blob: 52dcf7a3bc429b57dc3043a2617cb9d355992158 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2014 Samsung Electronics
*
* Configuration settings for the SAMSUNG EXYNOS5 board.
*/
#ifndef __CONFIG_EXYNOS4_COMMON_H
#define __CONFIG_EXYNOS4_COMMON_H
#define CONFIG_EXYNOS4 /* Exynos4 Family */
#include "exynos-common.h"
#define CONFIG_BOARD_COMMON
/* SD/MMC configuration */
#define CONFIG_MMC_DEFAULT_DEV 0
#define DFU_DEFAULT_POLL_TIMEOUT 300
/* USB Samsung's IDs */
#define CONFIG_G_DNL_THOR_VENDOR_NUM 0x04E8
#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_USB_GADGET_DWC2_OTG_PHY
/* Common environment variables */
#define ENV_ITB \
"loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
"${kernelname}\0" \
"loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
"${initrdname}\0" \
"loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
"${fdtfile}\0" \
"check_ramdisk=" \
"if run loadinitrd; then " \
"setenv initrd_addr ${initrdaddr};" \
"else " \
"setenv initrd_addr -;" \
"fi;\0" \
"check_dtb=" \
"if run loaddtb; then " \
"setenv fdt_addr ${fdtaddr};" \
"else " \
"setenv fdt_addr;" \
"fi;\0" \
"kernel_args=" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart}" \
" ${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};\0" \
"boot_fit=" \
"setenv kerneladdr 0x42000000;" \
"setenv kernelname Image.itb;" \
"run loadkernel;" \
"run kernel_args;" \
"bootm ${kerneladdr}#${board_name}\0" \
"boot_uimg=" \
"setenv kerneladdr 0x40007FC0;" \
"setenv kernelname uImage;" \
"run check_dtb;" \
"run check_ramdisk;" \
"run loadkernel;" \
"run kernel_args;" \
"bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
"boot_zimg=" \
"setenv kerneladdr 0x40007FC0;" \
"setenv kernelname zImage;" \
"run check_dtb;" \
"run check_ramdisk;" \
"run loadkernel;" \
"run kernel_args;" \
"bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
"autoboot=" \
"if test -e mmc ${mmcdev}:${mmcbootpart} Image.itb; then; " \
"run boot_fit;" \
"elif test -e mmc ${mmcdev}:${mmcbootpart} zImage; then; " \
"run boot_zimg;" \
"elif test -e mmc ${mmcdev}:${mmcbootpart} uImage; then; " \
"run boot_uimg;" \
"fi;\0"
#endif /* __CONFIG_EXYNOS4_COMMON_H */