| // SPDX-License-Identifier: GPL-2.0+ OR BSD-2-Clause |
| /* |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| * |
| * 64-bit and little-endian target only until we need to support a different |
| * arch that needs this. |
| */ |
| |
| #include <elf.h> |
| #include <errno.h> |
| #include <inttypes.h> |
| #include <stdarg.h> |
| #include <stdbool.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include "compiler.h" |
| |
| #ifndef EM_AARCH64 |
| #define EM_AARCH64 183 |
| #endif |
| |
| #ifndef R_AARCH64_RELATIVE |
| #define R_AARCH64_RELATIVE 1027 |
| #endif |
| |
| #ifndef EM_MICROBLAZE |
| #define EM_MICROBLAZE 189 |
| #endif |
| |
| #ifndef R_MICROBLAZE_NONE |
| #define R_MICROBLAZE_NONE 0 |
| #endif |
| |
| #ifndef R_MICROBLAZE_32 |
| #define R_MICROBLAZE_32 1 |
| #endif |
| |
| #ifndef R_MICROBLAZE_REL |
| #define R_MICROBLAZE_REL 16 |
| #endif |
| |
| #ifndef R_MICROBLAZE_GLOB_DAT |
| #define R_MICROBLAZE_GLOB_DAT 18 |
| #endif |
| |
| static int ei_class; |
| static int ei_data; |
| |
| static uint64_t rela_start, rela_end, text_base, dyn_start; |
| |
| static const bool debug_en; |
| |
| static void debug(const char *fmt, ...) |
| { |
| va_list args; |
| |
| if (debug_en) { |
| va_start(args, fmt); |
| vprintf(fmt, args); |
| va_end(args); |
| } |
| } |
| |
| static uint16_t elf16_to_cpu(uint16_t data) |
| { |
| if (ei_data == ELFDATA2LSB) |
| return le16_to_cpu(data); |
| |
| return be16_to_cpu(data); |
| } |
| |
| static uint32_t elf32_to_cpu(uint32_t data) |
| { |
| if (ei_data == ELFDATA2LSB) |
| return le32_to_cpu(data); |
| |
| return be32_to_cpu(data); |
| } |
| |
| static bool supported_rela(Elf64_Rela *rela) |
| { |
| uint64_t mask = 0xffffffffULL; /* would be different on 32-bit */ |
| uint32_t type = rela->r_info & mask; |
| |
| switch (type) { |
| case R_AARCH64_RELATIVE: |
| return true; |
| default: |
| fprintf(stderr, "warning: unsupported relocation type %" |
| PRIu32 " at %" PRIx64 "\n", |
| type, rela->r_offset); |
| |
| return false; |
| } |
| } |
| |
| static int decode_elf64(FILE *felf, char **argv) |
| { |
| size_t size; |
| Elf64_Ehdr header; |
| uint64_t section_header_base, section_header_size; |
| uint64_t sh_addr, sh_offset, sh_size; |
| Elf64_Half sh_index, sh_num; |
| Elf64_Shdr *sh_table; /* Elf symbol table */ |
| int ret, i, machine; |
| char *sh_str; |
| |
| debug("64bit version\n"); |
| |
| /* Make sure we are at start */ |
| rewind(felf); |
| |
| size = fread(&header, 1, sizeof(header), felf); |
| if (size != sizeof(header)) { |
| fclose(felf); |
| return 25; |
| } |
| |
| machine = le16_to_cpu(header.e_machine); |
| debug("Machine\t%d\n", machine); |
| |
| if (machine != EM_AARCH64) { |
| fprintf(stderr, "%s: Not supported machine type\n", argv[0]); |
| return 30; |
| } |
| |
| text_base = le64_to_cpu(header.e_entry); |
| section_header_base = le64_to_cpu(header.e_shoff); |
| section_header_size = le16_to_cpu(header.e_shentsize) * |
| le16_to_cpu(header.e_shnum); |
| |
| sh_table = malloc(section_header_size); |
| if (!sh_table) { |
| fprintf(stderr, "%s: Cannot allocate space for section header\n", |
| argv[0]); |
| fclose(felf); |
| return 26; |
| } |
| |
| ret = fseek(felf, section_header_base, SEEK_SET); |
| if (ret) { |
| fprintf(stderr, "%s: Can't set pointer to section header: %x/%lx\n", |
| argv[0], ret, section_header_base); |
| free(sh_table); |
| fclose(felf); |
| return 26; |
| } |
| |
| size = fread(sh_table, 1, section_header_size, felf); |
| if (size != section_header_size) { |
| fprintf(stderr, "%s: Can't read section header: %lx/%lx\n", |
| argv[0], size, section_header_size); |
| free(sh_table); |
| fclose(felf); |
| return 27; |
| } |
| |
| sh_index = le16_to_cpu(header.e_shstrndx); |
| sh_size = le64_to_cpu(sh_table[sh_index].sh_size); |
| debug("e_shstrndx %x, sh_size %lx\n", sh_index, sh_size); |
| |
| sh_str = malloc(sh_size); |
| if (!sh_str) { |
| fprintf(stderr, "malloc failed\n"); |
| free(sh_table); |
| fclose(felf); |
| return 28; |
| } |
| |
| /* |
| * Specifies the byte offset from the beginning of the file |
| * to the first byte in the section. |
| */ |
| sh_offset = le64_to_cpu(sh_table[sh_index].sh_offset); |
| sh_num = le16_to_cpu(header.e_shnum); |
| |
| ret = fseek(felf, sh_offset, SEEK_SET); |
| if (ret) { |
| fprintf(stderr, "Setting up sh_offset failed\n"); |
| free(sh_str); |
| free(sh_table); |
| fclose(felf); |
| return 29; |
| } |
| |
| size = fread(sh_str, 1, sh_size, felf); |
| if (size != sh_size) { |
| fprintf(stderr, "%s: Can't read section: %lx/%lx\n", |
| argv[0], size, sh_size); |
| free(sh_str); |
| free(sh_table); |
| fclose(felf); |
| return 30; |
| } |
| |
| for (i = 0; i < sh_num; i++) { |
| char *sh_name = sh_str + le32_to_cpu(sh_table[i].sh_name); |
| |
| debug("%s\n", sh_name); |
| |
| sh_addr = le64_to_cpu(sh_table[i].sh_addr); |
| sh_offset = le64_to_cpu(sh_table[i].sh_offset); |
| sh_size = le64_to_cpu(sh_table[i].sh_size); |
| |
| if (!strcmp(".rela.dyn", sh_name)) { |
| debug("Found section\t\".rela_dyn\"\n"); |
| debug(" at addr\t0x%08x\n", sh_addr); |
| debug(" at offset\t0x%08x\n", sh_offset); |
| debug(" of size\t0x%08x\n", sh_size); |
| rela_start = sh_addr; |
| rela_end = rela_start + sh_size; |
| break; |
| } |
| } |
| |
| /* Clean up */ |
| free(sh_str); |
| free(sh_table); |
| fclose(felf); |
| |
| debug("text_base\t0x%08lx\n", text_base); |
| debug("rela_start\t0x%08lx\n", rela_start); |
| debug("rela_end\t0x%08lx\n", rela_end); |
| |
| if (!rela_start) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int decode_elf32(FILE *felf, char **argv) |
| { |
| size_t size; |
| Elf32_Ehdr header; |
| uint64_t section_header_base, section_header_size; |
| uint32_t sh_addr, sh_offset, sh_size; |
| Elf32_Half sh_index, sh_num; |
| Elf32_Shdr *sh_table; /* Elf symbol table */ |
| int ret, i, machine; |
| char *sh_str; |
| |
| debug("32bit version\n"); |
| |
| /* Make sure we are at start */ |
| rewind(felf); |
| |
| size = fread(&header, 1, sizeof(header), felf); |
| if (size != sizeof(header)) { |
| fclose(felf); |
| return 25; |
| } |
| |
| machine = elf16_to_cpu(header.e_machine); |
| debug("Machine %d\n", machine); |
| |
| if (machine != EM_MICROBLAZE) { |
| fprintf(stderr, "%s: Not supported machine type\n", argv[0]); |
| return 30; |
| } |
| |
| text_base = elf32_to_cpu(header.e_entry); |
| section_header_base = elf32_to_cpu(header.e_shoff); |
| section_header_size = elf16_to_cpu(header.e_shentsize) * |
| elf16_to_cpu(header.e_shnum); |
| |
| sh_table = malloc(section_header_size); |
| if (!sh_table) { |
| fprintf(stderr, "%s: Cannot allocate space for section header\n", |
| argv[0]); |
| fclose(felf); |
| return 26; |
| } |
| |
| ret = fseek(felf, section_header_base, SEEK_SET); |
| if (ret) { |
| fprintf(stderr, "%s: Can't set pointer to section header: %x/%lx\n", |
| argv[0], ret, section_header_base); |
| free(sh_table); |
| fclose(felf); |
| return 26; |
| } |
| |
| size = fread(sh_table, 1, section_header_size, felf); |
| if (size != section_header_size) { |
| fprintf(stderr, "%s: Can't read section header: %lx/%lx\n", |
| argv[0], size, section_header_size); |
| free(sh_table); |
| fclose(felf); |
| return 27; |
| } |
| |
| sh_index = elf16_to_cpu(header.e_shstrndx); |
| sh_size = elf32_to_cpu(sh_table[sh_index].sh_size); |
| debug("e_shstrndx %x, sh_size %lx\n", sh_index, sh_size); |
| |
| sh_str = malloc(sh_size); |
| if (!sh_str) { |
| fprintf(stderr, "malloc failed\n"); |
| free(sh_table); |
| fclose(felf); |
| return 28; |
| } |
| |
| /* |
| * Specifies the byte offset from the beginning of the file |
| * to the first byte in the section. |
| */ |
| sh_offset = elf32_to_cpu(sh_table[sh_index].sh_offset); |
| sh_num = elf16_to_cpu(header.e_shnum); |
| |
| ret = fseek(felf, sh_offset, SEEK_SET); |
| if (ret) { |
| fprintf(stderr, "Setting up sh_offset failed\n"); |
| free(sh_str); |
| free(sh_table); |
| fclose(felf); |
| return 29; |
| } |
| |
| size = fread(sh_str, 1, sh_size, felf); |
| if (size != sh_size) { |
| fprintf(stderr, "%s: Can't read section: %lx/%x\n", |
| argv[0], size, sh_size); |
| free(sh_str); |
| free(sh_table); |
| fclose(felf); |
| return 30; |
| } |
| |
| for (i = 0; i < sh_num; i++) { |
| char *sh_name = sh_str + elf32_to_cpu(sh_table[i].sh_name); |
| |
| debug("%s\n", sh_name); |
| |
| sh_addr = elf32_to_cpu(sh_table[i].sh_addr); |
| sh_offset = elf32_to_cpu(sh_table[i].sh_offset); |
| sh_size = elf32_to_cpu(sh_table[i].sh_size); |
| |
| if (!strcmp(".rela.dyn", sh_name)) { |
| debug("Found section\t\".rela_dyn\"\n"); |
| debug(" at addr\t0x%08x\n", sh_addr); |
| debug(" at offset\t0x%08x\n", sh_offset); |
| debug(" of size\t0x%08x\n", sh_size); |
| rela_start = sh_addr; |
| rela_end = rela_start + sh_size; |
| } |
| if (!strcmp(".dynsym", sh_name)) { |
| debug("Found section\t\".dynsym\"\n"); |
| debug(" at addr\t0x%08x\n", sh_addr); |
| debug(" at offset\t0x%08x\n", sh_offset); |
| debug(" of size\t0x%08x\n", sh_size); |
| dyn_start = sh_addr; |
| } |
| } |
| |
| /* Clean up */ |
| free(sh_str); |
| free(sh_table); |
| fclose(felf); |
| |
| debug("text_base\t0x%08lx\n", text_base); |
| debug("rela_start\t0x%08lx\n", rela_start); |
| debug("rela_end\t0x%08lx\n", rela_end); |
| debug("dyn_start\t0x%08lx\n", dyn_start); |
| |
| if (!rela_start) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int decode_elf(char **argv) |
| { |
| FILE *felf; |
| size_t size; |
| unsigned char e_ident[EI_NIDENT]; |
| |
| felf = fopen(argv[2], "r+b"); |
| if (!felf) { |
| fprintf(stderr, "%s: Cannot open %s: %s\n", |
| argv[0], argv[5], strerror(errno)); |
| return 2; |
| } |
| |
| size = fread(e_ident, 1, EI_NIDENT, felf); |
| if (size != EI_NIDENT) { |
| fclose(felf); |
| return 25; |
| } |
| |
| /* Check if this is really ELF file */ |
| if (e_ident[0] != 0x7f && |
| e_ident[1] != 'E' && |
| e_ident[2] != 'L' && |
| e_ident[3] != 'F') { |
| fclose(felf); |
| return 1; |
| } |
| |
| ei_class = e_ident[4]; |
| debug("EI_CLASS(1=32bit, 2=64bit) %d\n", ei_class); |
| |
| ei_data = e_ident[5]; |
| debug("EI_DATA(1=little endian, 2=big endian) %d\n", ei_data); |
| |
| if (ei_class == 2) |
| return decode_elf64(felf, argv); |
| |
| return decode_elf32(felf, argv); |
| } |
| |
| static int rela_elf64(char **argv, FILE *f) |
| { |
| int i, num; |
| |
| if ((rela_end - rela_start) % sizeof(Elf64_Rela)) { |
| fprintf(stderr, "%s: rela size isn't a multiple of Elf64_Rela\n", argv[0]); |
| return 3; |
| } |
| |
| num = (rela_end - rela_start) / sizeof(Elf64_Rela); |
| |
| for (i = 0; i < num; i++) { |
| Elf64_Rela rela, swrela; |
| uint64_t pos = rela_start + sizeof(Elf64_Rela) * i; |
| uint64_t addr; |
| |
| if (fseek(f, pos, SEEK_SET) < 0) { |
| fprintf(stderr, "%s: %s: seek to %" PRIx64 |
| " failed: %s\n", |
| argv[0], argv[1], pos, strerror(errno)); |
| } |
| |
| if (fread(&rela, sizeof(rela), 1, f) != 1) { |
| fprintf(stderr, "%s: %s: read rela failed at %" |
| PRIx64 "\n", |
| argv[0], argv[1], pos); |
| return 4; |
| } |
| |
| swrela.r_offset = le64_to_cpu(rela.r_offset); |
| swrela.r_info = le64_to_cpu(rela.r_info); |
| swrela.r_addend = le64_to_cpu(rela.r_addend); |
| |
| if (!supported_rela(&swrela)) |
| continue; |
| |
| debug("Rela %" PRIx64 " %" PRIu64 " %" PRIx64 "\n", |
| swrela.r_offset, swrela.r_info, swrela.r_addend); |
| |
| if (swrela.r_offset < text_base) { |
| fprintf(stderr, "%s: %s: bad rela at %" PRIx64 "\n", |
| argv[0], argv[1], pos); |
| return 4; |
| } |
| |
| addr = swrela.r_offset - text_base; |
| |
| if (fseek(f, addr, SEEK_SET) < 0) { |
| fprintf(stderr, "%s: %s: seek to %" |
| PRIx64 " failed: %s\n", |
| argv[0], argv[1], addr, strerror(errno)); |
| } |
| |
| if (fwrite(&rela.r_addend, sizeof(rela.r_addend), 1, f) != 1) { |
| fprintf(stderr, "%s: %s: write failed at %" PRIx64 "\n", |
| argv[0], argv[1], addr); |
| return 4; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static bool supported_rela32(Elf32_Rela *rela, uint32_t *type) |
| { |
| uint32_t mask = 0xffULL; /* would be different on 32-bit */ |
| *type = rela->r_info & mask; |
| |
| debug("Type:\t"); |
| |
| switch (*type) { |
| case R_MICROBLAZE_32: |
| debug("R_MICROBLAZE_32\n"); |
| return true; |
| case R_MICROBLAZE_GLOB_DAT: |
| debug("R_MICROBLAZE_GLOB_DAT\n"); |
| return true; |
| case R_MICROBLAZE_NONE: |
| debug("R_MICROBLAZE_NONE - ignoring - do nothing\n"); |
| return false; |
| case R_MICROBLAZE_REL: |
| debug("R_MICROBLAZE_REL\n"); |
| return true; |
| default: |
| fprintf(stderr, "warning: unsupported relocation type %" |
| PRIu32 " at %" PRIx32 "\n", *type, rela->r_offset); |
| |
| return false; |
| } |
| } |
| |
| static int rela_elf32(char **argv, FILE *f) |
| { |
| int i, num, index; |
| uint32_t value, type; |
| |
| if ((rela_end - rela_start) % sizeof(Elf32_Rela)) { |
| fprintf(stderr, "%s: rela size isn't a multiple of Elf32_Rela\n", argv[0]); |
| return 3; |
| } |
| |
| num = (rela_end - rela_start) / sizeof(Elf32_Rela); |
| |
| debug("Number of entries: %u\n", num); |
| |
| for (i = 0; i < num; i++) { |
| Elf32_Rela rela, swrela; |
| Elf32_Sym symbols; |
| uint32_t pos = rela_start + sizeof(Elf32_Rela) * i; |
| uint32_t addr, pos_dyn; |
| |
| debug("\nPosition:\t%d/0x%x\n", i, pos); |
| |
| if (fseek(f, pos, SEEK_SET) < 0) { |
| fprintf(stderr, "%s: %s: seek to %" PRIx32 |
| " failed: %s\n", |
| argv[0], argv[1], pos, strerror(errno)); |
| } |
| |
| if (fread(&rela, sizeof(rela), 1, f) != 1) { |
| fprintf(stderr, "%s: %s: read rela failed at %" |
| PRIx32 "\n", |
| argv[0], argv[1], pos); |
| return 4; |
| } |
| |
| debug("Rela:\toffset:\t%" PRIx32 " r_info:\t%" |
| PRIu32 " r_addend:\t%" PRIx32 "\n", |
| rela.r_offset, rela.r_info, rela.r_addend); |
| |
| swrela.r_offset = elf32_to_cpu(rela.r_offset); |
| swrela.r_info = elf32_to_cpu(rela.r_info); |
| swrela.r_addend = elf32_to_cpu(rela.r_addend); |
| |
| debug("SWRela:\toffset:\t%" PRIx32 " r_info:\t%" |
| PRIu32 " r_addend:\t%" PRIx32 "\n", |
| swrela.r_offset, swrela.r_info, swrela.r_addend); |
| |
| if (!supported_rela32(&swrela, &type)) |
| continue; |
| |
| if (swrela.r_offset < text_base) { |
| fprintf(stderr, "%s: %s: bad rela at %" PRIx32 "\n", |
| argv[0], argv[1], pos); |
| return 4; |
| } |
| |
| addr = swrela.r_offset - text_base; |
| |
| debug("Addr:\t0x%" PRIx32 "\n", addr); |
| |
| switch (type) { |
| case R_MICROBLAZE_REL: |
| if (fseek(f, addr, SEEK_SET) < 0) { |
| fprintf(stderr, "%s: %s: seek to %" |
| PRIx32 " failed: %s\n", |
| argv[0], argv[1], addr, strerror(errno)); |
| return 5; |
| } |
| |
| debug("Write addend\n"); |
| |
| if (fwrite(&rela.r_addend, sizeof(rela.r_addend), 1, f) != 1) { |
| fprintf(stderr, "%s: %s: write failed at %" PRIx32 "\n", |
| argv[0], argv[1], addr); |
| return 4; |
| } |
| break; |
| case R_MICROBLAZE_32: |
| case R_MICROBLAZE_GLOB_DAT: |
| /* global symbols read it and add reloc offset */ |
| index = swrela.r_info >> 8; |
| pos_dyn = dyn_start + sizeof(Elf32_Sym) * index; |
| |
| debug("Index:\t%d\n", index); |
| debug("Pos_dyn:\t0x%x\n", pos_dyn); |
| |
| if (fseek(f, pos_dyn, SEEK_SET) < 0) { |
| fprintf(stderr, "%s: %s: seek to %" |
| PRIx32 " failed: %s\n", |
| argv[0], argv[1], pos_dyn, strerror(errno)); |
| return 5; |
| } |
| |
| if (fread(&symbols, sizeof(symbols), 1, f) != 1) { |
| fprintf(stderr, "%s: %s: read symbols failed at %" |
| PRIx32 "\n", |
| argv[0], argv[1], pos_dyn); |
| return 4; |
| } |
| |
| debug("Symbol description:\n"); |
| debug(" st_name:\t0x%x\n", symbols.st_name); |
| debug(" st_value:\t0x%x\n", symbols.st_value); |
| debug(" st_size:\t0x%x\n", symbols.st_size); |
| |
| value = swrela.r_addend + symbols.st_value; |
| |
| debug("Value:\t0x%x\n", value); |
| |
| if (fseek(f, addr, SEEK_SET) < 0) { |
| fprintf(stderr, "%s: %s: seek to %" |
| PRIx32 " failed: %s\n", |
| argv[0], argv[1], addr, strerror(errno)); |
| return 5; |
| } |
| |
| if (fwrite(&value, sizeof(rela.r_addend), 1, f) != 1) { |
| fprintf(stderr, "%s: %s: write failed at %" PRIx32 "\n", |
| argv[0], argv[1], addr); |
| return 4; |
| } |
| |
| break; |
| case R_MICROBLAZE_NONE: |
| debug("R_MICROBLAZE_NONE - skip\n"); |
| break; |
| default: |
| fprintf(stderr, "warning: unsupported relocation type %" |
| PRIu32 " at %" PRIx32 "\n", |
| type, rela.r_offset); |
| } |
| } |
| |
| return 0; |
| } |
| |
| int main(int argc, char **argv) |
| { |
| FILE *f; |
| int ret; |
| uint64_t file_size; |
| |
| if (argc != 3) { |
| fprintf(stderr, "Statically apply ELF rela relocations\n"); |
| fprintf(stderr, "Usage: %s <bin file> <u-boot ELF>\n", |
| argv[0]); |
| return 1; |
| } |
| |
| ret = decode_elf(argv); |
| if (ret) { |
| fprintf(stderr, "ELF decoding failed\n"); |
| return ret; |
| } |
| |
| if (rela_start > rela_end || rela_start < text_base) { |
| fprintf(stderr, "%s: bad rela bounds\n", argv[0]); |
| return 3; |
| } |
| |
| rela_start -= text_base; |
| rela_end -= text_base; |
| dyn_start -= text_base; |
| |
| f = fopen(argv[1], "r+b"); |
| if (!f) { |
| fprintf(stderr, "%s: Cannot open %s: %s\n", |
| argv[0], argv[1], strerror(errno)); |
| return 2; |
| } |
| |
| fseek(f, 0, SEEK_END); |
| file_size = ftell(f); |
| rewind(f); |
| |
| if (rela_end > file_size) { |
| // Most likely compiler inserted some section that didn't get |
| // objcopy-ed into the final binary |
| rela_end = file_size; |
| } |
| |
| if (ei_class == 2) |
| ret = rela_elf64(argv, f); |
| else |
| ret = rela_elf32(argv, f); |
| |
| if (fclose(f) < 0) { |
| fprintf(stderr, "%s: %s: close failed: %s\n", |
| argv[0], argv[1], strerror(errno)); |
| return 4; |
| } |
| |
| return ret; |
| } |