| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2015 Marek Vasut <marex@denx.de> |
| * |
| * DesignWare APB GPIO driver |
| */ |
| |
| #include <common.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <dm.h> |
| #include <dm/device-internal.h> |
| #include <dm/device_compat.h> |
| #include <dm/devres.h> |
| #include <dm/lists.h> |
| #include <dm/root.h> |
| #include <errno.h> |
| #include <reset.h> |
| #include <linux/bitops.h> |
| |
| #define GPIO_SWPORT_DR(p) (0x00 + (p) * 0xc) |
| #define GPIO_SWPORT_DDR(p) (0x04 + (p) * 0xc) |
| #define GPIO_INTEN 0x30 |
| #define GPIO_INTMASK 0x34 |
| #define GPIO_INTTYPE_LEVEL 0x38 |
| #define GPIO_INT_POLARITY 0x3c |
| #define GPIO_INTSTATUS 0x40 |
| #define GPIO_PORTA_DEBOUNCE 0x48 |
| #define GPIO_PORTA_EOI 0x4c |
| #define GPIO_EXT_PORT(p) (0x50 + (p) * 4) |
| |
| struct gpio_dwapb_priv { |
| struct reset_ctl_bulk resets; |
| }; |
| |
| struct gpio_dwapb_plat { |
| const char *name; |
| int bank; |
| int pins; |
| void __iomem *base; |
| }; |
| |
| static int dwapb_gpio_direction_input(struct udevice *dev, unsigned pin) |
| { |
| struct gpio_dwapb_plat *plat = dev_get_plat(dev); |
| |
| clrbits_le32(plat->base + GPIO_SWPORT_DDR(plat->bank), 1 << pin); |
| return 0; |
| } |
| |
| static int dwapb_gpio_direction_output(struct udevice *dev, unsigned pin, |
| int val) |
| { |
| struct gpio_dwapb_plat *plat = dev_get_plat(dev); |
| |
| setbits_le32(plat->base + GPIO_SWPORT_DDR(plat->bank), 1 << pin); |
| |
| if (val) |
| setbits_le32(plat->base + GPIO_SWPORT_DR(plat->bank), 1 << pin); |
| else |
| clrbits_le32(plat->base + GPIO_SWPORT_DR(plat->bank), 1 << pin); |
| |
| return 0; |
| } |
| |
| static int dwapb_gpio_set_value(struct udevice *dev, unsigned pin, int val) |
| { |
| struct gpio_dwapb_plat *plat = dev_get_plat(dev); |
| |
| if (val) |
| setbits_le32(plat->base + GPIO_SWPORT_DR(plat->bank), 1 << pin); |
| else |
| clrbits_le32(plat->base + GPIO_SWPORT_DR(plat->bank), 1 << pin); |
| |
| return 0; |
| } |
| |
| static int dwapb_gpio_get_function(struct udevice *dev, unsigned offset) |
| { |
| struct gpio_dwapb_plat *plat = dev_get_plat(dev); |
| u32 gpio; |
| |
| gpio = readl(plat->base + GPIO_SWPORT_DDR(plat->bank)); |
| |
| if (gpio & BIT(offset)) |
| return GPIOF_OUTPUT; |
| else |
| return GPIOF_INPUT; |
| } |
| |
| static int dwapb_gpio_get_value(struct udevice *dev, unsigned pin) |
| { |
| struct gpio_dwapb_plat *plat = dev_get_plat(dev); |
| u32 value; |
| |
| if (dwapb_gpio_get_function(dev, pin) == GPIOF_OUTPUT) |
| value = readl(plat->base + GPIO_SWPORT_DR(plat->bank)); |
| else |
| value = readl(plat->base + GPIO_EXT_PORT(plat->bank)); |
| return !!(value & BIT(pin)); |
| } |
| |
| static const struct dm_gpio_ops gpio_dwapb_ops = { |
| .direction_input = dwapb_gpio_direction_input, |
| .direction_output = dwapb_gpio_direction_output, |
| .get_value = dwapb_gpio_get_value, |
| .set_value = dwapb_gpio_set_value, |
| .get_function = dwapb_gpio_get_function, |
| }; |
| |
| static int gpio_dwapb_reset(struct udevice *dev) |
| { |
| int ret; |
| struct gpio_dwapb_priv *priv = dev_get_priv(dev); |
| |
| ret = reset_get_bulk(dev, &priv->resets); |
| if (ret) { |
| /* Return 0 if error due to !CONFIG_DM_RESET and reset |
| * DT property is not present. |
| */ |
| if (ret == -ENOENT || ret == -ENOTSUPP) |
| return 0; |
| |
| dev_warn(dev, "Can't get reset: %d\n", ret); |
| return ret; |
| } |
| |
| ret = reset_deassert_bulk(&priv->resets); |
| if (ret) { |
| reset_release_bulk(&priv->resets); |
| dev_err(dev, "Failed to reset: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int gpio_dwapb_probe(struct udevice *dev) |
| { |
| struct gpio_dev_priv *priv = dev_get_uclass_priv(dev); |
| struct gpio_dwapb_plat *plat = dev_get_plat(dev); |
| |
| if (!plat) { |
| /* Reset on parent device only */ |
| return gpio_dwapb_reset(dev); |
| } |
| |
| priv->gpio_count = plat->pins; |
| priv->bank_name = plat->name; |
| |
| return 0; |
| } |
| |
| static int gpio_dwapb_bind(struct udevice *dev) |
| { |
| struct gpio_dwapb_plat *plat = dev_get_plat(dev); |
| struct udevice *subdev; |
| fdt_addr_t base; |
| int ret, bank = 0; |
| ofnode node; |
| |
| /* If this is a child device, there is nothing to do here */ |
| if (plat) |
| return 0; |
| |
| base = dev_read_addr(dev); |
| if (base == FDT_ADDR_T_NONE) { |
| debug("Can't get the GPIO register base address\n"); |
| return -ENXIO; |
| } |
| |
| for (node = dev_read_first_subnode(dev); ofnode_valid(node); |
| node = dev_read_next_subnode(node)) { |
| if (!ofnode_read_bool(node, "gpio-controller")) |
| continue; |
| |
| plat = devm_kcalloc(dev, 1, sizeof(*plat), GFP_KERNEL); |
| if (!plat) |
| return -ENOMEM; |
| |
| plat->base = (void *)base; |
| plat->bank = bank; |
| plat->pins = ofnode_read_u32_default(node, "snps,nr-gpios", 0); |
| |
| if (ofnode_read_string_index(node, "bank-name", 0, |
| &plat->name)) { |
| /* |
| * Fall back to node name. This means accessing pins |
| * via bank name won't work. |
| */ |
| char name[32]; |
| |
| snprintf(name, sizeof(name), "%s_", |
| ofnode_get_name(node)); |
| plat->name = strdup(name); |
| if (!plat->name) { |
| kfree(plat); |
| return -ENOMEM; |
| } |
| } |
| |
| ret = device_bind(dev, dev->driver, plat->name, plat, node, |
| &subdev); |
| if (ret) |
| return ret; |
| |
| bank++; |
| } |
| |
| return 0; |
| } |
| |
| static int gpio_dwapb_remove(struct udevice *dev) |
| { |
| struct gpio_dwapb_plat *plat = dev_get_plat(dev); |
| struct gpio_dwapb_priv *priv = dev_get_priv(dev); |
| |
| if (!plat && priv) |
| return reset_release_bulk(&priv->resets); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id gpio_dwapb_ids[] = { |
| { .compatible = "snps,dw-apb-gpio" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(gpio_dwapb) = { |
| .name = "gpio-dwapb", |
| .id = UCLASS_GPIO, |
| .of_match = gpio_dwapb_ids, |
| .ops = &gpio_dwapb_ops, |
| .bind = gpio_dwapb_bind, |
| .probe = gpio_dwapb_probe, |
| .remove = gpio_dwapb_remove, |
| .priv_auto = sizeof(struct gpio_dwapb_priv), |
| }; |