| CONFIG_ARM=y |
| CONFIG_SKIP_LOWLEVEL_INIT=y |
| CONFIG_SYS_DCACHE_OFF=y |
| CONFIG_ARCH_CPU_INIT=y |
| CONFIG_ARCH_KIRKWOOD=y |
| CONFIG_SUPPORT_PASSING_ATAGS=y |
| CONFIG_CMDLINE_TAG=y |
| CONFIG_INITRD_TAG=y |
| CONFIG_SYS_KWD_CONFIG="board/Marvell/dreamplug/kwbimage.cfg" |
| CONFIG_TEXT_BASE=0x600000 |
| CONFIG_NR_DRAM_BANKS=2 |
| CONFIG_TARGET_DREAMPLUG=y |
| CONFIG_ENV_SIZE=0x1000 |
| CONFIG_ENV_OFFSET=0x100000 |
| CONFIG_ENV_SECT_SIZE=0x10000 |
| CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dreamplug" |
| CONFIG_IDENT_STRING="\nMarvell-DreamPlug" |
| CONFIG_SYS_LOAD_ADDR=0x800000 |
| CONFIG_ENV_ADDR=0x100000 |
| CONFIG_BOOTDELAY=3 |
| CONFIG_USE_BOOTCOMMAND=y |
| CONFIG_BOOTCOMMAND="setenv ethact ethernet-controller@72000; ${x_bootcmd_ethernet}; setenv ethact ethernet-controller@76000; ${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;" |
| CONFIG_USE_PREBOOT=y |
| # CONFIG_DISPLAY_BOARDINFO is not set |
| CONFIG_HUSH_PARSER=y |
| CONFIG_SYS_MAXARGS=32 |
| CONFIG_CMD_IDE=y |
| CONFIG_CMD_SATA=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_DHCP=y |
| CONFIG_CMD_MII=y |
| CONFIG_CMD_PING=y |
| CONFIG_CMD_EXT2=y |
| CONFIG_CMD_EXT4=y |
| CONFIG_CMD_FAT=y |
| CONFIG_ISO_PARTITION=y |
| CONFIG_OF_CONTROL=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_SPI_FLASH=y |
| CONFIG_ENV_SPI_MAX_HZ=50000000 |
| CONFIG_NET_RANDOM_ETHADDR=y |
| CONFIG_NETCONSOLE=y |
| CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y |
| CONFIG_SATA_MV=y |
| CONFIG_SYS_SATA_MAX_DEVICE=1 |
| CONFIG_SYS_ATA_STRIDE=4 |
| CONFIG_SYS_ATA_DATA_OFFSET=0x100 |
| CONFIG_SYS_ATA_REG_OFFSET=0x100 |
| CONFIG_SYS_ATA_ALT_OFFSET=0x100 |
| CONFIG_LBA48=y |
| # CONFIG_MMC is not set |
| CONFIG_MTD=y |
| CONFIG_DM_SPI_FLASH=y |
| CONFIG_SPI_FLASH_MACRONIX=y |
| CONFIG_PHY_MARVELL=y |
| CONFIG_MVGBE=y |
| CONFIG_MII=y |
| CONFIG_DM_RTC=y |
| CONFIG_RTC_MV=y |
| CONFIG_SPI=y |
| CONFIG_DM_SPI=y |
| CONFIG_KIRKWOOD_SPI=y |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_STORAGE=y |