| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Sun6i platform dram controller init. |
| * |
| * (C) Copyright 2007-2012 |
| * Allwinner Technology Co., Ltd. <www.allwinnertech.com> |
| * Berg Xing <bergxing@allwinnertech.com> |
| * Tom Cubie <tangliang@allwinnertech.com> |
| * |
| * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com> |
| */ |
| #include <common.h> |
| #include <errno.h> |
| #include <init.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/dram.h> |
| #include <asm/arch/prcm.h> |
| #include <linux/delay.h> |
| |
| #define DRAM_CLK (CONFIG_DRAM_CLK * 1000000) |
| |
| struct dram_sun6i_para { |
| u8 bus_width; |
| u8 chan; |
| u8 rank; |
| u8 rows; |
| u16 page_size; |
| }; |
| |
| static void mctl_sys_init(void) |
| { |
| struct sunxi_ccm_reg * const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| const int dram_clk_div = 2; |
| |
| clock_set_pll5(DRAM_CLK * dram_clk_div, false); |
| |
| clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV0_MASK, |
| CCM_DRAMCLK_CFG_DIV0(dram_clk_div) | CCM_DRAMCLK_CFG_RST | |
| CCM_DRAMCLK_CFG_UPD); |
| mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0); |
| |
| writel(MDFS_CLK_DEFAULT, &ccm->mdfs_clk_cfg); |
| |
| /* deassert mctl reset */ |
| setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL); |
| |
| /* enable mctl clock */ |
| setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL); |
| } |
| |
| static void mctl_dll_init(int ch_index, struct dram_sun6i_para *para) |
| { |
| struct sunxi_mctl_phy_reg *mctl_phy; |
| |
| if (ch_index == 0) |
| mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; |
| else |
| mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE; |
| |
| /* disable + reset dlls */ |
| writel(MCTL_DLLCR_DISABLE, &mctl_phy->acdllcr); |
| writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx0dllcr); |
| writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx1dllcr); |
| if (para->bus_width == 32) { |
| writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx2dllcr); |
| writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx3dllcr); |
| } |
| udelay(2); |
| |
| /* enable + reset dlls */ |
| writel(0, &mctl_phy->acdllcr); |
| writel(0, &mctl_phy->dx0dllcr); |
| writel(0, &mctl_phy->dx1dllcr); |
| if (para->bus_width == 32) { |
| writel(0, &mctl_phy->dx2dllcr); |
| writel(0, &mctl_phy->dx3dllcr); |
| } |
| udelay(22); |
| |
| /* enable and release reset of dlls */ |
| writel(MCTL_DLLCR_NRESET, &mctl_phy->acdllcr); |
| writel(MCTL_DLLCR_NRESET, &mctl_phy->dx0dllcr); |
| writel(MCTL_DLLCR_NRESET, &mctl_phy->dx1dllcr); |
| if (para->bus_width == 32) { |
| writel(MCTL_DLLCR_NRESET, &mctl_phy->dx2dllcr); |
| writel(MCTL_DLLCR_NRESET, &mctl_phy->dx3dllcr); |
| } |
| udelay(22); |
| } |
| |
| static bool mctl_rank_detect(u32 *gsr0, int rank) |
| { |
| const u32 done = MCTL_DX_GSR0_RANK0_TRAIN_DONE << rank; |
| const u32 err = MCTL_DX_GSR0_RANK0_TRAIN_ERR << rank; |
| |
| mctl_await_completion(gsr0, done, done); |
| mctl_await_completion(gsr0 + 0x10, done, done); |
| |
| return !(readl(gsr0) & err) && !(readl(gsr0 + 0x10) & err); |
| } |
| |
| static void mctl_channel_init(int ch_index, struct dram_sun6i_para *para) |
| { |
| struct sunxi_mctl_com_reg * const mctl_com = |
| (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; |
| struct sunxi_mctl_ctl_reg *mctl_ctl; |
| struct sunxi_mctl_phy_reg *mctl_phy; |
| |
| if (ch_index == 0) { |
| mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; |
| mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; |
| } else { |
| mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL1_BASE; |
| mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE; |
| } |
| |
| writel(MCTL_MCMD_NOP, &mctl_ctl->mcmd); |
| mctl_await_completion(&mctl_ctl->mcmd, MCTL_MCMD_BUSY, 0); |
| |
| /* PHY initialization */ |
| writel(MCTL_PGCR, &mctl_phy->pgcr); |
| writel(MCTL_MR0, &mctl_phy->mr0); |
| writel(MCTL_MR1, &mctl_phy->mr1); |
| writel(MCTL_MR2, &mctl_phy->mr2); |
| writel(MCTL_MR3, &mctl_phy->mr3); |
| |
| writel((MCTL_TITMSRST << 18) | (MCTL_TDLLLOCK << 6) | MCTL_TDLLSRST, |
| &mctl_phy->ptr0); |
| |
| writel((MCTL_TDINIT1 << 19) | MCTL_TDINIT0, &mctl_phy->ptr1); |
| writel((MCTL_TDINIT3 << 17) | MCTL_TDINIT2, &mctl_phy->ptr2); |
| |
| writel((MCTL_TCCD << 31) | (MCTL_TRC << 25) | (MCTL_TRRD << 21) | |
| (MCTL_TRAS << 16) | (MCTL_TRCD << 12) | (MCTL_TRP << 8) | |
| (MCTL_TWTR << 5) | (MCTL_TRTP << 2) | (MCTL_TMRD << 0), |
| &mctl_phy->dtpr0); |
| |
| writel((MCTL_TDQSCKMAX << 27) | (MCTL_TDQSCK << 24) | |
| (MCTL_TRFC << 16) | (MCTL_TRTODT << 11) | |
| ((MCTL_TMOD - 12) << 9) | (MCTL_TFAW << 3) | (0 << 2) | |
| (MCTL_TAOND << 0), &mctl_phy->dtpr1); |
| |
| writel((MCTL_TDLLK << 19) | (MCTL_TCKE << 15) | (MCTL_TXPDLL << 10) | |
| (MCTL_TEXSR << 0), &mctl_phy->dtpr2); |
| |
| writel(1, &mctl_ctl->dfitphyupdtype0); |
| writel(MCTL_DCR_DDR3, &mctl_phy->dcr); |
| writel(MCTL_DSGCR, &mctl_phy->dsgcr); |
| writel(MCTL_DXCCR, &mctl_phy->dxccr); |
| writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx0gcr); |
| writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx1gcr); |
| writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx2gcr); |
| writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx3gcr); |
| |
| mctl_await_completion(&mctl_phy->pgsr, 0x03, 0x03); |
| |
| writel(CONFIG_DRAM_ZQ, &mctl_phy->zq0cr1); |
| |
| setbits_le32(&mctl_phy->pir, MCTL_PIR_CLEAR_STATUS); |
| writel(MCTL_PIR_STEP1, &mctl_phy->pir); |
| udelay(10); |
| mctl_await_completion(&mctl_phy->pgsr, 0x1f, 0x1f); |
| |
| /* rank detect */ |
| if (!mctl_rank_detect(&mctl_phy->dx0gsr0, 1)) { |
| para->rank = 1; |
| clrbits_le32(&mctl_phy->pgcr, MCTL_PGCR_RANK); |
| } |
| |
| /* |
| * channel detect, check channel 1 dx0 and dx1 have rank 0, if not |
| * assume nothing is connected to channel 1. |
| */ |
| if (ch_index == 1 && !mctl_rank_detect(&mctl_phy->dx0gsr0, 0)) { |
| para->chan = 1; |
| clrbits_le32(&mctl_com->ccr, MCTL_CCR_CH1_CLK_EN); |
| return; |
| } |
| |
| /* bus width detect, if dx2 and dx3 don't have rank 0, assume 16 bit */ |
| if (!mctl_rank_detect(&mctl_phy->dx2gsr0, 0)) { |
| para->bus_width = 16; |
| para->page_size = 2048; |
| setbits_le32(&mctl_phy->dx2dllcr, MCTL_DLLCR_DISABLE); |
| setbits_le32(&mctl_phy->dx3dllcr, MCTL_DLLCR_DISABLE); |
| clrbits_le32(&mctl_phy->dx2gcr, MCTL_DX_GCR_EN); |
| clrbits_le32(&mctl_phy->dx3gcr, MCTL_DX_GCR_EN); |
| } |
| |
| setbits_le32(&mctl_phy->pir, MCTL_PIR_CLEAR_STATUS); |
| writel(MCTL_PIR_STEP2, &mctl_phy->pir); |
| udelay(10); |
| mctl_await_completion(&mctl_phy->pgsr, 0x11, 0x11); |
| |
| if (readl(&mctl_phy->pgsr) & MCTL_PGSR_TRAIN_ERR_MASK) |
| panic("Training error initialising DRAM\n"); |
| |
| /* Move to configure state */ |
| writel(MCTL_SCTL_CONFIG, &mctl_ctl->sctl); |
| mctl_await_completion(&mctl_ctl->sstat, 0x07, 0x01); |
| |
| /* Set number of clks per micro-second */ |
| writel(DRAM_CLK / 1000000, &mctl_ctl->togcnt1u); |
| /* Set number of clks per 100 nano-seconds */ |
| writel(DRAM_CLK / 10000000, &mctl_ctl->togcnt100n); |
| /* Set memory timing registers */ |
| writel(MCTL_TREFI, &mctl_ctl->trefi); |
| writel(MCTL_TMRD, &mctl_ctl->tmrd); |
| writel(MCTL_TRFC, &mctl_ctl->trfc); |
| writel((MCTL_TPREA << 16) | MCTL_TRP, &mctl_ctl->trp); |
| writel(MCTL_TRTW, &mctl_ctl->trtw); |
| writel(MCTL_TAL, &mctl_ctl->tal); |
| writel(MCTL_TCL, &mctl_ctl->tcl); |
| writel(MCTL_TCWL, &mctl_ctl->tcwl); |
| writel(MCTL_TRAS, &mctl_ctl->tras); |
| writel(MCTL_TRC, &mctl_ctl->trc); |
| writel(MCTL_TRCD, &mctl_ctl->trcd); |
| writel(MCTL_TRRD, &mctl_ctl->trrd); |
| writel(MCTL_TRTP, &mctl_ctl->trtp); |
| writel(MCTL_TWR, &mctl_ctl->twr); |
| writel(MCTL_TWTR, &mctl_ctl->twtr); |
| writel(MCTL_TEXSR, &mctl_ctl->texsr); |
| writel(MCTL_TXP, &mctl_ctl->txp); |
| writel(MCTL_TXPDLL, &mctl_ctl->txpdll); |
| writel(MCTL_TZQCS, &mctl_ctl->tzqcs); |
| writel(MCTL_TZQCSI, &mctl_ctl->tzqcsi); |
| writel(MCTL_TDQS, &mctl_ctl->tdqs); |
| writel(MCTL_TCKSRE, &mctl_ctl->tcksre); |
| writel(MCTL_TCKSRX, &mctl_ctl->tcksrx); |
| writel(MCTL_TCKE, &mctl_ctl->tcke); |
| writel(MCTL_TMOD, &mctl_ctl->tmod); |
| writel(MCTL_TRSTL, &mctl_ctl->trstl); |
| writel(MCTL_TZQCL, &mctl_ctl->tzqcl); |
| writel(MCTL_TMRR, &mctl_ctl->tmrr); |
| writel(MCTL_TCKESR, &mctl_ctl->tckesr); |
| writel(MCTL_TDPD, &mctl_ctl->tdpd); |
| |
| /* Unknown magic performed by boot0 */ |
| setbits_le32(&mctl_ctl->dfiodtcfg, 1 << 3); |
| clrbits_le32(&mctl_ctl->dfiodtcfg1, 0x1f); |
| |
| /* Select 16/32-bits mode for MCTL */ |
| if (para->bus_width == 16) |
| setbits_le32(&mctl_ctl->ppcfg, 1); |
| |
| /* Set DFI timing registers */ |
| writel(MCTL_TCWL, &mctl_ctl->dfitphywrl); |
| writel(MCTL_TCL - 1, &mctl_ctl->dfitrdden); |
| writel(MCTL_DFITPHYRDL, &mctl_ctl->dfitphyrdl); |
| writel(MCTL_DFISTCFG0, &mctl_ctl->dfistcfg0); |
| |
| writel(MCTL_MCFG_DDR3, &mctl_ctl->mcfg); |
| |
| /* DFI update configuration register */ |
| writel(MCTL_DFIUPDCFG_UPD, &mctl_ctl->dfiupdcfg); |
| |
| /* Move to access state */ |
| writel(MCTL_SCTL_ACCESS, &mctl_ctl->sctl); |
| mctl_await_completion(&mctl_ctl->sstat, 0x07, 0x03); |
| } |
| |
| static void mctl_com_init(struct dram_sun6i_para *para) |
| { |
| struct sunxi_mctl_com_reg * const mctl_com = |
| (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; |
| struct sunxi_mctl_phy_reg * const mctl_phy1 = |
| (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE; |
| struct sunxi_prcm_reg * const prcm = |
| (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; |
| |
| writel(MCTL_CR_UNKNOWN | MCTL_CR_CHANNEL(para->chan) | MCTL_CR_DDR3 | |
| ((para->bus_width == 32) ? MCTL_CR_BUSW32 : MCTL_CR_BUSW16) | |
| MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) | |
| MCTL_CR_BANK(1) | MCTL_CR_RANK(para->rank), &mctl_com->cr); |
| |
| /* Unknown magic performed by boot0 */ |
| setbits_le32(&mctl_com->dbgcr, (1 << 6)); |
| |
| if (para->chan == 1) { |
| /* Shutdown channel 1 */ |
| setbits_le32(&mctl_phy1->aciocr, MCTL_ACIOCR_DISABLE); |
| setbits_le32(&mctl_phy1->dxccr, MCTL_DXCCR_DISABLE); |
| clrbits_le32(&mctl_phy1->dsgcr, MCTL_DSGCR_ENABLE); |
| /* |
| * CH0 ?? this is what boot0 does. Leave as is until we can |
| * confirm this. |
| */ |
| setbits_le32(&prcm->vdd_sys_pwroff, |
| PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF); |
| } |
| } |
| |
| static void mctl_port_cfg(void) |
| { |
| struct sunxi_mctl_com_reg * const mctl_com = |
| (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; |
| struct sunxi_ccm_reg * const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| |
| /* enable DRAM AXI clock for CPU access */ |
| setbits_le32(&ccm->axi_gate, 1 << AXI_GATE_OFFSET_DRAM); |
| |
| /* Bunch of magic writes performed by boot0 */ |
| writel(0x00400302, &mctl_com->rmcr[0]); |
| writel(0x01000307, &mctl_com->rmcr[1]); |
| writel(0x00400302, &mctl_com->rmcr[2]); |
| writel(0x01000307, &mctl_com->rmcr[3]); |
| writel(0x01000307, &mctl_com->rmcr[4]); |
| writel(0x01000303, &mctl_com->rmcr[6]); |
| writel(0x01000303, &mctl_com->mmcr[0]); |
| writel(0x00400310, &mctl_com->mmcr[1]); |
| writel(0x01000307, &mctl_com->mmcr[2]); |
| writel(0x01000303, &mctl_com->mmcr[3]); |
| writel(0x01800303, &mctl_com->mmcr[4]); |
| writel(0x01800303, &mctl_com->mmcr[5]); |
| writel(0x01800303, &mctl_com->mmcr[6]); |
| writel(0x01800303, &mctl_com->mmcr[7]); |
| writel(0x01000303, &mctl_com->mmcr[8]); |
| writel(0x00000002, &mctl_com->mmcr[15]); |
| writel(0x00000310, &mctl_com->mbagcr[0]); |
| writel(0x00400310, &mctl_com->mbagcr[1]); |
| writel(0x00400310, &mctl_com->mbagcr[2]); |
| writel(0x00000307, &mctl_com->mbagcr[3]); |
| writel(0x00000317, &mctl_com->mbagcr[4]); |
| writel(0x00000307, &mctl_com->mbagcr[5]); |
| } |
| |
| unsigned long sunxi_dram_init(void) |
| { |
| struct sunxi_mctl_com_reg * const mctl_com = |
| (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; |
| u32 offset; |
| int bank, bus, columns; |
| |
| /* Set initial parameters, these get modified by the autodetect code */ |
| struct dram_sun6i_para para = { |
| .bus_width = 32, |
| .chan = 2, |
| .rank = 2, |
| .page_size = 4096, |
| .rows = 16, |
| }; |
| |
| /* A31s only has one channel */ |
| if (sunxi_get_ss_bonding_id() == SUNXI_SS_BOND_ID_A31S) |
| para.chan = 1; |
| |
| mctl_sys_init(); |
| |
| mctl_dll_init(0, ¶); |
| setbits_le32(&mctl_com->ccr, MCTL_CCR_CH0_CLK_EN); |
| |
| if (para.chan == 2) { |
| mctl_dll_init(1, ¶); |
| setbits_le32(&mctl_com->ccr, MCTL_CCR_CH1_CLK_EN); |
| } |
| |
| setbits_le32(&mctl_com->ccr, MCTL_CCR_MASTER_CLK_EN); |
| |
| mctl_channel_init(0, ¶); |
| if (para.chan == 2) |
| mctl_channel_init(1, ¶); |
| |
| mctl_com_init(¶); |
| mctl_port_cfg(); |
| |
| /* |
| * Change to 1 ch / sequence / 8192 byte pages / 16 rows / |
| * 8 bit banks / 1 rank mode. |
| */ |
| clrsetbits_le32(&mctl_com->cr, |
| MCTL_CR_CHANNEL_MASK | MCTL_CR_PAGE_SIZE_MASK | |
| MCTL_CR_ROW_MASK | MCTL_CR_BANK_MASK | MCTL_CR_RANK_MASK, |
| MCTL_CR_CHANNEL(1) | MCTL_CR_SEQUENCE | |
| MCTL_CR_PAGE_SIZE(8192) | MCTL_CR_ROW(16) | |
| MCTL_CR_BANK(1) | MCTL_CR_RANK(1)); |
| |
| /* Detect and set page size */ |
| for (columns = 7; columns < 20; columns++) { |
| if (mctl_mem_matches(1 << columns)) |
| break; |
| } |
| bus = (para.bus_width == 32) ? 2 : 1; |
| columns -= bus; |
| para.page_size = (1 << columns) * (bus << 1); |
| clrsetbits_le32(&mctl_com->cr, MCTL_CR_PAGE_SIZE_MASK, |
| MCTL_CR_PAGE_SIZE(para.page_size)); |
| |
| /* Detect and set rows */ |
| for (para.rows = 11; para.rows < 16; para.rows++) { |
| offset = 1 << (para.rows + columns + bus); |
| if (mctl_mem_matches(offset)) |
| break; |
| } |
| clrsetbits_le32(&mctl_com->cr, MCTL_CR_ROW_MASK, |
| MCTL_CR_ROW(para.rows)); |
| |
| /* Detect bank size */ |
| offset = 1 << (para.rows + columns + bus + 2); |
| bank = mctl_mem_matches(offset) ? 0 : 1; |
| |
| /* Restore interleave, chan and rank values, set bank size */ |
| clrsetbits_le32(&mctl_com->cr, |
| MCTL_CR_CHANNEL_MASK | MCTL_CR_SEQUENCE | |
| MCTL_CR_BANK_MASK | MCTL_CR_RANK_MASK, |
| MCTL_CR_CHANNEL(para.chan) | MCTL_CR_BANK(bank) | |
| MCTL_CR_RANK(para.rank)); |
| |
| return 1 << (para.rank + para.rows + bank + columns + para.chan + bus); |
| } |