blob: d40d9716e544095bf8d15bc9bcb9b59d2c40bea6 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Hitachi Power Grids TEGR1 Device Tree Source
*
* Copyright (C) 2020 Heiko Schocher <hs@denx.de>
*
*/
/dts-v1/;
/ {
model = "KMTEGR1";
compatible = "hitachi,kmpbec8309";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet_zynq;
ethernet1 = &enet_piggy2;
serial0 = &serial0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8309@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <16384>; // L1, 16K
i-cache-size = <16384>; // L1, 16K
timebase-frequency = <66000000>;
bus-frequency = <264000000>;
clock-frequency = <264000000>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
soc: soc8309@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <264000000>;
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl,mpc8313-i2c","fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
clock-frequency = <400000>;
mux@70 {
compatible = "nxp,pca9547";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
/*
* Inventory EEPROM of the
* unit itself
*/
ivm@50 {
label = "MAIN_CTRL";
compatible = "dummy";
reg = <0x50>;
};
};
i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
/* Temperature sensors */
temp@48 {
label = "front";
compatible = "national,lm75";
reg = <0x48>;
};
temp@49 {
label = "board";
compatible = "national,lm75";
reg = <0x49>;
};
temp@4a {
label = "power";
compatible = "national,lm75";
reg = <0x4a>;
};
temp@4b {
label = "bottom";
compatible = "national,lm75";
reg = <0x4b>;
};
};
i2c@6 {
reg = <6>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@5 {
reg = <5>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@7 {
reg = <7>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <264000000>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8309-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8309-dma-channel",
"fsl,elo-dma-channel";
reg = <0 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8309-dma-channel",
"fsl,elo-dma-channel";
reg = <0x80 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8309-dma-channel",
"fsl,elo-dma-channel";
reg = <0x100 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8309-dma-channel",
"fsl,elo-dma-channel";
reg = <0x180 0x28>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
};
ipic: pic@700 {
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "fsl,pq2pro-pic", "fsl,ipic";
interrupt-controller;
reg = <0x700 0x100>;
device_type = "ipic";
};
gpio1: gpio-controller@c00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8309-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8309-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
spi@7000 {
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x7000 0x1000>;
interrupts = <16 0x8>;
interrupt-parent = <&ipic>;
mode = "cpu";
#address-cells = <1>;
#size-cells = <0>;
/* GPIO_15 chipselect for ZYNQ flash */
gpios = <&gpio1 15 0>;
zynq_flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80";
reg = <0>;
spi-max-frequency = <4000000>;
m25p,fast-read;
partition@0 {
label = "bootloader";
reg = <0x0 0x01000000>;
};
};
};
};
qe: qe@e0100000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
ranges = <0x0 0xe0100000 0x00100000>;
reg = <0xe0100000 0x480>;
brg-frequency = <0>;
bus-frequency = <396000000>;
fsl,qe-num-snums = <32>;
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x00010000 0x00004000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x4000>;
};
};
/* ZYNQ (UCC1, MDIO 0x10, MII) */
enet_zynq: ethernet@2000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
/*id=0, full-dup, 100M, no-pause, no-asym_p*/
fixed-link = <0 1 100 0 0>;
rx-clock-name = "clk9";
tx-clock-name = "clk10";
phy-connection-type = "mii";
};
/* Piggy2 (UCC3, MDIO 0x00, RMII) */
enet_piggy2: ucc@2200 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <3>;
reg = <0x2200 0x200>;
interrupts = <34>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk12";
phy-handle = <&phy_piggy2>;
phy-connection-type = "rmii";
};
mdio@2320 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2320 0x38>;
compatible = "fsl,ucc-mdio";
/* Piggy2 (UCC3, MDIO 0x00, RMII) */
phy_piggy2: ethernet-phy@0 {
reg = <0x0>;
device_type = "ethernet-phy";
};
/* Explicitly set the tbi-phy to a non-zero address
* so that it does not conflict with phy_piggy2 that
* is unfortunately at address 0
*/
tbi1: tbi-phy@1 {
reg = <0x1>;
device_type = "tbi-phy";
};
};
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
big-endian;
interrupts = <32 8 33 8>;
interrupt-parent = <&ipic>;
};
bootcount@0x13ff8 {
device_type = "bootcount";
compatible = "u-boot,bootcount";
reg = <0x13ff8 0x08>;
};
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8309-localbus", "fsl,pq2pro-localbus",
"simple-bus";
reg = <0xe0005000 0xd8>;
ranges = <0 0 0xf0000000 0x04000000
1 0 0xe8000000 0x01000000
2 0 0xe0000000 0x10000000
3 0 0xb0000000 0x10000000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0x00000000 0x04000000>;
bank-width = <2>;
nornand = "nor";
#address-cells = <1>;
#size-cells = <1>;
use-advanced-sector-protection;
partition@0 { /* 768KB */
label = "u-boot";
reg = <0 0xc0000>;
};
partition@c0000 { /* 256KB */
label = "qe-fw";
reg = <0xc0000 0x40000>;
};
partition@100000 { /* 128KB */
label = "env";
reg = <0x100000 0x20000>;
};
partition@120000 { /* 128KB */
label = "envred";
reg = <0x120000 0x20000>;
};
partition@140000 { /* 64256KB */
label = "ubi0";
reg = <0x140000 0x3EC0000>;
};
};
};
};
#include "km8309-uboot.dtsi"