blob: 57917da25cf21ccf5a6848dbf9f94b9747f4622a [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* boot-common.c
*
* Common bootmode functions for omap based boards
*
* Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
*/
#include <common.h>
#include <ahci.h>
#include <log.h>
#include <dm/uclass.h>
#include <fs_loader.h>
#include <spl.h>
#include <asm/global_data.h>
#include <asm/omap_common.h>
#include <asm/omap_sec_common.h>
#include <asm/arch/omap.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <watchdog.h>
#include <scsi.h>
#include <i2c.h>
#include <remoteproc.h>
#include <image.h>
DECLARE_GLOBAL_DATA_PTR;
#define IPU1_LOAD_ADDR (0xa17ff000)
#define MAX_REMOTECORE_BIN_SIZE (8 * 0x100000)
#define IPU2_LOAD_ADDR (IPU1_LOAD_ADDR + MAX_REMOTECORE_BIN_SIZE)
__weak u32 omap_sys_boot_device(void)
{
return BOOT_DEVICE_NONE;
}
void save_omap_boot_params(void)
{
u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
struct omap_boot_parameters *omap_boot_params;
int sys_boot_device = 0;
u32 boot_device;
u32 boot_mode;
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
return;
omap_boot_params = (struct omap_boot_parameters *)boot_params;
boot_device = omap_boot_params->boot_device;
boot_mode = MMCSD_MODE_UNDEFINED;
/* Boot device */
#ifdef BOOT_DEVICE_NAND_I2C
/*
* Re-map NAND&I2C boot-device to the "normal" NAND boot-device.
* Otherwise the SPL boot IF can't handle this device correctly.
* Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens
* Draco leads to this boot-device passed to SPL from the BootROM.
*/
if (boot_device == BOOT_DEVICE_NAND_I2C)
boot_device = BOOT_DEVICE_NAND;
#endif
#ifdef BOOT_DEVICE_QSPI_4
/*
* We get different values for QSPI_1 and QSPI_4 being used, but
* don't actually care about this difference. Rather than
* mangle the later code, if we're coming in as QSPI_4 just
* change to the QSPI_1 value.
*/
if (boot_device == BOOT_DEVICE_QSPI_4)
boot_device = BOOT_DEVICE_SPI;
#endif
/*
* When booting from peripheral booting, the boot device is not usable
* as-is (unless there is support for it), so the boot device is instead
* figured out using the SYS_BOOT pins.
*/
switch (boot_device) {
#if defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT)
case BOOT_DEVICE_UART:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_STORAGE)
case BOOT_DEVICE_USB:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USB_ETHER)
case BOOT_DEVICE_USBETH:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH)
case BOOT_DEVICE_CPGMAC:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU)
case BOOT_DEVICE_DFU:
sys_boot_device = 1;
break;
#endif
}
if (sys_boot_device) {
boot_device = omap_sys_boot_device();
/* MMC raw mode will fallback to FS mode. */
if ((boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END))
boot_mode = MMCSD_MODE_RAW;
}
gd->arch.omap_boot_device = boot_device;
/* Boot mode */
#ifdef CONFIG_OMAP34XX
if ((boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END)) {
switch (boot_device) {
case BOOT_DEVICE_MMC1:
boot_mode = MMCSD_MODE_FS;
break;
case BOOT_DEVICE_MMC2:
boot_mode = MMCSD_MODE_RAW;
break;
}
}
#else
/*
* If the boot device was dynamically changed and doesn't match what
* the bootrom initially booted, we cannot use the boot device
* descriptor to figure out the boot mode.
*/
if ((boot_device == omap_boot_params->boot_device) &&
(boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END)) {
boot_params = omap_boot_params->boot_device_descriptor;
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
return;
boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET));
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
return;
boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET));
if (boot_mode != MMCSD_MODE_FS &&
boot_mode != MMCSD_MODE_RAW)
#ifdef CONFIG_SUPPORT_EMMC_BOOT
boot_mode = MMCSD_MODE_EMMCBOOT;
#else
boot_mode = MMCSD_MODE_UNDEFINED;
#endif
}
#endif
gd->arch.omap_boot_mode = boot_mode;
#if !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX)
/* CH flags */
gd->arch.omap_ch_flags = omap_boot_params->ch_flags;
#endif
}
#ifdef CONFIG_SPL_BUILD
u32 spl_boot_device(void)
{
return gd->arch.omap_boot_device;
}
u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
return gd->arch.omap_boot_mode;
}
int load_firmware(char *name_fw, u32 *loadaddr)
{
struct udevice *fsdev;
int size = 0;
if (!IS_ENABLED(CONFIG_FS_LOADER))
return 0;
if (!*loadaddr)
return 0;
if (!get_fs_loader(&fsdev)) {
size = request_firmware_into_buf(fsdev, name_fw,
(void *)*loadaddr, 0, 0);
}
return size;
}
void spl_boot_ipu(void)
{
int ret, size;
u32 loadaddr = IPU1_LOAD_ADDR;
if (!IS_ENABLED(CONFIG_SPL_BUILD) ||
!IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
return;
size = load_firmware("dra7-ipu1-fw.xem4", &loadaddr);
if (size <= 0) {
pr_err("Firmware loading failed\n");
goto skip_ipu1;
}
enable_ipu1_clocks();
ret = rproc_dev_init(0);
if (ret) {
debug("%s: IPU1 failed to initialize on rproc (%d)\n",
__func__, ret);
goto skip_ipu1;
}
ret = rproc_load(0, IPU1_LOAD_ADDR, 0x2000000);
if (ret) {
debug("%s: IPU1 failed to load on rproc (%d)\n", __func__,
ret);
goto skip_ipu1;
}
debug("Starting IPU1...\n");
ret = rproc_start(0);
if (ret)
debug("%s: IPU1 failed to start (%d)\n", __func__, ret);
skip_ipu1:
loadaddr = IPU2_LOAD_ADDR;
size = load_firmware("dra7-ipu2-fw.xem4", &loadaddr);
if (size <= 0) {
pr_err("Firmware loading failed for ipu2\n");
return;
}
enable_ipu2_clocks();
ret = rproc_dev_init(1);
if (ret) {
debug("%s: IPU2 failed to initialize on rproc (%d)\n", __func__,
ret);
return;
}
ret = rproc_load(1, IPU2_LOAD_ADDR, 0x2000000);
if (ret) {
debug("%s: IPU2 failed to load on rproc (%d)\n", __func__,
ret);
return;
}
debug("Starting IPU2...\n");
ret = rproc_start(1);
if (ret)
debug("%s: IPU2 failed to start (%d)\n", __func__, ret);
}
void spl_board_init(void)
{
/* Prepare console output */
preloader_console_init();
#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
gpmc_init();
#endif
#if defined(CONFIG_SPL_I2C) && !CONFIG_IS_ENABLED(DM_I2C)
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW)
arch_misc_init();
#endif
#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
hw_watchdog_init();
#endif
#ifdef CONFIG_AM33XX
am33xx_spl_board_init();
#endif
if (IS_ENABLED(CONFIG_SPL_BUILD) &&
IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
spl_boot_ipu();
}
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
typedef void __noreturn (*image_entry_noargs_t)(u32 *);
image_entry_noargs_t image_entry =
(image_entry_noargs_t) spl_image->entry_point;
u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
debug("image entry point: 0x%lX\n", spl_image->entry_point);
/* Pass the saved boot_params from rom code */
image_entry((u32 *)boot_params);
}
#endif
#ifdef CONFIG_TI_SECURE_DEVICE
void board_fit_image_post_process(const void *fit, int node, void **p_image,
size_t *p_size)
{
secure_boot_verify_image(p_image, p_size);
}
static void tee_image_process(ulong tee_image, size_t tee_size)
{
secure_tee_install((u32)tee_image);
}
U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_TEE, tee_image_process);
#endif