| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2011, Marvell Semiconductor Inc. |
| * Lei Wen <leiwen@marvell.com> |
| * |
| * Back ported to the 8xx platform (from the 8260 platform) by |
| * Murray.Jensen@cmst.csiro.au, 27-Jan-01. |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <config.h> |
| #include <cpu_func.h> |
| #include <net.h> |
| #include <malloc.h> |
| #include <asm/byteorder.h> |
| #include <linux/errno.h> |
| #include <asm/io.h> |
| #include <asm/unaligned.h> |
| #include <linux/types.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <usb/ci_udc.h> |
| #include "../host/ehci.h" |
| #include "ci_udc.h" |
| |
| /* |
| * Check if the system has too long cachelines. If the cachelines are |
| * longer then 128b, the driver will not be able flush/invalidate data |
| * cache over separate QH entries. We use 128b because one QH entry is |
| * 64b long and there are always two QH list entries for each endpoint. |
| */ |
| #if ARCH_DMA_MINALIGN > 128 |
| #error This driver can not work on systems with caches longer than 128b |
| #endif |
| |
| /* |
| * Every QTD must be individually aligned, since we can program any |
| * QTD's address into HW. Cache flushing requires ARCH_DMA_MINALIGN, |
| * and the USB HW requires 32-byte alignment. Align to both: |
| */ |
| #define ILIST_ALIGN roundup(ARCH_DMA_MINALIGN, 32) |
| /* Each QTD is this size */ |
| #define ILIST_ENT_RAW_SZ sizeof(struct ept_queue_item) |
| /* |
| * Align the size of the QTD too, so we can add this value to each |
| * QTD's address to get another aligned address. |
| */ |
| #define ILIST_ENT_SZ roundup(ILIST_ENT_RAW_SZ, ILIST_ALIGN) |
| /* For each endpoint, we need 2 QTDs, one for each of IN and OUT */ |
| #define ILIST_SZ (NUM_ENDPOINTS * 2 * ILIST_ENT_SZ) |
| |
| #define EP_MAX_LENGTH_TRANSFER 0x4000 |
| |
| #ifndef DEBUG |
| #define DBG(x...) do {} while (0) |
| #else |
| #define DBG(x...) printf(x) |
| static const char *reqname(unsigned r) |
| { |
| switch (r) { |
| case USB_REQ_GET_STATUS: return "GET_STATUS"; |
| case USB_REQ_CLEAR_FEATURE: return "CLEAR_FEATURE"; |
| case USB_REQ_SET_FEATURE: return "SET_FEATURE"; |
| case USB_REQ_SET_ADDRESS: return "SET_ADDRESS"; |
| case USB_REQ_GET_DESCRIPTOR: return "GET_DESCRIPTOR"; |
| case USB_REQ_SET_DESCRIPTOR: return "SET_DESCRIPTOR"; |
| case USB_REQ_GET_CONFIGURATION: return "GET_CONFIGURATION"; |
| case USB_REQ_SET_CONFIGURATION: return "SET_CONFIGURATION"; |
| case USB_REQ_GET_INTERFACE: return "GET_INTERFACE"; |
| case USB_REQ_SET_INTERFACE: return "SET_INTERFACE"; |
| default: return "*UNKNOWN*"; |
| } |
| } |
| #endif |
| |
| static struct usb_endpoint_descriptor ep0_desc = { |
| .bLength = sizeof(struct usb_endpoint_descriptor), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| }; |
| |
| static int ci_pullup(struct usb_gadget *gadget, int is_on); |
| static int ci_ep_enable(struct usb_ep *ep, |
| const struct usb_endpoint_descriptor *desc); |
| static int ci_ep_disable(struct usb_ep *ep); |
| static int ci_ep_queue(struct usb_ep *ep, |
| struct usb_request *req, gfp_t gfp_flags); |
| static int ci_ep_dequeue(struct usb_ep *ep, struct usb_request *req); |
| static struct usb_request * |
| ci_ep_alloc_request(struct usb_ep *ep, unsigned int gfp_flags); |
| static void ci_ep_free_request(struct usb_ep *ep, struct usb_request *_req); |
| |
| static struct usb_gadget_ops ci_udc_ops = { |
| .pullup = ci_pullup, |
| }; |
| |
| static struct usb_ep_ops ci_ep_ops = { |
| .enable = ci_ep_enable, |
| .disable = ci_ep_disable, |
| .queue = ci_ep_queue, |
| .dequeue = ci_ep_dequeue, |
| .alloc_request = ci_ep_alloc_request, |
| .free_request = ci_ep_free_request, |
| }; |
| |
| __weak void ci_init_after_reset(struct ehci_ctrl *ctrl) |
| { |
| } |
| |
| /* Init values for USB endpoints. */ |
| static const struct usb_ep ci_ep_init[5] = { |
| [0] = { /* EP 0 */ |
| .maxpacket = 64, |
| .name = "ep0", |
| .ops = &ci_ep_ops, |
| }, |
| [1] = { |
| .maxpacket = 512, |
| .name = "ep1in-bulk", |
| .ops = &ci_ep_ops, |
| }, |
| [2] = { |
| .maxpacket = 512, |
| .name = "ep2out-bulk", |
| .ops = &ci_ep_ops, |
| }, |
| [3] = { |
| .maxpacket = 512, |
| .name = "ep3in-int", |
| .ops = &ci_ep_ops, |
| }, |
| [4] = { |
| .maxpacket = 512, |
| .name = "ep-", |
| .ops = &ci_ep_ops, |
| }, |
| }; |
| |
| static struct ci_drv controller = { |
| .gadget = { |
| .name = "ci_udc", |
| .ops = &ci_udc_ops, |
| .is_dualspeed = 1, |
| }, |
| }; |
| |
| /** |
| * ci_get_qh() - return queue head for endpoint |
| * @ep_num: Endpoint number |
| * @dir_in: Direction of the endpoint (IN = 1, OUT = 0) |
| * |
| * This function returns the QH associated with particular endpoint |
| * and it's direction. |
| */ |
| static struct ept_queue_head *ci_get_qh(int ep_num, int dir_in) |
| { |
| return &controller.epts[(ep_num * 2) + dir_in]; |
| } |
| |
| /** |
| * ci_get_qtd() - return queue item for endpoint |
| * @ep_num: Endpoint number |
| * @dir_in: Direction of the endpoint (IN = 1, OUT = 0) |
| * |
| * This function returns the QH associated with particular endpoint |
| * and it's direction. |
| */ |
| static struct ept_queue_item *ci_get_qtd(int ep_num, int dir_in) |
| { |
| int index = (ep_num * 2) + dir_in; |
| uint8_t *imem = controller.items_mem + (index * ILIST_ENT_SZ); |
| return (struct ept_queue_item *)imem; |
| } |
| |
| /** |
| * ci_flush_qh - flush cache over queue head |
| * @ep_num: Endpoint number |
| * |
| * This function flushes cache over QH for particular endpoint. |
| */ |
| static void ci_flush_qh(int ep_num) |
| { |
| struct ept_queue_head *head = ci_get_qh(ep_num, 0); |
| const unsigned long start = (unsigned long)head; |
| const unsigned long end = start + 2 * sizeof(*head); |
| |
| flush_dcache_range(start, end); |
| } |
| |
| /** |
| * ci_invalidate_qh - invalidate cache over queue head |
| * @ep_num: Endpoint number |
| * |
| * This function invalidates cache over QH for particular endpoint. |
| */ |
| static void ci_invalidate_qh(int ep_num) |
| { |
| struct ept_queue_head *head = ci_get_qh(ep_num, 0); |
| unsigned long start = (unsigned long)head; |
| unsigned long end = start + 2 * sizeof(*head); |
| |
| invalidate_dcache_range(start, end); |
| } |
| |
| /** |
| * ci_flush_qtd - flush cache over queue item |
| * @ep_num: Endpoint number |
| * |
| * This function flushes cache over qTD pair for particular endpoint. |
| */ |
| static void ci_flush_qtd(int ep_num) |
| { |
| struct ept_queue_item *item = ci_get_qtd(ep_num, 0); |
| const unsigned long start = (unsigned long)item; |
| const unsigned long end = start + 2 * ILIST_ENT_SZ; |
| |
| flush_dcache_range(start, end); |
| } |
| |
| /** |
| * ci_flush_td - flush cache over queue item |
| * @td: td pointer |
| * |
| * This function flushes cache for particular transfer descriptor. |
| */ |
| static void ci_flush_td(struct ept_queue_item *td) |
| { |
| const unsigned long start = (unsigned long)td; |
| const unsigned long end = (unsigned long)td + ILIST_ENT_SZ; |
| flush_dcache_range(start, end); |
| } |
| |
| /** |
| * ci_invalidate_qtd - invalidate cache over queue item |
| * @ep_num: Endpoint number |
| * |
| * This function invalidates cache over qTD pair for particular endpoint. |
| */ |
| static void ci_invalidate_qtd(int ep_num) |
| { |
| struct ept_queue_item *item = ci_get_qtd(ep_num, 0); |
| const unsigned long start = (unsigned long)item; |
| const unsigned long end = start + 2 * ILIST_ENT_SZ; |
| |
| invalidate_dcache_range(start, end); |
| } |
| |
| /** |
| * ci_invalidate_td - invalidate cache over queue item |
| * @td: td pointer |
| * |
| * This function invalidates cache for particular transfer descriptor. |
| */ |
| static void ci_invalidate_td(struct ept_queue_item *td) |
| { |
| const unsigned long start = (unsigned long)td; |
| const unsigned long end = start + ILIST_ENT_SZ; |
| invalidate_dcache_range(start, end); |
| } |
| |
| static struct usb_request * |
| ci_ep_alloc_request(struct usb_ep *ep, unsigned int gfp_flags) |
| { |
| struct ci_ep *ci_ep = container_of(ep, struct ci_ep, ep); |
| int num = -1; |
| struct ci_req *ci_req; |
| |
| if (ci_ep->desc) |
| num = ci_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| |
| if (num == 0 && controller.ep0_req) |
| return &controller.ep0_req->req; |
| |
| ci_req = calloc(1, sizeof(*ci_req)); |
| if (!ci_req) |
| return NULL; |
| |
| INIT_LIST_HEAD(&ci_req->queue); |
| |
| if (num == 0) |
| controller.ep0_req = ci_req; |
| |
| return &ci_req->req; |
| } |
| |
| static void ci_ep_free_request(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct ci_ep *ci_ep = container_of(ep, struct ci_ep, ep); |
| struct ci_req *ci_req = container_of(req, struct ci_req, req); |
| int num = -1; |
| |
| if (ci_ep->desc) |
| num = ci_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| |
| if (num == 0) { |
| if (!controller.ep0_req) |
| return; |
| controller.ep0_req = 0; |
| } |
| |
| if (ci_req->b_buf) |
| free(ci_req->b_buf); |
| free(ci_req); |
| } |
| |
| static void ep_enable(int num, int in, int maxpacket) |
| { |
| struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor; |
| unsigned n; |
| |
| n = readl(&udc->epctrl[num]); |
| if (in) |
| n |= (CTRL_TXE | CTRL_TXR | CTRL_TXT_BULK); |
| else |
| n |= (CTRL_RXE | CTRL_RXR | CTRL_RXT_BULK); |
| |
| if (num != 0) { |
| struct ept_queue_head *head = ci_get_qh(num, in); |
| |
| head->config = CONFIG_MAX_PKT(maxpacket) | CONFIG_ZLT; |
| ci_flush_qh(num); |
| } |
| writel(n, &udc->epctrl[num]); |
| } |
| |
| static int ci_ep_enable(struct usb_ep *ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct ci_ep *ci_ep = container_of(ep, struct ci_ep, ep); |
| int num, in; |
| num = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| in = (desc->bEndpointAddress & USB_DIR_IN) != 0; |
| ci_ep->desc = desc; |
| |
| if (num) { |
| int max = get_unaligned_le16(&desc->wMaxPacketSize); |
| |
| if ((max > 64) && (controller.gadget.speed == USB_SPEED_FULL)) |
| max = 64; |
| if (ep->maxpacket != max) { |
| DBG("%s: from %d to %d\n", __func__, |
| ep->maxpacket, max); |
| ep->maxpacket = max; |
| } |
| } |
| ep_enable(num, in, ep->maxpacket); |
| DBG("%s: num=%d maxpacket=%d\n", __func__, num, ep->maxpacket); |
| return 0; |
| } |
| |
| static int ci_ep_disable(struct usb_ep *ep) |
| { |
| struct ci_ep *ci_ep = container_of(ep, struct ci_ep, ep); |
| |
| ci_ep->desc = NULL; |
| return 0; |
| } |
| |
| static int ci_bounce(struct ci_req *ci_req, int in) |
| { |
| struct usb_request *req = &ci_req->req; |
| unsigned long addr = (unsigned long)req->buf; |
| unsigned long hwaddr; |
| uint32_t aligned_used_len; |
| |
| /* Input buffer address is not aligned. */ |
| if (addr & (ARCH_DMA_MINALIGN - 1)) |
| goto align; |
| |
| /* Input buffer length is not aligned. */ |
| if (req->length & (ARCH_DMA_MINALIGN - 1)) |
| goto align; |
| |
| /* The buffer is well aligned, only flush cache. */ |
| ci_req->hw_len = req->length; |
| ci_req->hw_buf = req->buf; |
| goto flush; |
| |
| align: |
| if (ci_req->b_buf && req->length > ci_req->b_len) { |
| free(ci_req->b_buf); |
| ci_req->b_buf = 0; |
| } |
| if (!ci_req->b_buf) { |
| ci_req->b_len = roundup(req->length, ARCH_DMA_MINALIGN); |
| ci_req->b_buf = memalign(ARCH_DMA_MINALIGN, ci_req->b_len); |
| if (!ci_req->b_buf) |
| return -ENOMEM; |
| } |
| ci_req->hw_len = ci_req->b_len; |
| ci_req->hw_buf = ci_req->b_buf; |
| |
| if (in) |
| memcpy(ci_req->hw_buf, req->buf, req->length); |
| |
| flush: |
| hwaddr = (unsigned long)ci_req->hw_buf; |
| aligned_used_len = roundup(req->length, ARCH_DMA_MINALIGN); |
| flush_dcache_range(hwaddr, hwaddr + aligned_used_len); |
| |
| return 0; |
| } |
| |
| static void ci_debounce(struct ci_req *ci_req, int in) |
| { |
| struct usb_request *req = &ci_req->req; |
| unsigned long addr = (unsigned long)req->buf; |
| unsigned long hwaddr = (unsigned long)ci_req->hw_buf; |
| uint32_t aligned_used_len; |
| |
| if (in) |
| return; |
| |
| aligned_used_len = roundup(req->actual, ARCH_DMA_MINALIGN); |
| invalidate_dcache_range(hwaddr, hwaddr + aligned_used_len); |
| |
| if (addr == hwaddr) |
| return; /* not a bounce */ |
| |
| memcpy(req->buf, ci_req->hw_buf, req->actual); |
| } |
| |
| static void ci_ep_submit_next_request(struct ci_ep *ci_ep) |
| { |
| struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor; |
| struct ept_queue_item *item; |
| struct ept_queue_head *head; |
| int bit, num, len, in; |
| struct ci_req *ci_req; |
| u8 *buf; |
| uint32_t len_left, len_this_dtd; |
| struct ept_queue_item *dtd, *qtd; |
| |
| ci_ep->req_primed = true; |
| |
| num = ci_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| in = (ci_ep->desc->bEndpointAddress & USB_DIR_IN) != 0; |
| item = ci_get_qtd(num, in); |
| head = ci_get_qh(num, in); |
| |
| ci_req = list_first_entry(&ci_ep->queue, struct ci_req, queue); |
| len = ci_req->req.length; |
| |
| head->next = (unsigned long)item; |
| head->info = 0; |
| |
| ci_req->dtd_count = 0; |
| buf = ci_req->hw_buf; |
| len_left = len; |
| dtd = item; |
| |
| do { |
| len_this_dtd = min(len_left, (unsigned)EP_MAX_LENGTH_TRANSFER); |
| |
| dtd->info = INFO_BYTES(len_this_dtd) | INFO_ACTIVE; |
| dtd->page0 = (unsigned long)buf; |
| dtd->page1 = ((unsigned long)buf & 0xfffff000) + 0x1000; |
| dtd->page2 = ((unsigned long)buf & 0xfffff000) + 0x2000; |
| dtd->page3 = ((unsigned long)buf & 0xfffff000) + 0x3000; |
| dtd->page4 = ((unsigned long)buf & 0xfffff000) + 0x4000; |
| |
| len_left -= len_this_dtd; |
| buf += len_this_dtd; |
| |
| if (len_left) { |
| qtd = (struct ept_queue_item *) |
| memalign(ILIST_ALIGN, ILIST_ENT_SZ); |
| dtd->next = (unsigned long)qtd; |
| dtd = qtd; |
| memset(dtd, 0, ILIST_ENT_SZ); |
| } |
| |
| ci_req->dtd_count++; |
| } while (len_left); |
| |
| item = dtd; |
| /* |
| * When sending the data for an IN transaction, the attached host |
| * knows that all data for the IN is sent when one of the following |
| * occurs: |
| * a) A zero-length packet is transmitted. |
| * b) A packet with length that isn't an exact multiple of the ep's |
| * maxpacket is transmitted. |
| * c) Enough data is sent to exactly fill the host's maximum expected |
| * IN transaction size. |
| * |
| * One of these conditions MUST apply at the end of an IN transaction, |
| * or the transaction will not be considered complete by the host. If |
| * none of (a)..(c) already applies, then we must force (a) to apply |
| * by explicitly sending an extra zero-length packet. |
| */ |
| /* IN !a !b !c */ |
| if (in && len && !(len % ci_ep->ep.maxpacket) && ci_req->req.zero) { |
| /* |
| * Each endpoint has 2 items allocated, even though typically |
| * only 1 is used at a time since either an IN or an OUT but |
| * not both is queued. For an IN transaction, item currently |
| * points at the second of these items, so we know that we |
| * can use the other to transmit the extra zero-length packet. |
| */ |
| struct ept_queue_item *other_item = ci_get_qtd(num, 0); |
| item->next = (unsigned long)other_item; |
| item = other_item; |
| item->info = INFO_ACTIVE; |
| } |
| |
| item->next = TERMINATE; |
| item->info |= INFO_IOC; |
| |
| ci_flush_qtd(num); |
| |
| item = (struct ept_queue_item *)(unsigned long)head->next; |
| while (item->next != TERMINATE) { |
| ci_flush_td((struct ept_queue_item *)(unsigned long)item->next); |
| item = (struct ept_queue_item *)(unsigned long)item->next; |
| } |
| |
| DBG("ept%d %s queue len %x, req %p, buffer %p\n", |
| num, in ? "in" : "out", len, ci_req, ci_req->hw_buf); |
| ci_flush_qh(num); |
| |
| if (in) |
| bit = EPT_TX(num); |
| else |
| bit = EPT_RX(num); |
| |
| writel(bit, &udc->epprime); |
| } |
| |
| static int ci_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct ci_ep *ci_ep = container_of(_ep, struct ci_ep, ep); |
| struct ci_req *ci_req; |
| |
| list_for_each_entry(ci_req, &ci_ep->queue, queue) { |
| if (&ci_req->req == _req) |
| break; |
| } |
| |
| if (&ci_req->req != _req) |
| return -EINVAL; |
| |
| list_del_init(&ci_req->queue); |
| |
| if (ci_req->req.status == -EINPROGRESS) { |
| ci_req->req.status = -ECONNRESET; |
| if (ci_req->req.complete) |
| ci_req->req.complete(_ep, _req); |
| } |
| |
| return 0; |
| } |
| |
| static int ci_ep_queue(struct usb_ep *ep, |
| struct usb_request *req, gfp_t gfp_flags) |
| { |
| struct ci_ep *ci_ep = container_of(ep, struct ci_ep, ep); |
| struct ci_req *ci_req = container_of(req, struct ci_req, req); |
| int in, ret; |
| int __maybe_unused num; |
| |
| num = ci_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| in = (ci_ep->desc->bEndpointAddress & USB_DIR_IN) != 0; |
| |
| if (!num && ci_ep->req_primed) { |
| /* |
| * The flipping of ep0 between IN and OUT relies on |
| * ci_ep_queue consuming the current IN/OUT setting |
| * immediately. If this is deferred to a later point when the |
| * req is pulled out of ci_req->queue, then the IN/OUT setting |
| * may have been changed since the req was queued, and state |
| * will get out of sync. This condition doesn't occur today, |
| * but could if bugs were introduced later, and this error |
| * check will save a lot of debugging time. |
| */ |
| printf("%s: ep0 transaction already in progress\n", __func__); |
| return -EPROTO; |
| } |
| |
| ret = ci_bounce(ci_req, in); |
| if (ret) |
| return ret; |
| |
| DBG("ept%d %s pre-queue req %p, buffer %p\n", |
| num, in ? "in" : "out", ci_req, ci_req->hw_buf); |
| list_add_tail(&ci_req->queue, &ci_ep->queue); |
| |
| if (!ci_ep->req_primed) |
| ci_ep_submit_next_request(ci_ep); |
| |
| return 0; |
| } |
| |
| static void flip_ep0_direction(void) |
| { |
| if (ep0_desc.bEndpointAddress == USB_DIR_IN) { |
| DBG("%s: Flipping ep0 to OUT\n", __func__); |
| ep0_desc.bEndpointAddress = 0; |
| } else { |
| DBG("%s: Flipping ep0 to IN\n", __func__); |
| ep0_desc.bEndpointAddress = USB_DIR_IN; |
| } |
| } |
| |
| static void handle_ep_complete(struct ci_ep *ci_ep) |
| { |
| struct ept_queue_item *item, *next_td; |
| int num, in, len, j; |
| struct ci_req *ci_req; |
| |
| num = ci_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; |
| in = (ci_ep->desc->bEndpointAddress & USB_DIR_IN) != 0; |
| item = ci_get_qtd(num, in); |
| ci_invalidate_qtd(num); |
| ci_req = list_first_entry(&ci_ep->queue, struct ci_req, queue); |
| |
| next_td = item; |
| len = 0; |
| for (j = 0; j < ci_req->dtd_count; j++) { |
| ci_invalidate_td(next_td); |
| item = next_td; |
| len += (item->info >> 16) & 0x7fff; |
| if (item->info & 0xff) |
| printf("EP%d/%s FAIL info=%x pg0=%x\n", |
| num, in ? "in" : "out", item->info, item->page0); |
| if (j != ci_req->dtd_count - 1) |
| next_td = (struct ept_queue_item *)(unsigned long) |
| item->next; |
| if (j != 0) |
| free(item); |
| } |
| |
| list_del_init(&ci_req->queue); |
| ci_ep->req_primed = false; |
| |
| if (!list_empty(&ci_ep->queue)) |
| ci_ep_submit_next_request(ci_ep); |
| |
| ci_req->req.actual = ci_req->req.length - len; |
| ci_debounce(ci_req, in); |
| |
| DBG("ept%d %s req %p, complete %x\n", |
| num, in ? "in" : "out", ci_req, len); |
| if (num != 0 || controller.ep0_data_phase) |
| ci_req->req.complete(&ci_ep->ep, &ci_req->req); |
| if (num == 0 && controller.ep0_data_phase) { |
| /* |
| * Data Stage is complete, so flip ep0 dir for Status Stage, |
| * which always transfers a packet in the opposite direction. |
| */ |
| DBG("%s: flip ep0 dir for Status Stage\n", __func__); |
| flip_ep0_direction(); |
| controller.ep0_data_phase = false; |
| ci_req->req.length = 0; |
| usb_ep_queue(&ci_ep->ep, &ci_req->req, 0); |
| } |
| } |
| |
| #define SETUP(type, request) (((type) << 8) | (request)) |
| |
| static void handle_setup(void) |
| { |
| struct ci_ep *ci_ep = &controller.ep[0]; |
| struct ci_req *ci_req; |
| struct usb_request *req; |
| struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor; |
| struct ept_queue_head *head; |
| struct usb_ctrlrequest r; |
| int status = 0; |
| int num, in, _num, _in, i; |
| char *buf; |
| |
| ci_req = controller.ep0_req; |
| req = &ci_req->req; |
| head = ci_get_qh(0, 0); /* EP0 OUT */ |
| |
| ci_invalidate_qh(0); |
| memcpy(&r, head->setup_data, sizeof(struct usb_ctrlrequest)); |
| #ifdef CONFIG_CI_UDC_HAS_HOSTPC |
| writel(EPT_RX(0), &udc->epsetupstat); |
| #else |
| writel(EPT_RX(0), &udc->epstat); |
| #endif |
| DBG("handle setup %s, %x, %x index %x value %x length %x\n", |
| reqname(r.bRequest), r.bRequestType, r.bRequest, r.wIndex, |
| r.wValue, r.wLength); |
| |
| /* Set EP0 dir for Data Stage based on Setup Stage data */ |
| if (r.bRequestType & USB_DIR_IN) { |
| DBG("%s: Set ep0 to IN for Data Stage\n", __func__); |
| ep0_desc.bEndpointAddress = USB_DIR_IN; |
| } else { |
| DBG("%s: Set ep0 to OUT for Data Stage\n", __func__); |
| ep0_desc.bEndpointAddress = 0; |
| } |
| if (r.wLength) { |
| controller.ep0_data_phase = true; |
| } else { |
| /* 0 length -> no Data Stage. Flip dir for Status Stage */ |
| DBG("%s: 0 length: flip ep0 dir for Status Stage\n", __func__); |
| flip_ep0_direction(); |
| controller.ep0_data_phase = false; |
| } |
| |
| list_del_init(&ci_req->queue); |
| ci_ep->req_primed = false; |
| |
| switch (SETUP(r.bRequestType, r.bRequest)) { |
| case SETUP(USB_RECIP_ENDPOINT, USB_REQ_CLEAR_FEATURE): |
| _num = r.wIndex & 15; |
| _in = !!(r.wIndex & 0x80); |
| |
| if ((r.wValue == 0) && (r.wLength == 0)) { |
| req->length = 0; |
| for (i = 0; i < NUM_ENDPOINTS; i++) { |
| struct ci_ep *ep = &controller.ep[i]; |
| |
| if (!ep->desc) |
| continue; |
| num = ep->desc->bEndpointAddress |
| & USB_ENDPOINT_NUMBER_MASK; |
| in = (ep->desc->bEndpointAddress |
| & USB_DIR_IN) != 0; |
| if ((num == _num) && (in == _in)) { |
| ep_enable(num, in, ep->ep.maxpacket); |
| usb_ep_queue(controller.gadget.ep0, |
| req, 0); |
| break; |
| } |
| } |
| } |
| return; |
| |
| case SETUP(USB_RECIP_DEVICE, USB_REQ_SET_ADDRESS): |
| /* |
| * write address delayed (will take effect |
| * after the next IN txn) |
| */ |
| writel((r.wValue << 25) | (1 << 24), &udc->devaddr); |
| req->length = 0; |
| usb_ep_queue(controller.gadget.ep0, req, 0); |
| return; |
| |
| case SETUP(USB_DIR_IN | USB_RECIP_DEVICE, USB_REQ_GET_STATUS): |
| req->length = 2; |
| buf = (char *)req->buf; |
| buf[0] = 1 << USB_DEVICE_SELF_POWERED; |
| buf[1] = 0; |
| usb_ep_queue(controller.gadget.ep0, req, 0); |
| return; |
| } |
| /* pass request up to the gadget driver */ |
| if (controller.driver) |
| status = controller.driver->setup(&controller.gadget, &r); |
| else |
| status = -ENODEV; |
| |
| if (!status) |
| return; |
| DBG("STALL reqname %s type %x value %x, index %x\n", |
| reqname(r.bRequest), r.bRequestType, r.wValue, r.wIndex); |
| writel((1<<16) | (1 << 0), &udc->epctrl[0]); |
| } |
| |
| static void stop_activity(void) |
| { |
| int i, num, in; |
| struct ept_queue_head *head; |
| struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor; |
| writel(readl(&udc->epcomp), &udc->epcomp); |
| #ifdef CONFIG_CI_UDC_HAS_HOSTPC |
| writel(readl(&udc->epsetupstat), &udc->epsetupstat); |
| #endif |
| writel(readl(&udc->epstat), &udc->epstat); |
| writel(0xffffffff, &udc->epflush); |
| |
| /* error out any pending reqs */ |
| for (i = 0; i < NUM_ENDPOINTS; i++) { |
| if (i != 0) |
| writel(0, &udc->epctrl[i]); |
| if (controller.ep[i].desc) { |
| num = controller.ep[i].desc->bEndpointAddress |
| & USB_ENDPOINT_NUMBER_MASK; |
| in = (controller.ep[i].desc->bEndpointAddress |
| & USB_DIR_IN) != 0; |
| head = ci_get_qh(num, in); |
| head->info = INFO_ACTIVE; |
| ci_flush_qh(num); |
| } |
| } |
| } |
| |
| void udc_irq(void) |
| { |
| struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor; |
| unsigned n = readl(&udc->usbsts); |
| writel(n, &udc->usbsts); |
| int bit, i, num, in; |
| |
| n &= (STS_SLI | STS_URI | STS_PCI | STS_UI | STS_UEI); |
| if (n == 0) |
| return; |
| |
| if (n & STS_URI) { |
| DBG("-- reset --\n"); |
| stop_activity(); |
| } |
| if (n & STS_SLI) |
| DBG("-- suspend --\n"); |
| |
| if (n & STS_PCI) { |
| int max = 64; |
| int speed = USB_SPEED_FULL; |
| |
| #ifdef CONFIG_CI_UDC_HAS_HOSTPC |
| bit = (readl(&udc->hostpc1_devlc) >> 25) & 3; |
| #else |
| bit = (readl(&udc->portsc) >> 26) & 3; |
| #endif |
| DBG("-- portchange %x %s\n", bit, (bit == 2) ? "High" : "Full"); |
| if (bit == 2) { |
| speed = USB_SPEED_HIGH; |
| max = 512; |
| } |
| controller.gadget.speed = speed; |
| for (i = 1; i < NUM_ENDPOINTS; i++) { |
| if (controller.ep[i].ep.maxpacket > max) |
| controller.ep[i].ep.maxpacket = max; |
| } |
| } |
| |
| if (n & STS_UEI) |
| printf("<UEI %x>\n", readl(&udc->epcomp)); |
| |
| if ((n & STS_UI) || (n & STS_UEI)) { |
| #ifdef CONFIG_CI_UDC_HAS_HOSTPC |
| n = readl(&udc->epsetupstat); |
| #else |
| n = readl(&udc->epstat); |
| #endif |
| if (n & EPT_RX(0)) |
| handle_setup(); |
| |
| n = readl(&udc->epcomp); |
| if (n != 0) |
| writel(n, &udc->epcomp); |
| |
| for (i = 0; i < NUM_ENDPOINTS && n; i++) { |
| if (controller.ep[i].desc) { |
| num = controller.ep[i].desc->bEndpointAddress |
| & USB_ENDPOINT_NUMBER_MASK; |
| in = (controller.ep[i].desc->bEndpointAddress |
| & USB_DIR_IN) != 0; |
| bit = (in) ? EPT_TX(num) : EPT_RX(num); |
| if (n & bit) |
| handle_ep_complete(&controller.ep[i]); |
| } |
| } |
| } |
| } |
| |
| int usb_gadget_handle_interrupts(int index) |
| { |
| u32 value; |
| struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor; |
| |
| value = readl(&udc->usbsts); |
| if (value) |
| udc_irq(); |
| |
| return value; |
| } |
| |
| void udc_disconnect(void) |
| { |
| struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor; |
| /* disable pullup */ |
| stop_activity(); |
| writel(USBCMD_FS2, &udc->usbcmd); |
| udelay(800); |
| if (controller.driver) |
| controller.driver->disconnect(&controller.gadget); |
| } |
| |
| static int ci_pullup(struct usb_gadget *gadget, int is_on) |
| { |
| struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor; |
| if (is_on) { |
| /* RESET */ |
| writel(USBCMD_ITC(MICRO_8FRAME) | USBCMD_RST, &udc->usbcmd); |
| udelay(200); |
| |
| ci_init_after_reset(controller.ctrl); |
| |
| writel((unsigned long)controller.epts, &udc->epinitaddr); |
| |
| /* select DEVICE mode */ |
| writel(USBMODE_DEVICE, &udc->usbmode); |
| |
| #if !defined(CONFIG_USB_GADGET_DUALSPEED) |
| /* Port force Full-Speed Connect */ |
| setbits_le32(&udc->portsc, PFSC); |
| #endif |
| |
| writel(0xffffffff, &udc->epflush); |
| |
| /* Turn on the USB connection by enabling the pullup resistor */ |
| setbits_le32(&udc->usbcmd, USBCMD_ITC(MICRO_8FRAME) | |
| USBCMD_RUN); |
| } else { |
| udc_disconnect(); |
| } |
| |
| return 0; |
| } |
| |
| static int ci_udc_probe(void) |
| { |
| struct ept_queue_head *head; |
| int i; |
| |
| const int num = 2 * NUM_ENDPOINTS; |
| |
| const int eplist_min_align = 4096; |
| const int eplist_align = roundup(eplist_min_align, ARCH_DMA_MINALIGN); |
| const int eplist_raw_sz = num * sizeof(struct ept_queue_head); |
| const int eplist_sz = roundup(eplist_raw_sz, ARCH_DMA_MINALIGN); |
| |
| /* The QH list must be aligned to 4096 bytes. */ |
| controller.epts = memalign(eplist_align, eplist_sz); |
| if (!controller.epts) |
| return -ENOMEM; |
| memset(controller.epts, 0, eplist_sz); |
| |
| controller.items_mem = memalign(ILIST_ALIGN, ILIST_SZ); |
| if (!controller.items_mem) { |
| free(controller.epts); |
| return -ENOMEM; |
| } |
| memset(controller.items_mem, 0, ILIST_SZ); |
| |
| for (i = 0; i < 2 * NUM_ENDPOINTS; i++) { |
| /* |
| * Configure QH for each endpoint. The structure of the QH list |
| * is such that each two subsequent fields, N and N+1 where N is |
| * even, in the QH list represent QH for one endpoint. The Nth |
| * entry represents OUT configuration and the N+1th entry does |
| * represent IN configuration of the endpoint. |
| */ |
| head = controller.epts + i; |
| if (i < 2) |
| head->config = CONFIG_MAX_PKT(EP0_MAX_PACKET_SIZE) |
| | CONFIG_ZLT | CONFIG_IOS; |
| else |
| head->config = CONFIG_MAX_PKT(EP_MAX_PACKET_SIZE) |
| | CONFIG_ZLT; |
| head->next = TERMINATE; |
| head->info = 0; |
| |
| if (i & 1) { |
| ci_flush_qh(i / 2); |
| ci_flush_qtd(i / 2); |
| } |
| } |
| |
| INIT_LIST_HEAD(&controller.gadget.ep_list); |
| |
| /* Init EP 0 */ |
| memcpy(&controller.ep[0].ep, &ci_ep_init[0], sizeof(*ci_ep_init)); |
| controller.ep[0].desc = &ep0_desc; |
| INIT_LIST_HEAD(&controller.ep[0].queue); |
| controller.ep[0].req_primed = false; |
| controller.gadget.ep0 = &controller.ep[0].ep; |
| INIT_LIST_HEAD(&controller.gadget.ep0->ep_list); |
| |
| /* Init EP 1..3 */ |
| for (i = 1; i < 4; i++) { |
| memcpy(&controller.ep[i].ep, &ci_ep_init[i], |
| sizeof(*ci_ep_init)); |
| INIT_LIST_HEAD(&controller.ep[i].queue); |
| controller.ep[i].req_primed = false; |
| list_add_tail(&controller.ep[i].ep.ep_list, |
| &controller.gadget.ep_list); |
| } |
| |
| /* Init EP 4..n */ |
| for (i = 4; i < NUM_ENDPOINTS; i++) { |
| memcpy(&controller.ep[i].ep, &ci_ep_init[4], |
| sizeof(*ci_ep_init)); |
| INIT_LIST_HEAD(&controller.ep[i].queue); |
| controller.ep[i].req_primed = false; |
| list_add_tail(&controller.ep[i].ep.ep_list, |
| &controller.gadget.ep_list); |
| } |
| |
| ci_ep_alloc_request(&controller.ep[0].ep, 0); |
| if (!controller.ep0_req) { |
| free(controller.items_mem); |
| free(controller.epts); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| int usb_gadget_register_driver(struct usb_gadget_driver *driver) |
| { |
| int ret; |
| |
| if (!driver) |
| return -EINVAL; |
| if (!driver->bind || !driver->setup || !driver->disconnect) |
| return -EINVAL; |
| if (driver->speed != USB_SPEED_FULL && driver->speed != USB_SPEED_HIGH) |
| return -EINVAL; |
| |
| #if CONFIG_IS_ENABLED(DM_USB) |
| ret = usb_setup_ehci_gadget(&controller.ctrl); |
| #else |
| ret = usb_lowlevel_init(0, USB_INIT_DEVICE, (void **)&controller.ctrl); |
| #endif |
| if (ret) |
| return ret; |
| |
| ret = ci_udc_probe(); |
| if (ret) { |
| DBG("udc probe failed, returned %d\n", ret); |
| return ret; |
| } |
| |
| ret = driver->bind(&controller.gadget); |
| if (ret) { |
| DBG("driver->bind() returned %d\n", ret); |
| return ret; |
| } |
| controller.driver = driver; |
| |
| return 0; |
| } |
| |
| int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) |
| { |
| udc_disconnect(); |
| |
| driver->unbind(&controller.gadget); |
| controller.driver = NULL; |
| |
| ci_ep_free_request(&controller.ep[0].ep, &controller.ep0_req->req); |
| free(controller.items_mem); |
| free(controller.epts); |
| |
| return 0; |
| } |
| |
| bool dfu_usb_get_reset(void) |
| { |
| struct ci_udc *udc = (struct ci_udc *)controller.ctrl->hcor; |
| |
| return !!(readl(&udc->usbsts) & STS_URI); |
| } |