| // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| /* |
| * P1020 Silicon/SoC Device Tree Source (post include) |
| * |
| * Copyright 2013 Freescale Semiconductor Inc. |
| * Copyright 2019 NXP |
| */ |
| |
| &soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "fsl,p1020-immr", "simple-bus"; |
| bus-frequency = <0x0>; |
| |
| usb@22000 { |
| compatible = "fsl-usb2-dr"; |
| reg = <0x22000 0x1000>; |
| phy_type = "ulpi"; |
| }; |
| |
| usb@23000 { |
| compatible = "fsl-usb2-dr"; |
| reg = <0x23000 0x1000>; |
| phy_type = "ulpi"; |
| }; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <4>; |
| reg = <0x40000 0x40000>; |
| compatible = "fsl,mpic"; |
| device_type = "open-pic"; |
| big-endian; |
| single-cpu-affinity; |
| last-interrupt-source = <255>; |
| }; |
| |
| esdhc: sdhc@2e000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x2e000 0x1000>; |
| /* Filled in by U-Boot */ |
| clock-frequency = <0>; |
| }; |
| |
| espi0: spi@7000 { |
| compatible = "fsl,mpc8536-espi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x7000 0x1000>; |
| fsl,espi-num-chipselects = <4>; |
| status = "disabled"; |
| }; |
| |
| /include/ "pq3-i2c-0.dtsi" |
| /include/ "pq3-i2c-1.dtsi" |
| |
| /include/ "pq3-etsec2-0.dtsi" |
| enet0: enet0_grp2: ethernet@b0000 { |
| }; |
| |
| /include/ "pq3-etsec2-1.dtsi" |
| enet1: enet1_grp2: ethernet@b1000 { |
| }; |
| |
| /include/ "pq3-etsec2-2.dtsi" |
| enet2: enet2_grp2: ethernet@b2000 { |
| }; |
| }; |
| |
| /include/ "pq3-etsec2-grp2-0.dtsi" |
| /include/ "pq3-etsec2-grp2-1.dtsi" |
| /include/ "pq3-etsec2-grp2-2.dtsi" |
| |
| /* PCIe controller base address 0x9000 */ |
| &pci1 { |
| compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq"; |
| law_trgt_if = <1>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| }; |
| |
| /* PCIe controller base address 0xa000 */ |
| &pci0 { |
| compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq"; |
| law_trgt_if = <2>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| }; |