| /* |
| * NOTE: DAVICOM ethernet Physical layer |
| * |
| * Version: @(#)DM9161.h 1.0.0 01/10/2001 |
| * |
| * Authors: ATMEL Rousset |
| * |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| |
| /* DAVICOM PHYSICAL LAYER TRANSCEIVER DM9161 */ |
| |
| #define DM9161_BMCR 0 /* Basic Mode Control Register */ |
| #define DM9161_BMSR 1 /* Basic Mode Status Register */ |
| #define DM9161_PHYID1 2 /* PHY Idendifier Register 1 */ |
| #define DM9161_PHYID2 3 /* PHY Idendifier Register 2 */ |
| #define DM9161_ANAR 4 /* Auto_Negotiation Advertisement Register */ |
| #define DM9161_ANLPAR 5 /* Auto_negotiation Link Partner Ability Register */ |
| #define DM9161_ANER 6 /* Auto-negotiation Expansion Register */ |
| #define DM9161_DSCR 16 /* Specified Configuration Register */ |
| #define DM9161_DSCSR 17 /* Specified Configuration and Status Register */ |
| #define DM9161_10BTCSR 18 /* 10BASE-T Configuration and Satus Register */ |
| #define DM9161_MDINTR 21 /* Specified Interrupt Register */ |
| #define DM9161_RECR 22 /* Specified Receive Error Counter Register */ |
| #define DM9161_DISCR 23 /* Specified Disconnect Counter Register */ |
| #define DM9161_RLSR 24 /* Hardware Reset Latch State Register */ |
| |
| |
| /* --Bit definitions: DM9161_BMCR */ |
| #define DM9161_RESET (1 << 15) /* 1= Software Reset; 0=Normal Operation */ |
| #define DM9161_LOOPBACK (1 << 14) /* 1=loopback Enabled; 0=Normal Operation */ |
| #define DM9161_SPEED_SELECT (1 << 13) /* 1=100Mbps; 0=10Mbps */ |
| #define DM9161_AUTONEG (1 << 12) |
| #define DM9161_POWER_DOWN (1 << 11) |
| #define DM9161_ISOLATE (1 << 10) |
| #define DM9161_RESTART_AUTONEG (1 << 9) |
| #define DM9161_DUPLEX_MODE (1 << 8) |
| #define DM9161_COLLISION_TEST (1 << 7) |
| |
| /*--Bit definitions: DM9161_BMSR */ |
| #define DM9161_100BASE_T4 (1 << 15) |
| #define DM9161_100BASE_TX_FD (1 << 14) |
| #define DM9161_100BASE_T4_HD (1 << 13) |
| #define DM9161_10BASE_T_FD (1 << 12) |
| #define DM9161_10BASE_T_HD (1 << 11) |
| #define DM9161_MF_PREAMB_SUPPR (1 << 6) |
| #define DM9161_AUTONEG_COMP (1 << 5) |
| #define DM9161_REMOTE_FAULT (1 << 4) |
| #define DM9161_AUTONEG_ABILITY (1 << 3) |
| #define DM9161_LINK_STATUS (1 << 2) |
| #define DM9161_JABBER_DETECT (1 << 1) |
| #define DM9161_EXTEND_CAPAB (1 << 0) |
| |
| /*--definitions: DM9161_PHYID1 */ |
| #define DM9161_PHYID1_OUI 0x606E |
| #define DM9161_LSB_MASK 0x3F |
| |
| /*--Bit definitions: DM9161_ANAR, DM9161_ANLPAR */ |
| #define DM9161_NP (1 << 15) |
| #define DM9161_ACK (1 << 14) |
| #define DM9161_RF (1 << 13) |
| #define DM9161_FCS (1 << 10) |
| #define DM9161_T4 (1 << 9) |
| #define DM9161_TX_FDX (1 << 8) |
| #define DM9161_TX_HDX (1 << 7) |
| #define DM9161_10_FDX (1 << 6) |
| #define DM9161_10_HDX (1 << 5) |
| #define DM9161_AN_IEEE_802_3 0x0001 |
| |
| /*--Bit definitions: DM9161_ANER */ |
| #define DM9161_PDF (1 << 4) |
| #define DM9161_LP_NP_ABLE (1 << 3) |
| #define DM9161_NP_ABLE (1 << 2) |
| #define DM9161_PAGE_RX (1 << 1) |
| #define DM9161_LP_AN_ABLE (1 << 0) |
| |
| /*--Bit definitions: DM9161_DSCR */ |
| #define DM9161_BP4B5B (1 << 15) |
| #define DM9161_BP_SCR (1 << 14) |
| #define DM9161_BP_ALIGN (1 << 13) |
| #define DM9161_BP_ADPOK (1 << 12) |
| #define DM9161_REPEATER (1 << 11) |
| #define DM9161_TX (1 << 10) |
| #define DM9161_RMII_ENABLE (1 << 8) |
| #define DM9161_F_LINK_100 (1 << 7) |
| #define DM9161_SPLED_CTL (1 << 6) |
| #define DM9161_COLLED_CTL (1 << 5) |
| #define DM9161_RPDCTR_EN (1 << 4) |
| #define DM9161_SM_RST (1 << 3) |
| #define DM9161_MFP SC (1 << 2) |
| #define DM9161_SLEEP (1 << 1) |
| #define DM9161_RLOUT (1 << 0) |
| |
| /*--Bit definitions: DM9161_DSCSR */ |
| #define DM9161_100FDX (1 << 15) |
| #define DM9161_100HDX (1 << 14) |
| #define DM9161_10FDX (1 << 13) |
| #define DM9161_10HDX (1 << 12) |
| |
| /*--Bit definitions: DM9161_10BTCSR */ |
| #define DM9161_LP_EN (1 << 14) |
| #define DM9161_HBE (1 << 13) |
| #define DM9161_SQUELCH (1 << 12) |
| #define DM9161_JABEN (1 << 11) |
| #define DM9161_10BT_SER (1 << 10) |
| #define DM9161_POLR (1 << 0) |
| |
| |
| /*--Bit definitions: DM9161_MDINTR */ |
| #define DM9161_INTR_PEND (1 << 15) |
| #define DM9161_FDX_MASK (1 << 11) |
| #define DM9161_SPD_MASK (1 << 10) |
| #define DM9161_LINK_MASK (1 << 9) |
| #define DM9161_INTR_MASK (1 << 8) |
| #define DM9161_FDX_CHANGE (1 << 4) |
| #define DM9161_SPD_CHANGE (1 << 3) |
| #define DM9161_LINK_CHANGE (1 << 2) |
| #define DM9161_INTR_STATUS (1 << 0) |
| |
| |
| /****************** function prototypes **********************/ |
| static unsigned int dm9161_IsPhyConnected(AT91PS_EMAC p_mac); |
| static unsigned char dm9161_GetLinkSpeed(AT91PS_EMAC p_mac); |
| static unsigned char dm9161_AutoNegotiate(AT91PS_EMAC p_mac, int *status); |
| static unsigned char dm9161_InitPhy(AT91PS_EMAC p_mac); |