| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2001-2008 |
| * Copyright 2020 NXP |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * Keith Outwater, keith_outwater@mvis.com` |
| */ |
| |
| /* |
| * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim) |
| * DS1337 Real Time Clock (RTC). |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <dm.h> |
| #include <rtc.h> |
| #include <i2c.h> |
| |
| /* |
| * RTC register addresses |
| */ |
| #if defined CONFIG_RTC_DS1337 |
| #define RTC_SEC_REG_ADDR 0x0 |
| #define RTC_MIN_REG_ADDR 0x1 |
| #define RTC_HR_REG_ADDR 0x2 |
| #define RTC_DAY_REG_ADDR 0x3 |
| #define RTC_DATE_REG_ADDR 0x4 |
| #define RTC_MON_REG_ADDR 0x5 |
| #define RTC_YR_REG_ADDR 0x6 |
| #define RTC_CTL_REG_ADDR 0x0e |
| #define RTC_STAT_REG_ADDR 0x0f |
| #define RTC_TC_REG_ADDR 0x10 |
| #elif defined CONFIG_RTC_DS1388 |
| #define RTC_SEC_REG_ADDR 0x1 |
| #define RTC_MIN_REG_ADDR 0x2 |
| #define RTC_HR_REG_ADDR 0x3 |
| #define RTC_DAY_REG_ADDR 0x4 |
| #define RTC_DATE_REG_ADDR 0x5 |
| #define RTC_MON_REG_ADDR 0x6 |
| #define RTC_YR_REG_ADDR 0x7 |
| #define RTC_CTL_REG_ADDR 0x0c |
| #define RTC_STAT_REG_ADDR 0x0b |
| #define RTC_TC_REG_ADDR 0x0a |
| #endif |
| |
| /* |
| * RTC control register bits |
| */ |
| #define RTC_CTL_BIT_A1IE 0x1 /* Alarm 1 interrupt enable */ |
| #define RTC_CTL_BIT_A2IE 0x2 /* Alarm 2 interrupt enable */ |
| #define RTC_CTL_BIT_INTCN 0x4 /* Interrupt control */ |
| #define RTC_CTL_BIT_RS1 0x8 /* Rate select 1 */ |
| #define RTC_CTL_BIT_RS2 0x10 /* Rate select 2 */ |
| #define RTC_CTL_BIT_DOSC 0x80 /* Disable Oscillator */ |
| |
| /* |
| * RTC status register bits |
| */ |
| #define RTC_STAT_BIT_A1F 0x1 /* Alarm 1 flag */ |
| #define RTC_STAT_BIT_A2F 0x2 /* Alarm 2 flag */ |
| #define RTC_STAT_BIT_OSF 0x80 /* Oscillator stop flag */ |
| |
| |
| #if !CONFIG_IS_ENABLED(DM_RTC) |
| static uchar rtc_read (uchar reg); |
| static void rtc_write (uchar reg, uchar val); |
| |
| /* |
| * Get the current time from the RTC |
| */ |
| int rtc_get (struct rtc_time *tmp) |
| { |
| int rel = 0; |
| uchar sec, min, hour, mday, wday, mon_cent, year, control, status; |
| |
| control = rtc_read (RTC_CTL_REG_ADDR); |
| status = rtc_read (RTC_STAT_REG_ADDR); |
| sec = rtc_read (RTC_SEC_REG_ADDR); |
| min = rtc_read (RTC_MIN_REG_ADDR); |
| hour = rtc_read (RTC_HR_REG_ADDR); |
| wday = rtc_read (RTC_DAY_REG_ADDR); |
| mday = rtc_read (RTC_DATE_REG_ADDR); |
| mon_cent = rtc_read (RTC_MON_REG_ADDR); |
| year = rtc_read (RTC_YR_REG_ADDR); |
| |
| /* No century bit, assume year 2000 */ |
| #ifdef CONFIG_RTC_DS1388 |
| mon_cent |= 0x80; |
| #endif |
| |
| debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x " |
| "hr: %02x min: %02x sec: %02x control: %02x status: %02x\n", |
| year, mon_cent, mday, wday, hour, min, sec, control, status); |
| |
| if (status & RTC_STAT_BIT_OSF) { |
| printf ("### Warning: RTC oscillator has stopped\n"); |
| /* clear the OSF flag */ |
| rtc_write (RTC_STAT_REG_ADDR, |
| rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF); |
| rel = -1; |
| } |
| |
| tmp->tm_sec = bcd2bin (sec & 0x7F); |
| tmp->tm_min = bcd2bin (min & 0x7F); |
| tmp->tm_hour = bcd2bin (hour & 0x3F); |
| tmp->tm_mday = bcd2bin (mday & 0x3F); |
| tmp->tm_mon = bcd2bin (mon_cent & 0x1F); |
| tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900); |
| tmp->tm_wday = bcd2bin ((wday - 1) & 0x07); |
| tmp->tm_yday = 0; |
| tmp->tm_isdst= 0; |
| |
| debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", |
| tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, |
| tmp->tm_hour, tmp->tm_min, tmp->tm_sec); |
| |
| return rel; |
| } |
| |
| |
| /* |
| * Set the RTC |
| */ |
| int rtc_set (struct rtc_time *tmp) |
| { |
| uchar century; |
| |
| debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", |
| tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, |
| tmp->tm_hour, tmp->tm_min, tmp->tm_sec); |
| |
| rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100)); |
| |
| century = (tmp->tm_year >= 2000) ? 0x80 : 0; |
| rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century); |
| |
| rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1)); |
| rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday)); |
| rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour)); |
| rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min)); |
| rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec)); |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Reset the RTC. We also enable the oscillator output on the |
| * SQW/INTB* pin and program it for 32,768 Hz output. Note that |
| * according to the datasheet, turning on the square wave output |
| * increases the current drain on the backup battery from about |
| * 600 nA to 2uA. Define CONFIG_RTC_DS1337_NOOSC if you wish to turn |
| * off the OSC output. |
| */ |
| |
| #ifdef CONFIG_RTC_DS1337_NOOSC |
| #define RTC_DS1337_RESET_VAL \ |
| (RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2) |
| #else |
| #define RTC_DS1337_RESET_VAL (RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2) |
| #endif |
| void rtc_reset (void) |
| { |
| #ifdef CONFIG_RTC_DS1337 |
| rtc_write (RTC_CTL_REG_ADDR, RTC_DS1337_RESET_VAL); |
| #elif defined CONFIG_RTC_DS1388 |
| rtc_write(RTC_CTL_REG_ADDR, 0x0); /* hw default */ |
| #endif |
| #ifdef CONFIG_RTC_DS1339_TCR_VAL |
| rtc_write (RTC_TC_REG_ADDR, CONFIG_RTC_DS1339_TCR_VAL); |
| #endif |
| #ifdef CONFIG_RTC_DS1388_TCR_VAL |
| rtc_write(RTC_TC_REG_ADDR, CONFIG_RTC_DS1388_TCR_VAL); |
| #endif |
| } |
| |
| |
| /* |
| * Helper functions |
| */ |
| |
| static |
| uchar rtc_read (uchar reg) |
| { |
| return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg)); |
| } |
| |
| |
| static void rtc_write (uchar reg, uchar val) |
| { |
| i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); |
| } |
| #else |
| static uchar rtc_read(struct udevice *dev, uchar reg) |
| { |
| return dm_i2c_reg_read(dev, reg); |
| } |
| |
| static void rtc_write(struct udevice *dev, uchar reg, uchar val) |
| { |
| dm_i2c_reg_write(dev, reg, val); |
| } |
| |
| static int ds1337_rtc_get(struct udevice *dev, struct rtc_time *tmp) |
| { |
| int rel = 0; |
| uchar sec, min, hour, mday, wday, mon_cent, year, control, status; |
| |
| control = rtc_read(dev, RTC_CTL_REG_ADDR); |
| status = rtc_read(dev, RTC_STAT_REG_ADDR); |
| sec = rtc_read(dev, RTC_SEC_REG_ADDR); |
| min = rtc_read(dev, RTC_MIN_REG_ADDR); |
| hour = rtc_read(dev, RTC_HR_REG_ADDR); |
| wday = rtc_read(dev, RTC_DAY_REG_ADDR); |
| mday = rtc_read(dev, RTC_DATE_REG_ADDR); |
| mon_cent = rtc_read(dev, RTC_MON_REG_ADDR); |
| year = rtc_read(dev, RTC_YR_REG_ADDR); |
| |
| /* No century bit, assume year 2000 */ |
| #ifdef CONFIG_RTC_DS1388 |
| mon_cent |= 0x80; |
| #endif |
| |
| debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x\n", |
| year, mon_cent, mday, wday); |
| debug("hr: %02x min: %02x sec: %02x control: %02x status: %02x\n", |
| hour, min, sec, control, status); |
| |
| if (status & RTC_STAT_BIT_OSF) { |
| printf("### Warning: RTC oscillator has stopped\n"); |
| /* clear the OSF flag */ |
| rtc_write(dev, RTC_STAT_REG_ADDR, |
| rtc_read(dev, RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF); |
| rel = -1; |
| } |
| |
| tmp->tm_sec = bcd2bin(sec & 0x7F); |
| tmp->tm_min = bcd2bin(min & 0x7F); |
| tmp->tm_hour = bcd2bin(hour & 0x3F); |
| tmp->tm_mday = bcd2bin(mday & 0x3F); |
| tmp->tm_mon = bcd2bin(mon_cent & 0x1F); |
| tmp->tm_year = bcd2bin(year) + ((mon_cent & 0x80) ? 2000 : 1900); |
| tmp->tm_wday = bcd2bin((wday - 1) & 0x07); |
| tmp->tm_yday = 0; |
| tmp->tm_isdst = 0; |
| |
| debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", |
| tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, |
| tmp->tm_hour, tmp->tm_min, tmp->tm_sec); |
| |
| return rel; |
| } |
| |
| static int ds1337_rtc_set(struct udevice *dev, const struct rtc_time *tmp) |
| { |
| uchar century; |
| |
| debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", |
| tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, |
| tmp->tm_hour, tmp->tm_min, tmp->tm_sec); |
| |
| rtc_write(dev, RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100)); |
| |
| century = (tmp->tm_year >= 2000) ? 0x80 : 0; |
| rtc_write(dev, RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon) | century); |
| |
| rtc_write(dev, RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1)); |
| rtc_write(dev, RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday)); |
| rtc_write(dev, RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour)); |
| rtc_write(dev, RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min)); |
| rtc_write(dev, RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec)); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_RTC_DS1337_NOOSC |
| #define RTC_DS1337_RESET_VAL \ |
| (RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2) |
| #else |
| #define RTC_DS1337_RESET_VAL (RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2) |
| #endif |
| static int ds1337_rtc_reset(struct udevice *dev) |
| { |
| #ifdef CONFIG_RTC_DS1337 |
| rtc_write(dev, RTC_CTL_REG_ADDR, RTC_DS1337_RESET_VAL); |
| #elif defined CONFIG_RTC_DS1388 |
| rtc_write(dev, RTC_CTL_REG_ADDR, 0x0); /* hw default */ |
| #endif |
| #ifdef CONFIG_RTC_DS1339_TCR_VAL |
| rtc_write(dev, RTC_TC_REG_ADDR, CONFIG_RTC_DS1339_TCR_VAL); |
| #endif |
| #ifdef CONFIG_RTC_DS1388_TCR_VAL |
| rtc_write(dev, RTC_TC_REG_ADDR, CONFIG_RTC_DS1388_TCR_VAL); |
| #endif |
| return 0; |
| } |
| |
| static const struct rtc_ops ds1337_rtc_ops = { |
| .get = ds1337_rtc_get, |
| .set = ds1337_rtc_set, |
| .reset = ds1337_rtc_reset, |
| }; |
| |
| static const struct udevice_id ds1337_rtc_ids[] = { |
| { .compatible = "ds1337" }, |
| { .compatible = "ds1338" }, |
| { .compatible = "ds1338" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rtc_ds1337) = { |
| .name = "rtc-ds1337", |
| .id = UCLASS_RTC, |
| .of_match = ds1337_rtc_ids, |
| .ops = &ds1337_rtc_ops, |
| }; |
| #endif |