blob: 7294a3c20a5a4d4453d6ebc6a57a07327c8daf43 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2012 Michael Walle
* Michael Walle <michael@walle.cc>
*/
#ifndef _CONFIG_LSXL_H
#define _CONFIG_LSXL_H
/*
* Version number information
*/
#if defined(CONFIG_LSCHLV2)
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
#elif defined(CONFIG_LSXHL)
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
#else
#error "unknown board"
#endif
/*
* General configuration options
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KW88F6281 /* SOC Name */
#define CONFIG_KIRKWOOD_GPIO
#include "mv-common.h"
/* loading initramfs images without uimage header */
/*
* Environment variables configurations
*/
#ifdef CONFIG_SPI_FLASH
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 8
#endif
/*
* Default environment variables
*/
#if defined(CONFIG_LSXHL)
#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
#elif defined(CONFIG_LSCHLV2)
#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
#else
#error "Unsupported board"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootsource=legacy\0" \
"hdpart=0:1\0" \
"kernel_addr=0x00800000\0" \
"ramdisk_addr=0x01000000\0" \
"fdt_addr=0x00ff0000\0" \
"bootcmd_legacy=sata init " \
"&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\
"&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
"&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
"bootcmd_net=bootp ${kernel_addr} vmlinuz " \
"&& tftpboot ${ramdisk_addr} initrd.img " \
"&& setenv ramdisk_len ${filesize} " \
"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \
"&& bootz ${kernel_addr} " \
"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
"bootcmd_hdd=sata init " \
"&& load sata ${hdpart} ${kernel_addr} /vmlinuz " \
"&& load sata ${hdpart} ${ramdisk_addr} /initrd.img " \
"&& setenv ramdisk_len ${filesize} " \
"&& load sata ${hdpart} ${fdt_addr} /dtb " \
"&& bootz ${kernel_addr} " \
"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
"bootcmd_usb=usb start " \
"&& load usb 0:1 ${kernel_addr} /vmlinuz " \
"&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
"&& setenv ramdisk_len ${filesize} " \
"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \
"&& bootz ${kernel_addr} " \
"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
"eraseenv=sf probe 0 " \
"&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
" +" __stringify(CONFIG_ENV_SIZE) "\0" \
"config_nc_dhcp=setenv autoload_old ${autoload}; " \
"setenv autoload no " \
"&& bootp " \
"&& setenv ncip " \
"&& setenv autoload ${autoload_old}; " \
"setenv autoload_old\0" \
"standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
"setenv ncip; setenv gatewayip; setenv ethact; " \
"setenv bootfile; setenv dnsip; " \
"setenv bootsource legacy; run ser\0" \
"restore_env=run standard_env; saveenv; reset\0" \
"ser=setenv stdin serial; setenv stdout serial; " \
"setenv stderr serial\0" \
"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0"
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
#define CONFIG_PHY_BASE_ADR 7
#undef CONFIG_RESET_PHY_R
#endif /* CONFIG_CMD_NET */
#ifdef CONFIG_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_SYS_64BIT_LBA
#define CONFIG_LBA48
#endif
#endif /* _CONFIG_LSXL_H */