| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Xilinx GMII2RGMII phy driver |
| * |
| * Copyright (C) 2018 Xilinx, Inc. |
| */ |
| |
| #include <dm.h> |
| #include <phy.h> |
| #include <config.h> |
| #include <common.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define ZYNQ_GMII2RGMII_REG 0x10 |
| #define ZYNQ_GMII2RGMII_SPEED_MASK (BMCR_SPEED1000 | BMCR_SPEED100) |
| |
| static int xilinxgmiitorgmii_config(struct phy_device *phydev) |
| { |
| struct phy_device *ext_phydev = phydev->priv; |
| |
| debug("%s\n", __func__); |
| if (ext_phydev->drv->config) |
| ext_phydev->drv->config(ext_phydev); |
| |
| return 0; |
| } |
| |
| static int xilinxgmiitorgmii_extread(struct phy_device *phydev, int addr, |
| int devaddr, int regnum) |
| { |
| struct phy_device *ext_phydev = phydev->priv; |
| |
| debug("%s\n", __func__); |
| if (ext_phydev->drv->readext) |
| ext_phydev->drv->readext(ext_phydev, addr, devaddr, regnum); |
| |
| return 0; |
| } |
| |
| static int xilinxgmiitorgmii_extwrite(struct phy_device *phydev, int addr, |
| int devaddr, int regnum, u16 val) |
| |
| { |
| struct phy_device *ext_phydev = phydev->priv; |
| |
| debug("%s\n", __func__); |
| if (ext_phydev->drv->writeext) |
| ext_phydev->drv->writeext(ext_phydev, addr, devaddr, regnum, |
| val); |
| |
| return 0; |
| } |
| |
| static int xilinxgmiitorgmii_startup(struct phy_device *phydev) |
| { |
| u16 val = 0; |
| struct phy_device *ext_phydev = phydev->priv; |
| |
| debug("%s\n", __func__); |
| ext_phydev->dev = phydev->dev; |
| if (ext_phydev->drv->startup) |
| ext_phydev->drv->startup(ext_phydev); |
| |
| val = phy_read(phydev, phydev->addr, ZYNQ_GMII2RGMII_REG); |
| val &= ~ZYNQ_GMII2RGMII_SPEED_MASK; |
| |
| if (ext_phydev->speed == SPEED_1000) |
| val |= BMCR_SPEED1000; |
| else if (ext_phydev->speed == SPEED_100) |
| val |= BMCR_SPEED100; |
| |
| phy_write(phydev, phydev->addr, ZYNQ_GMII2RGMII_REG, val | |
| BMCR_FULLDPLX); |
| |
| phydev->duplex = ext_phydev->duplex; |
| phydev->speed = ext_phydev->speed; |
| phydev->link = ext_phydev->link; |
| |
| return 0; |
| } |
| |
| static int xilinxgmiitorgmii_probe(struct phy_device *phydev) |
| { |
| int ofnode = phydev->addr; |
| u32 phy_of_handle; |
| int ext_phyaddr = -1; |
| struct phy_device *ext_phydev; |
| |
| debug("%s\n", __func__); |
| |
| if (phydev->interface != PHY_INTERFACE_MODE_GMII) { |
| printf("Incorrect interface type\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Read the phy address again as the one we read in ethernet driver |
| * was overwritten for the purpose of storing the ofnode |
| */ |
| phydev->addr = fdtdec_get_int(gd->fdt_blob, ofnode, "reg", -1); |
| phy_of_handle = fdtdec_lookup_phandle(gd->fdt_blob, ofnode, |
| "phy-handle"); |
| if (phy_of_handle > 0) |
| ext_phyaddr = fdtdec_get_int(gd->fdt_blob, |
| phy_of_handle, |
| "reg", -1); |
| ext_phydev = phy_find_by_mask(phydev->bus, |
| 1 << ext_phyaddr, |
| PHY_INTERFACE_MODE_RGMII); |
| if (!ext_phydev) { |
| printf("%s, No external phy device found\n", __func__); |
| return -EINVAL; |
| } |
| |
| ext_phydev->node = offset_to_ofnode(phy_of_handle); |
| phydev->priv = ext_phydev; |
| |
| debug("%s, gmii2rgmmi:0x%x, extphy:0x%x\n", __func__, phydev->addr, |
| ext_phyaddr); |
| |
| phydev->flags |= PHY_FLAG_BROKEN_RESET; |
| |
| return 0; |
| } |
| |
| static struct phy_driver gmii2rgmii_driver = { |
| .name = "XILINX GMII2RGMII", |
| .uid = PHY_GMII2RGMII_ID, |
| .mask = 0xffffffff, |
| .features = PHY_GBIT_FEATURES, |
| .probe = xilinxgmiitorgmii_probe, |
| .config = xilinxgmiitorgmii_config, |
| .startup = xilinxgmiitorgmii_startup, |
| .writeext = xilinxgmiitorgmii_extwrite, |
| .readext = xilinxgmiitorgmii_extread, |
| }; |
| |
| int phy_xilinx_gmii2rgmii_init(void) |
| { |
| phy_register(&gmii2rgmii_driver); |
| |
| return 0; |
| } |