcd_fp are driven on |
| * the falling edge of pixel clock (bit |
| * 25 must be set to 1) |
| */ |
| #define DE_INVERT (0x01 << 23) /* |
| * 0 = DE is low-active |
| * 1 = DE is high-active |
| */ |
| #define PXCLK_INVERT (0x01 << 22) /* |
| * 0 = pix-clk is high-active |
| * 1 = pic-clk is low-active |
| */ |
| #define HSYNC_INVERT (0x01 << 21) /* |
| * 0 = HSYNC is active high |
| * 1 = HSYNC is avtive low |
| */ |
| #define VSYNC_INVERT (0x01 << 20) /* |
| * 0 = VSYNC is active high |
| * 1 = VSYNC is active low |
| */ |
| |
| struct am335x_lcdpanel { |
| unsigned int hactive; /* Horizontal active area */ |
| unsigned int vactive; /* Vertical active area */ |
| unsigned int bpp; /* bits per pixel */ |
| unsigned int hfp; /* Horizontal front porch */ |
| unsigned int hbp; /* Horizontal back porch */ |
| unsigned int hsw; /* Horizontal Sync Pulse Width */ |
| unsigned int vfp; /* Vertical front porch */ |
| unsigned int vbp; /* Vertical back porch */ |
| unsigned int vsw; /* Vertical Sync Pulse Width */ |
| unsigned int pxl_clk; /* Pixel clock */ |
| unsigned int pol; /* polarity of sync, clock signals */ |
| unsigned int pup_delay; /* |
| * time in ms after power on to |
| * initialization of lcd-controller |
| * (VCC ramp up time) |
| */ |
| unsigned int pon_delay; /* |
| * time in ms after initialization of |
| * lcd-controller (pic stabilization) |
| */ |
| void (*panel_power_ctrl)(int); /* fp for power on/off display */ |
| }; |
| |
| int am335xfb_init(struct am335x_lcdpanel *panel); |
| |
| #endif /* AM335X_FB_H */ |