blob: bb2ce33132e5aca890ac7857e83d7bdabb67bf8a [file] [log] [blame]
if ARCH_MX6
config MX6
bool
default y
select ARM_ERRATA_743622 if !MX6UL
select ARM_ERRATA_751472 if !MX6UL
select ARM_ERRATA_761320 if !MX6UL
select ARM_ERRATA_794072 if !MX6UL
imply CMD_FUSE
config MX6D
bool
config MX6DL
bool
config MX6Q
bool
config MX6QDL
bool
config MX6S
bool
config MX6SL
bool
config MX6SX
select ROM_UNIFIED_SECTIONS
bool
imply ENV_IS_IN_MMC
config MX6SLL
select ROM_UNIFIED_SECTIONS
bool
config MX6UL
select SYS_L2CACHE_OFF
select ROM_UNIFIED_SECTIONS
bool
config MX6UL_LITESOM
bool
select MX6UL
select DM
select DM_THERMAL
select SUPPORT_SPL
config MX6UL_OPOS6UL
bool
select MX6UL
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
config MX6ULL
bool
select MX6UL
config MX6_DDRCAL
bool "Include dynamic DDR calibration routines"
depends on SPL
default n
help
Say "Y" if your board uses dynamic (per-boot) DDR calibration.
If unsure, say N.
choice
prompt "MX6 board select"
optional
config TARGET_ADVANTECH_DMS_BA16
bool "Advantech dms-ba16"
select BOARD_LATE_INIT
select MX6Q
imply CMD_SATA
config TARGET_APALIS_IMX6
bool "Toradex Apalis iMX6 board"
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
select DM_SERIAL
select DM_THERMAL
imply CMD_SATA
config TARGET_ARISTAINETOS
bool "aristainetos"
config TARGET_ARISTAINETOS2
bool "aristainetos2"
select BOARD_LATE_INIT
config TARGET_ARISTAINETOS2B
bool "Support aristainetos2-revB"
select BOARD_LATE_INIT
config TARGET_CGTQMX6EVAL
bool "cgtqmx6eval"
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
select DM_THERMAL
config TARGET_CM_FX6
bool "CM-FX6"
select SUPPORT_SPL
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_COLIBRI_IMX6
bool "Toradex Colibri iMX6 board"
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
select DM_SERIAL
select DM_THERMAL
config TARGET_EMBESTMX6BOARDS
bool "embestmx6boards"
select BOARD_LATE_INIT
config TARGET_GE_B450V3
bool "General Electric B450v3"
select BOARD_LATE_INIT
select MX6Q
config TARGET_GE_B650V3
bool "General Electric B650v3"
select BOARD_LATE_INIT
select MX6Q
config TARGET_GE_B850V3
bool "General Electric B850v3"
select BOARD_LATE_INIT
select MX6Q
config TARGET_GW_VENTANA
bool "gw_ventana"
select SUPPORT_SPL
imply CMD_SATA
config TARGET_KOSAGI_NOVENA
bool "Kosagi Novena"
select BOARD_LATE_INIT
select SUPPORT_SPL
config TARGET_MCCMON6
bool "mccmon6"
select SUPPORT_SPL
config TARGET_MX6CUBOXI
bool "Solid-run mx6 boards"
select BOARD_LATE_INIT
select SUPPORT_SPL
config TARGET_MX6LOGICPD
bool "Logic PD i.MX6 SOM"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_PMIC
select DM_REGULATOR
select OF_CONTROL
config TARGET_MX6QARM2
bool "mx6qarm2"
config TARGET_MX6Q_ICORE
bool "Support Engicam i.Core"
select BOARD_LATE_INIT
select MX6QDL
select OF_CONTROL
select SPL_OF_LIBFDT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
select SPL_LOAD_FIT
config TARGET_MX6Q_ICORE_RQS
bool "Support Engicam i.Core RQS"
select BOARD_LATE_INIT
select MX6QDL
select OF_CONTROL
select SPL_OF_LIBFDT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
select SPL_LOAD_FIT
config TARGET_MX6SABREAUTO
bool "mx6sabreauto"
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
select DM_THERMAL
select BOARD_EARLY_INIT_F
config TARGET_MX6SABRESD
bool "mx6sabresd"
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
select DM_THERMAL
select BOARD_EARLY_INIT_F
config TARGET_MX6SLEVK
bool "mx6slevk"
select SUPPORT_SPL
config TARGET_MX6SLLEVK
bool "mx6sll evk"
select BOARD_LATE_INIT
select MX6SLL
select DM
select DM_THERMAL
config TARGET_MX6SXSABRESD
bool "mx6sxsabresd"
select MX6SX
select SUPPORT_SPL
select DM
select DM_THERMAL
select BOARD_EARLY_INIT_F
config TARGET_MX6SXSABREAUTO
bool "mx6sxsabreauto"
select BOARD_LATE_INIT
select MX6SX
select DM
select DM_THERMAL
select BOARD_EARLY_INIT_F
config TARGET_MX6UL_9X9_EVK
bool "mx6ul_9x9_evk"
select BOARD_LATE_INIT
select MX6UL
select DM
select DM_THERMAL
select SUPPORT_SPL
config TARGET_MX6UL_14X14_EVK
select BOARD_LATE_INIT
bool "mx6ul_14x14_evk"
select MX6UL
select DM
select DM_THERMAL
select SUPPORT_SPL
config TARGET_MX6UL_GEAM
bool "Support Engicam GEAM6UL"
select BOARD_LATE_INIT
select MX6UL
select OF_CONTROL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
config TARGET_MX6UL_ISIOT
bool "Support Engicam Is.IoT MX6UL"
select BOARD_LATE_INIT
select MX6UL
select OF_CONTROL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
config TARGET_MX6ULL_14X14_EVK
bool "Support mx6ull_14x14_evk"
select BOARD_LATE_INIT
select MX6ULL
select DM
select DM_THERMAL
config TARGET_NITROGEN6X
bool "nitrogen6x"
config TARGET_OPOS6ULDEV
bool "Armadeus OPOS6ULDev board"
select MX6UL_OPOS6UL
config TARGET_OT1200
bool "Bachmann OT1200"
select SUPPORT_SPL
imply CMD_SATA
config TARGET_PICO_IMX6UL
bool "PICO-IMX6UL-EMMC"
select MX6UL
config TARGET_LITEBOARD
bool "Grinn liteBoard (i.MX6UL)"
select BOARD_LATE_INIT
select MX6UL_LITESOM
config TARGET_PLATINUM_PICON
bool "platinum-picon"
select SUPPORT_SPL
config TARGET_PLATINUM_TITANIUM
bool "platinum-titanium"
select SUPPORT_SPL
config TARGET_PCM058
bool "Phytec PCM058 i.MX6 Quad"
select BOARD_LATE_INIT
select SUPPORT_SPL
config TARGET_SECOMX6
bool "secomx6 boards"
config TARGET_TBS2910
bool "TBS2910 Matrix ARM mini PC"
config TARGET_TITANIUM
bool "titanium"
config TARGET_TQMA6
bool "TQ Systems TQMa6 board"
select BOARD_LATE_INIT
config TARGET_UDOO
bool "udoo"
select BOARD_LATE_INIT
select SUPPORT_SPL
config TARGET_UDOO_NEO
bool "UDOO Neo"
select BOARD_LATE_INIT
select SUPPORT_SPL
select MX6SX
select DM
select DM_THERMAL
config TARGET_SAMTEC_VINING_2000
bool "samtec VIN|ING 2000"
select BOARD_LATE_INIT
select MX6SX
select DM
select DM_THERMAL
config TARGET_WANDBOARD
bool "wandboard"
select BOARD_LATE_INIT
select SUPPORT_SPL
config TARGET_WARP
bool "WaRP"
select BOARD_LATE_INIT
config TARGET_XPRESS
bool "CCV xPress"
select BOARD_LATE_INIT
select MX6UL
select DM
select DM_THERMAL
select SUPPORT_SPL
config TARGET_ZC5202
bool "zc5202"
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
select DM_THERMAL
config TARGET_ZC5601
bool "zc5601"
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
select DM_THERMAL
endchoice
config SYS_SOC
default "mx6"
source "board/ge/bx50v3/Kconfig"
source "board/advantech/dms-ba16/Kconfig"
source "board/aristainetos/Kconfig"
source "board/armadeus/opos6uldev/Kconfig"
source "board/bachmann/ot1200/Kconfig"
source "board/barco/platinum/Kconfig"
source "board/barco/titanium/Kconfig"
source "board/boundary/nitrogen6x/Kconfig"
source "board/ccv/xpress/Kconfig"
source "board/compulab/cm_fx6/Kconfig"
source "board/congatec/cgtqmx6eval/Kconfig"
source "board/el/el6x/Kconfig"
source "board/embest/mx6boards/Kconfig"
source "board/engicam/geam6ul/Kconfig"
source "board/engicam/icorem6/Kconfig"
source "board/engicam/icorem6_rqs/Kconfig"
source "board/engicam/isiotmx6ul/Kconfig"
source "board/freescale/mx6qarm2/Kconfig"
source "board/freescale/mx6sabreauto/Kconfig"
source "board/freescale/mx6sabresd/Kconfig"
source "board/freescale/mx6slevk/Kconfig"
source "board/freescale/mx6sllevk/Kconfig"
source "board/freescale/mx6sxsabresd/Kconfig"
source "board/freescale/mx6sxsabreauto/Kconfig"
source "board/freescale/mx6ul_14x14_evk/Kconfig"
source "board/freescale/mx6ullevk/Kconfig"
source "board/grinn/liteboard/Kconfig"
source "board/phytec/pcm058/Kconfig"
source "board/gateworks/gw_ventana/Kconfig"
source "board/kosagi/novena/Kconfig"
source "board/samtec/vining_2000/Kconfig"
source "board/liebherr/mccmon6/Kconfig"
source "board/logicpd/imx6/Kconfig"
source "board/seco/Kconfig"
source "board/solidrun/mx6cuboxi/Kconfig"
source "board/technexion/pico-imx6ul/Kconfig"
source "board/tbs/tbs2910/Kconfig"
source "board/tqc/tqma6/Kconfig"
source "board/toradex/apalis_imx6/Kconfig"
source "board/toradex/colibri_imx6/Kconfig"
source "board/udoo/Kconfig"
source "board/udoo/neo/Kconfig"
source "board/wandboard/Kconfig"
source "board/warp/Kconfig"
endif