board/tqm8xx/tqm8xx.c - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2000, 2001, 2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <mpc8xx.h>

 /* ------------------------------------------------------------------------- */

 static long int dram_size (long int, long int *, long int);

 /* ------------------------------------------------------------------------- */

 #define	_NOT_USED_	0xFFFFFFFF

 const uint sdram_table[] =
 {
 	/*
 	 * Single Read. (Offset 0 in UPMA RAM)
 	 */
 	0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00,
 	0x1FF5FC47, /* last */
 	/*
 	 * SDRAM Initialization (offset 5 in UPMA RAM)
 	 *
 	 * This is no UPM entry point. The following definition uses
 	 * the remaining space to establish an initialization
 	 * sequence, which is executed by a RUN command.
 	 *
 	 */
 		    0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
 	/*
 	 * Burst Read. (Offset 8 in UPMA RAM)
 	 */
 	0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
 	0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	/*
 	 * Single Write. (Offset 18 in UPMA RAM)
 	 */
 	0x1F0DFC04, 0xEEABBC00, 0x01B27C04, 0x1FF5FC47, /* last */
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	/*
 	 * Burst Write. (Offset 20 in UPMA RAM)
 	 */
 	0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
 	0xF0AFFC00, 0xE1BAFC04, 0x1FF5FC47, /* last */
 					    _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	/*
 	 * Refresh  (Offset 30 in UPMA RAM)
 	 */
 	0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
 	0xFFFFFC84, 0xFFFFFC07, /* last */
 				_NOT_USED_, _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	/*
 	 * Exception. (Offset 3c in UPMA RAM)
 	 */
 	0x7FFFFC07, /* last */
 		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
 };

 /* ------------------------------------------------------------------------- */


 /*
  * Check Board Identity:
  *
  * Test TQ ID string (TQM8xx...)
  * If present, check for "L" type (no second DRAM bank),
  * otherwise "L" type is assumed as default.
  *
  * Set board_type to 'L' for "L" type, 0 else.
  */

 int checkboard (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;

 	unsigned char *s = getenv ("serial#");

 	puts ("Board: ");

 	if (!s || strncmp (s, "TQM8", 4)) {
 		puts ("### No HW ID - assuming TQM8xxL\n");
 		return (0);
 	}

 	if ((*(s + 6) == 'L')) {	/* a TQM8xxL type */
 		gd->board_type = 'L';
 	}

 	for (; *s; ++s) {
 		if (*s == ' ')
 			break;
 		putc (*s);
 	}
 	putc ('\n');

 	return (0);
 }

 /* ------------------------------------------------------------------------- */

 long int initdram (int board_type)
 {
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size8, size9;
 	long int size_b0 = 0;
 	long int size_b1 = 0;

 	upmconfig (UPMA, (uint *) sdram_table,
 			   sizeof (sdram_table) / sizeof (uint));

 	/*
 	 * Preliminary prescaler for refresh (depends on number of
 	 * banks): This value is selected for four cycles every 62.4 us
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
 	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;

 	/*
 	 * The following value is used as an address (i.e. opcode) for
 	 * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
 	 * the port size is 32bit the SDRAM does NOT "see" the lower two
 	 * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
 	 * MICRON SDRAMs:
 	 * ->    0 00 010 0 010
 	 *       |  |   | |   +- Burst Length = 4
 	 *       |  |   | +----- Burst Type   = Sequential
 	 *       |  |   +------- CAS Latency  = 2
 	 *       |  +----------- Operating Mode = Standard
 	 *       +-------------- Write Burst Mode = Programmed Burst Length
 	 */
 	memctl->memc_mar = 0x00000088;

 	/*
 	 * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
 	 * preliminary addresses - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
 	memctl->memc_or2 = CFG_OR2_PRELIM;
 	memctl->memc_br2 = CFG_BR2_PRELIM;

 #ifndef	CONFIG_CAN_DRIVER
 	if (board_type != 'L') {	/* "L" type boards have only one bank SDRAM */
 		memctl->memc_or3 = CFG_OR3_PRELIM;
 		memctl->memc_br3 = CFG_BR3_PRELIM;
 	}
 #endif							/* CONFIG_CAN_DRIVER */

 	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */

 	udelay (200);

 	/* perform SDRAM initializsation sequence */

 	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 0 */
 	udelay (1);
 	memctl->memc_mcr = 0x80004230;	/* SDRAM bank 0 - execute twice */
 	udelay (1);

 #ifndef	CONFIG_CAN_DRIVER
 	if (board_type != 'L') {	/* "L" type boards have only one bank SDRAM */
 		memctl->memc_mcr = 0x80006105;	/* SDRAM bank 1 */
 		udelay (1);
 		memctl->memc_mcr = 0x80006230;	/* SDRAM bank 1 - execute twice */
 		udelay (1);
 	}
 #endif							/* CONFIG_CAN_DRIVER */

 	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */

 	udelay (1000);

 	/*
 	 * Check Bank 0 Memory Size for re-configuration
 	 *
 	 * try 8 column mode
 	 */
 	size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE2_PRELIM,
 					   SDRAM_MAX_SIZE);

 	udelay (1000);

 	/*
 	 * try 9 column mode
 	 */
 	size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE2_PRELIM,
 					   SDRAM_MAX_SIZE);

 	if (size8 < size9) {		/* leave configuration at 9 columns */
 		size_b0 = size9;
 /*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {					/* back to 8 columns            */
 		size_b0 = size8;
 		memctl->memc_mamr = CFG_MAMR_8COL;
 		udelay (500);
 /*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}

 #ifndef	CONFIG_CAN_DRIVER
 	if (board_type != 'L') {	/* "L" type boards have only one bank SDRAM */
 		/*
 		 * Check Bank 1 Memory Size
 		 * use current column settings
 		 * [9 column SDRAM may also be used in 8 column mode,
 		 *  but then only half the real size will be used.]
 		 */
 		size_b1 =
 				dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM,
 						   SDRAM_MAX_SIZE);
 /*	debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20);	*/
 	} else {
 		size_b1 = 0;
 	}
 #endif							/* CONFIG_CAN_DRIVER */

 	udelay (1000);

 	/*
 	 * Adjust refresh rate depending on SDRAM type, both banks
 	 * For types > 128 MBit leave it at the current (fast) rate
 	 */
 	if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
 		/* reduce to 15.6 us (62.4 us / quad) */
 		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
 		udelay (1000);
 	}

 	/*
 	 * Final mapping: map bigger bank first
 	 */
 	if (size_b1 > size_b0) {	/* SDRAM Bank 1 is bigger - map first   */

 		memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
 		memctl->memc_br3 =
 				(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;

 		if (size_b0 > 0) {
 			/*
 			 * Position Bank 0 immediately above Bank 1
 			 */
 			memctl->memc_or2 =
 					((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
 			memctl->memc_br2 =
 					((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
 					+ size_b1;
 		} else {
 			unsigned long reg;

 			/*
 			 * No bank 0
 			 *
 			 * invalidate bank
 			 */
 			memctl->memc_br2 = 0;

 			/* adjust refresh rate depending on SDRAM type, one bank */
 			reg = memctl->memc_mptpr;
 			reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
 			memctl->memc_mptpr = reg;
 		}

 	} else {					/* SDRAM Bank 0 is bigger - map first   */

 		memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
 		memctl->memc_br2 =
 				(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;

 		if (size_b1 > 0) {
 			/*
 			 * Position Bank 1 immediately above Bank 0
 			 */
 			memctl->memc_or3 =
 					((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
 			memctl->memc_br3 =
 					((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
 					+ size_b0;
 		} else {
 			unsigned long reg;

 #ifndef	CONFIG_CAN_DRIVER
 			/*
 			 * No bank 1
 			 *
 			 * invalidate bank
 			 */
 			memctl->memc_br3 = 0;
 #endif							/* CONFIG_CAN_DRIVER */

 			/* adjust refresh rate depending on SDRAM type, one bank */
 			reg = memctl->memc_mptpr;
 			reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
 			memctl->memc_mptpr = reg;
 		}
 	}

 	udelay (10000);

 #ifdef	CONFIG_CAN_DRIVER
 	/* Initialize OR3 / BR3 */
 	memctl->memc_or3 = CFG_OR3_CAN;
 	memctl->memc_br3 = CFG_BR3_CAN;

 	/* Initialize MBMR */
 	memctl->memc_mbmr = MAMR_GPL_B4DIS;	/* GPL_B4 ouput line Disable */

 	/* Initialize UPMB for CAN: single read */
 	memctl->memc_mdr = 0xFFFFC004;
 	memctl->memc_mcr = 0x0100 | UPMB;

 	memctl->memc_mdr = 0x0FFFD004;
 	memctl->memc_mcr = 0x0101 | UPMB;

 	memctl->memc_mdr = 0x0FFFC000;
 	memctl->memc_mcr = 0x0102 | UPMB;

 	memctl->memc_mdr = 0x3FFFC004;
 	memctl->memc_mcr = 0x0103 | UPMB;

 	memctl->memc_mdr = 0xFFFFDC05;
 	memctl->memc_mcr = 0x0104 | UPMB;

 	/* Initialize UPMB for CAN: single write */
 	memctl->memc_mdr = 0xFFFCC004;
 	memctl->memc_mcr = 0x0118 | UPMB;

 	memctl->memc_mdr = 0xCFFCD004;
 	memctl->memc_mcr = 0x0119 | UPMB;

 	memctl->memc_mdr = 0x0FFCC000;
 	memctl->memc_mcr = 0x011A | UPMB;

 	memctl->memc_mdr = 0x7FFCC004;
 	memctl->memc_mcr = 0x011B | UPMB;

 	memctl->memc_mdr = 0xFFFDCC05;
 	memctl->memc_mcr = 0x011C | UPMB;
 #endif							/* CONFIG_CAN_DRIVER */

 #ifdef	CONFIG_ISP1362_USB
 	/* Initialize OR5 / BR5 */
 	memctl->memc_or5 = CFG_OR5_ISP1362;
 	memctl->memc_br5 = CFG_BR5_ISP1362;
 #endif							/* CONFIG_ISP1362_USB */


 	return (size_b0 + size_b1);
 }

 /* ------------------------------------------------------------------------- */

 /*
  * Check memory range for valid RAM. A simple memory test determines
  * the actually available RAM size between addresses `base' and
  * `base + maxsize'. Some (not all) hardware errors are detected:
  * - short between address lines
  * - short between data lines
  */

 static long int dram_size (long int mamr_value, long int *base,
 						   long int maxsize)
 {
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile long int *addr;
 	ulong cnt, val;
 	ulong save[32];				/* to make test non-destructive */
 	unsigned char i = 0;

 	memctl->memc_mamr = mamr_value;

 	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
 		addr = base + cnt;		/* pointer arith! */

 		save[i++] = *addr;
 		*addr = ~cnt;
 	}

 	/* write 0 to base address */
 	addr = base;
 	save[i] = *addr;
 	*addr = 0;

 	/* check at base address */
 	if ((val = *addr) != 0) {
 		*addr = save[i];
 		return (0);
 	}

 	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
 		addr = base + cnt;		/* pointer arith! */

 		val = *addr;
 		*addr = save[--i];

 		if (val != (~cnt)) {
 			return (cnt * sizeof (long));
 		}
 	}
 	return (maxsize);
 }

 /* ------------------------------------------------------------------------- */
	/*
	* (C) Copyright 2000, 2001, 2002
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <mpc8xx.h>

	/* ------------------------------------------------------------------------- */

	static long int dram_size (long int, long int *, long int);

	/* ------------------------------------------------------------------------- */

	#define _NOT_USED_ 0xFFFFFFFF

	const uint sdram_table[] =
	{
	/*
	* Single Read. (Offset 0 in UPMA RAM)
	*/
	0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00,
	0x1FF5FC47, /* last */
	/*
	* SDRAM Initialization (offset 5 in UPMA RAM)
	*
	* This is no UPM entry point. The following definition uses
	* the remaining space to establish an initialization
	* sequence, which is executed by a RUN command.
	*
	*/
	0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
	/*
	* Burst Read. (Offset 8 in UPMA RAM)
	*/
	0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
	0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */
	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
	/*
	* Single Write. (Offset 18 in UPMA RAM)
	*/
	0x1F0DFC04, 0xEEABBC00, 0x01B27C04, 0x1FF5FC47, /* last */
	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
	/*
	* Burst Write. (Offset 20 in UPMA RAM)
	*/
	0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
	0xF0AFFC00, 0xE1BAFC04, 0x1FF5FC47, /* last */
	_NOT_USED_,
	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
	/*
	* Refresh (Offset 30 in UPMA RAM)
	*/
	0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
	0xFFFFFC84, 0xFFFFFC07, /* last */
	_NOT_USED_, _NOT_USED_,
	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
	/*
	* Exception. (Offset 3c in UPMA RAM)
	*/
	0x7FFFFC07, /* last */
	_NOT_USED_, _NOT_USED_, _NOT_USED_,
	};

	/* ------------------------------------------------------------------------- */


	/*
	* Check Board Identity:
	*
	* Test TQ ID string (TQM8xx...)
	* If present, check for "L" type (no second DRAM bank),
	* otherwise "L" type is assumed as default.
	*
	* Set board_type to 'L' for "L" type, 0 else.
	*/

	int checkboard (void)
	{
	DECLARE_GLOBAL_DATA_PTR;

	unsigned char *s = getenv ("serial#");

	puts ("Board: ");

	if (!s \|\| strncmp (s, "TQM8", 4)) {
	puts ("### No HW ID - assuming TQM8xxL\n");
	return (0);
	}

	if (((s + 6) == 'L')) { / a TQM8xxL type */
	gd->board_type = 'L';
	}

	for (; *s; ++s) {
	if (*s == ' ')
	break;
	putc (*s);
	}
	putc ('\n');

	return (0);
	}

	/* ------------------------------------------------------------------------- */

	long int initdram (int board_type)
	{
	volatile immap_t immap = (immap_t ) CFG_IMMR;
	volatile memctl8xx_t *memctl = &immap->im_memctl;
	long int size8, size9;
	long int size_b0 = 0;
	long int size_b1 = 0;

	upmconfig (UPMA, (uint *) sdram_table,
	sizeof (sdram_table) / sizeof (uint));

	/*
	* Preliminary prescaler for refresh (depends on number of
	* banks): This value is selected for four cycles every 62.4 us
	* with two SDRAM banks or four cycles every 31.2 us with one
	* bank. It will be adjusted after memory sizing.
	*/
	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;

	/*
	* The following value is used as an address (i.e. opcode) for
	* the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
	* the port size is 32bit the SDRAM does NOT "see" the lower two
	* address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
	* MICRON SDRAMs:
	* -> 0 00 010 0 010
	* \| \| \| \| +- Burst Length = 4
	* \| \| \| +----- Burst Type = Sequential
	* \| \| +------- CAS Latency = 2
	* \| +----------- Operating Mode = Standard
	* +-------------- Write Burst Mode = Programmed Burst Length
	*/
	memctl->memc_mar = 0x00000088;

	/*
	* Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
	* preliminary addresses - these have to be modified after the
	* SDRAM size has been determined.
	*/
	memctl->memc_or2 = CFG_OR2_PRELIM;
	memctl->memc_br2 = CFG_BR2_PRELIM;

	#ifndef CONFIG_CAN_DRIVER
	if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */
	memctl->memc_or3 = CFG_OR3_PRELIM;
	memctl->memc_br3 = CFG_BR3_PRELIM;
	}
	#endif /* CONFIG_CAN_DRIVER */

	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */

	udelay (200);

	/* perform SDRAM initializsation sequence */

	memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
	udelay (1);
	memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
	udelay (1);

	#ifndef CONFIG_CAN_DRIVER
	if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */
	memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */
	udelay (1);
	memctl->memc_mcr = 0x80006230; /* SDRAM bank 1 - execute twice */
	udelay (1);
	}
	#endif /* CONFIG_CAN_DRIVER */

	memctl->memc_mamr \|= MAMR_PTAE; /* enable refresh */

	udelay (1000);

	/*
	* Check Bank 0 Memory Size for re-configuration
	*
	* try 8 column mode
	*/
	size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE2_PRELIM,
	SDRAM_MAX_SIZE);

	udelay (1000);

	/*
	* try 9 column mode
	*/
	size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE2_PRELIM,
	SDRAM_MAX_SIZE);

	if (size8 < size9) { /* leave configuration at 9 columns */
	size_b0 = size9;
	/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
	} else { /* back to 8 columns */
	size_b0 = size8;
	memctl->memc_mamr = CFG_MAMR_8COL;
	udelay (500);
	/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
	}

	#ifndef CONFIG_CAN_DRIVER
	if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */
	/*
	* Check Bank 1 Memory Size
	* use current column settings
	* [9 column SDRAM may also be used in 8 column mode,
	* but then only half the real size will be used.]
	*/
	size_b1 =
	dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM,
	SDRAM_MAX_SIZE);
	/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */
	} else {
	size_b1 = 0;
	}
	#endif /* CONFIG_CAN_DRIVER */

	udelay (1000);

	/*
	* Adjust refresh rate depending on SDRAM type, both banks
	* For types > 128 MBit leave it at the current (fast) rate
	*/
	if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
	/* reduce to 15.6 us (62.4 us / quad) */
	memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
	udelay (1000);
	}

	/*
	* Final mapping: map bigger bank first
	*/
	if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */

	memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) \| CFG_OR_TIMING_SDRAM;
	memctl->memc_br3 =
	(CFG_SDRAM_BASE & BR_BA_MSK) \| BR_MS_UPMA \| BR_V;

	if (size_b0 > 0) {
	/*
	* Position Bank 0 immediately above Bank 1
	*/
	memctl->memc_or2 =
	((-size_b0) & 0xFFFF0000) \| CFG_OR_TIMING_SDRAM;
	memctl->memc_br2 =
	((CFG_SDRAM_BASE & BR_BA_MSK) \| BR_MS_UPMA \| BR_V)
	+ size_b1;
	} else {
	unsigned long reg;

	/*
	* No bank 0
	*
	* invalidate bank
	*/
	memctl->memc_br2 = 0;

	/* adjust refresh rate depending on SDRAM type, one bank */
	reg = memctl->memc_mptpr;
	reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
	memctl->memc_mptpr = reg;
	}

	} else { /* SDRAM Bank 0 is bigger - map first */

	memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) \| CFG_OR_TIMING_SDRAM;
	memctl->memc_br2 =
	(CFG_SDRAM_BASE & BR_BA_MSK) \| BR_MS_UPMA \| BR_V;

	if (size_b1 > 0) {
	/*
	* Position Bank 1 immediately above Bank 0
	*/
	memctl->memc_or3 =
	((-size_b1) & 0xFFFF0000) \| CFG_OR_TIMING_SDRAM;
	memctl->memc_br3 =
	((CFG_SDRAM_BASE & BR_BA_MSK) \| BR_MS_UPMA \| BR_V)
	+ size_b0;
	} else {
	unsigned long reg;

	#ifndef CONFIG_CAN_DRIVER
	/*
	* No bank 1
	*
	* invalidate bank
	*/
	memctl->memc_br3 = 0;
	#endif /* CONFIG_CAN_DRIVER */

	/* adjust refresh rate depending on SDRAM type, one bank */
	reg = memctl->memc_mptpr;
	reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
	memctl->memc_mptpr = reg;
	}
	}

	udelay (10000);

	#ifdef CONFIG_CAN_DRIVER
	/* Initialize OR3 / BR3 */
	memctl->memc_or3 = CFG_OR3_CAN;
	memctl->memc_br3 = CFG_BR3_CAN;

	/* Initialize MBMR */
	memctl->memc_mbmr = MAMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */

	/* Initialize UPMB for CAN: single read */
	memctl->memc_mdr = 0xFFFFC004;
	memctl->memc_mcr = 0x0100 \| UPMB;

	memctl->memc_mdr = 0x0FFFD004;
	memctl->memc_mcr = 0x0101 \| UPMB;

	memctl->memc_mdr = 0x0FFFC000;
	memctl->memc_mcr = 0x0102 \| UPMB;

	memctl->memc_mdr = 0x3FFFC004;
	memctl->memc_mcr = 0x0103 \| UPMB;

	memctl->memc_mdr = 0xFFFFDC05;
	memctl->memc_mcr = 0x0104 \| UPMB;

	/* Initialize UPMB for CAN: single write */
	memctl->memc_mdr = 0xFFFCC004;
	memctl->memc_mcr = 0x0118 \| UPMB;

	memctl->memc_mdr = 0xCFFCD004;
	memctl->memc_mcr = 0x0119 \| UPMB;

	memctl->memc_mdr = 0x0FFCC000;
	memctl->memc_mcr = 0x011A \| UPMB;

	memctl->memc_mdr = 0x7FFCC004;
	memctl->memc_mcr = 0x011B \| UPMB;

	memctl->memc_mdr = 0xFFFDCC05;
	memctl->memc_mcr = 0x011C \| UPMB;
	#endif /* CONFIG_CAN_DRIVER */

	#ifdef CONFIG_ISP1362_USB
	/* Initialize OR5 / BR5 */
	memctl->memc_or5 = CFG_OR5_ISP1362;
	memctl->memc_br5 = CFG_BR5_ISP1362;
	#endif /* CONFIG_ISP1362_USB */


	return (size_b0 + size_b1);
	}

	/* ------------------------------------------------------------------------- */

	/*
	* Check memory range for valid RAM. A simple memory test determines
	* the actually available RAM size between addresses `base' and
	* `base + maxsize'. Some (not all) hardware errors are detected:
	* - short between address lines
	* - short between data lines
	*/

	static long int dram_size (long int mamr_value, long int *base,
	long int maxsize)
	{
	volatile immap_t immap = (immap_t ) CFG_IMMR;
	volatile memctl8xx_t *memctl = &immap->im_memctl;
	volatile long int *addr;
	ulong cnt, val;
	ulong save[32]; /* to make test non-destructive */
	unsigned char i = 0;

	memctl->memc_mamr = mamr_value;

	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
	addr = base + cnt; /* pointer arith! */

	save[i++] = *addr;
	*addr = ~cnt;
	}

	/* write 0 to base address */
	addr = base;
	save[i] = *addr;
	*addr = 0;

	/* check at base address */
	if ((val = *addr) != 0) {
	*addr = save[i];
	return (0);
	}

	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
	addr = base + cnt; /* pointer arith! */

	val = *addr;
	*addr = save[--i];

	if (val != (~cnt)) {
	return (cnt * sizeof (long));
	}
	}
	return (maxsize);
	}

	/* ------------------------------------------------------------------------- */