| /* |
| * (C) Copyright 2012 SAMSUNG Electronics |
| * Jaehoon Chung <jh80.chung@samsung.com> |
| * Rajeshawari Shinde <rajeshwari.s@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <bouncebuf.h> |
| #include <common.h> |
| #include <errno.h> |
| #include <malloc.h> |
| #include <memalign.h> |
| #include <mmc.h> |
| #include <dwmmc.h> |
| #include <asm-generic/errno.h> |
| |
| #define PAGE_SIZE 4096 |
| |
| static int dwmci_wait_reset(struct dwmci_host *host, u32 value) |
| { |
| unsigned long timeout = 1000; |
| u32 ctrl; |
| |
| dwmci_writel(host, DWMCI_CTRL, value); |
| |
| while (timeout--) { |
| ctrl = dwmci_readl(host, DWMCI_CTRL); |
| if (!(ctrl & DWMCI_RESET_ALL)) |
| return 1; |
| } |
| return 0; |
| } |
| |
| static void dwmci_set_idma_desc(struct dwmci_idmac *idmac, |
| u32 desc0, u32 desc1, u32 desc2) |
| { |
| struct dwmci_idmac *desc = idmac; |
| |
| desc->flags = desc0; |
| desc->cnt = desc1; |
| desc->addr = desc2; |
| desc->next_addr = (ulong)desc + sizeof(struct dwmci_idmac); |
| } |
| |
| static void dwmci_prepare_data(struct dwmci_host *host, |
| struct mmc_data *data, |
| struct dwmci_idmac *cur_idmac, |
| void *bounce_buffer) |
| { |
| unsigned long ctrl; |
| unsigned int i = 0, flags, cnt, blk_cnt; |
| ulong data_start, data_end; |
| |
| |
| blk_cnt = data->blocks; |
| |
| dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET); |
| |
| data_start = (ulong)cur_idmac; |
| dwmci_writel(host, DWMCI_DBADDR, (ulong)cur_idmac); |
| |
| do { |
| flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ; |
| flags |= (i == 0) ? DWMCI_IDMAC_FS : 0; |
| if (blk_cnt <= 8) { |
| flags |= DWMCI_IDMAC_LD; |
| cnt = data->blocksize * blk_cnt; |
| } else |
| cnt = data->blocksize * 8; |
| |
| dwmci_set_idma_desc(cur_idmac, flags, cnt, |
| (ulong)bounce_buffer + (i * PAGE_SIZE)); |
| |
| if (blk_cnt <= 8) |
| break; |
| blk_cnt -= 8; |
| cur_idmac++; |
| i++; |
| } while(1); |
| |
| data_end = (ulong)cur_idmac; |
| flush_dcache_range(data_start, data_end + ARCH_DMA_MINALIGN); |
| |
| ctrl = dwmci_readl(host, DWMCI_CTRL); |
| ctrl |= DWMCI_IDMAC_EN | DWMCI_DMA_EN; |
| dwmci_writel(host, DWMCI_CTRL, ctrl); |
| |
| ctrl = dwmci_readl(host, DWMCI_BMOD); |
| ctrl |= DWMCI_BMOD_IDMAC_FB | DWMCI_BMOD_IDMAC_EN; |
| dwmci_writel(host, DWMCI_BMOD, ctrl); |
| |
| dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize); |
| dwmci_writel(host, DWMCI_BYTCNT, data->blocksize * data->blocks); |
| } |
| |
| static int dwmci_data_transfer(struct dwmci_host *host, struct mmc_data *data) |
| { |
| int ret = 0; |
| u32 timeout = 240000; |
| u32 mask, size, i, len = 0; |
| u32 *buf = NULL; |
| ulong start = get_timer(0); |
| u32 fifo_depth = (((host->fifoth_val & RX_WMARK_MASK) >> |
| RX_WMARK_SHIFT) + 1) * 2; |
| |
| size = data->blocksize * data->blocks / 4; |
| if (data->flags == MMC_DATA_READ) |
| buf = (unsigned int *)data->dest; |
| else |
| buf = (unsigned int *)data->src; |
| |
| for (;;) { |
| mask = dwmci_readl(host, DWMCI_RINTSTS); |
| /* Error during data transfer. */ |
| if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) { |
| debug("%s: DATA ERROR!\n", __func__); |
| ret = -EINVAL; |
| break; |
| } |
| |
| if (host->fifo_mode && size) { |
| if (data->flags == MMC_DATA_READ) { |
| if ((dwmci_readl(host, DWMCI_RINTSTS) & |
| DWMCI_INTMSK_RXDR)) { |
| len = dwmci_readl(host, DWMCI_STATUS); |
| len = (len >> DWMCI_FIFO_SHIFT) & |
| DWMCI_FIFO_MASK; |
| for (i = 0; i < len; i++) |
| *buf++ = |
| dwmci_readl(host, DWMCI_DATA); |
| dwmci_writel(host, DWMCI_RINTSTS, |
| DWMCI_INTMSK_RXDR); |
| } |
| } else { |
| if ((dwmci_readl(host, DWMCI_RINTSTS) & |
| DWMCI_INTMSK_TXDR)) { |
| len = dwmci_readl(host, DWMCI_STATUS); |
| len = fifo_depth - ((len >> |
| DWMCI_FIFO_SHIFT) & |
| DWMCI_FIFO_MASK); |
| for (i = 0; i < len; i++) |
| dwmci_writel(host, DWMCI_DATA, |
| *buf++); |
| dwmci_writel(host, DWMCI_RINTSTS, |
| DWMCI_INTMSK_TXDR); |
| } |
| } |
| size = size > len ? (size - len) : 0; |
| } |
| |
| /* Data arrived correctly. */ |
| if (mask & DWMCI_INTMSK_DTO) { |
| ret = 0; |
| break; |
| } |
| |
| /* Check for timeout. */ |
| if (get_timer(start) > timeout) { |
| debug("%s: Timeout waiting for data!\n", |
| __func__); |
| ret = TIMEOUT; |
| break; |
| } |
| } |
| |
| dwmci_writel(host, DWMCI_RINTSTS, mask); |
| |
| return ret; |
| } |
| |
| static int dwmci_set_transfer_mode(struct dwmci_host *host, |
| struct mmc_data *data) |
| { |
| unsigned long mode; |
| |
| mode = DWMCI_CMD_DATA_EXP; |
| if (data->flags & MMC_DATA_WRITE) |
| mode |= DWMCI_CMD_RW; |
| |
| return mode; |
| } |
| |
| #ifdef CONFIG_DM_MMC_OPS |
| static int dwmci_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| struct mmc *mmc = mmc_get_mmc_dev(dev); |
| #else |
| static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| #endif |
| struct dwmci_host *host = mmc->priv; |
| ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac, |
| data ? DIV_ROUND_UP(data->blocks, 8) : 0); |
| int ret = 0, flags = 0, i; |
| unsigned int timeout = 500; |
| u32 retry = 100000; |
| u32 mask, ctrl; |
| ulong start = get_timer(0); |
| struct bounce_buffer bbstate; |
| |
| while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) { |
| if (get_timer(start) > timeout) { |
| debug("%s: Timeout on data busy\n", __func__); |
| return TIMEOUT; |
| } |
| } |
| |
| dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL); |
| |
| if (data) { |
| if (host->fifo_mode) { |
| dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize); |
| dwmci_writel(host, DWMCI_BYTCNT, |
| data->blocksize * data->blocks); |
| dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET); |
| } else { |
| if (data->flags == MMC_DATA_READ) { |
| bounce_buffer_start(&bbstate, (void*)data->dest, |
| data->blocksize * |
| data->blocks, GEN_BB_WRITE); |
| } else { |
| bounce_buffer_start(&bbstate, (void*)data->src, |
| data->blocksize * |
| data->blocks, GEN_BB_READ); |
| } |
| dwmci_prepare_data(host, data, cur_idmac, |
| bbstate.bounce_buffer); |
| } |
| } |
| |
| dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg); |
| |
| if (data) |
| flags = dwmci_set_transfer_mode(host, data); |
| |
| if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY)) |
| return -1; |
| |
| if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) |
| flags |= DWMCI_CMD_ABORT_STOP; |
| else |
| flags |= DWMCI_CMD_PRV_DAT_WAIT; |
| |
| if (cmd->resp_type & MMC_RSP_PRESENT) { |
| flags |= DWMCI_CMD_RESP_EXP; |
| if (cmd->resp_type & MMC_RSP_136) |
| flags |= DWMCI_CMD_RESP_LENGTH; |
| } |
| |
| if (cmd->resp_type & MMC_RSP_CRC) |
| flags |= DWMCI_CMD_CHECK_CRC; |
| |
| flags |= (cmd->cmdidx | DWMCI_CMD_START | DWMCI_CMD_USE_HOLD_REG); |
| |
| debug("Sending CMD%d\n",cmd->cmdidx); |
| |
| dwmci_writel(host, DWMCI_CMD, flags); |
| |
| for (i = 0; i < retry; i++) { |
| mask = dwmci_readl(host, DWMCI_RINTSTS); |
| if (mask & DWMCI_INTMSK_CDONE) { |
| if (!data) |
| dwmci_writel(host, DWMCI_RINTSTS, mask); |
| break; |
| } |
| } |
| |
| if (i == retry) { |
| debug("%s: Timeout.\n", __func__); |
| return TIMEOUT; |
| } |
| |
| if (mask & DWMCI_INTMSK_RTO) { |
| /* |
| * Timeout here is not necessarily fatal. (e)MMC cards |
| * will splat here when they receive CMD55 as they do |
| * not support this command and that is exactly the way |
| * to tell them apart from SD cards. Thus, this output |
| * below shall be debug(). eMMC cards also do not favor |
| * CMD8, please keep that in mind. |
| */ |
| debug("%s: Response Timeout.\n", __func__); |
| return TIMEOUT; |
| } else if (mask & DWMCI_INTMSK_RE) { |
| debug("%s: Response Error.\n", __func__); |
| return -EIO; |
| } |
| |
| |
| if (cmd->resp_type & MMC_RSP_PRESENT) { |
| if (cmd->resp_type & MMC_RSP_136) { |
| cmd->response[0] = dwmci_readl(host, DWMCI_RESP3); |
| cmd->response[1] = dwmci_readl(host, DWMCI_RESP2); |
| cmd->response[2] = dwmci_readl(host, DWMCI_RESP1); |
| cmd->response[3] = dwmci_readl(host, DWMCI_RESP0); |
| } else { |
| cmd->response[0] = dwmci_readl(host, DWMCI_RESP0); |
| } |
| } |
| |
| if (data) { |
| ret = dwmci_data_transfer(host, data); |
| |
| /* only dma mode need it */ |
| if (!host->fifo_mode) { |
| ctrl = dwmci_readl(host, DWMCI_CTRL); |
| ctrl &= ~(DWMCI_DMA_EN); |
| dwmci_writel(host, DWMCI_CTRL, ctrl); |
| bounce_buffer_stop(&bbstate); |
| } |
| } |
| |
| udelay(100); |
| |
| return ret; |
| } |
| |
| static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) |
| { |
| u32 div, status; |
| int timeout = 10000; |
| unsigned long sclk; |
| |
| if ((freq == host->clock) || (freq == 0)) |
| return 0; |
| /* |
| * If host->get_mmc_clk isn't defined, |
| * then assume that host->bus_hz is source clock value. |
| * host->bus_hz should be set by user. |
| */ |
| if (host->get_mmc_clk) |
| sclk = host->get_mmc_clk(host, freq); |
| else if (host->bus_hz) |
| sclk = host->bus_hz; |
| else { |
| debug("%s: Didn't get source clock value.\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (sclk == freq) |
| div = 0; /* bypass mode */ |
| else |
| div = DIV_ROUND_UP(sclk, 2 * freq); |
| |
| dwmci_writel(host, DWMCI_CLKENA, 0); |
| dwmci_writel(host, DWMCI_CLKSRC, 0); |
| |
| dwmci_writel(host, DWMCI_CLKDIV, div); |
| dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT | |
| DWMCI_CMD_UPD_CLK | DWMCI_CMD_START); |
| |
| do { |
| status = dwmci_readl(host, DWMCI_CMD); |
| if (timeout-- < 0) { |
| debug("%s: Timeout!\n", __func__); |
| return -ETIMEDOUT; |
| } |
| } while (status & DWMCI_CMD_START); |
| |
| dwmci_writel(host, DWMCI_CLKENA, DWMCI_CLKEN_ENABLE | |
| DWMCI_CLKEN_LOW_PWR); |
| |
| dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT | |
| DWMCI_CMD_UPD_CLK | DWMCI_CMD_START); |
| |
| timeout = 10000; |
| do { |
| status = dwmci_readl(host, DWMCI_CMD); |
| if (timeout-- < 0) { |
| debug("%s: Timeout!\n", __func__); |
| return -ETIMEDOUT; |
| } |
| } while (status & DWMCI_CMD_START); |
| |
| host->clock = freq; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_DM_MMC_OPS |
| static int dwmci_set_ios(struct udevice *dev) |
| { |
| struct mmc *mmc = mmc_get_mmc_dev(dev); |
| #else |
| static void dwmci_set_ios(struct mmc *mmc) |
| { |
| #endif |
| struct dwmci_host *host = (struct dwmci_host *)mmc->priv; |
| u32 ctype, regs; |
| |
| debug("Buswidth = %d, clock: %d\n", mmc->bus_width, mmc->clock); |
| |
| dwmci_setup_bus(host, mmc->clock); |
| switch (mmc->bus_width) { |
| case 8: |
| ctype = DWMCI_CTYPE_8BIT; |
| break; |
| case 4: |
| ctype = DWMCI_CTYPE_4BIT; |
| break; |
| default: |
| ctype = DWMCI_CTYPE_1BIT; |
| break; |
| } |
| |
| dwmci_writel(host, DWMCI_CTYPE, ctype); |
| |
| regs = dwmci_readl(host, DWMCI_UHS_REG); |
| if (mmc->ddr_mode) |
| regs |= DWMCI_DDR_MODE; |
| else |
| regs &= ~DWMCI_DDR_MODE; |
| |
| dwmci_writel(host, DWMCI_UHS_REG, regs); |
| |
| if (host->clksel) |
| host->clksel(host); |
| #ifdef CONFIG_DM_MMC_OPS |
| return 0; |
| #endif |
| } |
| |
| static int dwmci_init(struct mmc *mmc) |
| { |
| struct dwmci_host *host = mmc->priv; |
| |
| if (host->board_init) |
| host->board_init(host); |
| |
| dwmci_writel(host, DWMCI_PWREN, 1); |
| |
| if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) { |
| debug("%s[%d] Fail-reset!!\n", __func__, __LINE__); |
| return -EIO; |
| } |
| |
| /* Enumerate at 400KHz */ |
| dwmci_setup_bus(host, mmc->cfg->f_min); |
| |
| dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF); |
| dwmci_writel(host, DWMCI_INTMASK, 0); |
| |
| dwmci_writel(host, DWMCI_TMOUT, 0xFFFFFFFF); |
| |
| dwmci_writel(host, DWMCI_IDINTEN, 0); |
| dwmci_writel(host, DWMCI_BMOD, 1); |
| |
| if (!host->fifoth_val) { |
| uint32_t fifo_size; |
| |
| fifo_size = dwmci_readl(host, DWMCI_FIFOTH); |
| fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; |
| host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | |
| TX_WMARK(fifo_size / 2); |
| } |
| dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val); |
| |
| dwmci_writel(host, DWMCI_CLKENA, 0); |
| dwmci_writel(host, DWMCI_CLKSRC, 0); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_DM_MMC_OPS |
| int dwmci_probe(struct udevice *dev) |
| { |
| struct mmc *mmc = mmc_get_mmc_dev(dev); |
| |
| return dwmci_init(mmc); |
| } |
| |
| const struct dm_mmc_ops dm_dwmci_ops = { |
| .send_cmd = dwmci_send_cmd, |
| .set_ios = dwmci_set_ios, |
| }; |
| |
| #else |
| static const struct mmc_ops dwmci_ops = { |
| .send_cmd = dwmci_send_cmd, |
| .set_ios = dwmci_set_ios, |
| .init = dwmci_init, |
| }; |
| #endif |
| |
| void dwmci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, |
| uint caps, u32 max_clk, u32 min_clk) |
| { |
| cfg->name = name; |
| #ifndef CONFIG_DM_MMC_OPS |
| cfg->ops = &dwmci_ops; |
| #endif |
| cfg->f_min = min_clk; |
| cfg->f_max = max_clk; |
| |
| cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; |
| |
| cfg->host_caps = caps; |
| |
| if (buswidth == 8) { |
| cfg->host_caps |= MMC_MODE_8BIT; |
| cfg->host_caps &= ~MMC_MODE_4BIT; |
| } else { |
| cfg->host_caps |= MMC_MODE_4BIT; |
| cfg->host_caps &= ~MMC_MODE_8BIT; |
| } |
| cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz; |
| |
| cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; |
| } |
| |
| #ifdef CONFIG_BLK |
| int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg) |
| { |
| return mmc_bind(dev, mmc, cfg); |
| } |
| #else |
| int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk) |
| { |
| dwmci_setup_cfg(&host->cfg, host->name, host->buswidth, host->caps, |
| max_clk, min_clk); |
| |
| host->mmc = mmc_create(&host->cfg, host); |
| if (host->mmc == NULL) |
| return -1; |
| |
| return 0; |
| } |
| #endif |