* Code cleanup
* Patch by Sascha Hauer, 28 Jun:
- add generic support for Motorola i.MX architecture
- add support for mx1ads, mx1fs2 and scb9328 boards
* Patches by Marc Leeman, 23 Jul 2004:
- Add define for the PCI/Memory Buffer Configuration Register
- corrected comments in cpu/mpc824x/cpu_init.c
* Add support for multiple serial interfaces
(for example to allow modem dial-in / dial-out)
diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c
new file mode 100644
index 0000000..1b56f8c
--- /dev/null
+++ b/board/scb9328/flash.c
@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This code was inspired by Marius Groeger and Kyle Harris code
+ * available in other board ports for U-Boot
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ */
+
+#include <common.h>
+#include "intel.h"
+
+
+/*
+ * This code should handle CFI FLASH memory device. This code is very
+ * minimalistic approach without many essential error handling code as well.
+ * Because U-Boot actually is missing smart handling of FLASH device,
+ * we just set flash_id to anything else to FLASH_UNKNOW, so common code
+ * can call us without any restrictions.
+ * TODO: Add CFI Query, to be able to determine FLASH device.
+ * TODO: Add error handling code
+ * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
+ * hopefully may work with other configurations.
+ */
+
+#if ( SCB9328_FLASH_BUS_WIDTH == 1 )
+# define FLASH_BUS vu_char
+# if ( SCB9328_FLASH_INTERLEAVE == 1 )
+# define FLASH_CMD( x ) x
+# else
+# error "With 8bit bus only one chip is allowed"
+# endif
+
+
+#elif ( SCB9328_FLASH_BUS_WIDTH == 2 )
+# define FLASH_BUS vu_short
+# if ( SCB9328_FLASH_INTERLEAVE == 1 )
+# define FLASH_CMD( x ) x
+# elif ( SCB9328_FLASH_INTERLEAVE == 2 )
+# define FLASH_CMD( x ) (( x << 8 )| x )
+# else
+# error "With 16bit bus only 1 or 2 chip(s) are allowed"
+# endif
+
+
+#elif ( SCB9328_FLASH_BUS_WIDTH == 4 )
+# define FLASH_BUS vu_long
+# if ( SCB9328_FLASH_INTERLEAVE == 1 )
+# define FLASH_CMD( x ) x
+# elif ( SCB9328_FLASH_INTERLEAVE == 2 )
+# define FLASH_CMD( x ) (( x << 16 )| x )
+# elif ( SCB9328_FLASH_INTERLEAVE == 4 )
+# define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
+# else
+# error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
+# endif
+
+#else
+# error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
+#endif
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+static FLASH_BUS flash_status_reg (void)
+{
+
+ FLASH_BUS *addr = (FLASH_BUS *) 0;
+
+ *addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
+
+ return *addr;
+}
+
+static int flash_ready (ulong timeout)
+{
+ int ok = 1;
+
+ reset_timer_masked ();
+ while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) !=
+ FLASH_CMD (CFI_INTEL_SR_READY)) {
+ if (get_timer_masked () > timeout && timeout != 0) {
+ ok = 0;
+ break;
+ }
+ }
+ return ok;
+}
+
+#if ( CFG_MAX_FLASH_BANKS != 1 )
+# error "SCB9328 platform has only one flash bank!"
+#endif
+
+
+ulong flash_init (void)
+{
+ int i;
+ unsigned long address = SCB9328_FLASH_BASE;
+
+ flash_info[0].size = SCB9328_FLASH_BANK_SIZE;
+ flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
+ flash_info[0].flash_id = INTEL_MANUFACT;
+ memset (flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+
+ for (i = 0; i < CFG_MAX_FLASH_SECT; i++) {
+ flash_info[0].start[i] = address;
+#ifdef SCB9328_FLASH_UNLOCK
+ /* Some devices are hw locked after start. */
+ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP);
+ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK);
+ flash_ready (0);
+ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+#endif
+ address += SCB9328_FLASH_SECT_SIZE;
+ }
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ return SCB9328_FLASH_BANK_SIZE;
+}
+
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ printf (" Intel vendor\n");
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if (!(i % 5)) {
+ printf ("\n");
+ }
+
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+}
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int flag, non_protected = 0, sector;
+ int rc = ERR_OK;
+
+ FLASH_BUS *address;
+
+ for (sector = s_first; sector <= s_last; sector++) {
+ if (!info->protect[sector]) {
+ non_protected++;
+ }
+ }
+
+ if (!non_protected) {
+ return ERR_PROTECTED;
+ }
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ flag = disable_interrupts ();
+
+
+ /* Start erase on unprotected sectors */
+ for (sector = s_first; sector <= s_last && !ctrlc (); sector++) {
+ if (info->protect[sector]) {
+ printf ("Protected sector %2d skipping...\n", sector);
+ continue;
+ } else {
+ printf ("Erasing sector %2d ... ", sector);
+ }
+
+ address = (FLASH_BUS *) (info->start[sector]);
+
+ *address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
+ *address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
+ if (flash_ready (CFG_FLASH_ERASE_TOUT)) {
+ *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+ printf ("ok.\n");
+ } else {
+ *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+ rc = ERR_TIMOUT;
+ printf ("timeout! Aborting...\n");
+ break;
+ }
+ *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+ }
+ if (ctrlc ())
+ printf ("User Interrupt!\n");
+
+ /* allow flash to settle - wait 10 ms */
+ udelay_masked (10000);
+ if (flag) {
+ enable_interrupts ();
+ }
+
+ return rc;
+}
+
+static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
+{
+ FLASH_BUS *address = (FLASH_BUS *) dest;
+ int rc = ERR_OK;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*address & data) != data) {
+ return ERR_NOT_ERASED;
+ }
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+
+ flag = disable_interrupts ();
+
+ *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+ *address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
+ *address = data;
+
+ if (!flash_ready (CFG_FLASH_WRITE_TOUT)) {
+ *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+ rc = ERR_TIMOUT;
+ printf ("timeout! Aborting...\n");
+ }
+
+ *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+ if (flag) {
+ enable_interrupts ();
+ }
+
+ return rc;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong read_addr, write_addr;
+ FLASH_BUS data;
+ int i, result = ERR_OK;
+
+
+ read_addr = addr & ~(sizeof (FLASH_BUS) - 1);
+ write_addr = read_addr;
+ if (read_addr != addr) {
+ data = 0;
+ for (i = 0; i < sizeof (FLASH_BUS); i++) {
+ if (read_addr < addr || cnt == 0) {
+ data |= *((uchar *) read_addr) << i * 8;
+ } else {
+ data |= (*src++) << i * 8;
+ cnt--;
+ }
+ read_addr++;
+ }
+ if ((result = write_data (info, write_addr, data)) != ERR_OK) {
+ return result;
+ }
+ write_addr += sizeof (FLASH_BUS);
+ }
+ for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) {
+ if ((result = write_data (info, write_addr,
+ *((FLASH_BUS *) src))) != ERR_OK) {
+ return result;
+ }
+ write_addr += sizeof (FLASH_BUS);
+ src += sizeof (FLASH_BUS);
+ }
+ if (cnt > 0) {
+ read_addr = write_addr;
+ data = 0;
+ for (i = 0; i < sizeof (FLASH_BUS); i++) {
+ if (cnt > 0) {
+ data |= (*src++) << i * 8;
+ cnt--;
+ } else {
+ data |= *((uchar *) read_addr) << i * 8;
+ }
+ read_addr++;
+ }
+ if ((result = write_data (info, write_addr, data)) != 0) {
+ return result;
+ }
+ }
+ return ERR_OK;
+}