| /* |
| * (C) Copyright 2008-2009 |
| * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de> |
| * Jens Scharsig <esw@bus-elektronik.de> |
| * |
| * Configuation settings for the EB+CPUx9K2 board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef _CONFIG_EB_CPUx9K2_H_ |
| #define _CONFIG_EB_CPUx9K2_H_ |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| #define CONFIG_AT91RM9200 /* It's an Atmel AT91RM9200 SoC */ |
| #define CONFIG_EB_CPUX9K2 /* on an EP+CPUX9K2 Board */ |
| #define USE_920T_MMU |
| |
| #define CONFIG_VERSION_VARIABLE |
| #define CONFIG_IDENT_STRING " on EB+CPUx9K2" |
| |
| #include <asm/hardware.h> /* needed for port definitions */ |
| |
| #define CONFIG_MISC_INIT_R |
| #define CONFIG_BOARD_EARLY_INIT_F |
| |
| #define MACH_TYPE_EB_CPUX9K2 1977 |
| #define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 |
| /*--------------------------------------------------------------------------*/ |
| #define CONFIG_SYS_TEXT_BASE 0x00000000 |
| #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ |
| |
| #define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ |
| #define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 |
| #define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ |
| |
| |
| #define CONFIG_BOOT_RETRY_TIME 30 |
| #define CONFIG_CMDLINE_EDITING |
| |
| #define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ |
| #define CONFIG_SYS_PBSIZE \ |
| (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| |
| #define CONFIG_STACKSIZE (32*1024) /* regular stack */ |
| |
| /* |
| * ARM asynchronous clock |
| */ |
| |
| #define AT91C_MAIN_CLOCK 179404800 /* from 12.288 MHz * 73 / 5 */ |
| #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) |
| #define CONFIG_SYS_HZ 1000 |
| #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) |
| |
| #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */ |
| |
| #define CONFIG_CMDLINE_TAG 1 |
| #define CONFIG_SETUP_MEMORY_TAGS 1 |
| #define CONFIG_INITRD_TAG 1 |
| |
| #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 |
| /* flash */ |
| #define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 |
| #define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ |
| |
| /* clocks */ |
| #define CONFIG_SYS_PLLAR_VAL 0x20483E05 /* 179.4048 MHz for PCK */ |
| #define CONFIG_SYS_PLLBR_VAL 0x104C3E0A /* 47.3088 MHz (for USB) */ |
| #define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Clock */ |
| |
| /* |
| * Size of malloc() pool |
| */ |
| |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 520*1024) |
| |
| /* |
| * sdram |
| */ |
| |
| #define CONFIG_NR_DRAM_BANKS 1 |
| |
| #define CONFIG_SYS_SDRAM_BASE 0x20000000 |
| #define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ |
| #define CONFIG_SYS_INIT_SP_ADDR 0x00204000 /* use internal SRAM */ |
| |
| #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE |
| #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ |
| CONFIG_SYS_SDRAM_SIZE - 0x00400000 - \ |
| CONFIG_SYS_MALLOC_LEN) |
| |
| #define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* PIOC as D16/D31 */ |
| #define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 |
| #define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 |
| #define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ |
| #define CONFIG_SYS_SDRC_CR_VAL 0x2188c159 /* set up the SDRAM */ |
| #define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */ |
| #define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */ |
| #define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */ |
| #define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ |
| #define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ |
| #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ |
| #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ |
| #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ |
| |
| /* |
| * Command line configuration |
| */ |
| |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_BMP |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_JFFS2 |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_NAND |
| #define CONFIG_CMD_PING |
| #define CONFIG_I2C_CMD_NO_FLAT |
| #define CONFIG_I2C_CMD_TREE |
| |
| #define CONFIG_SYS_LONGHELP |
| |
| /* |
| * Filesystems |
| */ |
| |
| #define CONFIG_JFFS2_NAND 1 |
| |
| #ifndef CONFIG_JFFS2_CMDLINE |
| #define CONFIG_JFFS2_DEV "nand0" |
| #define CONFIG_JFFS2_PART_OFFSET 0 |
| #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF |
| #else |
| #define MTDIDS_DEFAULT "nor0=0,nand0=1" |
| #define MTDPARTS_DEFAULT "mtdparts=" \ |
| "0:" \ |
| "384k(U-Boot)," \ |
| "128k(Env)," \ |
| "128k(Splash)," \ |
| "4M(Kernel)," \ |
| "-(FS)" \ |
| ";" \ |
| "1:" \ |
| "-(jffs2)" |
| #endif /* CONFIG_JFFS2_CMDLINE */ |
| |
| /* |
| * Hardware drivers |
| */ |
| |
| /* |
| * UART/CONSOLE |
| */ |
| |
| #define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 } |
| |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_ATMEL_USART |
| #define CONFIG_USART_BASE ATMEL_BASE_DBGU |
| #define CONFIG_USART_ID 0/* ignored in arm */ |
| |
| /* |
| * network |
| */ |
| |
| #define CONFIG_NET_RETRY_COUNT 10 |
| #define CONFIG_RESET_PHY_R 1 |
| |
| #define CONFIG_DRIVER_AT91EMAC 1 |
| #define CONFIG_DRIVER_AT91EMAC_QUIET 1 |
| #define CONFIG_SYS_RX_ETH_BUFFER 8 |
| #define CONFIG_MII 1 |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| /* |
| * I2C-Bus |
| */ |
| |
| #define CONFIG_SYS_I2C_SPEED 50000 |
| #define CONFIG_SYS_I2C_SLAVE 0 /* not used */ |
| |
| #ifndef CONFIG_HARD_I2C |
| #define CONFIG_SOFT_I2C |
| |
| /* Software I2C driver configuration */ |
| |
| #define AT91_PIN_SDA (1<<25) /* AT91C_PIO_PA25 */ |
| #define AT91_PIN_SCL (1<<26) /* AT91C_PIO_PA26 */ |
| |
| #define CONFIG_SYS_I2C_INIT_BOARD |
| |
| #define I2C_INIT i2c_init_board(); |
| #define I2C_ACTIVE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mddr); |
| #define I2C_TRISTATE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mder); |
| #define I2C_READ ((readl(&pio->pioa.pdsr) & ATMEL_PMX_AA_TWD) != 0) |
| #define I2C_SDA(bit) \ |
| if (bit) \ |
| writel(ATMEL_PMX_AA_TWD, &pio->pioa.sodr); \ |
| else \ |
| writel(ATMEL_PMX_AA_TWD, &pio->pioa.codr); |
| #define I2C_SCL(bit) \ |
| if (bit) \ |
| writel(ATMEL_PMX_AA_TWCK, &pio->pioa.sodr); \ |
| else \ |
| writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr); |
| |
| #define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED) |
| |
| #endif /* CONFIG_HARD_I2C */ |
| |
| /* I2C-RTC */ |
| |
| #ifdef CONFIG_CMD_DATE |
| #define CONFIG_RTC_DS1338 |
| #define CONFIG_SYS_I2C_RTC_ADDR 0x68 |
| #endif |
| |
| /* EEPROM */ |
| |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 |
| |
| /* FLASH organization */ |
| |
| /* NOR-FLASH */ |
| #define CONFIG_FLASH_SHOW_PROGRESS 45 |
| |
| #define CONFIG_FLASH_CFI_DRIVER 1 |
| |
| #define PHYS_FLASH_1 0x10000000 |
| #define PHYS_FLASH_SIZE 0x01000000 /* 16 megs main flash */ |
| #define CONFIG_SYS_FLASH_CFI 1 |
| #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT |
| |
| #define CONFIG_SYS_FLASH_PROTECTION 1 |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| #define CONFIG_SYS_MAX_FLASH_SECT 512 |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 6000 |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 2000 |
| |
| /* NAND */ |
| |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_SYS_NAND_BASE 0x40000000 |
| #define CONFIG_SYS_NAND_DBW_8 1 |
| |
| #define CONFIG_SYS_64BIT_VSPRINTF 1 |
| |
| /* Status LED's */ |
| |
| #define CONFIG_STATUS_LED 1 |
| #define CONFIG_BOARD_SPECIFIC_LED 1 |
| |
| #define STATUS_LED_BOOT 1 |
| #define STATUS_LED_ACTIVE 0 |
| |
| #define STATUS_LED_BIT 1 /* AT91C_PIO_PD0 green LED */ |
| #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) |
| #define STATUS_LED_STATE STATUS_LED_OFF /* BLINKING */ |
| #define STATUS_LED_BIT1 2 /* AT91C_PIO_PD1 red LED */ |
| #define STATUS_LED_STATE1 STATUS_LED_ON /* BLINKING */ |
| #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 4) |
| |
| #define CONFIG_VIDEO 1 |
| |
| /* Options */ |
| |
| #ifdef CONFIG_VIDEO |
| |
| #define CONFIG_VIDEO_VCXK 1 |
| |
| #define CONFIG_SPLASH_SCREEN 1 |
| |
| #define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 4 |
| #define CONFIG_SYS_VCXK_BASE 0x30000000 |
| |
| #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN (1<<3) |
| #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT piob |
| #define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR odr |
| |
| #define CONFIG_SYS_VCXK_ENABLE_PIN (1<<5) |
| #define CONFIG_SYS_VCXK_ENABLE_PORT piob |
| #define CONFIG_SYS_VCXK_ENABLE_DDR oer |
| |
| #define CONFIG_SYS_VCXK_REQUEST_PIN (1<<2) |
| #define CONFIG_SYS_VCXK_REQUEST_PORT piob |
| #define CONFIG_SYS_VCXK_REQUEST_DDR oer |
| |
| #define CONFIG_SYS_VCXK_INVERT_PIN (1<<4) |
| #define CONFIG_SYS_VCXK_INVERT_PORT piob |
| #define CONFIG_SYS_VCXK_INVERT_DDR oer |
| |
| #define CONFIG_SYS_VCXK_RESET_PIN (1<<6) |
| #define CONFIG_SYS_VCXK_RESET_PORT piob |
| #define CONFIG_SYS_VCXK_RESET_DDR oer |
| |
| #endif /* CONFIG_VIDEO */ |
| |
| /* Environment */ |
| |
| #define CONFIG_BOOTDELAY 5 |
| |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) |
| #define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */ |
| |
| #define CONFIG_BAUDRATE 115200 |
| |
| #define CONFIG_BOOTCOMMAND "run nfsboot" |
| |
| #define CONFIG_NFSBOOTCOMMAND \ |
| "dhcp $(copy_addr) uImage_cpux9k2;" \ |
| "run bootargsdefaults;" \ |
| "set bootargs $(bootargs) boot=nfs " \ |
| ";echo $(bootargs)" \ |
| ";bootm" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "displaywidth=256\0" \ |
| "displayheight=512\0" \ |
| "displaybsteps=1023\0" \ |
| "ubootaddr=10000000\0" \ |
| "splashimage=10080000\0" \ |
| "kerneladdr=100A0000\0" \ |
| "kernelsize=00400000\0" \ |
| "rootfsaddr=104A0000\0" \ |
| "copy_addr=21200000\0" \ |
| "rootfssize=00B60000\0" \ |
| "bootargsdefaults=set bootargs " \ |
| "console=ttyS0,115200 " \ |
| "video=vcxk_fb:xres:${displaywidth}," \ |
| "yres:${displayheight}," \ |
| "bres:${displaybsteps} " \ |
| "mem=62M " \ |
| "panic=10 " \ |
| "uboot=\\\"${ver}\\\" " \ |
| "\0" \ |
| "update_kernel=protect off $(kerneladdr) +$(kernelsize);" \ |
| "dhcp $(copy_addr) uImage_cpux9k2;" \ |
| "erase $(kerneladdr) +$(kernelsize);" \ |
| "cp.b $(fileaddr) $(kerneladdr) $(filesize);" \ |
| "protect on $(kerneladdr) +$(kernelsize)" \ |
| "\0" \ |
| "update_root=protect off $(rootfsaddr) +$(rootfssize);" \ |
| "dhcp $(copy_addr) rfs;" \ |
| "erase $(rootfsaddr) +$(rootfssize);" \ |
| "cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \ |
| "\0" \ |
| "update_uboot=protect off 10000000 1005FFFF;" \ |
| "dhcp $(copy_addr) u-boot_eb_cpux9k2;" \ |
| "erase 10000000 1005FFFF;" \ |
| "cp.b $(fileaddr) $(ubootaddr) $(filesize);" \ |
| "protect on 10000000 1005FFFF;reset\0" \ |
| "update_splash=protect off $(splashimage) +20000;" \ |
| "dhcp $(copy_addr) splash_eb_cpux9k2.bmp;" \ |
| "erase $(splashimage) +20000;" \ |
| "cp.b $(fileaddr) 10080000 $(filesize);" \ |
| "protect on $(splashimage) +20000;reset\0" \ |
| "emergency=run bootargsdefaults;" \ |
| "set bootargs $(bootargs) root=initramfs boot=emergency " \ |
| ";bootm $(kerneladdr)\0" \ |
| "netemergency=run bootargsdefaults;" \ |
| "dhcp $(copy_addr) uImage_cpux9k2;" \ |
| "set bootargs $(bootargs) root=initramfs boot=emergency " \ |
| ";bootm $(copy_addr)\0" \ |
| "norboot=run bootargsdefaults;" \ |
| "set bootargs $(bootargs) root=initramfs boot=local " \ |
| ";bootm $(kerneladdr)\0" \ |
| "nandboot=run bootargsdefaults;" \ |
| "set bootargs $(bootargs) root=initramfs boot=nand " \ |
| ";bootm $(kerneladdr)\0" \ |
| " " |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| #endif |
| |
| /* EOF */ |