| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2000-2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| */ |
| |
| #include <common.h> |
| #include <flash.h> |
| #include <init.h> |
| #include <irq_func.h> |
| |
| #include <asm/immap.h> |
| |
| #ifndef CONFIG_SYS_FLASH_CFI |
| typedef unsigned short FLASH_PORT_WIDTH; |
| typedef volatile unsigned short FLASH_PORT_WIDTHV; |
| |
| #define FPW FLASH_PORT_WIDTH |
| #define FPWV FLASH_PORT_WIDTHV |
| |
| #define FLASH_CYCLE1 0x5555 |
| #define FLASH_CYCLE2 0x2aaa |
| |
| #define SYNC __asm__("nop") |
| |
| /*----------------------------------------------------------------------- |
| * Functions |
| */ |
| |
| ulong flash_get_size(FPWV * addr, flash_info_t * info); |
| int flash_get_offsets(ulong base, flash_info_t * info); |
| int write_word(flash_info_t * info, FPWV * dest, u16 data); |
| static inline void spin_wheel(void); |
| |
| flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; |
| |
| ulong flash_init(void) |
| { |
| ulong size = 0; |
| ulong fbase = 0; |
| |
| fbase = (ulong) CONFIG_SYS_FLASH_BASE; |
| flash_get_size((FPWV *) fbase, &flash_info[0]); |
| flash_get_offsets((ulong) fbase, &flash_info[0]); |
| fbase += flash_info[0].size; |
| size += flash_info[0].size; |
| |
| /* Protect monitor and environment sectors */ |
| flash_protect(FLAG_PROTECT_SET, |
| CONFIG_SYS_MONITOR_BASE, |
| CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); |
| |
| return size; |
| } |
| |
| int flash_get_offsets(ulong base, flash_info_t * info) |
| { |
| int i; |
| |
| if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { |
| |
| info->start[0] = base; |
| info->protect[0] = 0; |
| for (i = 1; i < CONFIG_SYS_SST_SECT; i++) { |
| info->start[i] = info->start[i - 1] |
| + CONFIG_SYS_SST_SECTSZ; |
| info->protect[i] = 0; |
| } |
| } |
| |
| return ERR_OK; |
| } |
| |
| void flash_print_info(flash_info_t * info) |
| { |
| int i; |
| |
| switch (info->flash_id & FLASH_VENDMASK) { |
| case FLASH_MAN_SST: |
| printf("SST "); |
| break; |
| default: |
| printf("Unknown Vendor "); |
| break; |
| } |
| |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_SST6401B: |
| printf("SST39VF6401B\n"); |
| break; |
| default: |
| printf("Unknown Chip Type\n"); |
| return; |
| } |
| |
| if (info->size > 0x100000) { |
| int remainder; |
| |
| printf(" Size: %ld", info->size >> 20); |
| |
| remainder = (info->size % 0x100000); |
| if (remainder) { |
| remainder >>= 10; |
| remainder = (int)((float) |
| (((float)remainder / (float)1024) * |
| 10000)); |
| printf(".%d ", remainder); |
| } |
| |
| printf("MB in %d Sectors\n", info->sector_count); |
| } else |
| printf(" Size: %ld KB in %d Sectors\n", |
| info->size >> 10, info->sector_count); |
| |
| printf(" Sector Start Addresses:"); |
| for (i = 0; i < info->sector_count; ++i) { |
| if ((i % 5) == 0) |
| printf("\n "); |
| printf(" %08lX%s", |
| info->start[i], info->protect[i] ? " (RO)" : " "); |
| } |
| printf("\n"); |
| } |
| |
| /* |
| * The following code cannot be run from FLASH! |
| */ |
| ulong flash_get_size(FPWV * addr, flash_info_t * info) |
| { |
| u16 value; |
| |
| addr[FLASH_CYCLE1] = (FPWV) 0x00AA00AA; /* for Atmel, Intel ignores this */ |
| addr[FLASH_CYCLE2] = (FPWV) 0x00550055; /* for Atmel, Intel ignores this */ |
| addr[FLASH_CYCLE1] = (FPWV) 0x00900090; /* selects Intel or Atmel */ |
| |
| switch (addr[0] & 0xffff) { |
| case (u8) SST_MANUFACT: |
| info->flash_id = FLASH_MAN_SST; |
| value = addr[1]; |
| break; |
| default: |
| printf("Unknown Flash\n"); |
| info->flash_id = FLASH_UNKNOWN; |
| info->sector_count = 0; |
| info->size = 0; |
| |
| *addr = (FPW) 0x00F000F0; |
| return (0); /* no or unknown flash */ |
| } |
| |
| switch (value) { |
| case (u16) SST_ID_xF6401B: |
| info->flash_id += FLASH_SST6401B; |
| break; |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| break; |
| } |
| |
| info->sector_count = 0; |
| info->size = 0; |
| info->sector_count = CONFIG_SYS_SST_SECT; |
| info->size = CONFIG_SYS_SST_SECT * CONFIG_SYS_SST_SECTSZ; |
| |
| /* reset ID mode */ |
| *addr = (FPWV) 0x00F000F0; |
| |
| if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { |
| printf("** ERROR: sector count %d > max (%d) **\n", |
| info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); |
| info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; |
| } |
| |
| return (info->size); |
| } |
| |
| int flash_erase(flash_info_t * info, int s_first, int s_last) |
| { |
| FPWV *addr; |
| int flag, prot, sect, count; |
| ulong type, start; |
| int rcode = 0, flashtype = 0; |
| |
| if ((s_first < 0) || (s_first > s_last)) { |
| if (info->flash_id == FLASH_UNKNOWN) |
| printf("- missing\n"); |
| else |
| printf("- no sectors to erase\n"); |
| return 1; |
| } |
| |
| type = (info->flash_id & FLASH_VENDMASK); |
| |
| switch (type) { |
| case FLASH_MAN_SST: |
| flashtype = 1; |
| break; |
| default: |
| type = (info->flash_id & FLASH_VENDMASK); |
| printf("Can't erase unknown flash type %08lx - aborted\n", |
| info->flash_id); |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect = s_first; sect <= s_last; ++sect) { |
| if (info->protect[sect]) { |
| prot++; |
| } |
| } |
| |
| if (prot) |
| printf("- Warning: %d protected sectors will not be erased!\n", |
| prot); |
| else |
| printf("\n"); |
| |
| flag = disable_interrupts(); |
| |
| start = get_timer(0); |
| |
| if ((s_last - s_first) == (CONFIG_SYS_SST_SECT - 1)) { |
| if (prot == 0) { |
| addr = (FPWV *) info->start[0]; |
| |
| addr[FLASH_CYCLE1] = 0x00AA; /* unlock */ |
| addr[FLASH_CYCLE2] = 0x0055; /* unlock */ |
| addr[FLASH_CYCLE1] = 0x0080; /* erase mode */ |
| addr[FLASH_CYCLE1] = 0x00AA; /* unlock */ |
| addr[FLASH_CYCLE2] = 0x0055; /* unlock */ |
| *addr = 0x0030; /* erase chip */ |
| |
| count = 0; |
| start = get_timer(0); |
| |
| while ((*addr & 0x0080) != 0x0080) { |
| if (count++ > 0x10000) { |
| spin_wheel(); |
| count = 0; |
| } |
| |
| if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { |
| printf("Timeout\n"); |
| *addr = 0x00F0; /* reset to read mode */ |
| |
| return 1; |
| } |
| } |
| |
| *addr = 0x00F0; /* reset to read mode */ |
| |
| printf("\b. done\n"); |
| |
| if (flag) |
| enable_interrupts(); |
| |
| return 0; |
| } else if (prot == CONFIG_SYS_SST_SECT) { |
| return 1; |
| } |
| } |
| |
| /* Start erase on unprotected sectors */ |
| for (sect = s_first; sect <= s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| |
| addr = (FPWV *) (info->start[sect]); |
| |
| printf("."); |
| |
| /* arm simple, non interrupt dependent timer */ |
| start = get_timer(0); |
| |
| switch (flashtype) { |
| case 1: |
| { |
| FPWV *base; /* first address in bank */ |
| |
| flag = disable_interrupts(); |
| |
| base = (FPWV *) (CONFIG_SYS_FLASH_BASE); /* First sector */ |
| |
| base[FLASH_CYCLE1] = 0x00AA; /* unlock */ |
| base[FLASH_CYCLE2] = 0x0055; /* unlock */ |
| base[FLASH_CYCLE1] = 0x0080; /* erase mode */ |
| base[FLASH_CYCLE1] = 0x00AA; /* unlock */ |
| base[FLASH_CYCLE2] = 0x0055; /* unlock */ |
| *addr = 0x0050; /* erase sector */ |
| |
| if (flag) |
| enable_interrupts(); |
| |
| while ((*addr & 0x0080) != 0x0080) { |
| if (get_timer(start) > |
| CONFIG_SYS_FLASH_ERASE_TOUT) { |
| printf("Timeout\n"); |
| *addr = 0x00F0; /* reset to read mode */ |
| |
| rcode = 1; |
| break; |
| } |
| } |
| |
| *addr = 0x00F0; /* reset to read mode */ |
| break; |
| } |
| } /* switch (flashtype) */ |
| } |
| } |
| printf(" done\n"); |
| |
| if (flag) |
| enable_interrupts(); |
| |
| return rcode; |
| } |
| |
| int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) |
| { |
| ulong wp, count; |
| u16 data; |
| int rc; |
| |
| if (info->flash_id == FLASH_UNKNOWN) |
| return 4; |
| |
| /* get lower word aligned address */ |
| wp = addr; |
| |
| /* handle unaligned start bytes */ |
| if (wp & 1) { |
| data = *((FPWV *) wp); |
| data = (data << 8) | *src; |
| |
| if ((rc = write_word(info, (FPWV *) wp, data)) != 0) |
| return (rc); |
| |
| wp++; |
| cnt -= 1; |
| src++; |
| } |
| |
| while (cnt >= 2) { |
| /* |
| * handle word aligned part |
| */ |
| count = 0; |
| data = *((FPWV *) src); |
| |
| if ((rc = write_word(info, (FPWV *) wp, data)) != 0) |
| return (rc); |
| |
| wp += 2; |
| src += 2; |
| cnt -= 2; |
| |
| if (count++ > 0x800) { |
| spin_wheel(); |
| count = 0; |
| } |
| } |
| /* handle word aligned part */ |
| if (cnt) { |
| /* handle word aligned part */ |
| count = 0; |
| data = *((FPWV *) wp); |
| |
| data = (data & 0x00FF) | (*src << 8); |
| |
| if ((rc = write_word(info, (FPWV *) wp, data)) != 0) |
| return (rc); |
| |
| wp++; |
| src++; |
| cnt -= 1; |
| if (count++ > 0x800) { |
| spin_wheel(); |
| count = 0; |
| } |
| } |
| |
| if (cnt == 0) |
| return ERR_OK; |
| |
| return ERR_OK; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Write a word to Flash |
| * A word is 16 bits, whichever the bus width of the flash bank |
| * (not an individual chip) is. |
| * |
| * returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| int write_word(flash_info_t * info, FPWV * dest, u16 data) |
| { |
| ulong start; |
| int flag; |
| int res = 0; /* result, assume success */ |
| FPWV *base; /* first address in flash bank */ |
| |
| /* Check if Flash is (sufficiently) erased */ |
| if ((*dest & (u8) data) != (u8) data) { |
| return (2); |
| } |
| |
| base = (FPWV *) (CONFIG_SYS_FLASH_BASE); |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */ |
| base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */ |
| base[FLASH_CYCLE1] = (u8) 0x00A000A0; /* selects program mode */ |
| |
| *dest = data; /* start programming the data */ |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| start = get_timer(0); |
| |
| /* data polling for D7 */ |
| while (res == 0 |
| && (*dest & (u8) 0x00800080) != (data & (u8) 0x00800080)) { |
| if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { |
| *dest = (u8) 0x00F000F0; /* reset bank */ |
| res = 1; |
| } |
| } |
| |
| *dest++ = (u8) 0x00F000F0; /* reset bank */ |
| |
| return (res); |
| } |
| |
| static inline void spin_wheel(void) |
| { |
| static int p = 0; |
| static char w[] = "\\/-"; |
| |
| printf("\010%c", w[p]); |
| (++p == 3) ? (p = 0) : 0; |
| } |
| |
| #endif |