| /* |
| * (C) Copyright 2006-2008 |
| * Texas Instruments. |
| * Author : |
| * Manikandan Pillai <mani.pillai@ti.com> |
| * Derived from Beagle Board and 3430 SDP code by |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * Syed Mohammed Khasim <khasim@ti.com> |
| * |
| * Manikandan Pillai <mani.pillai@ti.com> |
| * |
| * Configuration settings for the TI OMAP3 EVM board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| */ |
| #define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ |
| #define CONFIG_OMAP 1 /* in a TI OMAP core */ |
| #define CONFIG_OMAP34XX 1 /* which is a 34XX */ |
| #define CONFIG_OMAP3430 1 /* which is in a 3430 */ |
| #define CONFIG_OMAP3_EVM 1 /* working with EVM */ |
| |
| #define CONFIG_SDRC /* The chip has SDRC controller */ |
| |
| #include <asm/arch/cpu.h> /* get chip and board defs */ |
| #include <asm/arch/omap3.h> |
| |
| /* |
| * Display CPU and Board information |
| */ |
| #define CONFIG_DISPLAY_CPUINFO 1 |
| #define CONFIG_DISPLAY_BOARDINFO 1 |
| |
| /* Clock Defines */ |
| #define V_OSCK 26000000 /* Clock output from T2 */ |
| #define V_SCLK (V_OSCK >> 1) |
| |
| #undef CONFIG_USE_IRQ /* no support for IRQs */ |
| #define CONFIG_MISC_INIT_R |
| |
| #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ |
| #define CONFIG_SETUP_MEMORY_TAGS 1 |
| #define CONFIG_INITRD_TAG 1 |
| #define CONFIG_REVISION_TAG 1 |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ |
| /* Sector */ |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) |
| /* initial data */ |
| /* |
| * Hardware drivers |
| */ |
| |
| /* |
| * NS16550 Configuration |
| */ |
| #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ |
| |
| #define CONFIG_SYS_NS16550 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE (-4) |
| #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK |
| |
| /* |
| * select serial console configuration |
| */ |
| #define CONFIG_CONS_INDEX 1 |
| #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 |
| #define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ |
| 115200} |
| #define CONFIG_MMC 1 |
| #define CONFIG_OMAP3_MMC 1 |
| #define CONFIG_DOS_PARTITION 1 |
| |
| /* DDR - I use Micron DDR */ |
| #define CONFIG_OMAP3_MICRON_DDR 1 |
| |
| /* USB |
| * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard |
| * Enable CONFIG_MUSB_UDD for Device functionalities. |
| */ |
| #define CONFIG_USB_OMAP3 1 |
| #define CONFIG_MUSB_HCD 1 |
| /* #define CONFIG_MUSB_UDC 1 */ |
| |
| #ifdef CONFIG_USB_OMAP3 |
| |
| #ifdef CONFIG_MUSB_HCD |
| #define CONFIG_CMD_USB |
| |
| #define CONFIG_USB_STORAGE |
| #define CONGIG_CMD_STORAGE |
| #define CONFIG_CMD_FAT |
| |
| #ifdef CONFIG_USB_KEYBOARD |
| #define CONFIG_SYS_USB_EVENT_POLL |
| #define CONFIG_PREBOOT "usb start" |
| #endif /* CONFIG_USB_KEYBOARD */ |
| |
| #endif /* CONFIG_MUSB_HCD */ |
| |
| #ifdef CONFIG_MUSB_UDC |
| /* USB device configuration */ |
| #define CONFIG_USB_DEVICE 1 |
| #define CONFIG_USB_TTY 1 |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 |
| /* Change these to suit your needs */ |
| #define CONFIG_USBD_VENDORID 0x0451 |
| #define CONFIG_USBD_PRODUCTID 0x5678 |
| #define CONFIG_USBD_MANUFACTURER "Texas Instruments" |
| #define CONFIG_USBD_PRODUCT_NAME "EVM" |
| #endif /* CONFIG_MUSB_UDC */ |
| |
| #endif /* CONFIG_USB_OMAP3 */ |
| |
| /* commands to include */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_EXT2 /* EXT2 Support */ |
| #define CONFIG_CMD_FAT /* FAT support */ |
| #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ |
| |
| #define CONFIG_CMD_I2C /* I2C serial bus support */ |
| #define CONFIG_CMD_MMC /* MMC support */ |
| #define CONFIG_CMD_NAND /* NAND support */ |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_PING |
| |
| #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ |
| #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ |
| #undef CONFIG_CMD_IMI /* iminfo */ |
| #undef CONFIG_CMD_IMLS /* List all found images */ |
| |
| #define CONFIG_SYS_NO_FLASH |
| #define CONFIG_HARD_I2C 1 |
| #define CONFIG_SYS_I2C_SPEED 100000 |
| #define CONFIG_SYS_I2C_SLAVE 1 |
| #define CONFIG_SYS_I2C_BUS 0 |
| #define CONFIG_SYS_I2C_BUS_SELECT 1 |
| #define CONFIG_DRIVER_OMAP34XX_I2C 1 |
| |
| /* |
| * TWL4030 |
| */ |
| #define CONFIG_TWL4030_POWER 1 |
| |
| /* |
| * Board NAND Info. |
| */ |
| #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ |
| /* to access nand */ |
| #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ |
| /* to access */ |
| /* nand at CS0 */ |
| |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ |
| /* NAND devices */ |
| #define CONFIG_JFFS2_NAND |
| /* nand device jffs2 lives on */ |
| #define CONFIG_JFFS2_DEV "nand0" |
| /* start of jffs2 partition */ |
| #define CONFIG_JFFS2_PART_OFFSET 0x680000 |
| #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ |
| |
| /* Environment information */ |
| #define CONFIG_BOOTDELAY 10 |
| |
| #define CONFIG_BOOTFILE uImage |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "loadaddr=0x82000000\0" \ |
| "usbtty=cdc_acm\0" \ |
| "console=ttyS2,115200n8\0" \ |
| "mmcargs=setenv bootargs console=${console} " \ |
| "root=/dev/mmcblk0p2 rw " \ |
| "rootfstype=ext3 rootwait\0" \ |
| "nandargs=setenv bootargs console=${console} " \ |
| "root=/dev/mtdblock4 rw " \ |
| "rootfstype=jffs2\0" \ |
| "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ |
| "bootscript=echo Running bootscript from mmc ...; " \ |
| "source ${loadaddr}\0" \ |
| "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ |
| "mmcboot=echo Booting from mmc ...; " \ |
| "run mmcargs; " \ |
| "bootm ${loadaddr}\0" \ |
| "nandboot=echo Booting from nand ...; " \ |
| "run nandargs; " \ |
| "onenand read ${loadaddr} 280000 400000; " \ |
| "bootm ${loadaddr}\0" \ |
| |
| #define CONFIG_BOOTCOMMAND \ |
| "if mmc init; then " \ |
| "if run loadbootscript; then " \ |
| "run bootscript; " \ |
| "else " \ |
| "if run loaduimage; then " \ |
| "run mmcboot; " \ |
| "else run nandboot; " \ |
| "fi; " \ |
| "fi; " \ |
| "else run nandboot; fi" |
| |
| #define CONFIG_AUTO_COMPLETE 1 |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ |
| #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| #define CONFIG_SYS_PROMPT "OMAP3_EVM # " |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ |
| sizeof(CONFIG_SYS_PROMPT) + 16) |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command */ |
| /* args */ |
| /* Boot Argument Buffer Size */ |
| #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) |
| /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) |
| #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ |
| 0x01F00000) /* 31MB */ |
| |
| #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ |
| /* address */ |
| |
| /* |
| * OMAP3 has 12 GP timers, they can be driven by the system clock |
| * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). |
| * This rate is divided by a local divisor. |
| */ |
| #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 |
| #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ |
| #define CONFIG_SYS_HZ 1000 |
| |
| /*----------------------------------------------------------------------- |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ |
| #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ |
| #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 |
| #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ |
| #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 |
| |
| /* SDRAM Bank Allocation method */ |
| #define SDRC_R_B_C 1 |
| |
| /*----------------------------------------------------------------------- |
| * FLASH and environment organization |
| */ |
| |
| /* **** PISMO SUPPORT *** */ |
| |
| /* Configure the PISMO */ |
| #define PISMO1_NAND_SIZE GPMC_SIZE_128M |
| #define PISMO1_ONEN_SIZE GPMC_SIZE_128M |
| |
| #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ |
| |
| #if defined(CONFIG_CMD_NAND) |
| #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE |
| #elif defined(CONFIG_CMD_ONENAND) |
| #define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE |
| #endif |
| |
| /* Monitor at start of flash */ |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP |
| |
| #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ |
| #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ |
| |
| #if defined(CONFIG_CMD_NAND) |
| #define CONFIG_NAND_OMAP_GPMC |
| #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 |
| #define CONFIG_ENV_IS_IN_NAND |
| #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET |
| #elif defined(CONFIG_CMD_ONENAND) |
| #define CONFIG_ENV_IS_IN_ONENAND 1 |
| #define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET |
| #endif |
| |
| #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ |
| #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET |
| |
| /* |
| * Support for relocation |
| */ |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
| #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x800 |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ |
| CONFIG_SYS_INIT_RAM_SIZE - \ |
| GENERATED_GBL_DATA_SIZE) |
| |
| /* |
| * Define the board revision statically |
| */ |
| /* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ |
| |
| /*---------------------------------------------------------------------------- |
| * SMSC9115 Ethernet from SMSC9118 family |
| *---------------------------------------------------------------------------- |
| */ |
| #if defined(CONFIG_CMD_NET) |
| |
| #define CONFIG_NET_MULTI |
| #define CONFIG_SMC911X |
| #define CONFIG_SMC911X_32_BIT |
| #define CONFIG_SMC911X_BASE 0x2C000000 |
| |
| #endif /* (CONFIG_CMD_NET) */ |
| |
| /* |
| * BOOTP fields |
| */ |
| |
| #define CONFIG_BOOTP_SUBNETMASK 0x00000001 |
| #define CONFIG_BOOTP_GATEWAY 0x00000002 |
| #define CONFIG_BOOTP_HOSTNAME 0x00000004 |
| #define CONFIG_BOOTP_BOOTPATH 0x00000010 |
| |
| #endif /* __CONFIG_H */ |