| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2018 Microsemi Corporation |
| */ |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "mscc,jr2"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "mips,mips24KEc"; |
| device_type = "cpu"; |
| clocks = <&cpu_clk>; |
| reg = <0>; |
| }; |
| }; |
| |
| aliases { |
| serial0 = &uart0; |
| }; |
| |
| cpuintc: interrupt-controller@0 { |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| compatible = "mti,cpu-interrupt-controller"; |
| }; |
| |
| cpu_clk: cpu-clock { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <500000000>; |
| }; |
| |
| ahb_clk: ahb-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <250000000>; |
| }; |
| |
| ahb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x70000000 0x2000000>; |
| |
| interrupt-parent = <&intc>; |
| |
| cpu_ctrl: syscon@0 { |
| compatible = "mscc,jr2-cpu-syscon", "syscon"; |
| reg = <0x0 0x2c>; |
| }; |
| |
| intc: interrupt-controller@70 { |
| compatible = "mscc,jr2-icpu-intr"; |
| reg = <0x70 0x94>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupt-parent = <&cpuintc>; |
| interrupts = <2>; |
| }; |
| |
| uart0: serial@100000 { |
| pinctrl-0 = <&uart_pins>; |
| pinctrl-names = "default"; |
| compatible = "ns16550a"; |
| reg = <0x100000 0x20>; |
| interrupts = <6>; |
| clocks = <&ahb_clk>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| uart2: serial@100800 { |
| pinctrl-0 = <&uart2_pins>; |
| pinctrl-names = "default"; |
| compatible = "ns16550a"; |
| reg = <0x100800 0x20>; |
| interrupts = <7>; |
| clocks = <&ahb_clk>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| spi0: spi-master@101000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "mscc,jaguar2-spi", "snps,dw-apb-ssi"; |
| reg = <0x101000 0x40>; |
| num-chipselect = <4>; |
| bus-num = <0>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| spi-max-frequency = <18000000>; /* input clock */ |
| clocks = <&ahb_clk>; |
| |
| status = "disabled"; |
| }; |
| |
| reset@1010008 { |
| compatible = "mscc,jr2-chip-reset"; |
| reg = <0x1010008 0x4>; |
| }; |
| |
| gpio: pinctrl@1070034 { |
| compatible = "mscc,jaguar2-pinctrl"; |
| reg = <0x1010038 0x90>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&gpio 0 0 64>; |
| |
| sgpio_pins: sgpio-pins { |
| pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; |
| function = "sg0"; |
| }; |
| |
| sgpio1_pins: sgpio1-pins { |
| pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13"; |
| function = "sg1"; |
| }; |
| |
| sgpio2_pins: sgpio2-pins { |
| pins = "GPIO_30", "GPIO_31", |
| "GPIO_32", "GPIO_33"; |
| function = "sg2"; |
| }; |
| |
| uart_pins: uart-pins { |
| pins = "GPIO_10", "GPIO_11"; |
| function = "uart"; |
| }; |
| |
| uart2_pins: uart2-pins { |
| pins = "GPIO_24", "GPIO_25"; |
| function = "uart2"; |
| }; |
| }; |
| |
| sgpio: gpio@1010150 { |
| compatible = "mscc,ocelot-sgpio"; |
| status = "disabled"; |
| pinctrl-0 = <&sgpio_pins>; |
| pinctrl-names = "default"; |
| reg = <0x1010150 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&sgpio 0 0 64>; |
| gpio-bank-name = "sgpio0_"; |
| sgpio-clock = <0x14>; |
| }; |
| |
| sgpio1: gpio@101025c { |
| compatible = "mscc,ocelot-sgpio"; |
| status = "disabled"; |
| pinctrl-0 = <&sgpio1_pins>; |
| pinctrl-names = "default"; |
| reg = <0x101025c 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&sgpio1 0 0 64>; |
| gpio-bank-name = "sgpio1_"; |
| sgpio-clock = <0x14>; |
| }; |
| |
| sgpio2: gpio@1010368 { |
| compatible = "mscc,ocelot-sgpio"; |
| status = "disabled"; |
| pinctrl-0 = <&sgpio2_pins>; |
| pinctrl-names = "default"; |
| reg = <0x1010368 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&sgpio2 0 0 64>; |
| gpio-bank-name = "sgpio2_"; |
| sgpio-clock = <0x14>; |
| }; |
| |
| switch: switch@1010000 { |
| compatible = "mscc,vsc7454-switch"; |
| reg = <0x01040000 0x0100>, // VTSS_TO_DEV_0 |
| <0x01050000 0x0100>, // VTSS_TO_DEV_1 |
| <0x01060000 0x0100>, // VTSS_TO_DEV_2 |
| <0x01070000 0x0100>, // VTSS_TO_DEV_3 |
| <0x01080000 0x0100>, // VTSS_TO_DEV_4 |
| <0x01090000 0x0100>, // VTSS_TO_DEV_5 |
| <0x010a0000 0x0100>, // VTSS_TO_DEV_6 |
| <0x010b0000 0x0100>, // VTSS_TO_DEV_7 |
| <0x010c0000 0x0100>, // VTSS_TO_DEV_8 |
| <0x010d0000 0x0100>, // VTSS_TO_DEV_9 |
| <0x010e0000 0x0100>, // VTSS_TO_DEV_10 |
| <0x010f0000 0x0100>, // VTSS_TO_DEV_11 |
| <0x01100000 0x0100>, // VTSS_TO_DEV_12 |
| <0x01110000 0x0100>, // VTSS_TO_DEV_13 |
| <0x01120000 0x0100>, // VTSS_TO_DEV_14 |
| <0x01130000 0x0100>, // VTSS_TO_DEV_15 |
| <0x01140000 0x0100>, // VTSS_TO_DEV_16 |
| <0x01150000 0x0100>, // VTSS_TO_DEV_17 |
| <0x01160000 0x0100>, // VTSS_TO_DEV_18 |
| <0x01170000 0x0100>, // VTSS_TO_DEV_19 |
| <0x01180000 0x0100>, // VTSS_TO_DEV_20 |
| <0x01190000 0x0100>, // VTSS_TO_DEV_21 |
| <0x011a0000 0x0100>, // VTSS_TO_DEV_22 |
| <0x011b0000 0x0100>, // VTSS_TO_DEV_23 |
| <0x011c0000 0x0100>, // VTSS_TO_DEV_24 |
| <0x011d0000 0x0100>, // VTSS_TO_DEV_25 |
| <0x011e0000 0x0100>, // VTSS_TO_DEV_26 |
| <0x011f0000 0x0100>, // VTSS_TO_DEV_27 |
| <0x01200000 0x0100>, // VTSS_TO_DEV_28 |
| <0x01210000 0x0100>, // VTSS_TO_DEV_29 |
| <0x01220000 0x0100>, // VTSS_TO_DEV_30 |
| <0x01230000 0x0100>, // VTSS_TO_DEV_31 |
| <0x01240000 0x0100>, // VTSS_TO_DEV_32 |
| <0x01250000 0x0100>, // VTSS_TO_DEV_33 |
| <0x01260000 0x0100>, // VTSS_TO_DEV_34 |
| <0x01270000 0x0100>, // VTSS_TO_DEV_35 |
| <0x01280000 0x0100>, // VTSS_TO_DEV_36 |
| <0x01290000 0x0100>, // VTSS_TO_DEV_37 |
| <0x012a0000 0x0100>, // VTSS_TO_DEV_38 |
| <0x012b0000 0x0100>, // VTSS_TO_DEV_39 |
| <0x012c0000 0x0100>, // VTSS_TO_DEV_40 |
| <0x012d0000 0x0100>, // VTSS_TO_DEV_41 |
| <0x012e0000 0x0100>, // VTSS_TO_DEV_42 |
| <0x012f0000 0x0100>, // VTSS_TO_DEV_43 |
| <0x01300000 0x0100>, // VTSS_TO_DEV_44 |
| <0x01310000 0x0100>, // VTSS_TO_DEV_45 |
| <0x01320000 0x0100>, // VTSS_TO_DEV_46 |
| <0x01330000 0x0100>, // VTSS_TO_DEV_47 |
| <0x01f00000 0x100000>, // ANA_AC |
| <0x01d00000 0x100000>, // ANA_CL |
| <0x01e00000 0x100000>, // ANA_L2 |
| <0x01410000 0x10000>, // ASM |
| <0x01460000 0x10000>, // HSIO |
| <0x01420000 0x00000>, // LRN |
| <0x017d0000 0x10000>, // QFWD |
| <0x01020000 0x20000>, // QS |
| <0x017e0000 0x10000>, // QSYS |
| <0x01b00000 0x80000>, // REW |
| <0x01010000 0x100>, // GCB |
| <0x00000000 0x100>; // ICPU |
| reg-names = "port0", "port1", "port2", "port3", "port4", |
| "port5", "port6", "port7", "port8", "port9", |
| "port10", "port11", "port12", "port13", |
| "port14", "port15", "port16", "port17", |
| "port18", "port19", "port20", "port21", |
| "port22", "port23", "port24", "port25", |
| "port26", "port27", "port28", "port29", |
| "port30", "port31", "port32", "port33", |
| "port34", "port35", "port36", "port37", |
| "port38", "port39", "port40", "port41", |
| "port42", "port43", "port44", "port45", |
| "port46", "port47", "ana_ac", "ana_cl", |
| "ana_l2", "asm", "hsio", "lrn", "qfwd", |
| "qs", "qsys", "rew", "gcb", "icpu"; |
| status = "okay"; |
| |
| ethernet-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| mdio0: mdio@010100c8 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "mscc,jr2-miim"; |
| reg = <0x010100c8 0x24>; |
| status = "disabled"; |
| }; |
| |
| mdio1: mdio@010100ec { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "mscc,jr2-miim"; |
| reg = <0x010100ec 0x24>; |
| status = "disabled"; |
| }; |
| |
| mdio2: mdio@01010110 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "mscc,jr2-miim"; |
| reg = <0x01010110 0x24>; |
| status = "disabled"; |
| }; |
| |
| hsio: syscon@10d0000 { |
| compatible = "mscc,jr2-hsio", "syscon", "simple-mfd"; |
| reg = <0x10d0000 0x10000>; |
| |
| serdes_hsio: serdes_hsio { |
| compatible = "mscc,vsc7454-serdes"; |
| #phy-cells = <3>; |
| }; |
| }; |
| }; |
| }; |